Merge pull request #1434 from AnHardt/LostInTranslation2

Introduction of a system to feed displays with the correct charsets. Example in language_de.h
This commit is contained in:
Scott Lahteine 2015-01-30 18:35:02 -08:00
commit b40dd814b0
3 changed files with 144 additions and 72 deletions

View File

@ -533,6 +533,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
//LCD and SD support //LCD and SD support
// Character based displays can have different extended charsets. If you see strange or missing characters on yours - try an other definition below.
#define DISPLAY_CHARSET_HD44870_JAPAN // "ääööüüß°"
//#define DISPLAY_CHARSET_HD44870_WESTERN // with better support for European languages. "ÄäÖöÜüß°"
//#define DISPLAY_CHARSET_DOGM // for full graphics display "ÄäÖÖÜÜß°"
//#define ULTRA_LCD //general LCD support, also 16x2 //#define ULTRA_LCD //general LCD support, also 16x2
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
//#define SDSUPPORT // Enable SD Card Support in Hardware Console //#define SDSUPPORT // Enable SD Card Support in Hardware Console

View File

@ -1,6 +1,8 @@
#ifndef LANGUAGE_H #ifndef LANGUAGE_H
#define LANGUAGE_H #define LANGUAGE_H
#include "Configuration.h"
#define LANGUAGE_CONCAT(M) #M #define LANGUAGE_CONCAT(M) #M
#define GENERATE_LANGUAGE_INCLUDE(M) LANGUAGE_CONCAT(language_##M.h) #define GENERATE_LANGUAGE_INCLUDE(M) LANGUAGE_CONCAT(language_##M.h)
@ -160,6 +162,71 @@
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!" #define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
// LCD Menu Messages
#define STR_Ae "Ae" // No charset known now. Default will be overruled when we know.
#define STR_ae "ae"
#define STR_Oe "Oe"
#define STR_oe "oe"
#define STR_Ue "Ue"
#define STR_ue "ue"
#define STR_sz "ss"
#define STR_Deg ""
#define STR_THERMOMETER "\302"
#ifdef DISPLAY_CHARSET_DOGM
#define STR_Ae "\304" // U8glib
#define STR_ae "\344"
#define STR_Oe "\326"
#define STR_oe STR_Oe
#define STR_Ue "\334"
#define STR_ue STR_Ue
#define STR_sz "\337"
#define STR_Deg "\260"
#define STR_THERMOMETER "\377"
#endif
#ifdef DISPLAY_CHARSET_HD44870_JAPAN // HD44870 ROM Code: A00 (Japan)
#define STR_ae "\xe1"
#define STR_Ae STR_ae
#define STR_oe "\357"
#define STR_Oe STR_oe
#define STR_ue "\365"
#define STR_Ue STR_ue
#define STR_sz "\342"
#define STR_Deg "\271"
#define STR_THERMOMETER "\302"
#endif
#ifdef DISPLAY_CHARSET_HD44870_WESTERN // HD44870 ROM Code: A02 (Western)
#define STR_Ae "\216"
#define STR_ae "\204"
#define STR_Oe "\211"
#define STR_oe "\204"
#define STR_Ue "\212"
#define STR_ue "\201"
#define STR_sz "\160"
#define STR_Deg "\337"
#define STR_THERMOMETER "\302"
#endif
/*
#define TESTSTRING000 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017"
#define TESTSTRING020 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
#define TESTSTRING040 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057"
#define TESTSTRING060 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077"
#define TESTSTRING100 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117"
#define TESTSTRING120 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137"
#define TESTSTRING140 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157"
#define TESTSTRING160 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177"
#define TESTSTRING200 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217"
#define TESTSTRING220 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237"
#define TESTSTRING240 "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257"
#define TESTSTRING260 "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277"
#define TESTSTRING300 "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
#define TESTSTRING320 "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
#define TESTSTRING340 "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
#define TESTSTRING360 "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377"
*/
#include LANGUAGE_INCLUDE #include LANGUAGE_INCLUDE
#endif //__LANGUAGE_H #endif //__LANGUAGE_H

View File

@ -9,97 +9,96 @@
#define LANGUAGE_DE_H #define LANGUAGE_DE_H
#define WELCOME_MSG MACHINE_NAME " Bereit." #define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_SD_INSERTED "SDKarte erkannt" #define MSG_SD_INSERTED "SDKarte erkannt."
#define MSG_SD_REMOVED "SDKarte entfernt" #define MSG_SD_REMOVED "SDKarte entfernt."
#define MSG_MAIN "Hauptmenü" #define MSG_MAIN "Hauptmen" STR_ue
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalt." #define MSG_DISABLE_STEPPERS "Motoren Aus" // M84
#define MSG_AUTO_HOME "Auto Nullpunkt" #define MSG_AUTO_HOME "Home" // G28
#define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_HOME_OFFSETS "Setze Home hier"
#define MSG_SET_ORIGIN "Setze Nullpunkt" #define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_PLA "Vorwärmen PLA" #define MSG_PREHEAT_PLA "Vorw" STR_ae "rmen PLA"
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA " #define MSG_PREHEAT_PLA_N "Vorw" STR_ae "rmen PLA "
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle" #define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" #define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein." #define MSG_PREHEAT_PLA_SETTINGS "Vorw" STR_ae "rm. PLA Ein."
#define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS "Vorw" STR_ae "rmen ABS"
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS " #define MSG_PREHEAT_ABS_N "Vorw" STR_ae "rmen ABS "
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle" #define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" #define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein." #define MSG_PREHEAT_ABS_SETTINGS "Vorw" STR_ae "rm. ABS Ein."
#define MSG_COOLDOWN "Abkühlen" #define MSG_COOLDOWN "Abk" STR_ue "hlen"
#define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_ON "Netzteil Ein"
#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_SWITCH_PS_OFF "Netzteil Aus"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_MOVE_AXIS "Bewegen"
#define MSG_MOVE_X "X bewegen" #define MSG_MOVE_X "X"
#define MSG_MOVE_Y "Y bewegen" #define MSG_MOVE_Y "Y"
#define MSG_MOVE_Z "Z bewegen" #define MSG_MOVE_Z "Z"
#define MSG_MOVE_E "Extruder" #define MSG_MOVE_E "E"
#define MSG_MOVE_01MM "0.1mm bewegen" #define MSG_MOVE_01MM " 0.1 mm"
#define MSG_MOVE_1MM "1mm bewegen" #define MSG_MOVE_1MM " 1.0 mm"
#define MSG_MOVE_10MM "10mm bewegen" #define MSG_MOVE_10MM "10.0 mm"
#define MSG_SPEED "Geschw" #define MSG_SPEED "Geschw."
#define MSG_NOZZLE "Düse" #define MSG_NOZZLE "D" STR_ue "se"
#define MSG_BED "Bett" #define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüftergeschw." #define MSG_FAN_SPEED "L" STR_ue "ftergeschw."
#define MSG_FLOW "Fluss" #define MSG_FLOW "Fluss"
#define MSG_CONTROL "Einstellungen" #define MSG_CONTROL "Einstellungen"
#define MSG_MIN "\002 Min" #define MSG_MIN STR_THERMOMETER " Min"
#define MSG_MAX "\002 Max" #define MSG_MAX STR_THERMOMETER " Max"
#define MSG_FACTOR "\002 Faktor" #define MSG_FACTOR STR_THERMOMETER " Faktor"
#define MSG_AUTOTEMP "AutoTemp" #define MSG_AUTOTEMP "AutoTemp"
#define MSG_ON "Ein" #define MSG_ON "Ein"
#define MSG_OFF "Aus" #define MSG_OFF "Aus"
#define MSG_PID_P "PID-P" #define MSG_PID_P "PID P"
#define MSG_PID_I "PID-I" #define MSG_PID_I "PID I"
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID D"
#define MSG_PID_C "PID-C" #define MSG_PID_C "PID C"
#define MSG_ACC "Acc" #define MSG_ACC "A"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "V xy jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "V z jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "V e jerk"
#define MSG_VMAX "Vmax " #define MSG_VMAX "V max " // space by purpose
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "V min"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax " #define MSG_AMAX "A max " // space by purpose
#define MSG_A_RETRACT "A-Retract" #define MSG_A_RETRACT "A Retract"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_XSTEPS "X steps/mm"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_YSTEPS "Y steps/mm"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_ZSTEPS "Z steps/mm"
#define MSG_ESTEPS "Esteps/mm" #define MSG_ESTEPS "E steps/mm"
#define MSG_TEMPERATURE "Temperatur" #define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung" #define MSG_MOTION "Bewegung"
#define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Filament D 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" #define MSG_FILAMENT_SIZE_EXTRUDER_1 "Filament D 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" #define MSG_FILAMENT_SIZE_EXTRUDER_2 "Filament D 3"
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "EPROM speichern" #define MSG_STORE_EPROM "EPROM speichern"
#define MSG_LOAD_EPROM "EPROM laden" #define MSG_LOAD_EPROM "EPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_RESTORE_FAILSAFE "Standardkonfig."
#define MSG_REFRESH "Aktualisieren" #define MSG_REFRESH "Aktualisieren"
#define MSG_WATCH "Beobachten" #define MSG_WATCH "Info"
#define MSG_PREPARE "Vorbereitung" #define MSG_PREPARE "Vorbereitung"
#define MSG_TUNE "Justierung" #define MSG_TUNE "Justierung"
#define MSG_PAUSE_PRINT "Druck anhalten" #define MSG_PAUSE_PRINT "SD-Druck Pause"
#define MSG_RESUME_PRINT "Druck fortsetz" #define MSG_RESUME_PRINT "SD-Druck Weiter"
#define MSG_STOP_PRINT "Druck stoppen" #define MSG_STOP_PRINT "SD-Druck Abbruch"
#define MSG_CARD_MENU "SDKarten Menü" #define MSG_CARD_MENU "SDKarte"
#define MSG_NO_CARD "Keine SDKarte" #define MSG_NO_CARD "Keine SDKarte"
#define MSG_DWELL "Warten..." #define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer" #define MSG_USERWAIT "Warte auf Nutzer."
#define MSG_RESUMING "Druck fortsetzung" #define MSG_RESUMING "Druck geht weiter"
#define MSG_PRINT_ABORTED "Print aborted" #define MSG_PRINT_ABORTED "Druck abgebrochen"
#define MSG_NO_MOVE "Kein Zug." #define MSG_NO_MOVE "Motoren Eingesch."
#define MSG_KILLED "KILLED" #define MSG_KILLED "KILLED."
#define MSG_STOPPED "GESTOPPT" #define MSG_STOPPED "ANGEHALTEN."
#define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
#define MSG_CONTROL_RETRACTF "Retract V" #define MSG_CONTROL_RETRACTF "Retract V"
@ -109,22 +108,22 @@
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD "Change SD-Card" #define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_ZPROBE_OUT "Sensor ausserhalb"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_POSITION_UNKNOWN "X/Y vor Z Homen."
#define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z" #define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein"
#ifdef DELTA_CALIBRATION_MENU #ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration" #define MSG_DELTA_CALIBRATE "Delta Kalibrieren"
#define MSG_DELTA_CALIBRATE_X "Calibrate X" #define MSG_DELTA_CALIBRATE_X "Kalibriere X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y" #define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z" #define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" #define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
#endif // DELTA_CALIBRATION_MENU #endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_DE_H #endif // LANGUAGE_DE_H