Merge pull request #6894 from thinkyhead/bf_lcd_draw_order

Fix LCD to draw after value changes
This commit is contained in:
Scott Lahteine 2017-05-30 00:02:00 -05:00 committed by GitHub
commit bad432add7
4 changed files with 40 additions and 43 deletions

View File

@ -191,7 +191,7 @@
// ask the user to resolve the issue
lcd_setstatusPGM(PSTR("Release button"), 99); // will never appear...
while (ubl_lcd_clicked()) idle(); // unless this loop happens
lcd_setstatusPGM(PSTR(""), -1);
lcd_reset_status();
return true;
}
@ -771,7 +771,7 @@
}
#if ENABLED(ULTRA_LCD)
lcd_setstatusPGM(PSTR(""), -1);
lcd_reset_status();
lcd_quick_feedback();
#endif

View File

@ -40,8 +40,6 @@
extern float destination[XYZE], current_position[XYZE];
void lcd_return_to_status();
bool lcd_clicked();
void lcd_implementation_clear();
void lcd_mesh_edit_setup(float initial);
float lcd_mesh_edit();
void lcd_z_offset_edit_setup(float);
@ -54,12 +52,6 @@
#define SIZE_OF_LITTLE_RAISE 1
#define BIG_RAISE_NOT_NEEDED 0
extern void lcd_status_screen();
typedef void (*screenFunc_t)();
extern void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder = 0);
extern void lcd_setstatus(const char* message, const bool persist);
extern void lcd_setstatusPGM(const char* message, const int8_t level);
int unified_bed_leveling::g29_verbose_level,
unified_bed_leveling::g29_phase_value,
unified_bed_leveling::g29_repetition_cnt,
@ -662,7 +654,7 @@
do_blocking_move_to_z(measured_z); // Get close to the bed, but leave some space so we don't damage anything
// The user is not going to be locking in a new Z-Offset very often so
// it won't be that painful to spin the Encoder Wheel for 1.5mm
lcd_implementation_clear();
lcd_refresh();
lcd_z_offset_edit_setup(measured_z);
KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -698,7 +690,7 @@
state.z_offset = measured_z;
lcd_implementation_clear();
lcd_refresh();
restore_ubl_active_state_and_leave();
}
}
@ -940,7 +932,7 @@
SERIAL_PROTOCOLPGM("Place shim under nozzle");
LCD_MESSAGEPGM("Place shim & measure"); // TODO: Make translatable string
lcd_goto_screen(lcd_status_screen);
lcd_return_to_status();
echo_and_take_a_measurement();
const float z1 = measure_point_with_encoder();
@ -979,7 +971,7 @@
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
do_blocking_move_to_xy(lx, ly);
lcd_goto_screen(lcd_status_screen);
lcd_return_to_status();
mesh_index_pair location;
do {
location = find_closest_mesh_point_of_type(INVALID, lx, ly, USE_NOZZLE_AS_REFERENCE, NULL, false);
@ -1456,7 +1448,7 @@
if (do_ubl_mesh_map) display_map(g29_map_type); // show the user which point is being adjusted
lcd_implementation_clear();
lcd_refresh();
lcd_mesh_edit_setup(new_z);
@ -1497,7 +1489,7 @@
z_values[location.x_index][location.y_index] = new_z;
lcd_implementation_clear();
lcd_refresh();
} while (location.x_index >= 0 && --g29_repetition_cnt > 0);

View File

@ -236,23 +236,23 @@ uint16_t max_display_update_time = 0;
* menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
*
*/
#define _MENU_ITEM_PART_1(TYPE, LABEL, ...) \
#define _MENU_ITEM_PART_1(TYPE, ...) \
if (_menuLineNr == _thisItemNr) { \
if (lcdDrawUpdate) \
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
if (lcd_clicked && encoderLine == _thisItemNr) {
#define _MENU_ITEM_PART_2(TYPE, ...) \
#define _MENU_ITEM_PART_2(TYPE, LABEL, ...) \
menu_action_ ## TYPE(__VA_ARGS__); \
if (screen_changed) return; \
} \
if (lcdDrawUpdate) \
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
} \
++_thisItemNr
#define MENU_ITEM(TYPE, LABEL, ...) do { \
_skipStatic = false; \
_MENU_ITEM_PART_1(TYPE, LABEL, ## __VA_ARGS__); \
_MENU_ITEM_PART_2(TYPE, ## __VA_ARGS__); \
_MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \
_MENU_ITEM_PART_2(TYPE, LABEL, ## __VA_ARGS__); \
} while(0)
#define MENU_BACK(LABEL) MENU_ITEM(back, LABEL, 0)
@ -281,10 +281,10 @@ uint16_t max_display_update_time = 0;
* MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item
*/
#define MENU_MULTIPLIER_ITEM(type, label, ...) do { \
_MENU_ITEM_PART_1(type, label, ## __VA_ARGS__); \
_MENU_ITEM_PART_1(type, ## __VA_ARGS__); \
encoderRateMultiplierEnabled = true; \
lastEncoderMovementMillis = 0; \
_MENU_ITEM_PART_2(type, ## __VA_ARGS__); \
_MENU_ITEM_PART_2(type, label, ## __VA_ARGS__); \
} while(0)
#else // !ENCODER_RATE_MULTIPLIER
@ -581,8 +581,6 @@ void lcd_status_screen() {
#endif
#endif // LCD_PROGRESS_BAR
lcd_implementation_status_screen();
#if ENABLED(ULTIPANEL)
if (lcd_clicked) {
@ -595,6 +593,7 @@ void lcd_status_screen() {
#endif
);
lcd_goto_screen(lcd_main_menu);
return;
}
#if ENABLED(ULTIPANEL_FEEDMULTIPLY)
@ -623,8 +622,12 @@ void lcd_status_screen() {
feedrate_percentage = constrain(feedrate_percentage, 10, 999);
#endif // ULTIPANEL
lcd_implementation_status_screen();
}
void lcd_reset_status() { lcd_setstatusPGM(PSTR(""), -1); }
/**
*
* draw the kill screen
@ -632,7 +635,7 @@ void lcd_status_screen() {
*/
void kill_screen(const char* lcd_msg) {
lcd_init();
lcd_setalertstatuspgm(lcd_msg);
lcd_setalertstatusPGM(lcd_msg);
#if ENABLED(DOGLCD)
u8g.firstPage();
do {
@ -704,7 +707,7 @@ void kill_screen(const char* lcd_msg) {
card.startFileprint();
print_job_timer.start();
#endif
lcd_setstatusPGM(PSTR(""), -1);
lcd_reset_status();
}
void lcd_sdcard_stop() {
@ -717,7 +720,8 @@ void kill_screen(const char* lcd_msg) {
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
#endif
wait_for_heatup = false;
lcd_setstatusPGM(PSTR(MSG_PRINT_PAUSED), -1);
lcd_setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1);
lcd_return_to_status();
}
#endif // SDSUPPORT
@ -1764,7 +1768,7 @@ void kill_screen(const char* lcd_msg) {
MENU_BACK(MSG_UBL_EDIT_MESH_MENU);
MENU_ITEM_EDIT(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9);
MENU_ITEM(function, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_adjust_height_cmd);
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -1778,7 +1782,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R T"));
MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_CLOSEST, PSTR("G29 P4 T"));
MENU_ITEM(submenu, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_height_adjust_menu);
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -1812,7 +1816,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
#endif
MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -1844,7 +1848,7 @@ void kill_screen(const char* lcd_msg) {
MENU_BACK(MSG_UBL_TOOLS);
MENU_ITEM(gcode, MSG_UBL_3POINT_MESH_LEVELING, PSTR("G29 J0"));
MENU_ITEM(submenu, MSG_UBL_GRID_MESH_LEVELING, _lcd_ubl_grid_level);
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -1876,7 +1880,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_amount_cmd);
MENU_ITEM(function, MSG_UBL_SMART_FILLIN, _lcd_ubl_smart_fillin_cmd);
MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0"));
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -1928,7 +1932,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C"));
MENU_ITEM(function, MSG_UBL_INVALIDATE_ALL, _lcd_ubl_invalidate);
MENU_ITEM(gcode, MSG_UBL_INVALIDATE_CLOSEST, PSTR("G29 I"));
MENU_ITEM(submenu, MSG_WATCH, lcd_status_screen);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -4158,7 +4162,7 @@ void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) {
lcd_finishstatus(level > 0);
}
void lcd_setalertstatuspgm(const char * const message) {
void lcd_setalertstatusPGM(const char * const message) {
lcd_setstatusPGM(message, 1);
#if ENABLED(ULTIPANEL)
lcd_return_to_status();

View File

@ -39,8 +39,8 @@
bool lcd_hasstatus();
void lcd_setstatus(const char* message, const bool persist=false);
void lcd_setstatusPGM(const char* message, const int8_t level=0);
void lcd_setalertstatusPGM(const char* message);
void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...);
void lcd_setalertstatuspgm(const char* message);
void lcd_reset_alert_level();
void lcd_kill_screen();
void kill_screen(const char* lcd_msg);
@ -64,9 +64,6 @@
void bootscreen();
#endif
#define LCD_MESSAGEPGM(x) lcd_setstatusPGM(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
#define LCD_UPDATE_INTERVAL 100
#if ENABLED(ULTIPANEL)
@ -152,22 +149,26 @@
#endif
#else // no LCD
inline void lcd_update() {}
inline void lcd_init() {}
inline bool lcd_hasstatus() { return false; }
inline void lcd_setstatus(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); }
inline void lcd_setstatusPGM(const char* const message, const int8_t level=0) { UNUSED(message); UNUSED(level); }
inline void lcd_setalertstatusPGM(const char* message) { UNUSED(message); }
inline void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { UNUSED(level); UNUSED(fmt); }
inline void lcd_buttons_update() {}
inline void lcd_reset_alert_level() {}
inline bool lcd_detected() { return true; }
inline void lcd_refresh() {}
#define LCD_MESSAGEPGM(x) NOOP
#define LCD_ALERTMESSAGEPGM(x) NOOP
#endif // ULTRA_LCD
#define LCD_MESSAGEPGM(x) lcd_setstatusPGM(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatusPGM(PSTR(x))
void lcd_reset_status();
#if ENABLED(AUTO_BED_LEVELING_UBL)
void lcd_mesh_edit_setup(float initial);
float lcd_mesh_edit();