Merge pull request #8417 from thinkyhead/bf1_M114_DETAIL
[1.1] Add M114_DETAIL to Configuration_adv.h
This commit is contained in:
commit
be67acbd48
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 4
|
#define Z_HOME_BUMP_MM 4
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 3
|
#define Z_HOME_BUMP_MM 3
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 1
|
#define Z_HOME_BUMP_MM 1
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 3
|
#define X_HOME_BUMP_MM 3
|
||||||
#define Y_HOME_BUMP_MM 3
|
#define Y_HOME_BUMP_MM 3
|
||||||
#define Z_HOME_BUMP_MM 3
|
#define Z_HOME_BUMP_MM 3
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -334,7 +337,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -135,6 +135,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -358,7 +361,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 10
|
#define X_HOME_BUMP_MM 10
|
||||||
#define Y_HOME_BUMP_MM 10
|
#define Y_HOME_BUMP_MM 10
|
||||||
#define Z_HOME_BUMP_MM 3
|
#define Z_HOME_BUMP_MM 3
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
||||||
|
@ -127,6 +127,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -350,7 +353,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 2
|
#define X_HOME_BUMP_MM 2
|
||||||
#define Y_HOME_BUMP_MM 2
|
#define Y_HOME_BUMP_MM 2
|
||||||
#define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
|
#define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
@ -122,6 +122,9 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +348,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 1
|
#define Z_HOME_BUMP_MM 1
|
||||||
|
@ -122,6 +122,12 @@
|
|||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
|
// Show extra position information in M114
|
||||||
|
//#define M114_DETAIL
|
||||||
|
|
||||||
// Show Temperature ADC value
|
// Show Temperature ADC value
|
||||||
// Enable for M105 to include ADC values read from temperature sensors.
|
// Enable for M105 to include ADC values read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
@ -345,7 +351,7 @@
|
|||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
// Homing hits each endstop, retracts by these distances, then does a slower bump.
|
||||||
#define X_HOME_BUMP_MM 5
|
#define X_HOME_BUMP_MM 5
|
||||||
#define Y_HOME_BUMP_MM 5
|
#define Y_HOME_BUMP_MM 5
|
||||||
#define Z_HOME_BUMP_MM 2
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
Loading…
Reference in New Issue
Block a user