diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h
index 26b243717..b66c148bb 100644
--- a/Marlin/Conditionals_post.h
+++ b/Marlin/Conditionals_post.h
@@ -68,6 +68,18 @@
 #define Y_MIN_BED (Y_CENTER - (Y_BED_SIZE) / 2)
 #define Y_MAX_BED (Y_CENTER + (Y_BED_SIZE) / 2)
 
+/**
+ * Dual X Carriage
+ */
+#if ENABLED(DUAL_X_CARRIAGE)
+  #ifndef X1_MIN_POS
+    #define X1_MIN_POS X_MIN_POS
+  #endif
+  #ifndef X1_MAX_POS
+    #define X1_MAX_POS X_BED_SIZE
+  #endif
+#endif
+
 /**
  * CoreXY, CoreXZ, and CoreYZ - and their reverse
  */
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index faee0a483..c70d227aa 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/MarlinConfig.h b/Marlin/MarlinConfig.h
index 5b049a387..e1988fe63 100644
--- a/Marlin/MarlinConfig.h
+++ b/Marlin/MarlinConfig.h
@@ -25,10 +25,10 @@
 
 #include "boards.h"
 #include "macros.h"
-#include "drivers.h"
 #include "Version.h"
 #include "Configuration.h"
 #include "Conditionals_LCD.h"
+#include "drivers.h"
 #include "Configuration_adv.h"
 
 #if USE_MARLINSERIAL
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index e0f1708b9..80672d18f 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1329,7 +1329,7 @@ bool get_target_extruder_from_command(const uint16_t code) {
       if (axis == X_AXIS) {
 
         // In Dual X mode hotend_offset[X] is T1's home position
-        float dual_max_x = MAX(hotend_offset[X_AXIS][1], X2_MAX_POS);
+        const float dual_max_x = MAX(hotend_offset[X_AXIS][1], X2_MAX_POS);
 
         if (active_extruder != 0) {
           // T1 can move from X2_MIN_POS to X2_MAX_POS or X2 home position (whichever is larger)
@@ -12017,9 +12017,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
           #endif
         }
 
-        // Save current position to destination, for use later
-        set_destination_from_current();
-
         #if HAS_LEVELING
           // Set current position to the physical position
           const bool leveling_was_active = planner.leveling_active;
@@ -12028,10 +12025,23 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
 
         #if ENABLED(DUAL_X_CARRIAGE)
 
+          #if HAS_SOFTWARE_ENDSTOPS
+            // Update the X software endstops early
+            active_extruder = tmp_extruder;
+            update_software_endstops(X_AXIS);
+            active_extruder = !tmp_extruder;
+          #endif
+
+          // Don't move the new extruder out of bounds
+          if (!WITHIN(current_position[X_AXIS], soft_endstop_min[X_AXIS], soft_endstop_max[X_AXIS]))
+            no_move = true;
+
+          if (!no_move) set_destination_from_current();
           dualx_tool_change(tmp_extruder, no_move); // Can modify no_move
 
         #else // !DUAL_X_CARRIAGE
 
+          set_destination_from_current();
           #if ENABLED(PARKING_EXTRUDER) // Dual Parking extruder
             parking_extruder_tool_change(tmp_extruder, no_move);
           #endif
@@ -12117,6 +12127,10 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
 
       feedrate_mm_s = old_feedrate_mm_s;
 
+      #if HAS_SOFTWARE_ENDSTOPS && ENABLED(DUAL_X_CARRIAGE)
+        update_software_endstops(X_AXIS);
+      #endif
+
     #else // HOTENDS <= 1
 
       UNUSED(fr_mm_s);
diff --git a/Marlin/drivers.h b/Marlin/drivers.h
index 0aa424c67..0d92f55dc 100644
--- a/Marlin/drivers.h
+++ b/Marlin/drivers.h
@@ -45,47 +45,14 @@
 #define AXIS_DRIVER_TYPE_X(T) AXIS_DRIVER_TYPE(X,T)
 #define AXIS_DRIVER_TYPE_Y(T) AXIS_DRIVER_TYPE(Y,T)
 #define AXIS_DRIVER_TYPE_Z(T) AXIS_DRIVER_TYPE(Z,T)
-
-#if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)
-  #define AXIS_DRIVER_TYPE_X2(T) AXIS_DRIVER_TYPE(X2,T)
-#else
-  #define AXIS_DRIVER_TYPE_X2(T) false
-#endif
-#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
-  #define AXIS_DRIVER_TYPE_Y2(T) AXIS_DRIVER_TYPE(Y2,T)
-#else
-  #define AXIS_DRIVER_TYPE_Y2(T) false
-#endif
-#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
-  #define AXIS_DRIVER_TYPE_Z2(T) AXIS_DRIVER_TYPE(Z2,T)
-#else
-  #define AXIS_DRIVER_TYPE_Z2(T) false
-#endif
-#if E_STEPPERS > 0
-  #define AXIS_DRIVER_TYPE_E0(T) AXIS_DRIVER_TYPE(E0,T)
-#else
-  #define AXIS_DRIVER_TYPE_E0(T) false
-#endif
-#if E_STEPPERS > 1
-  #define AXIS_DRIVER_TYPE_E1(T) AXIS_DRIVER_TYPE(E1,T)
-#else
-  #define AXIS_DRIVER_TYPE_E1(T) false
-#endif
-#if E_STEPPERS > 2
-  #define AXIS_DRIVER_TYPE_E2(T) AXIS_DRIVER_TYPE(E2,T)
-#else
-  #define AXIS_DRIVER_TYPE_E2(T) false
-#endif
-#if E_STEPPERS > 3
-  #define AXIS_DRIVER_TYPE_E3(T) AXIS_DRIVER_TYPE(E3,T)
-#else
-  #define AXIS_DRIVER_TYPE_E3(T) false
-#endif
-#if E_STEPPERS > 4
-  #define AXIS_DRIVER_TYPE_E4(T) AXIS_DRIVER_TYPE(E4,T)
-#else
-  #define AXIS_DRIVER_TYPE_E4(T) false
-#endif
+#define AXIS_DRIVER_TYPE_X2(T) (ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && AXIS_DRIVER_TYPE(X2,T)
+#define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && AXIS_DRIVER_TYPE(Y2,T))
+#define AXIS_DRIVER_TYPE_Z2(T) (ENABLED(Z_DUAL_STEPPER_DRIVERS) && AXIS_DRIVER_TYPE(Z2,T))
+#define AXIS_DRIVER_TYPE_E0(T) (E_STEPPERS > 0 && AXIS_DRIVER_TYPE(E0,T))
+#define AXIS_DRIVER_TYPE_E1(T) (E_STEPPERS > 1 && AXIS_DRIVER_TYPE(E1,T))
+#define AXIS_DRIVER_TYPE_E2(T) (E_STEPPERS > 2 && AXIS_DRIVER_TYPE(E2,T))
+#define AXIS_DRIVER_TYPE_E3(T) (E_STEPPERS > 3 && AXIS_DRIVER_TYPE(E3,T))
+#define AXIS_DRIVER_TYPE_E4(T) (E_STEPPERS > 4 && AXIS_DRIVER_TYPE(E4,T))
 
 #define HAS_DRIVER(T)  (AXIS_DRIVER_TYPE_X(T)  || AXIS_DRIVER_TYPE_X2(T) || \
                         AXIS_DRIVER_TYPE_Y(T)  || AXIS_DRIVER_TYPE_Y2(T) || \
diff --git a/Marlin/endstops.cpp b/Marlin/endstops.cpp
index f345e8f45..29417057c 100644
--- a/Marlin/endstops.cpp
+++ b/Marlin/endstops.cpp
@@ -229,11 +229,13 @@ void Endstops::not_homing() {
   #endif
 }
 
-// If the last move failed to trigger an endstop, call kill
-void Endstops::validate_homing_move() {
-  if (trigger_state()) hit_on_purpose();
-  else kill(PSTR(MSG_ERR_HOMING_FAILED));
-}
+#if ENABLED(VALIDATE_HOMING_ENDSTOPS)
+  // If the last move failed to trigger an endstop, call kill
+  void Endstops::validate_homing_move() {
+    if (trigger_state()) hit_on_purpose();
+    else kill(PSTR(MSG_ERR_HOMING_FAILED));
+  }
+#endif
 
 // Enable / disable endstop z-probe checking
 #if HAS_BED_PROBE
diff --git a/Marlin/endstops.h b/Marlin/endstops.h
index 97dd62443..2114e23e3 100644
--- a/Marlin/endstops.h
+++ b/Marlin/endstops.h
@@ -29,6 +29,8 @@
 
 #include "MarlinConfig.h"
 
+#define VALIDATE_HOMING_ENDSTOPS
+
 enum EndstopEnum : char {
   X_MIN,
   Y_MIN,
@@ -143,8 +145,12 @@ class Endstops {
     // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
     static void not_homing();
 
-    // If the last move failed to trigger an endstop, call kill
-    static void validate_homing_move();
+    #if ENABLED(VALIDATE_HOMING_ENDSTOPS)
+      // If the last move failed to trigger an endstop, call kill
+      static void validate_homing_move();
+    #else
+      FORCE_INLINE static void validate_homing_move() { hit_on_purpose(); }
+    #endif
 
     // Clear endstops (i.e., they were hit intentionally) to suppress the report
     FORCE_INLINE static void hit_on_purpose() { hit_state = 0; }
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 855cddf12..441218331 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 01898336c..b6a17ee70 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 68b678b4d..509affa7e 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
index d73082017..b54fce02d 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
index 56d738ab1..15b99f196 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index bac8bd411..389c86ebc 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index b86ac82e8..a13866237 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index bac8bd411..389c86ebc 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index f5bb3ac69..bd66b46ef 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 28ec3a647..b2ed0164a 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 81624d759..3da707157 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
index 012d962e1..4a7c8593f 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
index 907d2c64a..8ba6e1132 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
index 87d6f5077..f46616ec1 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
index e510fb5a1..d8f3bf2f3 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
index 907d2c64a..8ba6e1132 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index d9df62df8..a3980b449 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 288414377..9cb8a419d 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index d3988eed0..471c423a2 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index d3988eed0..471c423a2 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 8380309a1..d8219ed29 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index 51708c822..0a1fe1fd4 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 2eb9cce38..de158745b 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index e5d18201e..a9bd630f0 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index db7a0e604..177fd85cc 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 342182a8c..1b7b16edd 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 12f0769fe..0724fdb40 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index dbe361bbe..9716dc5d1 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h
index 1405715e7..01d17fdd9 100644
--- a/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index c4b067f10..eebd76732 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -343,6 +343,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index a18a64400..7b68e7916 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index 1ddec9f73..2580cb1fc 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index cab535cbe..74f665c16 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index e55a98446..b5b179204 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 017d8bea6..dea37279f 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 017d8bea6..dea37279f 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 017d8bea6..dea37279f 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 9c38fb0c4..1dc3fd137 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -345,6 +345,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 29e706171..c49d3cefc 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 207f1dbdb..2ca1d7b6c 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 64f47ec4a..a637f0306 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 302c54256..3b3131f25 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index ccf1c96b1..5c03889f2 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -340,6 +340,8 @@
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
+  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
   #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
   #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
diff --git a/Marlin/power.cpp b/Marlin/power.cpp
index df0579153..8c9bfcc7e 100644
--- a/Marlin/power.cpp
+++ b/Marlin/power.cpp
@@ -69,7 +69,9 @@ bool Power::is_power_needed() {
   ) return true;
 
   HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0) return true;
-  if (thermalManager.degTargetBed() > 0) return true;
+  #if HAS_HEATED_BED
+    if (thermalManager.degTargetBed() > 0) return true;
+  #endif
 
   return false;
 }
diff --git a/Marlin/status_screen_lite_ST7920.h b/Marlin/status_screen_lite_ST7920.h
index 17cb44a66..e3a9822f2 100644
--- a/Marlin/status_screen_lite_ST7920.h
+++ b/Marlin/status_screen_lite_ST7920.h
@@ -877,11 +877,11 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
 
 void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
   #if DISABLED(LCD_SET_PROGRESS_MANUALLY)
-    uint8_t progress_bar_percent;
+    uint8_t progress_bar_percent = 0;
   #endif
 
   // Set current percentage from SD when actively printing
-  #if ENABLED(SDSUPPORT)
+  #if ENABLED(LCD_SET_PROGRESS_MANUALLY) && ENABLED(SDSUPPORT) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD))
     if (IS_SD_PRINTING) progress_bar_percent = card.percentDone();
   #endif
 
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 8c965c45d..825c02d07 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -2171,7 +2171,7 @@ void Stepper::report_positions() {
       const uint8_t old_dir = _READ_DIR(AXIS);          \
       _ENABLE(AXIS);                                    \
       _APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INVERT);   \
-      DELAY_NS(400); /* DRV8825 */                      \
+      DELAY_NS(MINIMUM_STEPPER_DIR_DELAY);              \
       _SAVE_START;                                      \
       _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), true); \
       _PULSE_WAIT;                                      \
@@ -2243,7 +2243,9 @@ void Stepper::report_positions() {
           Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction);
           Z_DIR_WRITE(INVERT_Z_DIR ^ z_direction);
 
-          DELAY_NS(400); // DRV8825
+          #if MINIMUM_STEPPER_DIR_DELAY > 0
+            DELAY_NS(MINIMUM_STEPPER_DIR_DELAY);
+          #endif
 
           _SAVE_START;