MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

bq Hephestos2: Allow bed leveling (#10234)

Browse Source 
* Increases the offset, needed to allow the nozzle to touch the bed
* By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance.
This commit is contained in:
Thomas Karl Pietrowski 2018-03-28 04:06:14 +02:00 committed by Scott Lahteine
parent 941e9bd329
commit bfdd14be4f
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
View File

@ -700,7 +700,7 @@
*/
#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -4 // Z offset: -below +above [the nozzle]
// Certain types of probes need to stay away from edges
#define MIN_PROBE_EDGE 10
@ -738,8 +738,8 @@
//#define Z_AFTER_PROBING 2 // Z position after probing is done
// For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -2
#define Z_PROBE_OFFSET_RANGE_MAX 0
#define Z_PROBE_OFFSET_RANGE_MIN -5.5
#define Z_PROBE_OFFSET_RANGE_MAX -3
// Enable the M48 repeatability test to test probe accuracy
#define Z_MIN_PROBE_REPEATABILITY_TEST