From 6cdcd6c6d164882af0cba47b2da5d6a60d80bf25 Mon Sep 17 00:00:00 2001
From: AnHardt <github@kitelab.de>
Date: Mon, 16 Feb 2015 13:53:58 +0100
Subject: [PATCH 01/17] Fix iss#1492

Introduced lcd_strlen() and lcd_strlen_P().
Replaced the old functions where necessary.
Reworked language_ru.h.

Speeded up test for zero length string in cardreader.cpp
---
 Marlin/LiquidCrystalRus.cpp                   | 12 +++++---
 Marlin/cardreader.cpp                         |  2 +-
 Marlin/dogm_lcd_implementation.h              | 10 +++----
 Marlin/language_ru.h                          | 30 +++++++++----------
 Marlin/ultralcd.cpp                           | 22 +++++++++++++-
 Marlin/ultralcd.h                             |  3 +-
 .../ultralcd_implementation_hitachi_HD44780.h | 18 +++++------
 7 files changed, 61 insertions(+), 36 deletions(-)

diff --git a/Marlin/LiquidCrystalRus.cpp b/Marlin/LiquidCrystalRus.cpp
index 6ee2c112e..c74146236 100644
--- a/Marlin/LiquidCrystalRus.cpp
+++ b/Marlin/LiquidCrystalRus.cpp
@@ -14,10 +14,14 @@
 // it is a Russian alphabet translation
 // except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
 const PROGMEM uint8_t utf_recode[] = 
-       { 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
-         0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
-         0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,
-         0xbe,0x70,0x63,0xbf,0x79,0xe4,0x78,0xe5,0xc0,0xc1,0xe6,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7
+       { 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,
+         0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,0xa8,
+         0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,
+         0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
+         0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,
+         0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,0xbe,
+         0x70,0x63,0xbf,0x79,0xe4,0x78,0xe5,0xc0,
+         0xc1,0xe6,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7
         };     
 
 // When the display powers up, it is configured as follows:
diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp
index 498a654c5..a2dd67831 100644
--- a/Marlin/cardreader.cpp
+++ b/Marlin/cardreader.cpp
@@ -65,7 +65,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
       createFilename(lfilename,p);
       
       path[0]=0;
-      if(strlen(prepend)==0) //avoid leading / if already in prepend
+      if(prepend[0]==0) //avoid leading / if already in prepend
       {
        strcat(path,"/");
       }
diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h
index f512d3295..c7df306b3 100644
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@@ -315,7 +315,7 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
 
 static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
   char c;
-  uint8_t n = LCD_WIDTH - 2 - (pgm ? strlen_P(data) : (strlen(data)));
+  uint8_t n = LCD_WIDTH - 2 - (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
 
   lcd_implementation_mark_as_selected(row, pre_char);
 
@@ -377,18 +377,18 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
   uint8_t char_width = DOG_CHAR_WIDTH;
 
   #ifdef USE_BIG_EDIT_FONT
-    if (strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
+    if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
       u8g.setFont(FONT_MENU_EDIT);
       lcd_width = LCD_WIDTH_EDIT + 1;
       char_width = DOG_CHAR_WIDTH_EDIT;
-      if (strlen_P(pstr) >= LCD_WIDTH_EDIT - strlen(value)) rows = 2;
+      if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - lcd_strlen(value)) rows = 2;
     }
     else {
       u8g.setFont(FONT_MENU);
     }
   #endif
 
-  if (strlen_P(pstr) > LCD_WIDTH - 2 - strlen(value)) rows = 2;
+  if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - lcd_strlen(value)) rows = 2;
 
   const float kHalfChar = DOG_CHAR_HEIGHT_EDIT / 2;
   float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
@@ -396,7 +396,7 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
   u8g.setPrintPos(0, rowHeight + kHalfChar);
   lcd_printPGM(pstr);
   u8g.print(':');
-  u8g.setPrintPos((lcd_width-1-strlen(value)) * char_width, rows * rowHeight + kHalfChar);
+  u8g.setPrintPos((lcd_width-1-lcd_strlen(value)) * char_width, rows * rowHeight + kHalfChar);
   u8g.print(value);
 }
 
diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h
index 03ea77851..bcab50b79 100644
--- a/Marlin/language_ru.h
+++ b/Marlin/language_ru.h
@@ -13,7 +13,7 @@
 #define WELCOME_MSG                         MACHINE_NAME " Готов."
 #define MSG_SD_INSERTED                     "Карта вставлена"
 #define MSG_SD_REMOVED                      "Карта извлечена"
-#define MSG_MAIN                            "Меню \003"
+#define MSG_MAIN                            "Меню"
 #define MSG_AUTOSTART                       "Автостарт"
 #define MSG_DISABLE_STEPPERS                "Выкл. двигатели"
 #define MSG_AUTO_HOME                       "Парковка"
@@ -43,14 +43,14 @@
 #define MSG_MOVE_1MM                        "Move 1mm"
 #define MSG_MOVE_10MM                       "Move 10mm"
 #define MSG_SPEED                           "Скорость"
-#define MSG_NOZZLE                          "\002 Фильера"
-#define MSG_BED                             "\002 Кровать"
+#define MSG_NOZZLE                          LCD_STR_THERMOMETER " Фильера"
+#define MSG_BED                             LCD_STR_THERMOMETER " Кровать"
 #define MSG_FAN_SPEED                       "Куллер"
 #define MSG_FLOW                            "Поток"
-#define MSG_CONTROL                         "Настройки \003"
-#define MSG_MIN                             "\002 Минимум"
-#define MSG_MAX                             "\002 Максимум"
-#define MSG_FACTOR                          "\002 Фактор"
+#define MSG_CONTROL                         "Настройки"
+#define MSG_MIN                             LCD_STR_THERMOMETER " Минимум"
+#define MSG_MAX                             LCD_STR_THERMOMETER " Максимум"
+#define MSG_FACTOR                          LCD_STR_THERMOMETER " Фактор"
 #define MSG_AUTOTEMP                        "Autotemp"
 #define MSG_ON                              "Вкл. "
 #define MSG_OFF                             "Выкл. "
@@ -75,10 +75,10 @@
 #define MSG_YSTEPS                          "Y шаг/mm"
 #define MSG_ZSTEPS                          "Z шаг/mm"
 #define MSG_ESTEPS                          "E шаг/mm"
-#define MSG_TEMPERATURE                     "Температура     \x7E"
-#define MSG_MOTION                          "Скорости        \x7E"
+#define MSG_TEMPERATURE                     "Температура"
+#define MSG_MOTION                          "Скорости"
 #define MSG_VOLUMETRIC                      "Filament"
-#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_VOLUMETRIC_ENABLED		          "E in mm3"
 #define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
 #define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
 #define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
@@ -86,14 +86,14 @@
 #define MSG_STORE_EPROM                     "Сохранить в EPROM"
 #define MSG_LOAD_EPROM                      "Загруз. из EPROM"
 #define MSG_RESTORE_FAILSAFE                "Сброс настроек"
-#define MSG_REFRESH                         "\004Обновить"
-#define MSG_WATCH                           "Обзор           \003"
-#define MSG_PREPARE                         "Действия        \x7E"
-#define MSG_TUNE                            "Настройки       \x7E"
+#define MSG_REFRESH                         LCD_STR_REFRESH "Обновить"
+#define MSG_WATCH                           "Обзор"
+#define MSG_PREPARE                         "Действия"
+#define MSG_TUNE                            "Настройки"
 #define MSG_PAUSE_PRINT                     "Продолжить печать"
 #define MSG_RESUME_PRINT                    "возобн. печать"
 #define MSG_STOP_PRINT                      "Остановить печать"
-#define MSG_CARD_MENU                       "Меню карты      \x7E"
+#define MSG_CARD_MENU                       "Меню карты"
 #define MSG_NO_CARD                         "Нет карты"
 #define MSG_DWELL                           "Сон..."
 #define MSG_USERWAIT                        "Ожиданиие"
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 3773ad324..c9cd33883 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -1260,6 +1260,26 @@ void lcd_init()
 #endif
 }
 
+int lcd_strlen(char *s) {
+     int i = 0, j = 0;
+   while (s[i]) {
+     if ((s[i] & 0xc0) != 0x80) j++;
+     i++;
+   }
+   return j;
+}
+
+int lcd_strlen_P(const char *s) {
+     int j = 0;
+   while (pgm_read_byte(s)) {
+     if ((pgm_read_byte(s) & 0xc0) != 0x80) j++;
+     s++;
+   }
+   return j;
+}
+
+
+
 void lcd_update()
 {
     static unsigned long timeoutToStatus = 0;
@@ -1372,7 +1392,7 @@ void lcd_ignore_click(bool b)
 }
 
 void lcd_finishstatus() {
-  int len = strlen(lcd_status_message);
+  int len = lcd_strlen(lcd_status_message);
   if (len > 0) {
     while (len < LCD_WIDTH) {
       lcd_status_message[len++] = ' ';
diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h
index 30175be39..d861e9d73 100644
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@@ -4,7 +4,8 @@
 #include "Marlin.h"
 
 #ifdef ULTRA_LCD
-
+  int lcd_strlen(char *s);
+  int lcd_strlen_P(const char *s);
   void lcd_update();
   void lcd_init();
   void lcd_setstatus(const char* message);
diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h
index 9eeee1e15..1628bf8f4 100644
--- a/Marlin/ultralcd_implementation_hitachi_HD44780.h
+++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h
@@ -636,7 +636,7 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
     {
         lcd.print(c);
         pstr++;
-        n--;
+        if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
     }
     while(n--)
         lcd.print(' ');
@@ -648,9 +648,9 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
     char c;
     //Use all characters in narrow LCDs
   #if LCD_WIDTH < 20
-      uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
+      uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen(data);
     #else
-      uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
+      uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen(data);
   #endif
     lcd.setCursor(0, row);
     lcd.print(pre_char);
@@ -658,7 +658,7 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
     {
         lcd.print(c);
         pstr++;
-        n--;
+        if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
     }
     lcd.print(':');
     while(n--)
@@ -670,9 +670,9 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
     char c;
     //Use all characters in narrow LCDs
   #if LCD_WIDTH < 20
-      uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
+      uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen_P(data);
     #else
-      uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
+      uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen_P(data);
   #endif
     lcd.setCursor(0, row);
     lcd.print(pre_char);
@@ -680,7 +680,7 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
     {
         lcd.print(c);
         pstr++;
-        n--;
+        if ((pgm_read_byte(pstr) & 0xc0) != 0x80) n--;
     }
     lcd.print(':');
     while(n--)
@@ -733,9 +733,9 @@ void lcd_implementation_drawedit(const char* pstr, char* value)
     lcd_printPGM(pstr);
     lcd.print(':');
    #if LCD_WIDTH < 20
-      lcd.setCursor(LCD_WIDTH - strlen(value), 1);
+      lcd.setCursor(LCD_WIDTH - lcd_strlen(value), 1);
     #else
-      lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
+      lcd.setCursor(LCD_WIDTH -1 - lcd_strlen(value), 1);
    #endif
     lcd.print(value);
 }

From 15b73386b52721b38e53c32cd6601b700b817f1c Mon Sep 17 00:00:00 2001
From: domonoky <domonoky@2printbeta.de>
Date: Thu, 19 Feb 2015 11:53:31 +0100
Subject: [PATCH 02/17] Add pin definitions for the Boards BAM&DICE + BAM&DICE
 Due

---
 Marlin/boards.h            |   4 +-
 Marlin/pins.h              |   2 +
 Marlin/pins_BAM_DICE_DUE.h | 183 +++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+), 1 deletion(-)
 create mode 100644 Marlin/pins_BAM_DICE_DUE.h

diff --git a/Marlin/boards.h b/Marlin/boards.h
index c6997fe87..c63651950 100644
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@@ -50,10 +50,12 @@
 #define BOARD_LEAPFROG          999  // Leapfrog
 #define BOARD_WITBOX            41   // bq WITBOX
 #define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
+#define BOARD_BAM_DICE          401   // 2PrintBeta BAM&DICE with STK drivers
+#define BOARD_BAM_DICE_DUE      402   // 2PrintBeta BAM&DICE Due with STK drivers and Arduino Mega
 
 #define BOARD_99                99   // This is in pins.h but...?
 
 #define MB(board) (MOTHERBOARD==BOARD_##board)
-#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF))
+#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(BAM_DICE) )
 
 #endif //__BOARDS_H
diff --git a/Marlin/pins.h b/Marlin/pins.h
index ea8f96c48..ecee6c0ac 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -110,6 +110,8 @@
   #include "pins_WITBOX.h"
 #elif MB(HEPHESTOS)
   #include "pins_HEPHESTOS.h"
+#elif MB(BAM_DICE_DUE)
+  #include "pins_BAM_DICE_DUE.h"
 #elif MB(99)
   #include "pins_99.h"
 #else
diff --git a/Marlin/pins_BAM_DICE_DUE.h b/Marlin/pins_BAM_DICE_DUE.h
new file mode 100644
index 000000000..f9ca27ef7
--- /dev/null
+++ b/Marlin/pins_BAM_DICE_DUE.h
@@ -0,0 +1,183 @@
+/**
+ * Arduino Mega with BAM&DICE DUE pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  BAM&DICE Due with Arduino Mega
+ */
+
+#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define LARGE_FLASH true
+
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#define X_MIN_PIN           3
+#define X_MAX_PIN           2
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          15
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          19
+
+#define Y2_STEP_PIN        36
+#define Y2_DIR_PIN         34
+#define Y2_ENABLE_PIN      30
+
+#define Z2_STEP_PIN        36
+#define Z2_DIR_PIN         34
+#define Z2_ENABLE_PIN      30
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+
+#define E1_STEP_PIN        36
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+
+#define SDPOWER            -1
+#define SDSS               53
+#define LED_PIN            13
+
+#define FAN_PIN            9 // (Sprinter config)
+ 
+#define PS_ON_PIN          12
+
+#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
+  #define KILL_PIN           41
+#else
+  #define KILL_PIN           -1
+#endif
+
+#define HEATER_0_PIN       10
+
+#define HEATER_1_PIN       -1
+
+#define HEATER_2_PIN       -1
+
+#define TEMP_0_PIN         9   // ANALOG NUMBERING
+#define TEMP_1_PIN         11   // ANALOG NUMBERING
+#define TEMP_2_PIN         -1   // ANALOG NUMBERING
+
+#define HEATER_BED_PIN     8    // BED
+
+#define TEMP_BED_PIN       14   // ANALOG NUMBERING
+
+#ifdef NUM_SERVOS
+  #define SERVO0_PIN         11
+
+  #if NUM_SERVOS > 1
+    #define SERVO1_PIN         6
+  #endif
+
+  #if NUM_SERVOS > 2
+    #define SERVO2_PIN         5
+  #endif
+
+  #if NUM_SERVOS > 3
+    #define SERVO3_PIN         4
+  #endif
+#endif
+
+
+#ifdef ULTRA_LCD
+
+  #ifdef NEWPANEL
+    #define LCD_PINS_RS 16
+    #define LCD_PINS_ENABLE 17
+    #define LCD_PINS_D4 23
+    #define LCD_PINS_D5 25
+    #define LCD_PINS_D6 27
+    #define LCD_PINS_D7 29
+
+    #ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
+      #define BEEPER 37
+
+      #define BTN_EN1 31
+      #define BTN_EN2 33
+      #define BTN_ENC 35
+
+      #define SDCARDDETECT 49
+    #elif defined(LCD_I2C_PANELOLU2)
+      #define BTN_EN1 47  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2 43
+      #define BTN_ENC 32
+      #define LCD_SDSS 53
+      #define SDCARDDETECT -1
+      #define KILL_PIN 41
+    #elif defined(LCD_I2C_VIKI)
+      #define BTN_EN1 22  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2 7
+      #define BTN_ENC -1
+      #define LCD_SDSS 53
+      #define SDCARDDETECT 49
+    #else
+      // arduino pin which triggers an piezzo beeper
+      #define BEEPER 33  // Beeper on AUX-4
+
+      // buttons are directly attached using AUX-2
+      #ifdef REPRAPWORLD_KEYPAD
+        #define BTN_EN1 64 // encoder
+        #define BTN_EN2 59 // encoder
+        #define BTN_ENC 63 // enter button
+        #define SHIFT_OUT 40 // shift register
+        #define SHIFT_CLK 44 // shift register
+        #define SHIFT_LD 42 // shift register
+      #else
+        #define BTN_EN1 37
+        #define BTN_EN2 35
+        #define BTN_ENC 31  // the click
+      #endif
+
+      #ifdef G3D_PANEL
+        #define SDCARDDETECT 49
+      #else
+        #define SDCARDDETECT -1  // Ramps does not use this port
+      #endif
+
+    #endif
+
+  #else // Old-style panel with shift register
+    // Arduino pin witch triggers an piezzo beeper
+    #define BEEPER 33   // No Beeper added
+
+    // Buttons are attached to a shift register
+    // Not wired yet
+    // #define SHIFT_CLK 38
+    // #define SHIFT_LD 42
+    // #define SHIFT_OUT 40
+    // #define SHIFT_EN 17
+
+    #define LCD_PINS_RS 16
+    #define LCD_PINS_ENABLE 17
+    #define LCD_PINS_D4 23
+    #define LCD_PINS_D5 25
+    #define LCD_PINS_D6 27
+    #define LCD_PINS_D7 29
+  #endif
+#endif // ULTRA_LCD
+
+// SPI for Max6675 Thermocouple
+#ifndef SDSUPPORT
+  #define MAX6675_SS       66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS       66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+#ifndef SDSUPPORT
+  // these pins are defined in the SD library if building with SD support
+  #define SCK_PIN          52
+  #define MISO_PIN         50
+  #define MOSI_PIN         51
+#endif

From 7891eacf214959cfdd67815f71ef3cadecf84c94 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Thu, 19 Feb 2015 17:26:22 -0800
Subject: [PATCH 03/17] Merge branch 'Development' into fixup_ramps_boards

- Also apply cleanup for #1514
---
 Marlin/boards.h             |  3 ++-
 Marlin/pins.h               |  6 +++++-
 Marlin/pins_AZTEEG_X3.h     |  5 -----
 Marlin/pins_AZTEEG_X3_PRO.h | 14 +++++++++-----
 Marlin/pins_BAM_DICE_DUE.h  | 11 +++++++++++
 Marlin/pins_HEPHESTOS.h     |  3 +++
 Marlin/pins_RAMPS_13.h      | 38 +++++++++++--------------------------
 Marlin/pins_WITBOX.h        |  3 +++
 8 files changed, 44 insertions(+), 39 deletions(-)
 delete mode 100644 Marlin/pins_AZTEEG_X3.h
 create mode 100644 Marlin/pins_BAM_DICE_DUE.h

diff --git a/Marlin/boards.h b/Marlin/boards.h
index c6997fe87..2f1107b45 100644
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@@ -50,10 +50,11 @@
 #define BOARD_LEAPFROG          999  // Leapfrog
 #define BOARD_WITBOX            41   // bq WITBOX
 #define BOARD_HEPHESTOS         42   // bq Prusa i3 Hephestos
+#define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
+#define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
 
 #define BOARD_99                99   // This is in pins.h but...?
 
 #define MB(board) (MOTHERBOARD==BOARD_##board)
-#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF))
 
 #endif //__BOARDS_H
diff --git a/Marlin/pins.h b/Marlin/pins.h
index ea8f96c48..c33fa24e0 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -36,7 +36,7 @@
   #include "pins_SETHI.h"
 #elif MB(RAMPS_OLD)
   #include "pins_RAMPS_OLD.h"
-#elif IS_RAMPS
+#elif MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF)
   #include "pins_RAMPS_13.h"
 #elif MB(DUEMILANOVE_328P)
   #include "pins_DUEMILANOVE_328P.h"
@@ -110,6 +110,10 @@
   #include "pins_WITBOX.h"
 #elif MB(HEPHESTOS)
   #include "pins_HEPHESTOS.h"
+#elif MB(BAM_DICE)
+  #include "pins_RAMPS_13.h"
+#elif MB(BAM_DICE_DUE)
+  #include "pins_BAM_DICE_DUE.h"
 #elif MB(99)
   #include "pins_99.h"
 #else
diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h
deleted file mode 100644
index 7eb8eae49..000000000
--- a/Marlin/pins_AZTEEG_X3.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/**
- * AZTEEG_X3 Arduino Mega with RAMPS v1.3 pin assignments
- */
-
-#include "pins_RAMPS_13.h"
diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h
index ddb055ad9..5d0d70db6 100644
--- a/Marlin/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/pins_AZTEEG_X3_PRO.h
@@ -4,6 +4,9 @@
 
 #include "pins_RAMPS_13.h"
 
+#define FAN_PIN             9 // (Sprinter config)
+#define BEEPER             33
+
 #define E2_STEP_PIN        23
 #define E2_DIR_PIN         25
 #define E2_ENABLE_PIN      40
@@ -16,15 +19,16 @@
 #define E4_DIR_PIN         37
 #define E4_ENABLE_PIN      42
 
+#define HEATER_1_PIN       -1
 #define HEATER_2_PIN       16
 #define HEATER_3_PIN       17
-#define HEATER_4_PIN       4
-#define HEATER_5_PIN       5
-#define HEATER_6_PIN       6
+#define HEATER_4_PIN        4
+#define HEATER_5_PIN        5
+#define HEATER_6_PIN        6
 #define HEATER_7_PIN       11
 
 #define TEMP_2_PIN         12   // ANALOG NUMBERING
 #define TEMP_3_PIN         11   // ANALOG NUMBERING
 #define TEMP_4_PIN         10   // ANALOG NUMBERING
-#define TC1                4    // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
-#define TC2                5    // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
+#define TC1                 4   // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
+#define TC2                 5   // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
diff --git a/Marlin/pins_BAM_DICE_DUE.h b/Marlin/pins_BAM_DICE_DUE.h
new file mode 100644
index 000000000..c3123d043
--- /dev/null
+++ b/Marlin/pins_BAM_DICE_DUE.h
@@ -0,0 +1,11 @@
+/**
+ * BAM&DICE Due (Arduino Mega) pin assignments
+ */
+
+#include "pins_RAMPS_13.h"
+
+#define FAN_PIN             9 // (Sprinter config)
+#define HEATER_1_PIN       -1
+
+#define TEMP_0_PIN          9 // ANALOG NUMBERING
+#define TEMP_1_PIN         11 // ANALOG NUMBERING
diff --git a/Marlin/pins_HEPHESTOS.h b/Marlin/pins_HEPHESTOS.h
index c5b7bcf79..8fc5ba643 100644
--- a/Marlin/pins_HEPHESTOS.h
+++ b/Marlin/pins_HEPHESTOS.h
@@ -3,3 +3,6 @@
  */
 
 #include "pins_RAMPS_13.h"
+
+#define FAN_PIN             9 // (Sprinter config)
+#define HEATER_1_PIN       -1
diff --git a/Marlin/pins_RAMPS_13.h b/Marlin/pins_RAMPS_13.h
index e2f74fc83..840804a9d 100644
--- a/Marlin/pins_RAMPS_13.h
+++ b/Marlin/pins_RAMPS_13.h
@@ -7,10 +7,8 @@
  *  RAMPS_13_EEB (Extruder, Extruder, Bed)
  *  RAMPS_13_EFF (Extruder, Fan, Fan)
  *  RAMPS_13_EEF (Extruder, Extruder, Fan)
- *  3DRAG
- *  K8200
- *  AZTEEG_X3
- *  AZTEEG_X3_PRO
+ *
+ *  Other pins_MYBOARD.h files may override these defaults
  */
 
 #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
@@ -63,7 +61,7 @@
   #define FILWIDTH_PIN        5
 #endif
 
-#if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) || MB(WITBOX) || MB(HEPHESTOS)
+#if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF)
   #define FAN_PIN            9 // (Sprinter config)
   #if MB(RAMPS_13_EFF)
     #define CONTROLLERFAN_PIN  -1 // Pin used for the fan to cool controller
@@ -88,7 +86,7 @@
   #define HEATER_0_PIN       10   // EXTRUDER 1
 #endif
 
-#if MB(RAMPS_13_EFB) || MB(AZTEEG_X3) || MB(WITBOX) || MB(HEPHESTOS)
+#if MB(RAMPS_13_EFB)
   #define HEATER_1_PIN       -1
 #else
   #define HEATER_1_PIN       9    // EXTRUDER 2 (FAN On Sprinter)
@@ -110,28 +108,14 @@
 
 #ifdef NUM_SERVOS
   #define SERVO0_PIN         11
-
   #if NUM_SERVOS > 1
-    #define SERVO1_PIN         6
-  #endif
-
-  #if NUM_SERVOS > 2
-    #define SERVO2_PIN         5
-  #endif
-
-  #if NUM_SERVOS > 3
-    #define SERVO3_PIN         4
-  #endif
-#endif
-
-#if MB(AZTEEG_X3_PRO)
-  #define BEEPER 33
-#endif
-
-#ifdef TEMP_STAT_LEDS
-  #if MB(AZTEEG_X3)
-    #define STAT_LED_RED       6
-    #define STAT_LED_BLUE     11
+    #define SERVO1_PIN        6
+    #if NUM_SERVOS > 2
+      #define SERVO2_PIN      5
+      #if NUM_SERVOS > 3
+        #define SERVO3_PIN    4
+      #endif
+    #endif
   #endif
 #endif
 
diff --git a/Marlin/pins_WITBOX.h b/Marlin/pins_WITBOX.h
index 4deda2cba..a4eb0e313 100644
--- a/Marlin/pins_WITBOX.h
+++ b/Marlin/pins_WITBOX.h
@@ -3,3 +3,6 @@
  */
 
 #include "pins_RAMPS_13.h"
+
+#define FAN_PIN             9 // (Sprinter config)
+#define HEATER_1_PIN       -1

From 859c8d3fefb2e8f4e41d07c06d49d8981cfd84a5 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Thu, 19 Feb 2015 17:28:38 -0800
Subject: [PATCH 04/17] Azteeg X3 overrides too

---
 Marlin/pins_AZTEEG_X3.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Marlin/pins_AZTEEG_X3.h

diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h
new file mode 100644
index 000000000..d346e0bd2
--- /dev/null
+++ b/Marlin/pins_AZTEEG_X3.h
@@ -0,0 +1,13 @@
+/**
+ * AZTEEG_X3 Arduino Mega with RAMPS v1.3 pin assignments
+ */
+
+#include "pins_RAMPS_13.h"
+
+#define FAN_PIN            9 // (Sprinter config)
+#define HEATER_1_PIN       -1
+
+#ifdef TEMP_STAT_LEDS
+  #define STAT_LED_RED       6
+  #define STAT_LED_BLUE     11
+#endif

From 65e1fc71be81406e58c0fa2bea324c504192afb6 Mon Sep 17 00:00:00 2001
From: wgm4321 <wgm4321@live.com>
Date: Thu, 19 Feb 2015 21:42:57 -0500
Subject: [PATCH 05/17] Add encoder rate multiplier

---
 Marlin/Configuration_adv.h |   5 ++
 Marlin/ultralcd.cpp        | 131 +++++++++++++++++++++++++++++--------
 2 files changed, 107 insertions(+), 29 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 4d3579d24..890cca91d 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -284,6 +284,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER	 		// If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75	// If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+#define ENCODER_RATE_MULTIPLIER_DEBUG   // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 3773ad324..c9c357a84 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -10,6 +10,9 @@
 
 int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
 
+bool encoderRateMultiplierEnabled;
+int32_t lastEncoderMovementMillis;
+
 /* Configuration settings */
 int plaPreheatHotendTemp;
 int plaPreheatHPBTemp;
@@ -101,24 +104,25 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
 #define ENCODER_FEEDRATE_DEADZONE 10
 
 #if !defined(LCD_I2C_VIKI)
-  #ifndef ENCODER_STEPS_PER_MENU_ITEM
-    #define ENCODER_STEPS_PER_MENU_ITEM 5
-  #endif
-  #ifndef ENCODER_PULSES_PER_STEP
-    #define ENCODER_PULSES_PER_STEP 1
-  #endif
+#ifndef ENCODER_STEPS_PER_MENU_ITEM
+#define ENCODER_STEPS_PER_MENU_ITEM 5
+#endif
+#ifndef ENCODER_PULSES_PER_STEP
+#define ENCODER_PULSES_PER_STEP 1
+#endif
 #else
-  #ifndef ENCODER_STEPS_PER_MENU_ITEM
-    #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
-  #endif
-  #ifndef ENCODER_PULSES_PER_STEP
-    #define ENCODER_PULSES_PER_STEP 1
-  #endif
+#ifndef ENCODER_STEPS_PER_MENU_ITEM
+#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
+#endif
+#ifndef ENCODER_PULSES_PER_STEP
+#define ENCODER_PULSES_PER_STEP 1
+#endif
 #endif
 
 
 /* Helper macros for menus */
 #define START_MENU() do { \
+	encoderRateMultiplierEnabled = false; \
     if (encoderPosition > 0x8000) encoderPosition = 0; \
     if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\
     uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
@@ -143,9 +147,38 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
     }\
     _menuItemNr++;\
 } while(0)
+#ifdef ENCODER_RATE_MULTIPLIER
+#define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
+    if (_menuItemNr == _lineNr) { \
+        if (lcdDrawUpdate) { \
+            const char* _label_pstr = PSTR(label); \
+            if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
+                lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
+									            }else{\
+                lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
+									            }\
+						        }\
+        if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
+            lcd_quick_feedback(); \
+			encoderRateMultiplierEnabled = true; \
+			lastEncoderMovementMillis = 0; \
+            menu_action_ ## type ( args ); \
+            return;\
+				        }\
+		    }\
+    _menuItemNr++;\
+} while(0)
+#endif
 #define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0)
 #define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
 #define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#ifdef ENCODER_RATE_MULTIPLIER
+#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
+#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#else
+#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
+#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#endif
 #define END_MENU() \
     if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \
     if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \
@@ -205,6 +238,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
 /* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
 static void lcd_status_screen()
 {
+	encoderRateMultiplierEnabled = false;
   #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
     uint16_t mil = millis();
     #ifndef PROGRESS_MSG_ONCE
@@ -423,23 +457,23 @@ static void lcd_tune_menu()
     MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
     MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
 #if TEMP_SENSOR_0 != 0
-    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_1 != 0
-    MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_2 != 0
-    MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_3 != 0
-    MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
 #endif
 
 
 #if TEMP_SENSOR_BED != 0
-    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
+	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
 #endif
-    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
     MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
     MENU_ITEM_EDIT(int3, MSG_FLOW " 0", &extruder_multiply[0], 10, 999);
 #if TEMP_SENSOR_1 != 0
@@ -816,21 +850,21 @@ static void lcd_control_temperature_menu()
   START_MENU();
   MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
 #if TEMP_SENSOR_0 != 0
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_1 != 0 && EXTRUDERS > 1
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_2 != 0 && EXTRUDERS > 2
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_3 != 0 && EXTRUDERS > 3
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_BED != 0
-  MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
 #endif
-  MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
 #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
   MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
   MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
@@ -961,13 +995,13 @@ static void lcd_control_volumetric_menu()
 	MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
 
 	if (volumetric_enabled) {
-		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
 #if EXTRUDERS > 1
-		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers);
 #if EXTRUDERS > 2
-		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
 #if EXTRUDERS > 3
-		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
 #endif //EXTRUDERS > 3
 #endif //EXTRUDERS > 2
 #endif //EXTRUDERS > 1
@@ -1322,8 +1356,47 @@ void lcd_update()
 		#endif
         if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP)
         {
+			int32_t encoderMultiplier = 1;
+
+#ifdef ENCODER_RATE_MULTIPLIER
+			if (encoderRateMultiplierEnabled)
+			{
+				int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
+
+				if (lastEncoderMovementMillis != 0)
+				{
+					// Note that the rate is always calculated between to passes through the 
+					// loop and that the abs of the encoderDiff value is tracked.
+					float encoderStepRate =
+						(float)(encoderMovementSteps) / ((float)(millis() - lastEncoderMovementMillis)) * 1000.0;
+
+					if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)
+					{
+						encoderMultiplier = 100;
+					}
+					else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)
+					{
+						encoderMultiplier = 10;
+					}
+
+#ifdef ENCODER_RATE_MULTIPLIER_DEBUG
+					SERIAL_ECHO_START;
+					SERIAL_ECHO("Enc Step Rate: ");
+					SERIAL_ECHO(encoderStepRate);
+					SERIAL_ECHO("  Multiplier: ");
+					SERIAL_ECHO(encoderMultiplier);
+					SERIAL_ECHO("  ENCODER_10X_STEPS_PER_SEC: ");
+					SERIAL_ECHO(ENCODER_10X_STEPS_PER_SEC);
+					SERIAL_ECHO("  ENCODER_100X_STEPS_PER_SEC: ");
+					SERIAL_ECHOLN(ENCODER_100X_STEPS_PER_SEC);
+#endif
+				}
+
+				lastEncoderMovementMillis = millis();
+			}
+#endif
             lcdDrawUpdate = 1;
-            encoderPosition += encoderDiff / ENCODER_PULSES_PER_STEP;
+			encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
             encoderDiff = 0;
             timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
         }

From b8e79dce897c970afb9c7721f93943046b1410b9 Mon Sep 17 00:00:00 2001
From: wgm4321 <wgm4321@live.com>
Date: Thu, 19 Feb 2015 21:51:23 -0500
Subject: [PATCH 06/17] Fix compilation errors when encoder multiplier is
 disabled

---
 Marlin/Configuration_adv.h | 2 +-
 Marlin/ultralcd.cpp        | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 890cca91d..d3795074a 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -287,7 +287,7 @@
 #define ENCODER_RATE_MULTIPLIER	 		// If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
 #define ENCODER_10X_STEPS_PER_SEC 75	// If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
 #define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
-#define ENCODER_RATE_MULTIPLIER_DEBUG   // If defined, output the encoder steps per second value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG   // If defined, output the encoder steps per second value
 
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index c9c357a84..ec9a435d8 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -176,8 +176,8 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
 #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
 #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
 #else
-#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
+#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
 #endif
 #define END_MENU() \
     if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \

From 2d6fa9ce809f60ab8e1a8429f14d06dc3dbf60a8 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Thu, 19 Feb 2015 23:54:06 -0800
Subject: [PATCH 07/17] Proper implementation of PID menu items

- Make this work per #1344
---
 Marlin/ultralcd.cpp | 198 ++++++++++++++++++++++++--------------------
 1 file changed, 108 insertions(+), 90 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 3773ad324..dd758724d 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -41,11 +41,6 @@ char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG;
 #include "ultralcd_implementation_hitachi_HD44780.h"
 #endif
 
-/** forward declarations **/
-
-void copy_and_scalePID_i();
-void copy_and_scalePID_d();
-
 /* Different menus */
 static void lcd_status_screen();
 #ifdef ULTIPANEL
@@ -185,9 +180,8 @@ void* editValue;
 int32_t minEditValue, maxEditValue;
 menuFunc_t callbackFunc;
 
-// place-holders for Ki and Kd edits, and the extruder # being edited
+// place-holders for Ki and Kd edits
 float raw_Ki, raw_Kd;
-int pid_current_extruder;
 
 static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool feedback=true) {
   if (currentMenu != menu) {
@@ -811,76 +805,120 @@ static void lcd_control_menu()
     END_MENU();
 }
 
+#ifdef PIDTEMP
+  // Helpers for editing PID Ki & Kd values
+  // grab the PID value out of the temp variable; scale it; then update the PID driver
+  void copy_and_scalePID_i(int e) {
+    PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
+    updatePID();
+  }
+  void copy_and_scalePID_d(int e) {
+    PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
+    updatePID();
+  }
+  void copy_and_scalePID_i_E1() { copy_and_scalePID_i(0); }
+  void copy_and_scalePID_d_E1() { copy_and_scalePID_d(0); }
+  #if EXTRUDERS > 1
+    void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); }
+    void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); }
+    #if EXTRUDERS > 2
+      void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); }
+      void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); }
+      #if EXTRUDERS > 3
+        void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); }
+        void copy_and_scalePID_d_E5() { copy_and_scalePID_d(3); }
+      #endif
+    #endif
+  #endif
+#endif
+
 static void lcd_control_temperature_menu()
 {
   START_MENU();
   MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
-#if TEMP_SENSOR_0 != 0
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
-#endif
-#if TEMP_SENSOR_1 != 0 && EXTRUDERS > 1
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
-#endif
-#if TEMP_SENSOR_2 != 0 && EXTRUDERS > 2
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
-#endif
-#if TEMP_SENSOR_3 != 0 && EXTRUDERS > 3
-  MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
-#endif
-#if TEMP_SENSOR_BED != 0
-  MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
-#endif
-  MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
-#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
-  MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
-  MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
-  MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
-  MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
-#endif
-#ifdef PIDTEMP
-	// set up temp variables - undo the default scaling
-	pid_current_extruder = 0;
-	raw_Ki = unscalePID_i(PID_PARAM(Ki,0));
-	raw_Kd = unscalePID_d(PID_PARAM(Kd,0));
-	MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990);
-	// i is typically a small value so allows values below 1
-	MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
-	MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d);
-    #ifdef PID_ADD_EXTRUSION_RATE
-	  MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990);
-    #endif//PID_ADD_EXTRUSION_RATE
-#ifdef PID_PARAMS_PER_EXTRUDER
+  #if TEMP_SENSOR_0 != 0
+    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+  #endif
   #if EXTRUDERS > 1
-	  // set up temp variables - undo the default scaling
-	  pid_current_extruder = 0;
-	  raw_Ki = unscalePID_i(PID_PARAM(Ki,1));
-	  raw_Kd = unscalePID_d(PID_PARAM(Kd,1));
-	  MENU_ITEM_EDIT(float52, MSG_PID_P " E2", &PID_PARAM(Kp,1), 1, 9990);
-	  // i is typically a small value so allows values below 1
-	  MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E2", &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
-	  MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E2", &raw_Kd, 1, 9990, copy_and_scalePID_d);
-      #ifdef PID_ADD_EXTRUSION_RATE
-	    MENU_ITEM_EDIT(float3, MSG_PID_C " E2", &PID_PARAM(Kc,1), 1, 9990);
-      #endif//PID_ADD_EXTRUSION_RATE
-  #endif//EXTRUDERS > 1
-  #if EXTRUDERS > 2
-	    // set up temp variables - undo the default scaling
-	    pid_current_extruder = 0;
-	    raw_Ki = unscalePID_i(PID_PARAM(Ki,2));
-	    raw_Kd = unscalePID_d(PID_PARAM(Kd,2));
-	    MENU_ITEM_EDIT(float52, MSG_PID_P " E3", &PID_PARAM(Kp,2), 1, 9990);
-	    // i is typically a small value so allows values below 1
-	    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E3", &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
-	    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E3", &raw_Kd, 1, 9990, copy_and_scalePID_d);
+    #if TEMP_SENSOR_1 != 0
+      MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+    #endif
+    #if EXTRUDERS > 2
+      #if TEMP_SENSOR_2 != 0
+        MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+      #endif
+      #if EXTRUDERS > 2
+        #if TEMP_SENSOR_3 != 0
+          MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+        #endif
+      #endif
+    #endif
+  #endif
+  #if TEMP_SENSOR_BED != 0
+    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
+  #endif
+  MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+  #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
+    MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
+    MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
+    MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
+    MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
+  #endif
+  #ifdef PIDTEMP
+    // set up temp variables - undo the default scaling
+    raw_Ki = unscalePID_i(PID_PARAM(Ki,0));
+    raw_Kd = unscalePID_d(PID_PARAM(Kd,0));
+    MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990);
+    // i is typically a small value so allows values below 1
+    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E1);
+    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_E1);
+    #ifdef PID_ADD_EXTRUSION_RATE
+      MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990);
+    #endif//PID_ADD_EXTRUSION_RATE
+    #ifdef PID_PARAMS_PER_EXTRUDER
+      #if EXTRUDERS > 1
+        // set up temp variables - undo the default scaling
+        raw_Ki = unscalePID_i(PID_PARAM(Ki,1));
+        raw_Kd = unscalePID_d(PID_PARAM(Kd,1));
+        MENU_ITEM_EDIT(float52, MSG_PID_P " E2", &PID_PARAM(Kp,1), 1, 9990);
+        // i is typically a small value so allows values below 1
+        MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E2", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E2);
+        MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E2", &raw_Kd, 1, 9990, copy_and_scalePID_d_E2);
         #ifdef PID_ADD_EXTRUSION_RATE
-	      MENU_ITEM_EDIT(float3, MSG_PID_C " E3", &PID_PARAM(Kc,2), 1, 9990);
+          MENU_ITEM_EDIT(float3, MSG_PID_C " E2", &PID_PARAM(Kc,1), 1, 9990);
         #endif//PID_ADD_EXTRUSION_RATE
-  #endif//EXTRUDERS > 2
-#endif // PID_PARAMS_PER_EXTRUDER
-#endif//PIDTEMP
-    MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
-    MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
-    END_MENU();
+
+        #if EXTRUDERS > 2
+          // set up temp variables - undo the default scaling
+          raw_Ki = unscalePID_i(PID_PARAM(Ki,2));
+          raw_Kd = unscalePID_d(PID_PARAM(Kd,2));
+          MENU_ITEM_EDIT(float52, MSG_PID_P " E3", &PID_PARAM(Kp,2), 1, 9990);
+          // i is typically a small value so allows values below 1
+          MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E3", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E3);
+          MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E3", &raw_Kd, 1, 9990, copy_and_scalePID_d_E3);
+          #ifdef PID_ADD_EXTRUSION_RATE
+            MENU_ITEM_EDIT(float3, MSG_PID_C " E3", &PID_PARAM(Kc,2), 1, 9990);
+          #endif//PID_ADD_EXTRUSION_RATE
+
+          #if EXTRUDERS > 3
+            // set up temp variables - undo the default scaling
+            raw_Ki = unscalePID_i(PID_PARAM(Ki,3));
+            raw_Kd = unscalePID_d(PID_PARAM(Kd,3));
+            MENU_ITEM_EDIT(float52, MSG_PID_P " E4", &PID_PARAM(Kp,3), 1, 9990);
+            // i is typically a small value so allows values below 1
+            MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E4", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E4);
+            MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E4", &raw_Kd, 1, 9990, copy_and_scalePID_d_E4);
+            #ifdef PID_ADD_EXTRUSION_RATE
+              MENU_ITEM_EDIT(float3, MSG_PID_C " E4", &PID_PARAM(Kc,3), 1, 9990);
+            #endif//PID_ADD_EXTRUSION_RATE
+          #endif//EXTRUDERS > 3
+        #endif//EXTRUDERS > 2
+      #endif//EXTRUDERS > 1
+    #endif //PID_PARAMS_PER_EXTRUDER
+  #endif//PIDTEMP
+  MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
+  MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
+  END_MENU();
 }
 
 static void lcd_control_temperature_preheat_pla_settings_menu()
@@ -1785,24 +1823,4 @@ char *ftostr52(const float &x)
   return conv;
 }
 
-// Callback for after editing PID i value
-// grab the PID i value out of the temp variable; scale it; then update the PID driver
-void copy_and_scalePID_i()
-{
-#ifdef PIDTEMP
-  PID_PARAM(Ki, pid_current_extruder) = scalePID_i(raw_Ki);
-  updatePID();
-#endif
-}
-
-// Callback for after editing PID d value
-// grab the PID d value out of the temp variable; scale it; then update the PID driver
-void copy_and_scalePID_d()
-{
-#ifdef PIDTEMP
-	PID_PARAM(Kd, pid_current_extruder) = scalePID_d(raw_Kd);
-  updatePID();
-#endif
-}
-
 #endif //ULTRA_LCD

From c610471b0c8b2dc8c14ec84a25387ea15d6c4cd5 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Fri, 20 Feb 2015 00:00:19 -0800
Subject: [PATCH 08/17] Add PID_PARAMS_PER_EXTRUDER conditional

---
 Marlin/ultralcd.cpp | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index dd758724d..99108fee3 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -806,6 +806,7 @@ static void lcd_control_menu()
 }
 
 #ifdef PIDTEMP
+
   // Helpers for editing PID Ki & Kd values
   // grab the PID value out of the temp variable; scale it; then update the PID driver
   void copy_and_scalePID_i(int e) {
@@ -818,19 +819,22 @@ static void lcd_control_menu()
   }
   void copy_and_scalePID_i_E1() { copy_and_scalePID_i(0); }
   void copy_and_scalePID_d_E1() { copy_and_scalePID_d(0); }
-  #if EXTRUDERS > 1
-    void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); }
-    void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); }
-    #if EXTRUDERS > 2
-      void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); }
-      void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); }
-      #if EXTRUDERS > 3
-        void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); }
-        void copy_and_scalePID_d_E5() { copy_and_scalePID_d(3); }
-      #endif
-    #endif
-  #endif
-#endif
+  #ifdef PID_PARAMS_PER_EXTRUDER
+    #if EXTRUDERS > 1
+      void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); }
+      void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); }
+      #if EXTRUDERS > 2
+        void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); }
+        void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); }
+        #if EXTRUDERS > 3
+          void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); }
+          void copy_and_scalePID_d_E5() { copy_and_scalePID_d(3); }
+        #endif //EXTRUDERS > 3
+      #endif //EXTRUDERS > 2
+    #endif //EXTRUDERS > 1
+  #endif //PID_PARAMS_PER_EXTRUDER
+
+#endif //PIDTEMP
 
 static void lcd_control_temperature_menu()
 {

From e3fd3e8fa4476b192a49f74a1fd7004237d2fb38 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Fri, 20 Feb 2015 00:08:59 -0800
Subject: [PATCH 09/17] Fix typos in checkExtruderAutoFans

---
 Marlin/temperature.cpp | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index d5bd2d63d..d50c4265b 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -455,19 +455,17 @@ void checkExtruderAutoFans()
     setExtruderAutoFanState(EXTRUDER_0_AUTO_FAN_PIN, (fanState & 1) != 0);
   #endif 
   #if defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1
-    if (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) 
+    if (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
       setExtruderAutoFanState(EXTRUDER_1_AUTO_FAN_PIN, (fanState & 2) != 0);
   #endif 
   #if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
-    if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN 
-        && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
+    if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
         && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
       setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
   #endif
   #if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
-    if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN 
-        && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
-        && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
+    if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
+        && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN
         && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN)
       setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0);
   #endif

From 09e09b308e3edb16fb383fe30c14a5b40c08e27e Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Fri, 20 Feb 2015 01:22:56 -0800
Subject: [PATCH 10/17] Tweaky spacing adjustments

---
 Marlin/ultralcd.cpp | 108 ++++++++++++++++++++++----------------------
 1 file changed, 54 insertions(+), 54 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index ec9a435d8..387437d27 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -154,18 +154,18 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
             const char* _label_pstr = PSTR(label); \
             if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
                 lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
-									            }else{\
+                              }else{\
                 lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
-									            }\
-						        }\
+                              }\
+                    }\
         if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
             lcd_quick_feedback(); \
-			encoderRateMultiplierEnabled = true; \
-			lastEncoderMovementMillis = 0; \
+      encoderRateMultiplierEnabled = true; \
+      lastEncoderMovementMillis = 0; \
             menu_action_ ## type ( args ); \
             return;\
-				        }\
-		    }\
+                }\
+        }\
     _menuItemNr++;\
 } while(0)
 #endif
@@ -460,20 +460,20 @@ static void lcd_tune_menu()
     MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_1 != 0
-	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_2 != 0
-	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
 #endif
 #if TEMP_SENSOR_3 != 0
-	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
 #endif
 
 
 #if TEMP_SENSOR_BED != 0
-	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
 #endif
-	MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
     MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
     MENU_ITEM_EDIT(int3, MSG_FLOW " 0", &extruder_multiply[0], 10, 999);
 #if TEMP_SENSOR_1 != 0
@@ -650,7 +650,7 @@ static void lcd_preheat_abs_menu()
   MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
   MENU_ITEM(function, MSG_PREHEAT_ABS_N "1", lcd_preheat_abs0);
 #if TEMP_SENSOR_1 != 0 //2 extruder preheat
-	MENU_ITEM(function, MSG_PREHEAT_ABS_N "2", lcd_preheat_abs1);
+    MENU_ITEM(function, MSG_PREHEAT_ABS_N "2", lcd_preheat_abs1);
 #endif //2 extruder preheat
 #if TEMP_SENSOR_2 != 0 //3 extruder preheat
   MENU_ITEM(function, MSG_PREHEAT_ABS_N "3", lcd_preheat_abs2);
@@ -995,16 +995,16 @@ static void lcd_control_volumetric_menu()
 	MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
 
 	if (volumetric_enabled) {
-		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
-#if EXTRUDERS > 1
-		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers);
-#if EXTRUDERS > 2
-		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
-#if EXTRUDERS > 3
-		MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
-#endif //EXTRUDERS > 3
-#endif //EXTRUDERS > 2
-#endif //EXTRUDERS > 1
+    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
+    #if EXTRUDERS > 1
+      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers);
+      #if EXTRUDERS > 2
+        MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
+        #if EXTRUDERS > 3
+          MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
+        #endif //EXTRUDERS > 3
+      #endif //EXTRUDERS > 2
+    #endif //EXTRUDERS > 1
 	}
 
 	END_MENU();
@@ -1356,47 +1356,47 @@ void lcd_update()
 		#endif
         if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP)
         {
-			int32_t encoderMultiplier = 1;
+      int32_t encoderMultiplier = 1;
 
 #ifdef ENCODER_RATE_MULTIPLIER
-			if (encoderRateMultiplierEnabled)
-			{
-				int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
+      if (encoderRateMultiplierEnabled)
+      {
+        int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
 
-				if (lastEncoderMovementMillis != 0)
-				{
-					// Note that the rate is always calculated between to passes through the 
-					// loop and that the abs of the encoderDiff value is tracked.
-					float encoderStepRate =
-						(float)(encoderMovementSteps) / ((float)(millis() - lastEncoderMovementMillis)) * 1000.0;
+        if (lastEncoderMovementMillis != 0)
+        {
+          // Note that the rate is always calculated between to passes through the 
+          // loop and that the abs of the encoderDiff value is tracked.
+          float encoderStepRate =
+            (float)(encoderMovementSteps) / ((float)(millis() - lastEncoderMovementMillis)) * 1000.0;
 
-					if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)
-					{
-						encoderMultiplier = 100;
-					}
-					else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)
-					{
-						encoderMultiplier = 10;
-					}
+          if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)
+          {
+            encoderMultiplier = 100;
+          }
+          else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)
+          {
+            encoderMultiplier = 10;
+          }
 
 #ifdef ENCODER_RATE_MULTIPLIER_DEBUG
-					SERIAL_ECHO_START;
-					SERIAL_ECHO("Enc Step Rate: ");
-					SERIAL_ECHO(encoderStepRate);
-					SERIAL_ECHO("  Multiplier: ");
-					SERIAL_ECHO(encoderMultiplier);
-					SERIAL_ECHO("  ENCODER_10X_STEPS_PER_SEC: ");
-					SERIAL_ECHO(ENCODER_10X_STEPS_PER_SEC);
-					SERIAL_ECHO("  ENCODER_100X_STEPS_PER_SEC: ");
-					SERIAL_ECHOLN(ENCODER_100X_STEPS_PER_SEC);
+          SERIAL_ECHO_START;
+          SERIAL_ECHO("Enc Step Rate: ");
+          SERIAL_ECHO(encoderStepRate);
+          SERIAL_ECHO("  Multiplier: ");
+          SERIAL_ECHO(encoderMultiplier);
+          SERIAL_ECHO("  ENCODER_10X_STEPS_PER_SEC: ");
+          SERIAL_ECHO(ENCODER_10X_STEPS_PER_SEC);
+          SERIAL_ECHO("  ENCODER_100X_STEPS_PER_SEC: ");
+          SERIAL_ECHOLN(ENCODER_100X_STEPS_PER_SEC);
 #endif
-				}
+        }
 
-				lastEncoderMovementMillis = millis();
-			}
+        lastEncoderMovementMillis = millis();
+      }
 #endif
             lcdDrawUpdate = 1;
-			encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
+            encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
             encoderDiff = 0;
             timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
         }

From a8939eec28fc3c5225d665ffe15515ad63d273a8 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Fri, 20 Feb 2015 02:08:41 -0800
Subject: [PATCH 11/17] Readability of MENU_MULTIPLIER_ITEM

Last commit before bed.
---
 Marlin/ultralcd.cpp | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 387437d27..da7a2685c 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -150,22 +150,23 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
 #ifdef ENCODER_RATE_MULTIPLIER
 #define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
     if (_menuItemNr == _lineNr) { \
-        if (lcdDrawUpdate) { \
-            const char* _label_pstr = PSTR(label); \
-            if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
-                lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
-                              }else{\
-                lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
-                              }\
-                    }\
-        if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
-            lcd_quick_feedback(); \
-      encoderRateMultiplierEnabled = true; \
-      lastEncoderMovementMillis = 0; \
-            menu_action_ ## type ( args ); \
-            return;\
-                }\
+      if (lcdDrawUpdate) { \
+        const char* _label_pstr = PSTR(label); \
+        if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
+          lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
+        }
+        else {\
+          lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
         }\
+      }\
+      if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
+        lcd_quick_feedback(); \
+        encoderRateMultiplierEnabled = true; \
+        lastEncoderMovementMillis = 0; \
+        menu_action_ ## type ( args ); \
+        return;\
+      }\
+    }\
     _menuItemNr++;\
 } while(0)
 #endif

From 430c4b65385f2e45b8d564bf1afe36949052fbd7 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Fri, 20 Feb 2015 02:17:16 -0800
Subject: [PATCH 12/17] Replace missing backslash

---
 Marlin/ultralcd.cpp | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index da7a2685c..710f96590 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -154,20 +154,20 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
         const char* _label_pstr = PSTR(label); \
         if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
           lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
-        }
-        else {\
+        } \
+        else { \
           lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
-        }\
-      }\
-      if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
+        } \
+      } \
+      if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
         lcd_quick_feedback(); \
         encoderRateMultiplierEnabled = true; \
         lastEncoderMovementMillis = 0; \
         menu_action_ ## type ( args ); \
-        return;\
-      }\
-    }\
-    _menuItemNr++;\
+        return; \
+      } \
+    } \
+    _menuItemNr++; \
 } while(0)
 #endif
 #define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0)

From 27ac3e985d9c18f8df27edcceedcbd6b8f7b8bb1 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sat, 21 Feb 2015 18:17:37 -0800
Subject: [PATCH 13/17] Add options to example_configurations

---
 Marlin/Configuration_adv.h                                  | 6 +++---
 Marlin/example_configurations/Hephestos/Configuration_adv.h | 5 +++++
 Marlin/example_configurations/K8200/Configuration_adv.h     | 5 +++++
 Marlin/example_configurations/SCARA/Configuration_adv.h     | 5 +++++
 Marlin/example_configurations/WITBOX/Configuration_adv.h    | 5 +++++
 Marlin/example_configurations/delta/Configuration_adv.h     | 5 +++++
 Marlin/example_configurations/makibox/Configuration_adv.h   | 5 +++++
 .../tvrrug/Round2/Configuration_adv.h                       | 5 +++++
 8 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index d3795074a..f2b312441 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -284,10 +284,10 @@
 //=============================Additional Features===========================
 //===========================================================================
 
-#define ENCODER_RATE_MULTIPLIER	 		// If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
-#define ENCODER_10X_STEPS_PER_SEC 75	// If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
 #define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
-//#define ENCODER_RATE_MULTIPLIER_DEBUG   // If defined, output the encoder steps per second value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
 
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 1412c9941..0a9c8a129 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -284,6 +284,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index b3d9ed840..bf2daede0 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -284,6 +284,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 215ee494d..a32669881 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -287,6 +287,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 1412c9941..0a9c8a129 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -284,6 +284,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/delta/Configuration_adv.h b/Marlin/example_configurations/delta/Configuration_adv.h
index 79d2036a0..9b49bfe1e 100644
--- a/Marlin/example_configurations/delta/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/Configuration_adv.h
@@ -279,6 +279,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 6c181fb55..1033b9989 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -283,6 +283,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 64fd9ecc9..df413f6e6 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -284,6 +284,11 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
+//#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
+
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 

From 422582da71189b7e516bb0bb85feedc2eeae15cb Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sat, 21 Feb 2015 18:24:16 -0800
Subject: [PATCH 14/17] Prep formatting for upcoming PR

---
 Marlin/ultralcd.cpp | 60 ++++++++++++++++++++-------------------------
 1 file changed, 27 insertions(+), 33 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 9bd50d565..a1a1b187d 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -143,7 +143,7 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
     _menuItemNr++;\
 } while(0)
 #ifdef ENCODER_RATE_MULTIPLIER
-#define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
+  #define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
     if (_menuItemNr == _lineNr) { \
       if (lcdDrawUpdate) { \
         const char* _label_pstr = PSTR(label); \
@@ -163,18 +163,18 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
       } \
     } \
     _menuItemNr++; \
-} while(0)
-#endif
+  } while(0)
+#endif //ENCODER_RATE_MULTIPLIER
 #define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0)
 #define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
 #define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
 #ifdef ENCODER_RATE_MULTIPLIER
-#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
-#else
-#define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
-#endif
+  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
+  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#else //!ENCODER_RATE_MULTIPLIER
+  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
+  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#endif //!ENCODER_RATE_MULTIPLIER
 #define END_MENU() \
     if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \
     if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \
@@ -1422,28 +1422,21 @@ void lcd_update()
         {
       int32_t encoderMultiplier = 1;
 
-#ifdef ENCODER_RATE_MULTIPLIER
-      if (encoderRateMultiplierEnabled)
-      {
-        int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
+  #ifdef ENCODER_RATE_MULTIPLIER
 
-        if (lastEncoderMovementMillis != 0)
-        {
-          // Note that the rate is always calculated between to passes through the 
-          // loop and that the abs of the encoderDiff value is tracked.
-          float encoderStepRate =
-            (float)(encoderMovementSteps) / ((float)(millis() - lastEncoderMovementMillis)) * 1000.0;
+    if (encoderRateMultiplierEnabled) {
+      int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
 
-          if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)
-          {
-            encoderMultiplier = 100;
-          }
-          else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC)
-          {
-            encoderMultiplier = 10;
-          }
+      if (lastEncoderMovementMillis != 0) {
+        // Note that the rate is always calculated between to passes through the 
+        // loop and that the abs of the encoderDiff value is tracked.
+        float encoderStepRate =
+          (float)(encoderMovementSteps) / ((float)(millis() - lastEncoderMovementMillis)) * 1000.0;
 
-#ifdef ENCODER_RATE_MULTIPLIER_DEBUG
+        if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC)     encoderMultiplier = 100;
+        else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
+
+        #ifdef ENCODER_RATE_MULTIPLIER_DEBUG
           SERIAL_ECHO_START;
           SERIAL_ECHO("Enc Step Rate: ");
           SERIAL_ECHO(encoderStepRate);
@@ -1453,12 +1446,13 @@ void lcd_update()
           SERIAL_ECHO(ENCODER_10X_STEPS_PER_SEC);
           SERIAL_ECHO("  ENCODER_100X_STEPS_PER_SEC: ");
           SERIAL_ECHOLN(ENCODER_100X_STEPS_PER_SEC);
-#endif
-        }
-
-        lastEncoderMovementMillis = millis();
+        #endif //ENCODER_RATE_MULTIPLIER_DEBUG
       }
-#endif
+
+      lastEncoderMovementMillis = millis();
+    }
+  #endif //ENCODER_RATE_MULTIPLIER
+
             lcdDrawUpdate = 1;
             encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
             encoderDiff = 0;

From 3a26804d80c0c14e34bf867e1b076b2285b9918a Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sat, 21 Feb 2015 18:41:04 -0800
Subject: [PATCH 15/17] Adapt to latest PID code and fix typos

---
 Marlin/ultralcd.cpp | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index a1a1b187d..babdb98ec 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -863,7 +863,7 @@ static void lcd_control_menu()
         void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); }
         #if EXTRUDERS > 3
           void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); }
-          void copy_and_scalePID_d_E5() { copy_and_scalePID_d(3); }
+          void copy_and_scalePID_d_E4() { copy_and_scalePID_d(3); }
         #endif //EXTRUDERS > 3
       #endif //EXTRUDERS > 2
     #endif //EXTRUDERS > 1
@@ -905,13 +905,12 @@ static void lcd_control_temperature_menu()
   #endif
   #ifdef PIDTEMP
     // set up temp variables - undo the default scaling
-    pid_current_extruder = 0;
     raw_Ki = unscalePID_i(PID_PARAM(Ki,0));
     raw_Kd = unscalePID_d(PID_PARAM(Kd,0));
     MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990);
     // i is typically a small value so allows values below 1
-    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
-    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d);
+    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E1);
+    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_E1);
     #ifdef PID_ADD_EXTRUSION_RATE
       MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990);
     #endif//PID_ADD_EXTRUSION_RATE

From 1c13cd604bfb15a03d09f186520f7f531a1624ef Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Sat, 21 Feb 2015 18:45:10 -0800
Subject: [PATCH 16/17] Formatting in babysteps defines

---
 Marlin/ultralcd.cpp | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index babdb98ec..51658f141 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -99,19 +99,19 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
 #define ENCODER_FEEDRATE_DEADZONE 10
 
 #if !defined(LCD_I2C_VIKI)
-#ifndef ENCODER_STEPS_PER_MENU_ITEM
-#define ENCODER_STEPS_PER_MENU_ITEM 5
-#endif
-#ifndef ENCODER_PULSES_PER_STEP
-#define ENCODER_PULSES_PER_STEP 1
-#endif
+  #ifndef ENCODER_STEPS_PER_MENU_ITEM
+    #define ENCODER_STEPS_PER_MENU_ITEM 5
+  #endif
+  #ifndef ENCODER_PULSES_PER_STEP
+    #define ENCODER_PULSES_PER_STEP 1
+  #endif
 #else
-#ifndef ENCODER_STEPS_PER_MENU_ITEM
-#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
-#endif
-#ifndef ENCODER_PULSES_PER_STEP
-#define ENCODER_PULSES_PER_STEP 1
-#endif
+  #ifndef ENCODER_STEPS_PER_MENU_ITEM
+    #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
+  #endif
+  #ifndef ENCODER_PULSES_PER_STEP
+    #define ENCODER_PULSES_PER_STEP 1
+  #endif
 #endif
 
 

From a57869ba496ba7848e30fd0645204e6b41de4a07 Mon Sep 17 00:00:00 2001
From: alexborro <alexborro@gmail.com>
Date: Sun, 22 Feb 2015 11:02:04 -0300
Subject: [PATCH 17/17] Dummy Thermistor Table for testing purposes

Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
---
 Marlin/Configuration.h    |  1 +
 Marlin/thermistortables.h | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 41e1ed7ed..afcd9134c 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -118,6 +118,7 @@ Here are some standard links for getting your machine calibrated:
 // 1010 is Pt1000 with 1k pullup (non standard)
 // 147 is Pt100 with 4k7 pullup
 // 110 is Pt100 with 1k pullup (non standard)
+// 999 is a Dummy Table. It will ALWAYS read 25C.. Use it for Testing or Development purposes. NEVER for production machine.
 
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1
diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index 599d0d05c..aa1019b0a 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -1095,6 +1095,16 @@ const short temptable_1047[][2] PROGMEM = {
 };
 #endif
 
+#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User defined table
+// Dummy Thermistor table.. It will ALWAYS read 25C.
+const short temptable_999[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 25},
+   {1023*OVERSAMPLENR, 25}
+};
+#endif
+
+
+
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)