MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Clean up and document load/unload/pause/resume

Browse Source
This commit is contained in:
Scott Lahteine 2018-01-20 10:46:56 -06:00
parent c970869d74
commit c373afbddd
1 changed files with 85 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

107
Marlin/Marlin_main.cpp
View File

@ -6301,6 +6301,15 @@ inline void gcode_M17() {
}
#endif
/**
* Ensure a safe temperature for extrusion
*
* - Fail if the TARGET temperature is too low
* - Display LCD placard with temperature status
* - Return when heating is done or aborted
*
* Returns 'true' if heating was completed, 'false' for abort
*/
static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT) {
#if ENABLED(PREVENT_COLD_EXTRUSION)
@ -6325,7 +6334,19 @@ inline void gcode_M17() {
return status;
}
static bool load_filament(const float &load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0,
/**
* Load filament into the hotend
*
* - Fail if the a safe temperature was not reached
* - If pausing for confirmation, wait for a click or M108
* - Show "wait for load" placard
* - Load and purge filament
* - Show "Purge more" / "Continue" menu
* - Return when "Continue" is selected
*
* Returns 'true' if load was completed, 'false' for abort
*/
static bool load_filament(const float &load_length=0, const float &purge_length=0, const int8_t max_beep_count=0,
const bool show_lcd=false, const bool pause_for_user=false,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT
) {
@ -6368,15 +6389,15 @@ inline void gcode_M17() {
}
#if ENABLED(ULTIPANEL)
if (show_lcd) // Show "load" message
if (show_lcd) // Show "wait for load" message
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode);
#endif
// Load filament
do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
if (load_length) do_pause_e_move(load_length, FILAMENT_CHANGE_LOAD_FEEDRATE);
do {
if (extrude_length > 0) {
if (purge_length > 0) {
// "Wait for filament purge"
#if ENABLED(ULTIPANEL)
if (show_lcd)
@ -6384,10 +6405,10 @@ inline void gcode_M17() {
#endif
// Extrude filament to get into hotend
do_pause_e_move(extrude_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
do_pause_e_move(purge_length, ADVANCED_PAUSE_EXTRUDE_FEEDRATE);
}
// Show "Extrude More" / "Resume" menu and wait for reply
// Show "Purge More" / "Resume" menu and wait for reply
#if ENABLED(ULTIPANEL)
if (show_lcd) {
KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -6398,7 +6419,7 @@ inline void gcode_M17() {
}
#endif
// Keep looping if "Extrude More" was selected
// Keep looping if "Purge More" was selected
} while (
#if ENABLED(ULTIPANEL)
show_lcd && advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE
@ -6410,6 +6431,16 @@ inline void gcode_M17() {
return true;
}
/**
* Unload filament from the hotend
*
* - Fail if the a safe temperature was not reached
* - Show "wait for unload" placard
* - Retract, pause, then unload filament
* - Disable E stepper (on most machines)
*
* Returns 'true' if unload was completed, 'false' for abort
*/
static bool unload_filament(const float &unload_length, const bool show_lcd=false,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT
) {
@ -6450,6 +6481,19 @@ inline void gcode_M17() {
return true;
}
/**
* Pause procedure
*
* - Abort if already paused
* - Send host action for pause, if configured
* - Abort if TARGET temperature is too low
* - Display "wait for start of filament change" (if a length was specified)
* - Initial retract, if current temperature is hot enough
* - Park the nozzle at the given position
* - Call unload_filament (if a length was specified)
*
* Returns 'true' if pause was completed, 'false' for abort
*/
static bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false) {
if (did_pause_print) return false; // already paused
@ -6457,11 +6501,6 @@ inline void gcode_M17() {
SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
#endif
#if ENABLED(ULTIPANEL)
if (show_lcd) // Show initial message
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT);
#endif
if (!DEBUGGING(DRYRUN) && unload_length && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD);
@ -6481,7 +6520,7 @@ inline void gcode_M17() {
#if ENABLED(SDSUPPORT)
if (card.sdprinting) {
card.pauseSDPrint();
++did_pause_print;
++did_pause_print; // Indicate SD pause also
}
#endif
print_job_timer.pause();
@ -6506,6 +6545,13 @@ inline void gcode_M17() {
return true;
}
/**
* - Show "Insert filament and press button to continue"
* - Wait for a click before returning
* - Heaters can time out, reheated before accepting a click
*
* Used by M125 and M600
*/
static void wait_for_filament_reload(const int8_t max_beep_count=0) {
bool nozzle_timed_out = false;
@ -6592,12 +6638,29 @@ inline void gcode_M17() {
KEEPALIVE_STATE(IN_HANDLER);
}
static void resume_print(const float &load_length=0, const float &extrude_length=ADVANCED_PAUSE_EXTRUDE_LENGTH, const int8_t max_beep_count=0) {
bool nozzle_timed_out = false;
/**
* Resume or Start print procedure
*
* - Abort if not paused
* - Reset heater idle timers
* - Load filament if specified, but only if:
* - a nozzle timed out, or
* - the nozzle is already heated.
* - Display "wait for print to resume"
* - Re-prime the nozzle...
* - FWRETRACT: Recover/prime from the prior G10.
* - !FWRETRACT: Retract by resume_position[E], if negative.
* Not sure how this logic comes into use.
* - Move the nozzle back to resume_position
* - Sync the planner E to resume_position[E]
* - Send host action for resume, if configured
* - Resume the current SD print job, if any
*/
static void resume_print(const float &load_length=0, const float &purge_length=ADVANCED_PAUSE_EXTRUDE_LENGTH, const int8_t max_beep_count=0) {
if (!did_pause_print) return;
// Re-enable the heaters if they timed out
bool nozzle_timed_out = false;
HOTEND_LOOP() {
nozzle_timed_out |= thermalManager.is_heater_idle(e);
thermalManager.reset_heater_idle_timer(e);
@ -6605,7 +6668,7 @@ inline void gcode_M17() {
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) {
// Load the new filament
load_filament(load_length, extrude_length, max_beep_count, true, nozzle_timed_out);
load_filament(load_length, purge_length, max_beep_count, true, nozzle_timed_out);
}
#if ENABLED(ULTIPANEL)
@ -6619,7 +6682,7 @@ inline void gcode_M17() {
if (fwretract.retracted[active_extruder])
do_pause_e_move(-fwretract.retract_length, fwretract.retract_feedrate_mm_s);
#else
// If resume_position negative
// If resume_position is negative
if (resume_position[E_AXIS] < 0) do_pause_e_move(resume_position[E_AXIS], PAUSE_PARK_RETRACT_FEEDRATE);
#endif
@ -8521,11 +8584,11 @@ inline void gcode_M121() { endstops.enable_globally(false); }
inline void gcode_M125() {
// Initial retract before move to filament change position
const float retract = parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
const float retract = -FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
#ifdef PAUSE_PARK_RETRACT_LENGTH
- (PAUSE_PARK_RETRACT_LENGTH)
+ (PAUSE_PARK_RETRACT_LENGTH)
#endif
;
);
point_t park_point = NOZZLE_PARK_POINT;
@ -10150,7 +10213,7 @@ inline void gcode_M502() {
const float load_length = FABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) :
filament_change_load_length[target_extruder]);
// Show initial message
// Show initial "wait for load" message
#if ENABLED(ULTIPANEL)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, ADVANCED_PAUSE_MODE_LOAD_FILAMENT, target_extruder);
#endif