[1.1.x] Split TRIGORILLA into 1.3 and 1.4 (#10468)

Marlin/Makefile

@@ -193,6 +193,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),503)
 else ifeq ($(HARDWARE_MOTHERBOARD),431)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),343)
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+else ifeq ($(HARDWARE_MOTHERBOARD),443)
 # Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),243)
 

Marlin/SanityCheck.h

@@ -273,8 +273,11 @@
 #endif
 
 #define BOARD_MKS_13     -47
+#define BOARD_TRIGORILLA -343
 #if MB(MKS_13)
   #error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
+#elif MB(BOARD_TRIGORILLA)
+  #error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration."
 #endif
 
 /**

Marlin/boards.h

@@ -76,7 +76,8 @@
 #define BOARD_RUMBA             80    // Rumba
 #define BOARD_BQ_ZUM_MEGA_3D    503   // bq ZUM Mega 3D
 #define BOARD_MAKEBOARD_MINI    431   // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-#define BOARD_TRIGORILLA        343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB
+#define BOARD_TRIGORILLA_13     343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB
+#define BOARD_TRIGORILLA_14     443   // TriGorilla Anycubic version 1.4 based on RAMPS EFB
 #define BOARD_RAMPS_ENDER_4     243   // Creality: Ender-4, CR-8
 
 //

Marlin/pins.h

@@ -134,8 +134,12 @@
   #include "pins_BQ_ZUM_MEGA_3D.h"    // ATmega2560
 #elif MB(MAKEBOARD_MINI)
   #include "pins_MAKEBOARD_MINI.h"    // ATmega2560
-#elif MB(TRIGORILLA)
-  #include "pins_TRIGORILLA.h"        // ATmega2560
+#elif MB(TRIGORILLA_13)
+  #include "pins_TRIGORILLA_13.h"     // ATmega2560
+#elif MB(TRIGORILLA_14)
+  #include "pins_TRIGORILLA_14.h"     // ATmega2560
+#elif MB(RAMPS_ENDER_4)
+  #include "pins_RAMPS_ENDER_4.h"     // ATmega2560
 
 //
 // Other ATmega1280, ATmega2560
@@ -177,8 +181,6 @@
   #include "pins_GT2560_REV_A.h"      // ATmega1280, ATmega2560
 #elif MB(GT2560_REV_A_PLUS)
   #include "pins_GT2560_REV_A_PLUS.h" // ATmega1280, ATmega2560
-#elif MB(RAMPS_ENDER_4)
-  #include "pins_RAMPS_ENDER_4.h"     // ATmega2560
 
 //
 // ATmega1281, ATmega2561

Marlin/pins_TRIGORILLA_13.h

@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Mega with RAMPS v1.3 for Anycubic
+ */
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Anycubic RAMPS 1.3"
+#endif
+
+#define IS_RAMPS_EFB
+#define RAMPS_D9_PIN       44
+#define ORIG_E0_AUTO_FAN_PIN RAMPS_D9_PIN
+
+#include "pins_RAMPS_13.h"
+
+#undef E1_STEP_PIN
+#undef E1_DIR_PIN
+#undef E1_ENABLE_PIN
+#undef E1_CS_PIN

Marlin/pins_TRIGORILLA_14.h

@@ -22,9 +22,6 @@
 
 /**
  * Arduino Mega with RAMPS v1.4 for Anycubic
- *
- * Defines RAMPS_D44_PIN 44
- * Defines FAN_PIN RAMPS_D44_PIN or -1
  */
 
 #ifndef BOARD_NAME
@@ -35,12 +32,7 @@
 
 #include "pins_RAMPS_13.h"
 
-#undef FAN_PIN
-#define RAMPS_D44_PIN      44
-#define FAN_PIN            RAMPS_D44_PIN
-
-#undef ORIG_E0_AUTO_FAN_PIN
-#define ORIG_E0_AUTO_FAN_PIN RAMPS_D44_PIN
+#define FAN2_PIN           44
 
 #undef E1_STEP_PIN
 #undef E1_DIR_PIN