From c4f1a191c3dc426af4472eb850a17f6363a03855 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 5 Feb 2018 20:31:02 -0600
Subject: [PATCH] Marlin.ino needs no content

---
 Marlin/Marlin.ino      | 109 +++++++++++++++++------------------------
 Marlin/Marlin_main.cpp |   2 +-
 2 files changed, 46 insertions(+), 65 deletions(-)

diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino
index 49b6fd14b..842b2a14b 100644
--- a/Marlin/Marlin.ino
+++ b/Marlin/Marlin.ino
@@ -1,72 +1,53 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
+/*
+================================================================================
 
-/**
- * About Marlin
- *
- * This firmware is a mashup between Sprinter and grbl.
- *  - https://github.com/kliment/Sprinter
- *  - https://github.com/simen/grbl/tree
- */
+  Marlin Firmware
 
-#include "MarlinConfig.h"
+  (c) 2011-2018 MarlinFirmware
+  Portions of Marlin are (c) by their respective authors.
+  All code complies with GPLv2 and/or GPLv3
 
-#if ENABLED(ULTRA_LCD)
-  #if ENABLED(LCD_I2C_TYPE_PCF8575)
-    #include <Wire.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
-    #include <Wire.h>
-    #include <LiquidTWI2.h>
-  #elif ENABLED(LCM1602)
-    #include <Wire.h>
-    #include <LCD.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(DOGLCD)
-    #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://github.com/olikraus/U8glib_Arduino)
-  #else
-    #include <LiquidCrystal.h> // library for character LCD
-  #endif
-#endif
+================================================================================
 
-#if HAS_DIGIPOTSS
-  #include <SPI.h>
-#endif
+Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
-#if ENABLED(DIGIPOT_I2C)
-  #include <Wire.h>
-#endif
+To configure Marlin you must edit Configuration.h and Configuration_adv.h
+located in the root 'Marlin' folder. Check the config/examples folder to see if
+there's a more suitable starting-point for your specific hardware.
 
-#if ENABLED(HAVE_TMCDRIVER)
-  #include <SPI.h>
-  #include <TMC26XStepper.h>
-#endif
+Before diving in, we recommend the following essential links:
 
-#if ENABLED(HAVE_TMC2130)
-  #include <SPI.h>
-  #include <TMC2130Stepper.h>
-#endif
+Marlin Firmware Official Website
 
-#if ENABLED(HAVE_L6470DRIVER)
-  #include <SPI.h>
-  #include <L6470.h>
-#endif
+  - http://marlinfw.org/
+    The official Marlin Firmware website contains the most up-to-date
+    documentation. Contributions are always welcome!
+
+Configuration
+
+  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+    A good 20-minute overview of Marlin configuration by Tom Sanladerer.
+    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
+    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
+
+  - http://marlinfw.org/docs/configuration/configuration.html
+    Marlin's configuration options are explained in more detail here.
+
+Getting Help
+
+  - http://forums.reprap.org/list.php?415
+    The Marlin Discussion Forum is a great place to get help from other Marlin
+    users who may have experienced similar issues to your own.
+
+  - https://github.com/MarlinFirmware/Marlin/issues
+    With a free GitHub account you can provide us with feedback, bug reports,
+    and feature requests via the Marlin Issue Queue.
+
+Contributing
+
+  - http://marlinfw.org/docs/development/contributing.html
+    If you'd like to contribute to Marlin, read this first!
+
+  - http://marlinfw.org/docs/development/coding_standards.html
+    Before submitting code get to know the Coding Standards.
+*/
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 112e58c80..e577f4cb3 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -25,7 +25,7 @@
  *
  * This firmware is a mashup between Sprinter and grbl.
  *  - https://github.com/kliment/Sprinter
- *  - https://github.com/simen/grbl/tree
+ *  - https://github.com/grbl/grbl
  */
 
 /**