diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 8e9459081..9b2c4007a 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -405,10 +405,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index c0c3cc7b2..6a6eccc27 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -402,10 +402,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index fc61c6279..2f2a653cb 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index e35123826..25cf538da 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -418,10 +418,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 1d67d1e70..94752253f 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -438,10 +438,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 6756843b4..9c00bcf20 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -423,10 +423,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 1e94dd9d3..288cb52fc 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -417,10 +417,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 7fe6a45c9..c81f5b1d7 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -431,10 +431,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index a1b3bb282..45c4ab705 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -443,10 +443,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 502be68ce..4cb81a65b 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index fc11b8103..2b99d46be 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -445,10 +445,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 339956ca3..fabc8e07d 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -451,10 +451,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 70241e7d1..0689d6384 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -426,10 +426,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 2c9c97b5e..6e6855c97 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -413,10 +413,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.