MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal

Browse Source 
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
This commit is contained in:
Scott Lahteine 2017-04-14 22:32:12 -05:00 committed by GitHub
commit cf6f483378
54 changed files with 3659 additions and 167 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
.travis.yml
View File

@ -388,9 +388,9 @@ script:
- opt_enable AUTO_BED_LEVELING_BILINEAR Z_PROBE_ALLEN_KEY
- build_marlin
#
# Delta Config (Mini Kossel)
# Delta Config (FLSUN AC because it's complex)
#
- use_example_configs delta/kossel_mini
- use_example_configs delta/FLSUN/auto_calibrate
- build_marlin
#
# Makibox Config need to check board type for Teensy++ 2.0

17
Marlin/Conditionals_post.h
View File

@ -721,6 +721,14 @@
#ifndef DELTA_TOWER_ANGLE_TRIM_3
#define DELTA_TOWER_ANGLE_TRIM_3 0.0
#endif
#if ENABLED(DELTA_AUTO_CALIBRATION)
#ifndef H_FACTOR
#define H_FACTOR 1.00
#endif
#ifndef R_FACTOR
#define R_FACTOR -2.25
#endif
#endif
#endif
/**
@ -797,6 +805,15 @@
#define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
#endif
// Updated G92 behavior shifts the workspace
#define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS)
// The home offset also shifts the coordinate space
#define HAS_HOME_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DELTA))
// Either offset yields extra calculations on all moves
#define HAS_WORKSPACE_OFFSET (HAS_POSITION_SHIFT || HAS_HOME_OFFSET)
// M206 doesn't apply to DELTA
#define HAS_M206_COMMAND (HAS_HOME_OFFSET && DISABLED(DELTA))
// LCD timeout to status screen default is 15s
#ifndef LCD_TIMEOUT_TO_STATUS
#define LCD_TIMEOUT_TO_STATUS 15000

1
Marlin/Configuration.h
View File

@ -695,7 +695,6 @@
//#define Z_MIN_PROBE_ENDSTOP
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Enable Z Probe Repeatability test to see how accurate your probe is
//#define Z_MIN_PROBE_REPEATABILITY_TEST

6
Marlin/Configuration_adv.h
View File

@ -677,7 +677,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@
#endif // ENABLED(HAVE_TMC2130)
// @section L6470
/**
* Enable this section if you have L6470 motor drivers.
* You need to import the L6470 library into the Arduino IDE for this.
* (https://github.com/ameyer/Arduino-L6470)
*/
// @section l6470
//#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)

58
Marlin/Marlin.h
View File

@ -228,32 +228,52 @@ extern volatile bool wait_for_heatup;
extern float current_position[NUM_AXIS];
// Workspace offsets
#if DISABLED(NO_WORKSPACE_OFFSETS)
extern float position_shift[XYZ],
home_offset[XYZ],
workspace_offset[XYZ];
#define LOGICAL_POSITION(POS, AXIS) ((POS) + workspace_offset[AXIS])
#define RAW_POSITION(POS, AXIS) ((POS) - workspace_offset[AXIS])
#else
#define LOGICAL_POSITION(POS, AXIS) (POS)
#define RAW_POSITION(POS, AXIS) (POS)
#if HAS_WORKSPACE_OFFSET
#if HAS_HOME_OFFSET
extern float home_offset[XYZ];
#endif
#if HAS_POSITION_SHIFT
extern float position_shift[XYZ];
#endif
#endif
#define LOGICAL_X_POSITION(POS) LOGICAL_POSITION(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) LOGICAL_POSITION(POS, Y_AXIS)
#define LOGICAL_Z_POSITION(POS) LOGICAL_POSITION(POS, Z_AXIS)
#define RAW_X_POSITION(POS) RAW_POSITION(POS, X_AXIS)
#define RAW_Y_POSITION(POS) RAW_POSITION(POS, Y_AXIS)
#define RAW_Z_POSITION(POS) RAW_POSITION(POS, Z_AXIS)
#define RAW_CURRENT_POSITION(AXIS) RAW_POSITION(current_position[AXIS], AXIS)
#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
extern float workspace_offset[XYZ];
#define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
#elif HAS_HOME_OFFSET
#define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
#elif HAS_POSITION_SHIFT
#define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
#else
#define WORKSPACE_OFFSET(AXIS) 0
#endif
#define LOGICAL_POSITION(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
#define RAW_POSITION(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS))
#if HAS_POSITION_SHIFT || DISABLED(DELTA)
#define LOGICAL_X_POSITION(POS) LOGICAL_POSITION(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) LOGICAL_POSITION(POS, Y_AXIS)
#define RAW_X_POSITION(POS) RAW_POSITION(POS, X_AXIS)
#define RAW_Y_POSITION(POS) RAW_POSITION(POS, Y_AXIS)
#else
#define LOGICAL_X_POSITION(POS) (POS)
#define LOGICAL_Y_POSITION(POS) (POS)
#define RAW_X_POSITION(POS) (POS)
#define RAW_Y_POSITION(POS) (POS)
#endif
#define LOGICAL_Z_POSITION(POS) LOGICAL_POSITION(POS, Z_AXIS)
#define RAW_Z_POSITION(POS) RAW_POSITION(POS, Z_AXIS)
#define RAW_CURRENT_POSITION(A) RAW_##A##_POSITION(current_position[A##_AXIS])
// Hotend Offsets
#if HOTENDS > 1
extern float hotend_offset[XYZ][HOTENDS];
#endif
// Software Endstops
extern float soft_endstop_min[XYZ];
extern float soft_endstop_max[XYZ];
extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
#if HAS_SOFTWARE_ENDSTOPS
extern bool soft_endstops_enabled;
@ -263,7 +283,7 @@ extern float soft_endstop_max[XYZ];
#define clamp_to_software_endstops(x) NOOP
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
void update_software_endstops(const AxisEnum axis);
#endif

486
Marlin/Marlin_main.cpp
View File

@ -61,6 +61,7 @@
* G30 - Single Z probe, probes bed at X Y location (defaults to current XY location)
* G31 - Dock sled (Z_PROBE_SLED only)
* G32 - Undock sled (Z_PROBE_SLED only)
* G33 - Delta '4-point' auto calibration iteration
* G38 - Probe target - similar to G28 except it uses the Z_MIN_PROBE for all three axes
* G90 - Use Absolute Coordinates
* G91 - Use Relative Coordinates
@ -146,7 +147,7 @@
S<print> T<travel> minimum speeds
B<minimum segment time>
X<max X jerk>, Y<max Y jerk>, Z<max Z jerk>, E<max E jerk>
* M206 - Set additional homing offset.
* M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT)
@ -179,7 +180,7 @@
* M410 - Quickstop. Abort all planned moves.
* M420 - Enable/Disable Leveling (with current values) S1=enable S0=disable (Requires MESH_BED_LEVELING or ABL)
* M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> (Requires MESH_BED_LEVELING or AUTO_BED_LEVELING_UBL)
* M428 - Set the home_offset based on the current_position. Nearest edge applies.
* M428 - Set the home_offset based on the current_position. Nearest edge applies. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
* M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
* M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
@ -408,18 +409,20 @@ bool axis_relative_modes[] = AXIS_RELATIVE_MODES,
float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA),
volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0);
#if DISABLED(NO_WORKSPACE_OFFSETS)
// The distance that XYZ has been offset by G92. Reset by G28.
float position_shift[XYZ] = { 0 };
// This offset is added to the configured home position.
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[XYZ] = { 0 };
// The above two are combined to save on computes
float workspace_offset[XYZ] = { 0 };
#if HAS_WORKSPACE_OFFSET
#if HAS_POSITION_SHIFT
// The distance that XYZ has been offset by G92. Reset by G28.
float position_shift[XYZ] = { 0 };
#endif
#if HAS_HOME_OFFSET
// This offset is added to the configured home position.
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[XYZ] = { 0 };
#endif
#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
// The above two are combined to save on computes
float workspace_offset[XYZ] = { 0 };
#endif
#endif
// Software Endstops are based on the configured limits.
@ -1381,7 +1384,7 @@ bool get_target_extruder_from_command(int code) {
#endif // DUAL_X_CARRIAGE
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
/**
* Software endstops can be used to monitor the open end of
@ -1393,7 +1396,18 @@ bool get_target_extruder_from_command(int code) {
* at the same positions relative to the machine.
*/
void update_software_endstops(const AxisEnum axis) {
const float offs = workspace_offset[axis] = home_offset[axis] + position_shift[axis];
const float offs = 0.0
#if HAS_HOME_OFFSET
+ home_offset[axis]
#endif
#if HAS_POSITION_SHIFT
+ position_shift[axis]
#endif
;
#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
workspace_offset[axis] = offs;
#endif
#if ENABLED(DUAL_X_CARRIAGE)
if (axis == X_AXIS) {
@ -1426,8 +1440,10 @@ bool get_target_extruder_from_command(int code) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("For ", axis_codes[axis]);
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_HOME_OFFSET
SERIAL_ECHOPAIR(" axis:\n home_offset = ", home_offset[axis]);
#endif
#if HAS_POSITION_SHIFT
SERIAL_ECHOPAIR("\n position_shift = ", position_shift[axis]);
#endif
SERIAL_ECHOPAIR("\n soft_endstop_min = ", soft_endstop_min[axis]);
@ -1441,9 +1457,9 @@ bool get_target_extruder_from_command(int code) {
#endif
}
#endif // NO_WORKSPACE_OFFSETS
#endif // HAS_WORKSPACE_OFFSET || DUAL_X_CARRIAGE
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
/**
* Change the home offset for an axis, update the current
* position and the software endstops to retain the same
@ -1457,7 +1473,7 @@ bool get_target_extruder_from_command(int code) {
home_offset[axis] = v;
update_software_endstops(axis);
}
#endif // NO_WORKSPACE_OFFSETS
#endif // HAS_M206_COMMAND
/**
* Set an axis' current position to its home position (after homing).
@ -1488,7 +1504,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
axis_known_position[axis] = axis_homed[axis] = true;
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_POSITION_SHIFT
position_shift[axis] = 0;
update_software_endstops(axis);
#endif
@ -1564,7 +1580,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_HOME_OFFSET
SERIAL_ECHOPAIR("> home_offset[", axis_codes[axis]);
SERIAL_ECHOLNPAIR("] = ", home_offset[axis]);
#endif
@ -2299,7 +2315,7 @@ static void clean_up_after_endstop_or_probe_move() {
SERIAL_PROTOCOLPGM(" Y: ");
SERIAL_PROTOCOL_F(y, 3);
SERIAL_PROTOCOLPGM(" Z: ");
SERIAL_PROTOCOL_F(FIXFLOAT(measured_z), 3);
SERIAL_PROTOCOL_F(measured_z, 3);
SERIAL_EOL;
}
@ -4035,6 +4051,11 @@ inline void gcode_G28() {
* L Set the Left limit of the probing grid
* R Set the Right limit of the probing grid
*
* Parameters with DEBUG_LEVELING_FEATURE only:
*
* C Make a totally fake grid with no actual probing.
* For use in testing when no probing is possible.
*
* Parameters with BILINEAR leveling only:
*
* Z Supply an additional Z probe offset
@ -4077,6 +4098,12 @@ inline void gcode_G28() {
#endif
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY)
const bool faux = code_seen('C') && code_value_bool();
#else
bool constexpr faux = false;
#endif
// Don't allow auto-leveling without homing first
if (axis_unhomed_error(true, true, true)) return;
@ -4292,7 +4319,7 @@ inline void gcode_G28() {
SYNC_PLAN_POSITION_KINEMATIC();
}
setup_for_endstop_or_probe_move();
if (!faux) setup_for_endstop_or_probe_move();
//xProbe = yProbe = measured_z = 0;
@ -4550,7 +4577,7 @@ inline void gcode_G28() {
if (!position_is_reachable(pos, true)) continue;
#endif
measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
if (isnan(measured_z)) {
planner.abl_enabled = abl_should_enable;
@ -4585,7 +4612,7 @@ inline void gcode_G28() {
// Retain the last probe position
xProbe = LOGICAL_X_POSITION(points[i].x);
yProbe = LOGICAL_Y_POSITION(points[i].y);
measured_z = points[i].z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
measured_z = points[i].z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
}
if (isnan(measured_z)) {
@ -4624,7 +4651,7 @@ inline void gcode_G28() {
//
// Restore state after probing
clean_up_after_endstop_or_probe_move();
if (!faux) clean_up_after_endstop_or_probe_move();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position);
@ -4890,8 +4917,366 @@ inline void gcode_G28() {
#endif // Z_PROBE_SLED
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* G33: Delta '4-point' auto calibration iteration
*
* Usage: G33 <Cn> <Vn>
*
* C (default) = Calibrate endstops, height and delta radius
*
* -2, 1-4: n x n probe points, default 3 x 3
*
* 1: probe center
* set height only - useful when z_offset is changed
* 2: probe center and towers
* solve one '4 point' calibration
* -2: probe center and opposite the towers
* solve one '4 point' calibration
* 3: probe 3 center points, towers and opposite-towers
* averages between 2 '4 point' calibrations
* 4: probe 4 center points, towers, opposite-towers and itermediate points
* averages between 4 '4 point' calibrations
*
* V Verbose level (0-3, default 1)
*
* 0: Dry-run mode: no calibration
* 1: Settings
* 2: Setting + probe results
* 3: Expert mode: setting + iteration factors (see Configuration_adv.h)
* This prematurely stops the iteration process when factors are found
*/
inline void gcode_G33() {
stepper.synchronize();
#if PLANNER_LEVELING
set_bed_leveling_enabled(false);
#endif
const int8_t pp = code_seen('C') ? code_value_int() : DELTA_CALIBRATION_DEFAULT_POINTS,
probe_points = (WITHIN(pp, 1, 4) || pp == -2) ? pp : DELTA_CALIBRATION_DEFAULT_POINTS;
int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
#define _MAX_M33_V 3
if (verbose_level == 3 && probe_points == 1) verbose_level--; // needs at least 4 points
#else
#define _MAX_M33_V 2
if (verbose_level > 2)
SERIAL_PROTOCOLLNPGM("Enable DELTA_CALIBRATE_EXPERT_MODE in Configuration_adv.h");
#endif
if (!WITHIN(verbose_level, 0, _MAX_M33_V)) verbose_level = 1;
float zero_std_dev = verbose_level ? 999.0 : 0.0; // 0.0 in dry-run mode : forced end
gcode_G28();
float e_old[XYZ],
dr_old = delta_radius,
zh_old = home_offset[Z_AXIS];
COPY(e_old,endstop_adj);
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
// expert variables
float h_f_old = 1.00, r_f_old = 0.00,
h_diff_min = 1.00, r_diff_max = 0.10;
#endif
// print settings
SERIAL_PROTOCOLLNPGM("G33 Auto Calibrate");
SERIAL_PROTOCOLPGM("Checking... AC");
if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)");
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
if (verbose_level == 3) SERIAL_PROTOCOLPGM(" (EXPERT)");
#endif
SERIAL_EOL;
LCD_MESSAGEPGM("Checking... AC");
SERIAL_PROTOCOLPAIR("Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
if (abs(probe_points) > 1) {
SERIAL_PROTOCOLPGM(" Ex:");
if (endstop_adj[A_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[A_AXIS], 2);
SERIAL_PROTOCOLPGM(" Ey:");
if (endstop_adj[B_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[B_AXIS], 2);
SERIAL_PROTOCOLPGM(" Ez:");
if (endstop_adj[C_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[C_AXIS], 2);
SERIAL_PROTOCOLPAIR(" Radius:", delta_radius);
}
SERIAL_EOL;
#if ENABLED(Z_PROBE_SLED)
DEPLOY_PROBE();
#endif
float test_precision;
int8_t iterations = 0;
do { // start iterations
setup_for_endstop_or_probe_move();
test_precision =
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
// Expert mode : forced end at std_dev < 0.1
(verbose_level == 3 && zero_std_dev < 0.1) ? 0.0 :
#endif
zero_std_dev
;
float z_at_pt[13] = { 0 };
iterations++;
// probe the points
int16_t center_points = 0;
if (probe_points != 3) {
z_at_pt[0] += probe_pt(0.0, 0.0 , true, 1);
center_points = 1;
}
int16_t step_axis = 4;
if (probe_points >= 3) {
for (int8_t axis = 9; axis > 0; axis -= step_axis) { // uint8_t starts endless loop
z_at_pt[0] += probe_pt(
0.1 * cos(RADIANS(180 + 30 * axis)) * (DELTA_CALIBRATION_RADIUS),
0.1 * sin(RADIANS(180 + 30 * axis)) * (DELTA_CALIBRATION_RADIUS), true, 1);
}
center_points += 3;
z_at_pt[0] /= center_points;
}
float S1 = z_at_pt[0], S2 = sq(S1);
int16_t N = 1, start = (probe_points == -2) ? 3 : 1;
step_axis = (abs(probe_points) == 2) ? 4 : (probe_points == 3) ? 2 : 1;
if (probe_points != 1) {
for (uint8_t axis = start; axis < 13; axis += step_axis)
z_at_pt[axis] += probe_pt(
cos(RADIANS(180 + 30 * axis)) * (DELTA_CALIBRATION_RADIUS),
sin(RADIANS(180 + 30 * axis)) * (DELTA_CALIBRATION_RADIUS), true, 1
);
if (probe_points == 4) step_axis = 2;
}
for (uint8_t axis = start; axis < 13; axis += step_axis) {
if (probe_points == 4)
z_at_pt[axis] = (z_at_pt[axis] + (z_at_pt[axis + 1] + z_at_pt[(axis + 10) % 12 + 1]) / 2.0) / 2.0;
S1 += z_at_pt[axis];
S2 += sq(z_at_pt[axis]);
N++;
}
zero_std_dev = round(sqrt(S2 / N) * 1000.0) / 1000.0 + 0.00001; // deviation from zero plane
// Solve matrices
if (zero_std_dev < test_precision) {
COPY(e_old, endstop_adj);
dr_old = delta_radius;
zh_old = home_offset[Z_AXIS];
float e_delta[XYZ] = { 0.0 }, r_delta = 0.0;
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
float h_f_new = 0.0, r_f_new = 0.0 , t_f_new = 0.0,
h_diff = 0.00, r_diff = 0.00;
#endif
#define ZP(N,I) ((N) * z_at_pt[I])
#define Z1000(I) ZP(1.00, I)
#define Z1050(I) ZP(H_FACTOR, I)
#define Z0700(I) ZP((H_FACTOR) * 2.0 / 3.00, I)
#define Z0350(I) ZP((H_FACTOR) / 3.00, I)
#define Z0175(I) ZP((H_FACTOR) / 6.00, I)
#define Z2250(I) ZP(R_FACTOR, I)
#define Z0750(I) ZP((R_FACTOR) / 3.00, I)
#define Z0375(I) ZP((R_FACTOR) / 6.00, I)
switch (probe_points) {
case 1:
LOOP_XYZ(i) e_delta[i] = Z1000(0);
r_delta = 0.00;
break;
case 2:
e_delta[X_AXIS] = Z1050(0) + Z0700(1) - Z0350(5) - Z0350(9);
e_delta[Y_AXIS] = Z1050(0) - Z0350(1) + Z0700(5) - Z0350(9);
e_delta[Z_AXIS] = Z1050(0) - Z0350(1) - Z0350(5) + Z0700(9);
r_delta = Z2250(0) - Z0750(1) - Z0750(5) - Z0750(9);
break;
case -2:
e_delta[X_AXIS] = Z1050(0) - Z0700(7) + Z0350(11) + Z0350(3);
e_delta[Y_AXIS] = Z1050(0) + Z0350(7) - Z0700(11) + Z0350(3);
e_delta[Z_AXIS] = Z1050(0) + Z0350(7) + Z0350(11) - Z0700(3);
r_delta = Z2250(0) - Z0750(7) - Z0750(11) - Z0750(3);
break;
default:
e_delta[X_AXIS] = Z1050(0) + Z0350(1) - Z0175(5) - Z0175(9) - Z0350(7) + Z0175(11) + Z0175(3);
e_delta[Y_AXIS] = Z1050(0) - Z0175(1) + Z0350(5) - Z0175(9) + Z0175(7) - Z0350(11) + Z0175(3);
e_delta[Z_AXIS] = Z1050(0) - Z0175(1) - Z0175(5) + Z0350(9) + Z0175(7) + Z0175(11) - Z0350(3);
r_delta = Z2250(0) - Z0375(1) - Z0375(5) - Z0375(9) - Z0375(7) - Z0375(11) - Z0375(3);
break;
}
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
// Calculate h & r factors
if (verbose_level == 3) {
LOOP_XYZ(axis) h_f_new += e_delta[axis] / 3;
r_f_new = r_delta;
h_diff = (1.0 / H_FACTOR) * (h_f_old - h_f_new) / h_f_old;
if (h_diff < h_diff_min && h_diff > 0.9) h_diff_min = h_diff;
if (r_f_old != 0)
r_diff = ( 0.0301 * sq(R_FACTOR) * R_FACTOR
+ 0.311 * sq(R_FACTOR)
+ 1.1493 * R_FACTOR
+ 1.7952
) * (r_f_old - r_f_new) / r_f_old;
if (r_diff > r_diff_max && r_diff < 0.4444) r_diff_max = r_diff;
SERIAL_EOL;
h_f_old = h_f_new;
r_f_old = r_f_new;
}
#endif // DELTA_CALIBRATE_EXPERT_MODE
// Adjust delta_height and endstops by the max amount
LOOP_XYZ(axis) endstop_adj[axis] += e_delta[axis];
delta_radius += r_delta;
const float z_temp = MAX3(endstop_adj[0], endstop_adj[1], endstop_adj[2]);
home_offset[Z_AXIS] -= z_temp;
LOOP_XYZ(i) endstop_adj[i] -= z_temp;
recalc_delta_settings(delta_radius, delta_diagonal_rod);
}
else { // !iterate
// step one back
COPY(endstop_adj, e_old);
delta_radius = dr_old;
home_offset[Z_AXIS] = zh_old;
recalc_delta_settings(delta_radius, delta_diagonal_rod);
}
// print report
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
if (verbose_level == 3) {
const float r_factor = 22.902 * sq(r_diff_max) * r_diff_max
- 44.988 * sq(r_diff_max)
+ 31.697 * r_diff_max
- 9.4439;
SERIAL_PROTOCOLPAIR("h_factor:", 1.0 / h_diff_min);
SERIAL_PROTOCOLPAIR(" r_factor:", r_factor);
SERIAL_EOL;
}
#endif
if (verbose_level == 2) {
SERIAL_PROTOCOLPGM(". c:");
if (z_at_pt[0] > 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[0], 2);
if (probe_points > 1) {
SERIAL_PROTOCOLPGM(" x:");
if (z_at_pt[1] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[1], 2);
SERIAL_PROTOCOLPGM(" y:");
if (z_at_pt[5] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[5], 2);
SERIAL_PROTOCOLPGM(" z:");
if (z_at_pt[9] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[9], 2);
}
if (probe_points > 0) SERIAL_EOL;
if (probe_points > 2 || probe_points == -2) {
if (probe_points > 2) SERIAL_PROTOCOLPGM(". ");
SERIAL_PROTOCOLPGM(" yz:");
if (z_at_pt[7] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[7], 2);
SERIAL_PROTOCOLPGM(" zx:");
if (z_at_pt[11] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[11], 2);
SERIAL_PROTOCOLPGM(" xy:");
if (z_at_pt[3] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(z_at_pt[3], 2);
SERIAL_EOL;
}
}
if (test_precision != 0.0) { // !forced end
if (zero_std_dev >= test_precision) {
SERIAL_PROTOCOLPGM("Calibration OK");
SERIAL_PROTOCOLLNPGM(" rolling back 1");
LCD_MESSAGEPGM("Calibration OK");
SERIAL_EOL;
}
else { // !end iterations
char mess[15] = "No convergence";
if (iterations < 31)
sprintf_P(mess, PSTR("Iteration : %02i"), (int)iterations);
SERIAL_PROTOCOL(mess);
SERIAL_PROTOCOLPGM(" std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
SERIAL_EOL;
lcd_setstatus(mess);
}
SERIAL_PROTOCOLPAIR("Height:", DELTA_HEIGHT + home_offset[Z_AXIS]);
if (abs(probe_points) > 1) {
SERIAL_PROTOCOLPGM(" Ex:");
if (endstop_adj[A_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[A_AXIS], 2);
SERIAL_PROTOCOLPGM(" Ey:");
if (endstop_adj[B_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[B_AXIS], 2);
SERIAL_PROTOCOLPGM(" Ez:");
if (endstop_adj[C_AXIS] >= 0) SERIAL_CHAR('+');
SERIAL_PROTOCOL_F(endstop_adj[C_AXIS], 2);
SERIAL_PROTOCOLPAIR(" Radius:", delta_radius);
}
SERIAL_EOL;
if (zero_std_dev >= test_precision)
SERIAL_PROTOCOLLNPGM("Save with M500");
}
else { // forced end
#if ENABLED(DELTA_CALIBRATE_EXPERT_MODE)
if (verbose_level == 3)
SERIAL_PROTOCOLLNPGM("Copy to Configuration_adv.h");
else
#endif
{
SERIAL_PROTOCOLPGM("End DRY-RUN std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
SERIAL_EOL;
}
}
clean_up_after_endstop_or_probe_move();
stepper.synchronize();
gcode_G28();
} while (zero_std_dev < test_precision && iterations < 31);
#if ENABLED(Z_PROBE_SLED)
RETRACT_PROBE();
#endif
}
#endif // DELTA_AUTO_CALIBRATION
#endif // HAS_BED_PROBE
#if ENABLED(G38_PROBE_TARGET)
static bool G38_run_probe() {
@ -4996,7 +5381,7 @@ inline void gcode_G92() {
current_position[i] = code_value_axis_units(i);
if (i != E_AXIS) didXYZ = true;
#else
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_POSITION_SHIFT
float p = current_position[i];
#endif
float v = code_value_axis_units(i);
@ -5005,7 +5390,7 @@ inline void gcode_G92() {
if (i != E_AXIS) {
didXYZ = true;
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_POSITION_SHIFT
position_shift[i] += v - p; // Offset the coordinate space
update_software_endstops((AxisEnum)i);
#endif
@ -5620,7 +6005,7 @@ inline void gcode_M42() {
if (axis_unhomed_error(true, true, true)) return;
int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
const int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
if (!WITHIN(verbose_level, 0, 4)) {
SERIAL_PROTOCOLLNPGM("?Verbose Level not plausible (0-4).");
return;
@ -7012,7 +7397,7 @@ inline void gcode_M205() {
if (code_seen('E')) planner.max_jerk[E_AXIS] = code_value_axis_units(E_AXIS);
}
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
/**
* M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y
@ -7031,12 +7416,13 @@ inline void gcode_M205() {
report_current_position();
}
#endif // NO_WORKSPACE_OFFSETS
#endif // HAS_M206_COMMAND
#if ENABLED(DELTA)
/**
* M665: Set delta configurations
*
* H = diagonal rod // AC-version
* L = diagonal rod
* R = delta radius
* S = segments per second
@ -7045,6 +7431,12 @@ inline void gcode_M205() {
* C = Gamma (Tower 3) diagonal rod trim
*/
inline void gcode_M665() {
if (code_seen('H')) {
home_offset[Z_AXIS] = code_value_linear_units() - DELTA_HEIGHT;
current_position[Z_AXIS] += code_value_linear_units() - DELTA_HEIGHT - home_offset[Z_AXIS];
home_offset[Z_AXIS] = code_value_linear_units() - DELTA_HEIGHT;
update_software_endstops(Z_AXIS);
}
if (code_seen('L')) delta_diagonal_rod = code_value_linear_units();
if (code_seen('R')) delta_radius = code_value_linear_units();
if (code_seen('S')) delta_segments_per_second = code_value_float();
@ -7903,7 +8295,7 @@ void quickstop_stepper() {
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
/**
* M428: Set home_offset based on the distance between the
@ -7945,7 +8337,7 @@ void quickstop_stepper() {
}
}
#endif // NO_WORKSPACE_OFFSETS
#endif // HAS_M206_COMMAND
/**
* M500: Store settings in EEPROM
@ -8924,9 +9316,9 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
// The newly-selected extruder XY is actually at...
current_position[X_AXIS] += xydiff[X_AXIS];
current_position[Y_AXIS] += xydiff[Y_AXIS];
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE)
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
for (uint8_t i = X_AXIS; i <= Y_AXIS; i++) {
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_POSITION_SHIFT
position_shift[i] += xydiff[i];
#endif
update_software_endstops((AxisEnum)i);
@ -9192,6 +9584,15 @@ void process_next_command() {
break;
#endif // Z_PROBE_SLED
#if ENABLED(DELTA_AUTO_CALIBRATION)
case 33: // G33: Delta Auto Calibrate
gcode_G33();
break;
#endif // DELTA_AUTO_CALIBRATION
#endif // HAS_BED_PROBE
#if ENABLED(G38_PROBE_TARGET)
@ -9509,7 +9910,7 @@ void process_next_command() {
gcode_M205();
break;
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
case 206: // M206: Set home offsets
gcode_M206();
break;
@ -9677,7 +10078,7 @@ void process_next_command() {
break;
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
case 428: // M428: Apply current_position to home_offset
gcode_M428();
break;
@ -10198,8 +10599,8 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
* splitting the move where it crosses mesh borders.
*/
void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) {
int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)),
cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)),
int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X)),
cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y)),
cx2 = mbl.cell_index_x(RAW_X_POSITION(destination[X_AXIS])),
cy2 = mbl.cell_index_y(RAW_Y_POSITION(destination[Y_AXIS]));
NOMORE(cx1, GRID_MAX_POINTS_X - 2);
@ -11043,6 +11444,9 @@ void disable_all_steppers() {
#if ENABLED(E3_IS_TMC2130)
automatic_current_control(stepperE3);
#endif
#if ENABLED(E4_IS_TMC2130)
automatic_current_control(stepperE4);
#endif
}
}
@ -11410,7 +11814,7 @@ void setup() {
// This also updates variables in the planner, elsewhere
(void)settings.load();
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
// Initialize current position based on home_offset
COPY(current_position, home_offset);
#else

47
Marlin/configuration_store.cpp
View File

@ -47,7 +47,7 @@
* 100 Version (char x4)
* 104 EEPROM Checksum (uint16_t)
*
* 106 E_STEPPERS (uint8_t)
* 106 E_STEPPERS (uint8_t)
* 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8)
* 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x8)
* 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8)
@ -202,7 +202,7 @@ void MarlinSettings::postprocess() {
calculate_volumetric_multipliers();
#if DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA)
#if HAS_HOME_OFFSET || ENABLED(DUAL_X_CARRIAGE)
// Software endstops depend on home_offset
LOOP_XYZ(i) update_software_endstops((AxisEnum)i);
#endif
@ -299,10 +299,18 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(planner.min_travel_feedrate_mm_s);
EEPROM_WRITE(planner.min_segment_time);
EEPROM_WRITE(planner.max_jerk);
#if ENABLED(NO_WORKSPACE_OFFSETS)
float home_offset[XYZ] = { 0 };
#if !HAS_HOME_OFFSET
const float home_offset[XYZ] = { 0 };
#endif
#if ENABLED(DELTA)
dummy = 0.0;
EEPROM_WRITE(dummy);
EEPROM_WRITE(dummy);
dummy = DELTA_HEIGHT + home_offset[Z_AXIS];
EEPROM_WRITE(dummy);
#else
EEPROM_WRITE(home_offset);
#endif
EEPROM_WRITE(home_offset);
#if HOTENDS > 1
// Skip hotend 0 which must be 0
@ -488,7 +496,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy);
}
// Save TCM2130 Configuration, and placeholder values
// Save TMC2130 Configuration, and placeholder values
uint16_t val;
#if ENABLED(HAVE_TMC2130)
#if ENABLED(X_IS_TMC2130)
@ -551,6 +559,12 @@ void MarlinSettings::postprocess() {
val = 0;
#endif
EEPROM_WRITE(val);
#if ENABLED(E4_IS_TMC2130)
val = stepperE4.getCurrent();
#else
val = 0;
#endif
EEPROM_WRITE(val);
#else
val = 0;
for (uint8_t q = 0; q < 11; ++q) EEPROM_WRITE(val);
@ -639,11 +653,17 @@ void MarlinSettings::postprocess() {
EEPROM_READ(planner.min_segment_time);
EEPROM_READ(planner.max_jerk);
#if ENABLED(NO_WORKSPACE_OFFSETS)
#if !HAS_HOME_OFFSET
float home_offset[XYZ];
#endif
EEPROM_READ(home_offset);
#if ENABLED(DELTA)
home_offset[X_AXIS] = 0.0;
home_offset[Y_AXIS] = 0.0;
home_offset[Z_AXIS] -= DELTA_HEIGHT;
#endif
#if HOTENDS > 1
// Skip hotend 0 which must be 0
for (uint8_t e = 1; e < HOTENDS; e++)
@ -979,7 +999,7 @@ void MarlinSettings::reset() {
planner.z_fade_height = 0.0;
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_HOME_OFFSET
ZERO(home_offset);
#endif
@ -1019,7 +1039,10 @@ void MarlinSettings::reset() {
delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
COPY(delta_diagonal_rod_trim, drt);
COPY(delta_tower_angle_trim, dta);
home_offset[Z_AXIS] = 0;
#elif ENABLED(Z_DUAL_ENDSTOPS)
float z_endstop_adj =
#ifdef Z_DUAL_ENDSTOPS_ADJUSTMENT
Z_DUAL_ENDSTOPS_ADJUSTMENT
@ -1027,6 +1050,7 @@ void MarlinSettings::reset() {
0
#endif
;
#endif
#if ENABLED(ULTIPANEL)
@ -1143,7 +1167,7 @@ void MarlinSettings::reset() {
/**
* M503 - Report current settings in RAM
*
*
* Unless specifically disabled, M503 is available even without EEPROM
*/
void MarlinSettings::report(bool forReplay) {
@ -1231,7 +1255,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOPAIR(" E", planner.max_jerk[E_AXIS]);
SERIAL_EOL;
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Home offset (mm)");
@ -1346,11 +1370,12 @@ void MarlinSettings::reset() {
SERIAL_EOL;
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Delta settings: L=diagonal rod, R=radius, S=segments-per-second, ABC=diagonal rod trim, IJK=tower angle trim");
SERIAL_ECHOLNPGM("Delta settings: L=diagonal_rod, R=radius, H=height, S=segments_per_second, ABC=diagonal_rod_trim_tower_[123]");
CONFIG_ECHO_START;
}
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod);
SERIAL_ECHOPAIR(" R", delta_radius);
SERIAL_ECHOPAIR(" H", DELTA_HEIGHT + home_offset[Z_AXIS]);
SERIAL_ECHOPAIR(" S", delta_segments_per_second);
SERIAL_ECHOPAIR(" A", delta_diagonal_rod_trim[A_AXIS]);
SERIAL_ECHOPAIR(" B", delta_diagonal_rod_trim[B_AXIS]);

4
Marlin/example_configurations/Cartesio/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/Felix/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/Felix/DUAL/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

4
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -658,7 +658,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/K8200/Configuration.h
View File

@ -86,8 +86,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -687,7 +687,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/K8400/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/K8400/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

4
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

4
Marlin/example_configurations/RigidBot/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/TAZ4/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -682,7 +682,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/TinyBoy2/Configuration.h
View File

@ -86,8 +86,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

6
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
View File

@ -677,7 +677,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@
#endif // ENABLED(HAVE_TMC2130)
// @section L6470
/**
* Enable this section if you have L6470 motor drivers.
* You need to import the L6470 library into the Arduino IDE for this.
* (https://github.com/ameyer/Arduino-L6470)
*/
// @section l6470
//#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)

4
Marlin/example_configurations/WITBOX/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

1743
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

1137
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h Normal file
View File

File diff suppressed because it is too large Load Diff

20
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h → Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================
@ -463,16 +463,24 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 280 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 85.0
// Delta calibration menu
// uncomment to add three points calibration menu option.
// See http://minow.blogspot.com/index.html#4918805519571907051
// If needed, adjust the X, Y, Z calibration coordinates
// in ultralcd.cpp@lcd_delta_calibrate_menu()
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
//#define DELTA_HOME_TO_SAFE_ZONE
@ -1080,7 +1088,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS (286.5 - 6.5) // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

19
Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h → Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -431,6 +431,25 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================

18
Marlin/example_configurations/delta/generic/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================
@ -453,6 +453,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 250 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0
@ -460,6 +463,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1067,7 +1077,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

7
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -439,12 +439,13 @@
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
@ -694,7 +695,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

18
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================
@ -453,6 +453,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 250 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 90.0
@ -460,6 +463,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1063,7 +1073,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 250 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

7
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -439,12 +439,13 @@
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 with different values (C2, C-2).
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* If R_FACTOR is too low accuracy is reduced. Too high reduces iteration speed.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
@ -694,7 +695,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

18
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -74,8 +74,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================
@ -440,6 +440,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET))
// height from z=0.00 to home position
#define DELTA_HEIGHT 277 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 127.0
@ -447,6 +450,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1071,7 +1081,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 277 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

22
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -436,6 +436,26 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================
@ -681,7 +701,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

18
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================
@ -458,6 +458,9 @@
// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET) + 1)
// height from z=0.00 to home position
#define DELTA_HEIGHT 380 // get this value from auto calibrate
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
#define DELTA_PRINTABLE_RADIUS 140.0
@ -465,6 +468,13 @@
// See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU
// G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
//#define DELTA_AUTO_CALIBRATION
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define DELTA_CALIBRATION_DEFAULT_POINTS 3 // set the default number of probe points : n*n (1-4)
#define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - 15) // set the radius for the calibration probe points
#endif
// After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE
@ -1078,7 +1088,7 @@
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 381.4 // Distance between the nozzle to printbed after homing
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
//

23
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -431,6 +431,25 @@
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
#if ENABLED(DELTA_AUTO_CALIBRATION)
/**
* Set the height short (H-10) with M665 Hx.xx.
* Set the delta_radius offset (R-5, R-10, R+5, R+10) with M665 Rx.xx.
* Run G33 Cx V3 (C2, C-2) with different values for C and R
* Take the average for R_FACTOR and maximum for H_FACTOR.
* Run the tests with default values!!!
*/
//#define DELTA_CALIBRATE_EXPERT_MODE
// Remove the comments of the folling 2 lines to overide default values
//#define H_FACTOR 1.02 // 1.0 < H_FACTOR < 1.11, default 1.00
//#define R_FACTOR -3.95 // -6.7 < R_FACTOR < -2.25, default -2.25
#endif
//===========================================================================
//=============================Additional Features===========================
//===========================================================================
@ -676,7 +695,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/makibox/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

2
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -674,7 +674,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

4
Marlin/example_configurations/wt150/Configuration.h
View File

@ -70,8 +70,8 @@
//===========================================================================
//============================= DELTA Printer ===============================
//===========================================================================
// For a Delta printer replace the configuration files with the files in the
// example_configurations/delta directory.
// For Delta printers start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine.
//
//===========================================================================

6
Marlin/example_configurations/wt150/Configuration_adv.h
View File

@ -677,7 +677,7 @@
//#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
@ -971,14 +971,14 @@
#endif // ENABLED(HAVE_TMC2130)
// @section L6470
/**
* Enable this section if you have L6470 motor drivers.
* You need to import the L6470 library into the Arduino IDE for this.
* (https://github.com/ameyer/Arduino-L6470)
*/
// @section l6470
//#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)

6
Marlin/language_en.h
View File

@ -498,6 +498,12 @@
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif
#ifndef MSG_DELTA_AUTO_CALIBRATE
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
#endif
#ifndef MSG_DELTA_HEIGHT_CALIBRATE
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
#endif
#ifndef MSG_INFO_MENU
#define MSG_INFO_MENU _UxGT("About Printer")
#endif

18
Marlin/ultralcd.cpp
View File

@ -817,7 +817,7 @@ void kill_screen(const char* lcd_msg) {
*
*/
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
/**
* Set the home offset based on the current_position
*/
@ -1672,7 +1672,7 @@ void kill_screen(const char* lcd_msg) {
#endif
#if DISABLED(NO_WORKSPACE_OFFSETS)
#if HAS_M206_COMMAND
//
// Set Home Offsets
//
@ -1770,14 +1770,20 @@ void kill_screen(const char* lcd_msg) {
lcd_goto_screen(_lcd_calibrate_homing);
}
#if ENABLED(DELTA_AUTO_CALIBRATION)
#define _DELTA_TOWER_MOVE_RADIUS DELTA_CALIBRATION_RADIUS
#else
#define _DELTA_TOWER_MOVE_RADIUS DELTA_PRINTABLE_RADIUS
#endif
// Move directly to the tower position with uninterpolated moves
// If we used interpolated moves it would cause this to become re-entrant
void _goto_tower_pos(const float &a) {
current_position[Z_AXIS] = max(Z_HOMING_HEIGHT, Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5;
line_to_current(Z_AXIS);
current_position[X_AXIS] = a < 0 ? X_HOME_POS : sin(a) * -(DELTA_PRINTABLE_RADIUS);
current_position[Y_AXIS] = a < 0 ? Y_HOME_POS : cos(a) * (DELTA_PRINTABLE_RADIUS);
current_position[X_AXIS] = a < 0 ? LOGICAL_X_POSITION(X_HOME_POS) : sin(a) * -(_DELTA_TOWER_MOVE_RADIUS);
current_position[Y_AXIS] = a < 0 ? LOGICAL_Y_POSITION(Y_HOME_POS) : cos(a) * (_DELTA_TOWER_MOVE_RADIUS);
line_to_current(Z_AXIS);
current_position[Z_AXIS] = 4.0;
@ -1797,6 +1803,10 @@ void kill_screen(const char* lcd_msg) {
void lcd_delta_calibrate_menu() {
START_MENU();
MENU_BACK(MSG_MAIN);
#if ENABLED(DELTA_AUTO_CALIBRATION)
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33 C"));
MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 C1"));
#endif
MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
if (axis_homed[Z_AXIS]) {
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x);

25
buildroot/share/git/firstpush
View File

@ -1,3 +1,26 @@
#!/usr/bin/env bash
#
# firstpush
#
# Push a branch to 'origin' and open the
# commit log to watch Travis CI progress.
#
git push --set-upstream origin `git branch | grep \* | sed 's/\* //g'`
MFINFO=$(mfinfo) || exit
IFS=' ' read -a INFO <<< "$MFINFO"
FORK=${INFO[1]}
REPO=${INFO[2]}
BRANCH=${INFO[4]}
git push --set-upstream origin $BRANCH
TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }')
URL="https://github.com/$FORK/$REPO/commits/$BRANCH"
if [ -z "$TOOL" ]; then
echo "Can't find a tool to open the URL:"
echo $URL
else
echo "Viewing commits on $BRANCH..."
"$TOOL" "$URL"
fi