Rename cell index vars

This commit is contained in:
Scott Lahteine 2016-07-16 19:11:56 -07:00
parent 697373b071
commit d0009e013b

View File

@ -7842,16 +7842,16 @@ void clamp_to_software_endstops(float target[3]) {
// This function is used to split lines on mesh borders so each segment is only part of one mesh area // This function is used to split lines on mesh borders so each segment is only part of one mesh area
void mesh_buffer_line(float x, float y, float z, const float e, float fr_mm_s, const uint8_t& extruder, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) { void mesh_buffer_line(float x, float y, float z, const float e, float fr_mm_s, const uint8_t& extruder, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) {
int pcx = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)), int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)),
pcy = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)), cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)),
cx = mbl.cell_index_x(RAW_POSITION(x, X_AXIS)), cx2 = mbl.cell_index_x(RAW_POSITION(x, X_AXIS)),
cy = mbl.cell_index_y(RAW_POSITION(y, Y_AXIS)); cy2 = mbl.cell_index_y(RAW_POSITION(y, Y_AXIS));
NOMORE(pcx, MESH_NUM_X_POINTS - 2); NOMORE(cx1, MESH_NUM_X_POINTS - 2);
NOMORE(pcy, MESH_NUM_Y_POINTS - 2); NOMORE(cy1, MESH_NUM_Y_POINTS - 2);
NOMORE(cx, MESH_NUM_X_POINTS - 2); NOMORE(cx2, MESH_NUM_X_POINTS - 2);
NOMORE(cy, MESH_NUM_Y_POINTS - 2); NOMORE(cy2, MESH_NUM_Y_POINTS - 2);
if (pcx == cx && pcy == cy) { if (cx1 == cx2 && cy1 == cy2) {
// Start and end on same mesh square // Start and end on same mesh square
planner.buffer_line(x, y, z, e, fr_mm_s, extruder); planner.buffer_line(x, y, z, e, fr_mm_s, extruder);
set_current_to_destination(); set_current_to_destination();
@ -7859,8 +7859,8 @@ void mesh_buffer_line(float x, float y, float z, const float e, float fr_mm_s, c
} }
float nx, ny, nz, ne, normalized_dist; float nx, ny, nz, ne, normalized_dist;
int8_t gcx = max(pcx, cx), gcy = max(pcy, cy); int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2);
if (cx != pcx && TEST(x_splits, gcx)) { if (cx2 != cx1 && TEST(x_splits, gcx)) {
nx = mbl.get_probe_x(gcx) + home_offset[X_AXIS] + position_shift[X_AXIS]; nx = mbl.get_probe_x(gcx) + home_offset[X_AXIS] + position_shift[X_AXIS];
normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]); normalized_dist = (nx - current_position[X_AXIS]) / (x - current_position[X_AXIS]);
ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist; ny = current_position[Y_AXIS] + (y - current_position[Y_AXIS]) * normalized_dist;
@ -7868,7 +7868,7 @@ void mesh_buffer_line(float x, float y, float z, const float e, float fr_mm_s, c
ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist; ne = current_position[E_AXIS] + (e - current_position[E_AXIS]) * normalized_dist;
CBI(x_splits, gcx); CBI(x_splits, gcx);
} }
else if (cy != pcy && TEST(y_splits, gcy)) { else if (cy2 != cy1 && TEST(y_splits, gcy)) {
ny = mbl.get_probe_y(gcy) + home_offset[Y_AXIS] + position_shift[Y_AXIS]; ny = mbl.get_probe_y(gcy) + home_offset[Y_AXIS] + position_shift[Y_AXIS];
normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]); normalized_dist = (ny - current_position[Y_AXIS]) / (y - current_position[Y_AXIS]);
nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist; nx = current_position[X_AXIS] + (x - current_position[X_AXIS]) * normalized_dist;