diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 2bf87fd9a..37ccd983c 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2763,6 +2763,57 @@ inline void gcode_G4() {
   }
 #endif
 
+#if ENABLED(QUICK_HOME)
+
+  static void quick_home_xy() {
+
+    current_position[X_AXIS] = current_position[Y_AXIS] = 0;
+
+    #if ENABLED(DUAL_X_CARRIAGE)
+      int x_axis_home_dir = x_home_dir(active_extruder);
+      extruder_duplication_enabled = false;
+    #else
+      int x_axis_home_dir = home_dir(X_AXIS);
+    #endif
+
+    SYNC_PLAN_POSITION_KINEMATIC();
+
+    float mlx = max_length(X_AXIS), mly = max_length(Y_AXIS),
+          mlratio = mlx > mly ? mly / mlx : mlx / mly;
+
+    destination[X_AXIS] = 1.5 * mlx * x_axis_home_dir;
+    destination[Y_AXIS] = 1.5 * mly * home_dir(Y_AXIS);
+    feedrate = min(homing_feedrate[X_AXIS], homing_feedrate[Y_AXIS]) * sqrt(mlratio * mlratio + 1);
+    line_to_destination();
+    stepper.synchronize();
+
+    set_axis_is_at_home(X_AXIS);
+    set_axis_is_at_home(Y_AXIS);
+    SYNC_PLAN_POSITION_KINEMATIC();
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 1", current_position);
+    #endif
+
+    destination[X_AXIS] = current_position[X_AXIS];
+    destination[Y_AXIS] = current_position[Y_AXIS];
+    line_to_destination();
+    stepper.synchronize();
+    endstops.hit_on_purpose(); // clear endstop hit flags
+
+    current_position[X_AXIS] = destination[X_AXIS];
+    current_position[Y_AXIS] = destination[Y_AXIS];
+    #if DISABLED(SCARA)
+      current_position[Z_AXIS] = destination[Z_AXIS];
+    #endif
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 2", current_position);
+    #endif
+  }
+
+#endif // QUICK_HOME
+
 /**
  * G28: Home all axes according to settings
  *
@@ -2814,16 +2865,9 @@ inline void gcode_G28() {
 
   setup_for_endstop_move();
 
-  /**
-   * Directly after a reset this is all 0. Later we get a hint if we have
-   * to raise z or not.
-   */
-  set_destination_to_current();
-
   #if ENABLED(DELTA)
     /**
-     * A delta can only safely home all axis at the same time
-     * all axis have to home at the same time
+     * A delta can only safely home all axes at the same time
      */
 
     // Pretend the current position is 0,0,0
@@ -2894,67 +2938,29 @@ inline void gcode_G28() {
 
     #if ENABLED(QUICK_HOME)
 
-      if (home_all_axis || (homeX && homeY)) {  // First diagonal move
+      bool quick_homed = home_all_axis || (homeX && homeY);
+      if (quick_homed) quick_home_xy();
 
-        current_position[X_AXIS] = current_position[Y_AXIS] = 0;
+    #else
 
-        #if ENABLED(DUAL_X_CARRIAGE)
-          int x_axis_home_dir = x_home_dir(active_extruder);
-          extruder_duplication_enabled = false;
-        #else
-          int x_axis_home_dir = home_dir(X_AXIS);
-        #endif
+      const bool quick_homed = false;
 
-        SYNC_PLAN_POSITION_KINEMATIC();
-
-        float mlx = max_length(X_AXIS), mly = max_length(Y_AXIS),
-              mlratio = mlx > mly ? mly / mlx : mlx / mly;
-
-        destination[X_AXIS] = 1.5 * mlx * x_axis_home_dir;
-        destination[Y_AXIS] = 1.5 * mly * home_dir(Y_AXIS);
-        feedrate = min(homing_feedrate[X_AXIS], homing_feedrate[Y_AXIS]) * sqrt(mlratio * mlratio + 1);
-        line_to_destination();
-        stepper.synchronize();
-
-        set_axis_is_at_home(X_AXIS);
-        set_axis_is_at_home(Y_AXIS);
-        SYNC_PLAN_POSITION_KINEMATIC();
-
-        #if ENABLED(DEBUG_LEVELING_FEATURE)
-          if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 1", current_position);
-        #endif
-
-        destination[X_AXIS] = current_position[X_AXIS];
-        destination[Y_AXIS] = current_position[Y_AXIS];
-        line_to_destination();
-        stepper.synchronize();
-        endstops.hit_on_purpose(); // clear endstop hit flags
-
-        current_position[X_AXIS] = destination[X_AXIS];
-        current_position[Y_AXIS] = destination[Y_AXIS];
-        #if DISABLED(SCARA)
-          current_position[Z_AXIS] = destination[Z_AXIS];
-        #endif
-
-        #if ENABLED(DEBUG_LEVELING_FEATURE)
-          if (DEBUGGING(LEVELING)) DEBUG_POS("> QUICK_HOME 2", current_position);
-        #endif
-      }
-
-    #endif // QUICK_HOME
+    #endif
 
     #if ENABLED(HOME_Y_BEFORE_X)
+
       // Home Y
-      if (home_all_axis || homeY) {
+      if (!quick_homed && (home_all_axis || homeY)) {
         HOMEAXIS(Y);
         #if ENABLED(DEBUG_LEVELING_FEATURE)
           if (DEBUGGING(LEVELING)) DEBUG_POS("> homeY", current_position);
         #endif
       }
+
     #endif
 
     // Home X
-    if (home_all_axis || homeX) {
+    if (!quick_homed && (home_all_axis || homeX)) {
       #if ENABLED(DUAL_X_CARRIAGE)
         int tmp_extruder = active_extruder;
         extruder_duplication_enabled = false;
@@ -2977,7 +2983,7 @@ inline void gcode_G28() {
 
     #if DISABLED(HOME_Y_BEFORE_X)
       // Home Y
-      if (home_all_axis || homeY) {
+      if (!quick_homed && (home_all_axis || homeY)) {
         HOMEAXIS(Y);
         #if ENABLED(DEBUG_LEVELING_FEATURE)
           if (DEBUGGING(LEVELING)) DEBUG_POS("> homeY", current_position);