Added check for Delta printers in Mesh, #error not yet supported.

This commit is contained in:
Edward Patel 2015-04-06 23:03:06 +02:00
parent 9a093b2e8f
commit d27c82a450
11 changed files with 55 additions and 0 deletions

View File

@ -399,6 +399,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -417,6 +417,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -369,6 +369,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -392,6 +392,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -397,6 +397,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -421,6 +421,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -419,6 +419,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -389,6 +389,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10

View File

@ -391,6 +391,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#endif // MANUAL_BED_LEVELING
#ifdef MESH_BED_LEVELING
#ifdef DELTA
#error 'MESH_BED_LEVELING' does not yet support 'DELTA' printers
#endif
#define MESH_MIN_X 10
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
#define MESH_MIN_Y 10