diff --git a/.travis.yml b/.travis.yml
index ad6732017..302a2e47b 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -131,7 +131,12 @@ script:
   - opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
   - build_marlin
   #
-  # Test PROBE_MANUALLY feature, with LCD support,
+  # Test MINIRAMBO for PWM_MOTOR_CURRENT
+  #      PROBE_MANUALLY feature, with LCD support,
+  #      ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
+  #      PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
+  #      Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
+  #      ADVANCED_PAUSE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
   #      EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
   #      INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
   #
@@ -139,6 +144,12 @@ script:
   - opt_set MOTHERBOARD BOARD_MINIRAMBO
   - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
   - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
+  - opt_enable ULTIMAKERCONTROLLER SDSUPPORT
+  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
+  - opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
+  - opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
+  - opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
+  - opt_set_adv I2C_SLAVE_ADDRESS 63
   - build_marlin
   #
   # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
@@ -191,33 +202,29 @@ script:
   - opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
   - build_marlin
   #
-  # Test MINIRAMBO for PWM_MOTOR_CURRENT
-  #      ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
-  #      PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
-  #      Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
-  #      ADVANCED_PAUSE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
-  #
-  - restore_configs
-  - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
-  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
-  - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
-  - opt_set_adv I2C_SLAVE_ADDRESS 63
-  - opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
-  - opt_add_adv Z2_MIN_PIN 2
-  - build_marlin
-  #
   # Enable COREXY
   #
   - restore_configs
   - opt_enable COREXY
   - build_marlin
   #
-  # Enable COREYX (swapped)
-  #
-  #- restore_configs
-  #- opt_enable COREYX
-  #- build_marlin
+  # Test many less common options
   #
+  - restore_configs
+  - opt_enable COREYX
+  - opt_set_adv FAN_MIN_PWM 50
+  - opt_set_adv FAN_KICKSTART_TIME 100
+  - opt_set_adv XY_FREQUENCY_LIMIT  15
+  - opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER
+  - opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK
+  - opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
+  - opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
+  - opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
+  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
+  - opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
+  - opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
+  - opt_enable USE_XMAX_PLUG
+  - build_marlin
   #
   ######## Other Standard LCD/Panels ##############
   #
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 34a4016e9..65c5b9a6a 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -7790,7 +7790,6 @@ inline void gcode_M105() {
     if (p < FAN_COUNT) {
       #if ENABLED(EXTRA_FAN_SPEED)
         const int16_t t = parser.intval('T');
-        NOMORE(t, 255);
         if (t > 0) {
           switch (t) {
             case 1:
@@ -7801,7 +7800,7 @@ inline void gcode_M105() {
               fanSpeeds[p] = new_fanSpeeds[p];
               break;
             default:
-              new_fanSpeeds[p] = t;
+              new_fanSpeeds[p] = min(t, 255);
               break;
           }
           return;
@@ -9323,7 +9322,7 @@ inline void gcode_M226() {
           zprobe_zoffset += offs;
           refresh_zprobe_zoffset(); // This will babystep the axis
         #else
-          thermalManager.babystep_axis(Z_AXIS, parser.value_axis_units(Z_AXIS) * planner.axis_steps_per_mm[Z_AXIS]);
+          thermalManager.babystep_axis(Z_AXIS, offs * planner.axis_steps_per_mm[Z_AXIS]);
         #endif
       }
     #endif
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index ae31fe865..4b85aef4d 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -1746,15 +1746,15 @@ void Temperature::isr() {
 
       #if ENABLED(FAN_SOFT_PWM)
         #if HAS_FAN0
-          soft_pwm_count_fan[0] = (soft_pwm_count_fan[0] & pwm_mask) + soft_pwm_amount_fan[0] >> 1;
+          soft_pwm_count_fan[0] = ((soft_pwm_count_fan[0] & pwm_mask) + soft_pwm_amount_fan[0]) >> 1;
           WRITE_FAN(soft_pwm_count_fan[0] > pwm_mask ? HIGH : LOW);
         #endif
         #if HAS_FAN1
-          soft_pwm_count_fan[1] = (soft_pwm_count_fan[1] & pwm_mask) + soft_pwm_amount_fan[1] >> 1;
+          soft_pwm_count_fan[1] = ((soft_pwm_count_fan[1] & pwm_mask) + soft_pwm_amount_fan[1]) >> 1;
           WRITE_FAN1(soft_pwm_count_fan[1] > pwm_mask ? HIGH : LOW);
         #endif
         #if HAS_FAN2
-          soft_pwm_count_fan[2] = (soft_pwm_count_fan[2] & pwm_mask) + soft_pwm_amount_fan[2] >> 1;
+          soft_pwm_count_fan[2] = ((soft_pwm_count_fan[2] & pwm_mask) + soft_pwm_amount_fan[2]) >> 1;
           WRITE_FAN2(soft_pwm_count_fan[2] > pwm_mask ? HIGH : LOW);
         #endif
       #endif