MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add M420 C to center the mesh on a value (#10521)

Browse Source
This commit is contained in:
Scott Lahteine 2018-04-25 06:43:59 -05:00 committed by GitHub
parent 21f5ca6ad4
commit d429d5a4ae
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 89 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

93
Marlin/Marlin_main.cpp
View File

@ -9978,6 +9978,9 @@ void quickstop_stepper() {
}
#if HAS_LEVELING
//#define M420_C_USE_MEAN
/**
* M420: Enable/Disable Bed Leveling and/or set the Z fade height.
*
@ -9989,8 +9992,18 @@ void quickstop_stepper() {
*
* L[index] Load UBL mesh from index (0 is default)
* T[map] 0:Human-readable 1:CSV 2:"LCD" 4:Compact
*
* With mesh-based leveling only:
*
* C Center mesh on the mean of the lowest and highest
*/
inline void gcode_M420() {
const bool seen_S = parser.seen('S');
bool to_enable = seen_S ? parser.value_bool() : planner.leveling_active;
// If disabling leveling do it right away
// (Don't disable for just M420 or M420 V)
if (seen_S && !to_enable) set_bed_leveling_enabled(false);
const float oldpos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] };
@ -9999,6 +10012,8 @@ void quickstop_stepper() {
// L to load a mesh from the EEPROM
if (parser.seen('L')) {
set_bed_leveling_enabled(false);
#if ENABLED(EEPROM_SETTINGS)
const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.storage_slot;
const int16_t a = settings.calc_num_meshes();
@ -10025,15 +10040,74 @@ void quickstop_stepper() {
#endif
}
// L to load a mesh from the EEPROM
// L or V display the map info
if (parser.seen('L') || parser.seen('V')) {
ubl.display_map(parser.byteval('T')); // 0=
ubl.display_map(parser.byteval('T'));
SERIAL_ECHOLNPAIR("ubl.mesh_is_valid = ", ubl.mesh_is_valid());
SERIAL_ECHOLNPAIR("ubl.storage_slot = ", ubl.storage_slot);
}
#endif // AUTO_BED_LEVELING_UBL
#if HAS_MESH
#if ENABLED(MESH_BED_LEVELING)
#define Z_VALUES(X,Y) mbl.z_values[X][Y]
#else
#define Z_VALUES(X,Y) z_values[X][Y]
#endif
// Subtract the given value or the mean from all mesh values
if (leveling_is_valid() && parser.seen('C')) {
const float cval = parser.value_float();
#if ENABLED(AUTO_BED_LEVELING_UBL)
set_bed_leveling_enabled(false);
ubl.adjust_mesh_to_mean(cval);
#else
#if ENABLED(M420_C_USE_MEAN)
// Get the sum and average of all mesh values
float mesh_sum = 0;
for (uint8_t x = GRID_MAX_POINTS_X; x--;)
for (uint8_t y = GRID_MAX_POINTS_Y; y--;)
mesh_sum += Z_VALUES(x, y);
const float zmean = mesh_sum / float(GRID_MAX_POINTS);
#else
// Find the low and high mesh values
float lo_val = 100, hi_val = -100;
for (uint8_t x = GRID_MAX_POINTS_X; x--;)
for (uint8_t y = GRID_MAX_POINTS_Y; y--;) {
const float z = Z_VALUES(x, y);
NOMORE(lo_val, z);
NOLESS(hi_val, z);
}
// Take the mean of the lowest and highest
const float zmean = (lo_val + hi_val) / 2.0 + cval;
#endif
// If not very close to 0, adjust the mesh
if (!NEAR_ZERO(zmean)) {
set_bed_leveling_enabled(false);
// Subtract the mean from all values
for (uint8_t x = GRID_MAX_POINTS_X; x--;)
for (uint8_t y = GRID_MAX_POINTS_Y; y--;)
Z_VALUES(x, y) -= zmean;
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
bed_level_virt_interpolate();
#endif
}
#endif
}
#endif // HAS_MESH
// V to print the matrix or mesh
if (parser.seen('V')) {
#if ABL_PLANAR
@ -10057,21 +10131,17 @@ void quickstop_stepper() {
if (parser.seen('Z')) set_z_fade_height(parser.value_linear_units(), false);
#endif
bool to_enable = false;
if (parser.seen('S')) {
to_enable = parser.value_bool();
// Enable leveling if specified, or if previously active
set_bed_leveling_enabled(to_enable);
}
const bool new_status = planner.leveling_active;
if (to_enable && !new_status) {
// Error if leveling failed to enable or reenable
if (to_enable && !planner.leveling_active) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_M420_FAILED);
}
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Bed Leveling ", new_status ? MSG_ON : MSG_OFF);
SERIAL_ECHOLNPAIR("Bed Leveling ", planner.leveling_active ? MSG_ON : MSG_OFF);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHO_START();
@ -10086,7 +10156,8 @@ void quickstop_stepper() {
if (memcmp(oldpos, current_position, sizeof(oldpos)))
report_current_position();
}
#endif
#endif // HAS_LEVELING
#if ENABLED(MESH_BED_LEVELING)

4
Marlin/ubl.h
View File

@ -95,7 +95,6 @@ class unified_bed_leveling {
#endif
static bool g29_parameter_parsing() _O0;
static void find_mean_mesh_height();
static void shift_mesh_height();
static void probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest) _O0;
static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3);
@ -118,7 +117,8 @@ class unified_bed_leveling {
static mesh_index_pair find_furthest_invalid_mesh_point() _O0;
static void reset();
static void invalidate();
static void set_all_mesh_points_to_value(const float);
static void set_all_mesh_points_to_value(const float value);
static void adjust_mesh_to_mean(const float value);
static bool sanity_check();
static void G29() _O0; // O0 for no optimization

8
Marlin/ubl_G29.cpp
View File

@ -539,7 +539,7 @@
#endif
break;
case 5: find_mean_mesh_height(); break;
case 5: adjust_mesh_to_mean(g29_constant); break;
case 6: shift_mesh_height(); break;
}
@ -629,7 +629,7 @@
return;
}
void unified_bed_leveling::find_mean_mesh_height() {
void unified_bed_leveling::adjust_mesh_to_mean(const float value) {
float sum = 0.0;
int n = 0;
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
@ -664,7 +664,7 @@
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
if (!isnan(z_values[x][y]))
z_values[x][y] -= mean + g29_constant;
z_values[x][y] -= mean + value;
}
void unified_bed_leveling::shift_mesh_height() {
@ -1076,7 +1076,7 @@
SERIAL_EOL();
#endif
find_mean_mesh_height();
adjust_mesh_to_mean(g29_constant);
#if HAS_BED_PROBE
SERIAL_PROTOCOLPGM("zprobe_zoffset: ");