From c2f13be7507b8c86317c8f0b89a8ae61956fa0a8 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 25 Sep 2016 05:28:04 -0500 Subject: [PATCH 1/2] Mightyboard Revision E --- Marlin/boards.h | 1 + Marlin/pins.h | 2 + Marlin/pins_MIGHTYBOARD_REVE.h | 205 +++++++++++++++++++++++++++++++++ Marlin/ultralcd_impl_HD44780.h | 6 +- 4 files changed, 213 insertions(+), 1 deletion(-) create mode 100644 Marlin/pins_MIGHTYBOARD_REVE.h diff --git a/Marlin/boards.h b/Marlin/boards.h index bf7be0edf..285bfb7ab 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -33,6 +33,7 @@ #define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12 #define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 #define BOARD_SETHI 20 // Sethi 3D_1 +#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E #define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2 #define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) #define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) diff --git a/Marlin/pins.h b/Marlin/pins.h index 48f3cf7eb..8fc194f62 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -39,6 +39,8 @@ #include "pins_CHEAPTRONIC.h" #elif MB(SETHI) #include "pins_SETHI.h" +#elif MB(MIGHTYBOARD_REVE) + #include "pins_MIGHTYBOARD_REVE.h" #elif MB(RAMPS_OLD) #include "pins_RAMPS_OLD.h" #elif MB(RAMPS_13_EFB) diff --git a/Marlin/pins_MIGHTYBOARD_REVE.h b/Marlin/pins_MIGHTYBOARD_REVE.h new file mode 100644 index 000000000..fc4d02ed2 --- /dev/null +++ b/Marlin/pins_MIGHTYBOARD_REVE.h @@ -0,0 +1,205 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Mightyboard Rev.E pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "MB Replicator" +#define BOARD_NAME "Mightyboard" + +#define LARGE_FLASH true + +// +// Servos +// +#define SERVO0_PIN 36 // C1 (1280-EX1) +#define SERVO1_PIN 37 // C0 (1280-EX2) +#define SERVO2_PIN 40 // G1 (1280-EX3) +#define SERVO3_PIN 41 // G0 (1280-EX4) + +// +// Limit Switches +// +#define X_MIN_PIN 49 // L0 +#define X_MAX_PIN 48 // L1 +#define Y_MIN_PIN 47 // L2 +#define Y_MAX_PIN 46 // L3 +#define Z_MIN_PIN 43 // L6 +#define Z_MAX_PIN 42 // L7 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 42 +#endif + +// +// Steppers +// +#define X_STEP_PIN 55 // F1 +#define X_DIR_PIN 54 // F0 +#define X_ENABLE_PIN 56 // F2 + +#define Y_STEP_PIN 59 // F5 +#define Y_DIR_PIN 58 // F4 +#define Y_ENABLE_PIN 60 // F6 + +#define Z_STEP_PIN 63 // K1 +#define Z_DIR_PIN 62 // K0 +#define Z_ENABLE_PIN 64 // K2 + +#define E0_STEP_PIN 25 // A3 +#define E0_DIR_PIN 24 // A2 +#define E0_ENABLE_PIN 26 // A4 + +#define E1_STEP_PIN 29 // A7 +#define E1_DIR_PIN 28 // A6 +#define E1_ENABLE_PIN 39 // G2 + +// +// I2C Digipots - MCP4018 +// Address 5E (2F << 1) +// Set from 0 - 127 with stop bit. +// (Ex. 3F << 1 | 1) +// +#define DIGIPOTS_I2C_SCL 76 // J5 +#define DIGIPOTS_I2C_SDA_X 57 // F3 +#define DIGIPOTS_I2C_SDA_Y 61 // F7 +#define DIGIPOTS_I2C_SDA_Z 65 // K3 +#define DIGIPOTS_I2C_SDA_E0 27 // A5 +#define DIGIPOTS_I2C_SDA_E1 77 // J6 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN 69 // K7 + +// SPI for Max6675 or Max31855 Thermocouple +// Uses a separate SPI bus +// +// 3 E5 DO (SO) +// 5 E3 CS1 +// 2 E4 CS2 +// 78 E2 SCK +// +#define THERMO_SCK_PIN 78 // E2 +#define THERMO_DO_PIN 3 // E5 +#define THERMO_CS1 5 // E3 +#define THERMO_CS2 2 // E4 + +// +// Augmentation for auto-assigning plugs +// +// Two thermocouple connectors allows for either +// 2 extruders or 1 extruder and a heated bed. +// With no heated bed, an additional 24V fan is possible. +// +#define MOSFET_A_PIN 6 // H3 +#define MOSFET_B_PIN 9 // B5 +#define MOSFET_C_PIN 45 // L4 +#define MOSFET_D_PIN 44 // L5 + +#if HOTENDS > 1 + #if TEMP_SENSOR_BED + #define IS_EEB + #else + #define IS_EEF + #endif +#elif TEMP_SENSOR_BED + #define IS_EFB +#else + #define IS_EFF +#endif + +// +// Heaters / Fans (24V) +// +#define HEATER_0_PIN MOSFET_A_PIN + +#if ENABLED(IS_EFB) // Hotend, Fan, Bed + #define FAN_PIN MOSFET_B_PIN + #define HEATER_BED_PIN MOSFET_C_PIN +#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN MOSFET_B_PIN + #define FAN_PIN MOSFET_C_PIN +#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN MOSFET_B_PIN + #define HEATER_BED_PIN MOSFET_C_PIN +#elif ENABLED(IS_EFF) // Hotend, Fan, Fan + #define FAN_PIN MOSFET_B_PIN + #define FAN1_PIN MOSFET_C_PIN +#elif ENABLED(IS_SF) // Spindle, Fan + #define FAN_PIN MOSFET_C_PIN +#endif + +#ifndef FAN_PIN + #define FAN_PIN MOSFET_D_PIN +#endif + +// +// Extruder Auto Fan Pins +// +#define EXTRUDER_0_AUTO_FAN 7 // H4 +#define EXTRUDER_1_AUTO_FAN 12 // B6 + +// +// Misc. Functions +// +#define LED_PIN 13 // B7 +#define CUTOFF_RESET_PIN 16 // H1 +#define CUTOFF_TEST_PIN 17 // H0 + +// +// LCD / Controller +// +// Replicator uses a 3-wire SR controller with HD44780 +// For now, pretend it's the SAV +// +#define SAV_3DLCD +#define SR_DATA_PIN 34 // C3 +#define SR_CLK_PIN 35 // C2 +#define SR_STROBE_PIN 33 // C4 + +#define BTN_UP 75 // J4 +#define BTN_DOWN 73 // J3 +#define BTN_LEFT 72 // J2 +#define BTN_RIGHT 14 // J1 +#define BTN_CENTER 15 // J0 +#define BTN_ENC BTN_CENTER + +#define BEEPER_PIN 4 // G5 + +#define STAT_LED_RED 32 // C5 +#define STAT_LED_BLUE 31 // C6 (Actually green) + +// +// SD Card +// +#define SDSS 53 // B0 +#define SD_DETECT_PIN 30 // C7 + diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index 3babc65d9..692f7ae24 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -161,7 +161,11 @@ extern volatile uint8_t buttons; //an extended version of the last checked butt #include #include #define LCD_CLASS LiquidCrystal_SR - LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN); + #if defined(SR_STROBE_PIN) + LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN, SR_STROBE_PIN); + #else + LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN); + #endif #elif ENABLED(LCM1602) #include #include From ab84ed22cac2ad82d027a06f4a8fcf9d5c70ff8d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 25 Sep 2016 05:28:22 -0500 Subject: [PATCH 2/2] No such thing as G6 and G7 pins --- Marlin/fastio.h | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 3a608e005..1c21672bc 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -1835,18 +1835,6 @@ #define PG5_WPORT PORTG #define PG5_DDR DDRG #define PG5_PWM &OCR0B - #undef PG6 - #define PG6_PIN PING6 - #define PG6_RPORT PING - #define PG6_WPORT PORTG - #define PG6_DDR DDRG - #define PG6_PWM NULL - #undef PG7 - #define PG7_PIN PING7 - #define PG7_RPORT PING - #define PG7_WPORT PORTG - #define PG7_DDR DDRG - #define PG7_PWM NULL #undef PH0 #define PH0_PIN PINH0