From 8efd4cfd730ecf9a1b1b975461b46e13839c1b07 Mon Sep 17 00:00:00 2001 From: Dirk Eichel Date: Fri, 1 Mar 2013 16:27:35 +0100 Subject: [PATCH 1/4] fixed merge conflict --- Marlin/language.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index 15ebb9871..697431d81 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,10 +1,12 @@ -#ifndef LANGUAGE_H + + +
#ifndef LANGUAGE_H
 #define LANGUAGE_H
 
 // NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
 //
-//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" 
-//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
+//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" 
+//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
 
 // Languages
 // 1  English
@@ -1462,3 +1464,4 @@
 
 #endif
 #endif // ifndef LANGUAGE_H
+
\ No newline at end of file From ceb5ee38af334903120ade114b028f452f2107ab Mon Sep 17 00:00:00 2001 From: Dirk Eichel Date: Fri, 1 Mar 2013 17:27:57 +0100 Subject: [PATCH 2/4] Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin --- Marlin/language.h | 2930 ++++++++++++++++++++++----------------------- 1 file changed, 1464 insertions(+), 1466 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index 697431d81..d17f6f667 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,1467 +1,1465 @@ - - -
#ifndef LANGUAGE_H
-#define LANGUAGE_H
-
-// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
-//
-//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" 
-//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
-
-// Languages
-// 1  English
-// 2  Polish
-// 3  French	(awaiting translation!)
-// 4  German
-// 5  Spanish
-// 6  Russian
-// 7  Italian
-// 8  Portuguese
-// 9  Finnish
-
-#ifndef LANGUAGE_CHOICE
-#define LANGUAGE_CHOICE 1  // Pick your language from the list above
-#endif
-
-#define PROTOCOL_VERSION "1.0"
-
-#if MOTHERBOARD == 7 || MOTHERBOARD == 71
-	#define MACHINE_NAME "Ultimaker"
-	#define FIRMWARE_URL "http://firmware.ultimaker.com"
-#else
-	#define MACHINE_NAME "Mendel"
-	#define FIRMWARE_URL "http://www.mendel-parts.com"
-#endif
-
-#define STRINGIFY_(n) #n
-#define STRINGIFY(n) STRINGIFY_(n)
-
-#if LANGUAGE_CHOICE == 1
-
-// LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " Ready."
-	#define MSG_SD_INSERTED "Card inserted"
-	#define MSG_SD_REMOVED "Card removed"
-	#define MSG_MAIN "Main"
-	#define MSG_AUTOSTART "Autostart"
-	#define MSG_DISABLE_STEPPERS "Disable Steppers"
-	#define MSG_AUTO_HOME "Auto Home"
-	#define MSG_SET_ORIGIN "Set Origin"
-	#define MSG_PREHEAT_PLA "Preheat PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
-	#define MSG_PREHEAT_ABS "Preheat ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
-	#define MSG_COOLDOWN "Cooldown"
-	#define MSG_EXTRUDE "Extrude"
-	#define MSG_RETRACT "Retract"
-	#define MSG_MOVE_AXIS "Move Axis"
-	#define MSG_SPEED "Speed"
-	#define MSG_NOZZLE "Nozzle"
-	#define MSG_NOZZLE1 "Nozzle2"
-	#define MSG_NOZZLE2 "Nozzle3"
-	#define MSG_BED "Bed"
-	#define MSG_FAN_SPEED "Fan speed"
-	#define MSG_FLOW "Flow"
-	#define MSG_CONTROL "Control"
-	#define MSG_MIN " \002 Min"
-	#define MSG_MAX " \002 Max"
-	#define MSG_FACTOR " \002 Fact"
-	#define MSG_AUTOTEMP "Autotemp"
-	#define MSG_ON "On "
-	#define MSG_OFF "Off"
-	#define MSG_PID_P "PID-P"
-	#define MSG_PID_I "PID-I"
-	#define MSG_PID_D "PID-D"
-	#define MSG_PID_C "PID-C"
-	#define MSG_ACC  "Accel"
-	#define MSG_VXY_JERK "Vxy-jerk"
-	#define MSG_VMAX "Vmax "
-	#define MSG_X "x"
-	#define MSG_Y "y"
-	#define MSG_Z "z"
-	#define MSG_E "e"
-	#define MSG_VMIN "Vmin"
-	#define MSG_VTRAV_MIN "VTrav min"
-	#define MSG_AMAX "Amax "
-	#define MSG_A_RETRACT "A-retract"
-	#define MSG_XSTEPS "Xsteps/mm"
-	#define MSG_YSTEPS "Ysteps/mm"
-	#define MSG_ZSTEPS "Zsteps/mm"
-	#define MSG_ESTEPS "Esteps/mm"
-	#define MSG_RECTRACT "Rectract"
-	#define MSG_TEMPERATURE "Temperature"
-	#define MSG_MOTION "Motion"
-	#define MSG_STORE_EPROM "Store memory"
-	#define MSG_LOAD_EPROM "Load memory"
-	#define MSG_RESTORE_FAILSAFE "Restore Failsafe"
-	#define MSG_REFRESH "Refresh"
-	#define MSG_WATCH "Watch"
-	#define MSG_PREPARE "Prepare"
-	#define MSG_TUNE "Tune"
-	#define MSG_PAUSE_PRINT "Pause Print"
-	#define MSG_RESUME_PRINT "Resume Print"
-	#define MSG_STOP_PRINT "Stop Print"
-	#define MSG_CARD_MENU "Card Menu"
-	#define MSG_NO_CARD "No Card"
-	#define MSG_DWELL "Sleep..."
-	#define MSG_USERWAIT "Wait for user..."
-	#define MSG_RESUMING "Resuming print"
-	#define MSG_NO_MOVE "No move."
-	#define MSG_KILLED "KILLED. "
-	#define MSG_STOPPED "STOPPED. "
-	#define MSG_CONTROL_RETRACT  "Retract mm"
-	#define MSG_CONTROL_RETRACTF "Retract  F"
-	#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
-	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
-	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
-	#define MSG_AUTORETRACT "AutoRetr."
-	#define MSG_FILAMENTCHANGE "Change filament"
-	#define MSG_INIT_SDCARD "Init. SD-Card"	
-	#define MSG_CNG_SDCARD "Change SD-Card"
-
-// Serial Console Messages
-
-	#define MSG_Enqueing "enqueing \""
-	#define MSG_POWERUP "PowerUp"
-	#define MSG_EXTERNAL_RESET " External Reset"
-	#define MSG_BROWNOUT_RESET " Brown out Reset"
-	#define MSG_WATCHDOG_RESET " Watchdog Reset"
-	#define MSG_SOFTWARE_RESET " Software Reset"
-	#define MSG_MARLIN "Marlin "
-	#define MSG_AUTHOR " | Author: "
-	#define MSG_CONFIGURATION_VER " Last Updated: "
-	#define MSG_FREE_MEMORY " Free Memory: "
-	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-	#define MSG_OK "ok"
-	#define MSG_FILE_SAVED "Done saving file."
-	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
-	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
-	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
-	#define MSG_FILE_PRINTED "Done printing file"
-	#define MSG_BEGIN_FILE_LIST "Begin file list"
-	#define MSG_END_FILE_LIST "End file list"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
-	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
-	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
-	#define MSG_HEATING "Heating..."
-	#define MSG_HEATING_COMPLETE "Heating done."
-	#define MSG_BED_HEATING "Bed Heating."
-	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X " Count X: "
-	#define MSG_ERR_KILLED "Printer halted. kill() called!"
-	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
-	#define MSG_RESEND "Resend: "
-	#define MSG_UNKNOWN_COMMAND "Unknown command: \""
-	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
-	#define MSG_INVALID_EXTRUDER "Invalid extruder"
-	#define MSG_X_MIN "x_min: "
-	#define MSG_X_MAX "x_max: "
-	#define MSG_Y_MIN "y_min: "
-	#define MSG_Y_MAX "y_max: "
-	#define MSG_Z_MIN "z_min: "
-	#define MSG_Z_MAX "z_max: "
-	#define MSG_M119_REPORT "Reporting endstop status"
-	#define MSG_ENDSTOP_HIT "TRIGGERED"
-	#define MSG_ENDSTOP_OPEN "open"
-	#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
-	#define MSG_SD_INIT_FAIL "SD init fail"
-	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
-	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
-	#define MSG_SD_CARD_OK "SD card ok"
-	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
-	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
-	#define MSG_SD_FILE_OPENED "File opened: "
-	#define MSG_SD_SIZE " Size: "
-	#define MSG_SD_FILE_SELECTED "File selected"
-	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
-	#define MSG_SD_PRINTING_BYTE "SD printing byte "
-	#define MSG_SD_NOT_PRINTING "Not SD printing"
-	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
-
-	#define MSG_STEPPER_TO_HIGH "Steprate to high: "
-	#define MSG_ENDSTOPS_HIT "endstops hit: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 2
-
-// LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " Gotowe."
-	#define MSG_SD_INSERTED "Karta wlozona"
-	#define MSG_SD_REMOVED "Karta usunieta"
-	#define MSG_MAIN "Main"
-	#define MSG_AUTOSTART "Autostart"
-	#define MSG_DISABLE_STEPPERS "Wylacz silniki"
-	#define MSG_AUTO_HOME "Auto. poz. zerowa"
-	#define MSG_SET_ORIGIN "Ustaw punkt zerowy"
-	#define MSG_PREHEAT_PLA "Rozgrzej PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
-	#define MSG_PREHEAT_ABS "Rozgrzej ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
-	#define MSG_COOLDOWN "Chlodzenie"
-	#define MSG_EXTRUDE "Ekstruzja"
-	#define MSG_RETRACT "Cofanie"
-	#define MSG_MOVE_AXIS "Ruch osi"
-	#define MSG_SPEED "Predkosc"
-	#define MSG_NOZZLE "Dysza"
-	#define MSG_NOZZLE1 "Dysza2"
-	#define MSG_NOZZLE2 "Dysza3"
-	#define MSG_BED "Loze"
-	#define MSG_FAN_SPEED "Obroty wiatraka"
-	#define MSG_FLOW "Przeplyw"
-	#define MSG_CONTROL "Kontrola"
-	#define MSG_MIN " \002 Min"
-	#define MSG_MAX " \002 Max"
-	#define MSG_FACTOR " \002 Mnoznik"
-	#define MSG_AUTOTEMP "Auto. temp."
-	#define MSG_ON "Wl. "
-	#define MSG_OFF "Wyl."
-	#define MSG_PID_P "PID-P"
-	#define MSG_PID_I "PID-I"
-	#define MSG_PID_D "PID-D"
-	#define MSG_PID_C "PID-C"
-	#define MSG_ACC  "Acc"
-	#define MSG_VXY_JERK "Zryw Vxy"
-	#define MSG_VMAX "Vmax"
-	#define MSG_X "x"
-	#define MSG_Y "y"
-	#define MSG_Z "z"
-	#define MSG_E "e"
-	#define MSG_VMIN "Vmin"
-	#define MSG_VTRAV_MIN "Vskok min"
-	#define MSG_AMAX "Amax"
-	#define MSG_A_RETRACT "A-wycofanie"
-	#define MSG_XSTEPS "krokiX/mm"
-	#define MSG_YSTEPS "krokiY/mm"
-	#define MSG_ZSTEPS "krokiZ/mm"
-	#define MSG_ESTEPS "krokiE/mm"
-	#define MSG_RECTRACT "Wycofanie"
-	#define MSG_TEMPERATURE "Temperatura"
-	#define MSG_MOTION "Ruch"
-	#define MSG_STORE_EPROM "Zapisz w pamieci"
-	#define MSG_LOAD_EPROM "Wczytaj z pamieci"
-	#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
-	#define MSG_REFRESH "\004Odswiez"
-	#define MSG_WATCH "Obserwuj"
-	#define MSG_PREPARE "Przygotuj"
-	#define MSG_CONTROL "Kontroluj"
-	#define MSG_TUNE "Strojenie"
-	#define MSG_PAUSE_PRINT "Pauza"
-	#define MSG_RESUME_PRINT "Wznowienie"
-	#define MSG_STOP_PRINT "Stop"
-	#define MSG_CARD_MENU "Menu SDCard"
-	#define MSG_NO_CARD "Brak karty"
-	#define MSG_DWELL "Uspij..."
-	#define MSG_USERWAIT "Czekaj na uzytkownika..."
-	#define MSG_RESUMING "Wznawiam drukowanie"
-	#define MSG_NO_MOVE "Brak ruchu."
-	#define MSG_PART_RELEASE "Czesciowe zwolnienie"
-	#define MSG_KILLED "Ubity. "
-	#define MSG_STOPPED "Zatrzymany. "
-	#define MSG_STEPPER_RELEASED "Zwolniony."
-	#define MSG_CONTROL_RETRACT  "Wycofaj mm"
-	#define MSG_CONTROL_RETRACTF "Wycofaj  F"
-	#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
-	#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
-	#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof.  F"
-	#define MSG_AUTORETRACT "Auto. wycofanie"
-	#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-	#define MSG_Enqueing "Kolejkowanie \""
-	#define MSG_POWERUP "Zasilanie wlaczone"
-	#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
-	#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
-	#define MSG_WATCHDOG_RESET " Reset (watchdog)"
-	#define MSG_SOFTWARE_RESET " Reset (programowy)"
-	#define MSG_MARLIN "Marlin "
-	#define MSG_AUTHOR " | Autor: "
-	#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
-	#define MSG_FREE_MEMORY " Wolna pamiec: "
-	#define MSG_PLANNER_BUFFER_BYTES "  Bufor planisty krokow (w bajtach): "
-	#define MSG_OK "ok"
-	#define MSG_FILE_SAVED "Plik zapisany."
-	#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
-	#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
-	#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
-	#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
-	#define MSG_BEGIN_FILE_LIST "Start listy plikow"
-	#define MSG_END_FILE_LIST "Koniec listy plikow"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
-	#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
-	#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
-	#define MSG_HEATING "Nagrzewanie ekstrudera..."
-	#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
-	#define MSG_BED_HEATING "Nagrzewanie loza..."
-	#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X " Liczenie X: "
-	#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
-	#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
-	#define MSG_RESEND "Wyslij ponownie: "
-	#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
-	#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
-	#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
-	#define MSG_X_MIN "x_min: "
-	#define MSG_X_MAX "x_max: "
-	#define MSG_Y_MIN "y_min: "
-	#define MSG_Y_MAX "y_max: "
-	#define MSG_Z_MIN "z_min: "
-	#define MSG_Z_MAX "z_max: "
-	#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
-	#define MSG_ENDSTOP_HIT "WYZWOLONY"
-	#define MSG_ENDSTOP_OPEN "otwarty"
-	#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
-	#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
-	#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
-	#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
-	#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
-	#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
-	#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
-	#define MSG_SD_FILE_OPENED "Otwarto plik:"
-	#define MSG_SD_SIZE " Rozmiar:"
-	#define MSG_SD_FILE_SELECTED "Wybrano plik"
-	#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
-	#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
-	#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
-	#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
-
-	#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
-	#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 3
-
-#define WELCOME_MSG MACHINE_NAME " Pret."
-#define MSG_SD_INSERTED "Carte inseree"
-#define MSG_SD_REMOVED "Carte retiree"
-#define MSG_MAIN " Principal \003"
-#define MSG_AUTOSTART " Demarrage auto."
-#define MSG_DISABLE_STEPPERS " Desactiver moteurs"
-#define MSG_AUTO_HOME " Home auto."
-#define MSG_SET_ORIGIN " Regler origine"
-#define MSG_PREHEAT_PLA " Prechauffage PLA"
-#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
-#define MSG_PREHEAT_ABS " Prechauffage ABS"
-#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
-#define MSG_COOLDOWN " Refroidissement"
-#define MSG_EXTRUDE " Extrusion"
-#define MSG_RETRACT " Retractation"
-#define MSG_PREHEAT_PLA " Prechauffage PLA"
-#define MSG_PREHEAT_ABS " Prechauffage ABS"
-#define MSG_MOVE_AXIS " Deplacer axe \x7E"
-#define MSG_SPEED " Vitesse:"
-#define MSG_NOZZLE " \002Buse:"
-#define MSG_NOZZLE1 " \002Buse2:"
-#define MSG_NOZZLE2 " \002Buse3:"
-#define MSG_BED " \002Lit:"
-#define MSG_FAN_SPEED " Vitesse ventilateur:"
-#define MSG_FLOW " Flux:"
-#define MSG_CONTROL " Controle \003"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Facteur:"
-#define MSG_AUTOTEMP " Temp. Auto.:"
-#define MSG_ON "Marche "
-#define MSG_OFF "Arret"
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC " Acc:"
-#define MSG_VXY_JERK " Vxy-jerk: "
-#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " Vdepl min:"
-#define MSG_AMAX " Amax "
-#define MSG_A_RETRACT " A-retract:"
-#define MSG_XSTEPS " Xpas/mm:"
-#define MSG_YSTEPS " Ypas/mm:"
-#define MSG_ZSTEPS " Zpas/mm:"
-#define MSG_ESTEPS " Epas/mm:"
-#define MSG_MAIN_WIDE " Principal \003"
-#define MSG_RECTRACT_WIDE " Rectractater \x7E"
-#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
-#define MSG_TEMPERATURE_RTN " Temperature \003"
-#define MSG_MOTION_WIDE " Mouvement \x7E"
-#define MSG_STORE_EPROM " Sauvegarder memoire"
-#define MSG_LOAD_EPROM " Lire memoire"
-#define MSG_RESTORE_FAILSAFE " Restaurer memoire"
-#define MSG_REFRESH "\004Actualiser"
-#define MSG_WATCH " Surveiller \003"
-#define MSG_PREPARE " Preparer \x7E"
-#define MSG_PREPARE_ALT " Prepare \003"
-#define MSG_CONTROL_ARROW " Controle \x7E"
-#define MSG_RETRACT_ARROW " Retracter \x7E"
-#define MSG_TUNE " Regler \x7E"
-#define MSG_PAUSE_PRINT " Pause impression \x7E"
-#define MSG_RESUME_PRINT " Reprendre impression \x7E"
-#define MSG_STOP_PRINT " Arreter impression \x7E"
-#define MSG_CARD_MENU " Menu carte \x7E"
-#define MSG_NO_CARD " Pas de carte"
-#define MSG_DWELL "Repos..."
-#define MSG_USERWAIT "Attente de l'utilisateur..."
-#define MSG_NO_MOVE "Aucun mouvement."
-#define MSG_PART_RELEASE "Relache partielle"
-#define MSG_KILLED "TUE."
-#define MSG_STOPPED "STOPPE."
-#define MSG_STEPPER_RELEASED "RELACHE."
-#define MSG_CONTROL_RETRACT " Retractation mm:"
-#define MSG_CONTROL_RETRACTF " Retractation F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
-#define MSG_AUTORETRACT " Retract. Auto.:"
-#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-#define MSG_Enqueing "Mise en tampon \""
-#define MSG_POWERUP "Allumage"
-#define MSG_EXTERNAL_RESET " RAZ Externe"
-#define MSG_BROWNOUT_RESET " RAZ defaut alim."
-#define MSG_WATCHDOG_RESET " RAZ Watchdog"
-#define MSG_SOFTWARE_RESET " RAZ logicielle"
-#define MSG_MARLIN "Marlin "
-#define MSG_AUTHOR " | Auteur: "
-#define MSG_CONFIGURATION_VER " Derniere MaJ: "
-#define MSG_FREE_MEMORY " Memoire libre: "
-#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
-#define MSG_OK "ok"
-#define MSG_FILE_SAVED "Fichier enregistre."
-#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
-#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
-#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
-#define MSG_FILE_PRINTED "Impression terminee"
-#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
-#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
-#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
-#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
-#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
-#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
-#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
-#define MSG_HEATING "En chauffe..."
-#define MSG_HEATING_COMPLETE "Chauffe terminee."
-#define MSG_BED_HEATING "Chauffe du lit."
-#define MSG_BED_DONE "Chauffe du lit terminee."
-#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X " Compteur X: "
-#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
-#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
-#define MSG_RESEND "Renvoie: "
-#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
-#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
-#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
-#define MSG_X_MIN "x_min: "
-#define MSG_X_MAX "x_max: "
-#define MSG_Y_MIN "y_min: "
-#define MSG_Y_MAX "y_max: "
-#define MSG_Z_MIN "z_min: "
-#define MSG_Z_MAX "z_max: "
-#define MSG_M119_REPORT "Affichage du status des fin de course"
-#define MSG_ENDSTOP_HIT "DECLENCHE"
-#define MSG_ENDSTOP_OPEN "OUVERT"
-#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
-#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
-#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
-#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
-#define MSG_SD_CARD_OK "Carte SD Ok"
-#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
-#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
-#define MSG_SD_FILE_OPENED "Fichier ouvert: "
-#define MSG_SD_SIZE " Taille: "
-#define MSG_SD_FILE_SELECTED "Fichier selectionne"
-#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
-#define MSG_SD_PRINTING_BYTE "Octet impression SD "
-#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
-#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
-#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
-
-#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
-#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
-#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
-#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
-	
-#endif
-
-
-#if LANGUAGE_CHOICE == 4
-
-// LCD Menu Messages
-
-	#define WELCOME_MSG MACHINE_NAME " Bereit."
-
-	#define MSG_SD_INSERTED      "SDKarte erkannt"
-	#define MSG_SD_REMOVED       "SDKarte entfernt"
-	#define MSG_MAIN             "Hauptmneü"
-	#define MSG_AUTOSTART        "Autostart"
-	#define MSG_DISABLE_STEPPERS "Stepper abschalten"
-	#define MSG_AUTO_HOME        "Auto Nullpunkt"
-	#define MSG_SET_ORIGIN       "Setze Nullpunkt"
-	#define MSG_PREHEAT_PLA      "Vorwärmen PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
-	#define MSG_PREHEAT_ABS      "Vorwärmen ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
-	#define MSG_COOLDOWN         "Abkühlen"
-	#define MSG_EXTRUDE          "Extrude"
-	#define MSG_RETRACT          "Retract"
-	#define MSG_MOVE_AXIS        "Achsen bewegen"
-	#define MSG_SPEED            "Geschw"
-	#define MSG_NOZZLE           "Düse"
-	#define MSG_NOZZLE1          "Düse2"
-	#define MSG_NOZZLE2          "Düse3"
-	#define MSG_BED              "Bett"
-	#define MSG_FAN_SPEED        "Lüftergeschw."
-	#define MSG_FLOW             "Fluß"
-	#define MSG_CONTROL          "Einstellungen"
-	#define MSG_MIN              "\002 Min"
-	#define MSG_MAX              "\002 Max"
-	#define MSG_FACTOR           "\002 Faktor"
-	#define MSG_AUTOTEMP         "AutoTemp"
-	#define MSG_ON               "Ein"
-	#define MSG_OFF              "Aus"
-	#define MSG_PID_P            "PID-P"
-	#define MSG_PID_I            "PID-I"
-	#define MSG_PID_D            "PID-D"
-	#define MSG_PID_C            "PID-C"
-	#define MSG_ACC              "Acc"
-	#define MSG_VXY_JERK         "Vxy-jerk"
-	#define MSG_VMAX             "Vmax "
-	#define MSG_X                "x"
-	#define MSG_Y                "y"
-	#define MSG_Z                "z"
-	#define MSG_E                "e"
-	#define MSG_VMIN             "Vmin"
-	#define MSG_VTRAV_MIN        "VTrav min"
-	#define MSG_AMAX             "Amax "
-	#define MSG_A_RETRACT        "A-Retract"
-	#define MSG_XSTEPS           "Xsteps/mm"
-	#define MSG_YSTEPS           "Ysteps/mm"
-	#define MSG_ZSTEPS           "Zsteps/mm"
-	#define MSG_ESTEPS           "Esteps/mm"
-	#define MSG_RECTRACT_WIDE    "Rectract"
-	#define MSG_WATCH            "Beobachten"
-	#define MSG_TEMPERATURE      "Temperatur"
-	#define MSG_MOTION           "Bewegung"
-	#define MSG_STORE_EPROM      "EPROM speichern"
-	#define MSG_LOAD_EPROM       "EPROM laden"
-	#define MSG_RESTORE_FAILSAFE "Standardkonfig."
-	#define MSG_REFRESH          "Aktualisieren"
-	#define MSG_PREPARE          "Vorbereitung"
-	#define MSG_CONTROL          "Einstellungen"
-	#define MSG_TUNE             "Justierung"
-	#define MSG_PAUSE_PRINT      "Druck anhalten"
-	#define MSG_RESUME_PRINT     "Druck fortsetz"
-	#define MSG_STOP_PRINT       "Druck stoppen"
-	#define MSG_CARD_MENU        "SDKarten Menü"
-	#define MSG_NO_CARD          "Keine SDKarte"
-	#define MSG_DWELL            "Warten..."		
-	#define MSG_USERWAIT         "Warte auf Nutzer..."
-    #define MSG_RESUMING         "Druck fortsetzung"
-	#define MSG_NO_MOVE          "Kein Zug."
-	#define MSG_PART_RELEASE     "Stepper tlw frei"
-	#define MSG_KILLED           "KILLED"
-	#define MSG_STOPPED          "GESTOPPT"
-	#define MSG_STEPPER_RELEASED "Stepper frei"
-    #define MSG_CONTROL_RETRACT  "Retract mm"
-    #define MSG_CONTROL_RETRACTF "Retract  F"
-    #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
-    #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
-    #define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
-    #define MSG_AUTORETRACT      "AutoRetr."
-    #define MSG_FILAMENTCHANGE "Filament wechseln"
-	
-// Serial Console Messages
-
-	#define MSG_Enqueing "enqueing \""
-	#define MSG_POWERUP "PowerUp"
-	#define MSG_EXTERNAL_RESET " External Reset"
-	#define MSG_BROWNOUT_RESET " Brown out Reset"
-	#define MSG_WATCHDOG_RESET " Watchdog Reset"
-	#define MSG_SOFTWARE_RESET " Software Reset"
-	#define MSG_MARLIN "Marlin: "
-	#define MSG_AUTHOR " | Author: "
-	#define MSG_CONFIGURATION_VER " Last Updated: "
-	#define MSG_FREE_MEMORY " Free Memory: "
-	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-	#define MSG_OK "ok"
-	#define MSG_FILE_SAVED "Done saving file."
-	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
-	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
-	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
-	#define MSG_FILE_PRINTED "Done printing file"
-	#define MSG_BEGIN_FILE_LIST "Begin file list"
-	#define MSG_END_FILE_LIST "End file list"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
-	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
-	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
-	#define MSG_HEATING "Heating..."
-	#define MSG_HEATING_COMPLETE "Heating done."
-	#define MSG_BED_HEATING "Bed Heating."
-	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X " Count X:"
-	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
-	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
-	#define MSG_RESEND "Resend:"
-	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
-	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
-	#define MSG_INVALID_EXTRUDER "Invalid extruder"
-	#define MSG_X_MIN "x_min: "
-	#define MSG_X_MAX "x_max: "
-	#define MSG_Y_MIN "y_min: "
-	#define MSG_Y_MAX "y_max: "
-	#define MSG_Z_MIN "z_min: "
-	#define MSG_Z_MAX "z_max: "
-	#define MSG_M119_REPORT "Reporting endstop status"
-	#define MSG_ENDSTOP_HIT "TRIGGERED"
-	#define MSG_ENDSTOP_OPEN "open"
-	#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
-	#define MSG_SD_INIT_FAIL "SD init fail"
-	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
-	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
-	#define MSG_SD_CARD_OK "SD card ok"
-	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
-	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
-	#define MSG_SD_FILE_OPENED "File opened:"
-	#define MSG_SD_SIZE " Size:"
-	#define MSG_SD_FILE_SELECTED "File selected"
-	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
-	#define MSG_SD_PRINTING_BYTE "SD printing byte "
-	#define MSG_SD_NOT_PRINTING "Not SD printing"
-	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
-
-	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
-	#define MSG_ENDSTOPS_HIT "endstops hit: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 5
-
-// LCD Menu Messages
-#define WELCOME_MSG MACHINE_NAME " Lista."
-#define MSG_SD_INSERTED "Tarjeta SD Colocada"
-#define MSG_SD_REMOVED "Tarjeta SD Retirada"
-#define MSG_MAIN " Menu Principal \003"
-#define MSG_AUTOSTART " Autostart"
-#define MSG_DISABLE_STEPPERS " Apagar Motores"
-#define MSG_AUTO_HOME " Llevar Ejes al Cero"
-#define MSG_SET_ORIGIN " Establecer Cero"
-#define MSG_COOLDOWN " Enfriar"
-#define MSG_EXTRUDE " Extruir"
-#define MSG_RETRACT " Retraer"
-#define MSG_PREHEAT_PLA " Precalentar PLA"
-#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
-#define MSG_PREHEAT_ABS " Precalentar ABS"
-#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
-#define MSG_MOVE_AXIS " Mover Ejes      \x7E"
-#define MSG_SPEED " Velocidad:"
-#define MSG_NOZZLE " \002Nozzle:"
-#define MSG_NOZZLE1 " \002Nozzle2:"
-#define MSG_NOZZLE2 " \002Nozzle3:"
-#define MSG_BED " \002Base:"
-#define MSG_FAN_SPEED " Ventilador:"
-#define MSG_FLOW " Flujo:"
-#define MSG_CONTROL " Control \003"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Fact:"
-#define MSG_AUTOTEMP " Autotemp:"
-#define MSG_ON "On "
-#define MSG_OFF "Off"
-#define MSG_PID_P " PID-P: "
-#define MSG_PID_I " PID-I: "
-#define MSG_PID_D " PID-D: "
-#define MSG_PID_C " PID-C: "
-#define MSG_ACC  " Acc:"
-#define MSG_VXY_JERK " Vxy-jerk: "
-#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN " Vmin:"
-#define MSG_VTRAV_MIN " VTrav min:"
-#define MSG_AMAX " Amax "
-#define MSG_A_RETRACT " A-retrac.:"
-#define MSG_XSTEPS " Xpasos/mm:"
-#define MSG_YSTEPS " Ypasos/mm:"
-#define MSG_ZSTEPS " Zpasos/mm:"
-#define MSG_ESTEPS " Epasos/mm:"
-#define MSG_MAIN_WIDE " Menu Principal  \003"
-#define MSG_RECTRACT_WIDE " Retraer         \x7E"
-#define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
-#define MSG_TEMPERATURE_RTN  " Temperatura     \003"
-#define MSG_MOTION_WIDE " Movimiento      \x7E"
-#define MSG_STORE_EPROM " Guardar Memoria"
-#define MSG_LOAD_EPROM " Cargar Memoria"
-#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
-#define MSG_REFRESH "\004Volver a cargar"
-#define MSG_WATCH " Monitorizar \003"
-#define MSG_PREPARE " Preparar \x7E"
-#define MSG_PREPARE_ALT " Preparar \003"
-#define MSG_CONTROL_ARROW " Control  \x7E"
-#define MSG_RETRACT_ARROW " Retraer  \x7E"
-#define MSG_TUNE " Ajustar \x7E"
-#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
-#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
-#define MSG_STOP_PRINT " Detener Impresion \x7E"
-#define MSG_CARD_MENU " Menu de SD    \x7E"
-#define MSG_NO_CARD " No hay Tarjeta SD"
-#define MSG_DWELL "Reposo..."
-#define MSG_USERWAIT "Esperando Ordenes..."
-#define MSG_NO_MOVE "Sin movimiento"
-#define MSG_PART_RELEASE "Desacople Parcial"
-#define MSG_KILLED "PARADA DE EMERGENCIA. "
-#define MSG_STOPPED "PARADA. "
-#define MSG_STEPPER_RELEASED "Desacoplada."
-#define MSG_CONTROL_RETRACT  " Retraer mm:"
-#define MSG_CONTROL_RETRACTF " Retraer  F:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
-#define MSG_AUTORETRACT " AutoRetr.:"
-#define MSG_FILAMENTCHANGE "Change filament"
-// Serial Console Messages
-
-#define MSG_Enqueing "En cola \""
-#define MSG_POWERUP "PowerUp"
-#define MSG_EXTERNAL_RESET " Reset Externo"
-#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
-#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
-#define MSG_SOFTWARE_RESET " Reset por Software"
-#define MSG_MARLIN "Marlin "
-#define MSG_AUTHOR " | Autor: "
-#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
-#define MSG_FREE_MEMORY " Memoria libre: "
-#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-#define MSG_OK "ok"
-#define MSG_FILE_SAVED "Guardado."
-#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
-#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
-#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
-#define MSG_FILE_PRINTED "Impresion terminada"
-#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
-#define MSG_END_FILE_LIST "Fin de la lista de archivos"
-#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
-#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
-#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
-#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
-#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
-#define MSG_HEATING "Calentando..."
-#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
-#define MSG_BED_HEATING "Calentando la base."
-#define MSG_BED_DONE "Base Caliente."
-#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X " Cuenta X:"
-#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
-#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
-#define MSG_RESEND "Reenviar:"
-#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
-#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
-#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
-#define MSG_X_MIN "x_min: "
-#define MSG_X_MAX "x_max: "
-#define MSG_Y_MIN "y_min: "
-#define MSG_Y_MAX "y_max: "
-#define MSG_Z_MIN "z_min: "
-#define MSG_M119_REPORT "Comprobando fines de carrera."
-#define MSG_ENDSTOP_HIT "PULSADO"
-#define MSG_ENDSTOP_OPEN "abierto"
-#define MSG_HOTEND_OFFSET "Hotend offsets:"
-        
-#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
-#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
-#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
-#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
-#define MSG_SD_CARD_OK "Tarjeta SD OK"
-#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
-#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
-#define MSG_SD_FILE_OPENED "Archivo abierto:"
-#define MSG_SD_SIZE " Tamaño:"
-#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
-#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
-#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
-#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
-#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
-#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
-
-#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
-#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
-#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
-#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
-
-#endif
-
-#if LANGUAGE_CHOICE == 6
-
-// LCD Menu Messages
-#define WELCOME_MSG MACHINE_NAME			" Готов"
-#define MSG_SD_INSERTED						"Карта вставлена"
-#define MSG_SD_REMOVED						"Карта извлечена"
-#define MSG_MAIN							" Меню              \003"
-#define MSG_AUTOSTART						" Автостарт          "
-#define MSG_DISABLE_STEPPERS				" Выключить двигатели"
-#define MSG_AUTO_HOME						" Парковка           "
-#define MSG_SET_ORIGIN						" Запомнить ноль     "
-#define MSG_PREHEAT_PLA						" Преднагрев PLA     "
-#define MSG_PREHEAT_PLA_SETTINGS			" Настр. преднагр.PLA"
-#define MSG_PREHEAT_ABS						" Преднагрев ABS     "
-#define MSG_PREHEAT_ABS_SETTINGS			" Настр. преднагр.ABS"
-#define MSG_COOLDOWN						" Охлаждение         "
-#define MSG_EXTRUDE							" Экструзия          "
-#define MSG_RETRACT							" Откат"
-#define MSG_MOVE_AXIS						" Движение по осям  \x7E"
-#define MSG_SPEED							" Скорость:"
-#define MSG_NOZZLE							" \002 Фильера:"
-#define MSG_NOZZLE1							" \002 Фильера2:"
-#define MSG_NOZZLE2							" \002 Фильера3:"
-#define MSG_BED								" \002 Кровать:"
-#define MSG_FAN_SPEED						" Куллер:"
-#define MSG_FLOW							" Поток:"
-#define MSG_CONTROL							" Настройки \003"
-#define MSG_MIN								" \002 Минимум:"
-#define MSG_MAX								" \002 Максимум:"
-#define MSG_FACTOR							" \002 Фактор:"
-#define MSG_AUTOTEMP						" Autotemp:"
-#define MSG_ON								"Вкл. "
-#define MSG_OFF								"Выкл. "
-#define MSG_PID_P							" PID-P: "
-#define MSG_PID_I							" PID-I: "
-#define MSG_PID_D							" PID-D: "
-#define MSG_PID_C							" PID-C: "
-#define MSG_ACC								" Acc:"
-#define MSG_VXY_JERK						" Vxy-jerk: "
-#define MSG_VMAX							" Vmax "
-#define MSG_X								"x:"
-#define MSG_Y								"y:"
-#define MSG_Z								"z:"
-#define MSG_E								"e:"
-#define MSG_VMIN							" Vmin:"
-#define MSG_VTRAV_MIN						" VTrav min:"
-#define MSG_AMAX							" Amax "
-#define MSG_A_RETRACT						" A-retract:"
-#define MSG_XSTEPS							" X шаг/mm:"
-#define MSG_YSTEPS							" Y шаг/mm:"
-#define MSG_ZSTEPS							" Z шаг/mm:"
-#define MSG_ESTEPS							" E шаг/mm:"
-#define MSG_RECTRACT    					" Откат подачи      \x7E"
-#define MSG_TEMPERATURE  				" Температура       \x7E"
-#define MSG_MOTION						" Скорости          \x7E"
-#define MSG_STORE_EPROM						" Сохранить настройки"
-#define MSG_LOAD_EPROM						" Загрузить настройки"
-#define MSG_RESTORE_FAILSAFE				" Сброс настроек     "
-#define MSG_REFRESH							"\004Обновить           "
-#define MSG_WATCH							" Обзор             \003"
-#define MSG_PREPARE							" Действия          \x7E"
-#define MSG_TUNE					" Настройки         \x7E"
-#define MSG_PAUSE_PRINT						" Пауза печати      \x7E"
-#define MSG_RESUME_PRINT					" Продолжить печать \x7E"
-#define MSG_STOP_PRINT						" Остановить печать \x7E"
-#define MSG_CARD_MENU						" Меню карты        \x7E"
-#define MSG_NO_CARD							" Нет карты"
-#define MSG_DWELL							"Сон..."
-#define MSG_USERWAIT						"Нажмите для продолж."
-#define MSG_NO_MOVE							"Нет движения.       "
-#define MSG_PART_RELEASE					" Извлечение принта  "
-#define MSG_KILLED							"УБИТО. "
-#define MSG_STOPPED							"ОСТАНОВЛЕНО. "
-#define MSG_CONTROL_RETRACT					" Откат mm:"
-#define MSG_CONTROL_RETRACTF				" Откат  F:"
-#define MSG_CONTROL_RETRACT_ZLIFT			" Прыжок mm:"
-#define MSG_CONTROL_RETRACT_RECOVER			" Возврат +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF		" Возврат  F:"
-#define MSG_AUTORETRACT						" АвтоОткат:"
-#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-#define MSG_Enqueing						"Запланировано \""
-#define MSG_POWERUP							"Включение питания"
-#define MSG_EXTERNAL_RESET					" Внешний сброс"
-#define MSG_BROWNOUT_RESET					" Brown out сброс"
-#define MSG_WATCHDOG_RESET					" Watchdog сброс"
-#define MSG_SOFTWARE_RESET					" программный сброс"
-#define MSG_MARLIN							"Marlin "
-#define MSG_AUTHOR							" | Автор: "
-#define MSG_CONFIGURATION_VER				" Последнее обновление: "
-#define MSG_FREE_MEMORY						" Памяти свободно: "
-#define MSG_PLANNER_BUFFER_BYTES			"  Буффер очереди команд Bytes: "
-#define MSG_OK								"ok"
-#define MSG_FILE_SAVED						"Файл записан."
-#define MSG_ERR_LINE_NO						"Номен строки это не последняя строка+1, последняя строка:"
-#define MSG_ERR_CHECKSUM_MISMATCH			"контрольная сумма не совпадает, последняя строка:"
-#define MSG_ERR_NO_CHECKSUM					"нет контрольной суммы для строки, последняя строка:"
-#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM	"нет строки для контрольной суммы, последняя строка:"
-#define MSG_FILE_PRINTED					"Печать файла завершена"
-#define MSG_BEGIN_FILE_LIST					"Список файлов"
-#define MSG_END_FILE_LIST					"Конец списка файлов"
-#define MSG_M104_INVALID_EXTRUDER			"M104 ошибка экструдера "
-#define MSG_M105_INVALID_EXTRUDER			"M105 ошибка экструдера "
-#define MSG_M218_INVALID_EXTRUDER			"M218 ошибка экструдера "
-#define MSG_ERR_NO_THERMISTORS				"Нет термистра - нет температуры"
-#define MSG_M109_INVALID_EXTRUDER			"M109 ошибка экструдера "
-#define MSG_HEATING							"Нагрев...  "
-#define MSG_HEATING_COMPLETE				"Наргето.    "
-#define MSG_BED_HEATING						"Нагрев стола...     "
-#define MSG_BED_DONE						"Стол нагрет.        "
-#define MSG_M115_REPORT						"FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-#define MSG_COUNT_X							" Count X:"
-#define MSG_ERR_KILLED						"Принтер остановлен. вызов kill() !!"
-#define MSG_ERR_STOPPED						"Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
-#define MSG_RESEND							"Переотправка:"
-#define MSG_UNKNOWN_COMMAND					"Неизвестная команда:\""
-#define MSG_ACTIVE_EXTRUDER					"Активный экструдер: "
-#define MSG_INVALID_EXTRUDER				"Ошибка экструдера"
-#define MSG_X_MIN							"x_min:"
-#define MSG_X_MAX							"x_max:"
-#define MSG_Y_MIN							"y_min:"
-#define MSG_Y_MAX							"y_max:"
-#define MSG_Z_MIN							"z_min:"
-#define MSG_Z_MAX							"z_max:"
-#define MSG_M119_REPORT						"Статус концевиков"
-#define MSG_ENDSTOP_HIT						"Срабатывание концевика"
-#define MSG_ENDSTOP_OPEN					"Концевик освобожден"
-#define MSG_HOTEND_OFFSET					"Hotend offsets:"
-#define MSG_SD_CANT_OPEN_SUBDIR				"Не открыть папку"
-#define MSG_SD_INIT_FAIL					"Ошибка инициализации SD"
-#define MSG_SD_VOL_INIT_FAIL				"Ошибка инициализации раздела"
-#define MSG_SD_OPENROOT_FAIL				"Не прочесть содержимое корня"
-#define MSG_SD_CARD_OK						"SD карта в порядке"
-#define MSG_SD_WORKDIR_FAIL					"не открыть рабочую папку"
-#define MSG_SD_OPEN_FILE_FAIL				"Ошибка чтения, файл: "
-#define MSG_SD_FILE_OPENED					"Файл открыт:"
-#define MSG_SD_SIZE							" Размер:"
-#define MSG_SD_FILE_SELECTED				"Файл выбран"
-#define MSG_SD_WRITE_TO_FILE				"Запись в файл: "
-#define MSG_SD_PRINTING_BYTE				"SD печать byte "
-#define MSG_SD_NOT_PRINTING					"нет SD печати"
-#define MSG_SD_ERR_WRITE_TO_FILE			"ошибка записи в файл"
-#define MSG_SD_CANT_ENTER_SUBDIR			"Не зайти в папку:"
-#define MSG_STEPPER_TO_HIGH					"Частота шагов очень высока : "
-#define MSG_ENDSTOPS_HIT					"концевик сработал: "
-#define MSG_ERR_COLD_EXTRUDE_STOP			" защита холодной экструзии"
-#define MSG_ERR_LONG_EXTRUDE_STOP			" защита превышения длинны экструзии"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 7
-
-	// LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " Pronto."
-	#define MSG_SD_INSERTED          "SD Card inserita"
-	#define MSG_SD_REMOVED           "SD Card rimossa"
-	#define MSG_MAIN                 "Menu principale"
-	#define MSG_AUTOSTART            "Autostart"
-	#define MSG_DISABLE_STEPPERS     "Disabilita Motori"
-	#define MSG_AUTO_HOME            "Auto Home"
-	#define MSG_SET_ORIGIN           "Imposta Origine"
-	#define MSG_PREHEAT_PLA          "Preriscalda PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
-	#define MSG_PREHEAT_ABS          "Preriscalda ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
-	#define MSG_COOLDOWN             "Rafredda"
-	#define MSG_EXTRUDE              "Estrudi"
-	#define MSG_RETRACT              "Ritrai"
-	#define MSG_MOVE_AXIS            "Muovi Asse"
-	#define MSG_SPEED                "Velcità"
-	#define MSG_NOZZLE               "Ugello"
-	#define MSG_NOZZLE1              "Ugello2"
-	#define MSG_NOZZLE2              "Ugello3"
-	#define MSG_BED                  "Piatto"
-	#define MSG_FAN_SPEED            "Ventola"
-	#define MSG_FLOW                 "Flusso"
-	#define MSG_CONTROL              "Controllo"
-	#define MSG_MIN                  " \002 Min:"
-	#define MSG_MAX                  " \002 Max:"
-	#define MSG_FACTOR               " \002 Fact:"
-	#define MSG_AUTOTEMP             "Autotemp"
-	#define MSG_ON                   "On "
-	#define MSG_OFF                  "Off"
-	#define MSG_PID_P                "PID-P"
-	#define MSG_PID_I                "PID-I"
-	#define MSG_PID_D                "PID-D"
-	#define MSG_PID_C                "PID-C"
-	#define MSG_ACC                  "Accel"
-	#define MSG_VXY_JERK             "Vxy-jerk"
-	#define MSG_VMAX                 "Vmax"
-	#define MSG_X                    "x"
-	#define MSG_Y                    "y"
-	#define MSG_Z                    "z"
-	#define MSG_E                    "e"
-	#define MSG_VMIN                 "Vmin"
-	#define MSG_VTRAV_MIN            "VTrav min"
-	#define MSG_AMAX                 "Amax"
-	#define MSG_A_RETRACT            "A-retract"
-	#define MSG_XSTEPS               "Xpassi/mm"
-	#define MSG_YSTEPS               "Ypassi/mm"
-	#define MSG_ZSTEPS               "Zpassi/mm"
-	#define MSG_ESTEPS               "Epassi/mm"
-	#define MSG_RECTRACT             "Ritrai"
-	#define MSG_TEMPERATURE          "Temperatura"
-	#define MSG_MOTION               "Movimento"
-	#define MSG_STORE_EPROM          "Salva in EEPROM"
-	#define MSG_LOAD_EPROM           "Carica da EEPROM"
-	#define MSG_RESTORE_FAILSAFE     "Impostaz. default"
-	#define MSG_REFRESH              "Aggiorna"
-	#define MSG_WATCH                "Guarda"
-	#define MSG_PREPARE              "Prepara"
-	#define MSG_TUNE                 "Adatta"
-	#define MSG_PAUSE_PRINT          "Pausa"
-	#define MSG_RESUME_PRINT         "Riprendi Stampa"
-	#define MSG_STOP_PRINT           "Arresta Stampa"
-	#define MSG_CARD_MENU            "SD Card Menu"
-	#define MSG_NO_CARD              "No SD Card"
-	#define MSG_DWELL                "Sospensione..."
-	#define MSG_USERWAIT             "Attendi Utente..."
-	#define MSG_RESUMING             "Riprendi Stampa"
-	#define MSG_NO_MOVE              "Nessun Movimento."
-	#define MSG_KILLED               "UCCISO. "
-	#define MSG_STOPPED              "ARRESTATO. "
-	#define MSG_CONTROL_RETRACT      "Ritrai mm"
-	#define MSG_CONTROL_RETRACTF     "Ritrai  F"
-	#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
-	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
-	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
-	#define MSG_AUTORETRACT          "AutoArretramento"
-	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
-	#define MSG_FILAMENTCHANGE       "Cambia filamento"
-	#define MSG_INIT_SDCARD          "Iniz. SD-Card"
-	#define MSG_CNG_SDCARD           "Cambia SD-Card"
-
-	// Serial Console Messages
-
-	#define MSG_Enqueing             "accodamento \""
-	#define MSG_POWERUP              "Accensione"
-	#define MSG_EXTERNAL_RESET       " Reset Esterno"
-	#define MSG_BROWNOUT_RESET       " Brown out Reset"
-	#define MSG_WATCHDOG_RESET       " Watchdog Reset"
-	#define MSG_SOFTWARE_RESET       " Software Reset"
-	#define MSG_MARLIN               "Marlin "
-	#define MSG_AUTHOR               " | Autore: "
-	#define MSG_CONFIGURATION_VER    " Ultimo Aggiornamento: "
-	#define MSG_FREE_MEMORY          " Memoria Libera: "
-	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-	#define MSG_OK                   "ok"
-	#define MSG_FILE_SAVED           "File Salvato."
-	#define MSG_ERR_LINE_NO          "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
-	#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
-	#define MSG_ERR_NO_CHECKSUM      "Nessun Checksum con Numero di Linea, Ultima Linea: "
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
-	#define MSG_FILE_PRINTED         "File stampato"
-	#define MSG_BEGIN_FILE_LIST      "Inizio Lista File"
-	#define MSG_END_FILE_LIST        "Fine Lista File"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
-	#define MSG_ERR_NO_THERMISTORS   "Nessun Termistore - nessuna temperatura"
-	#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
-	#define MSG_HEATING              "Riscaldamento..."
-	#define MSG_HEATING_COMPLETE     "Stampante Calda."
-	#define MSG_BED_HEATING          "Riscaldamento Piatto."
-	#define MSG_BED_DONE             "Piatto Pronto."
-	#define MSG_M115_REPORT          "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X              " Calcola X: "
-	#define MSG_ERR_KILLED           "Stampante Calda. kill() chiamata !!"
-	#define MSG_ERR_STOPPED          "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
-	#define MSG_RESEND               "Reinviato:"
-	#define MSG_UNKNOWN_COMMAND      "Comando sconosciuto: \""
-	#define MSG_ACTIVE_EXTRUDER      "Attiva Estrusore: "
-	#define MSG_INVALID_EXTRUDER     "Estrusore non valido"
-	#define MSG_X_MIN                "x_min: "
-	#define MSG_X_MAX                "x_max: "
-	#define MSG_Y_MIN                "y_min: "
-	#define MSG_Y_MAX                "y_max: "
-	#define MSG_Z_MIN                "z_min: "
-	#define MSG_Z_MAX                "z_max: "
-	#define MSG_M119_REPORT          "Segnalazione stato degli endstop"
-	#define MSG_ENDSTOP_HIT          "INNESCATO"
-	#define MSG_ENDSTOP_OPEN         "aperto"
-	#define MSG_HOTEND_OFFSET        "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR  "Impossibile aprire sottocartella"
-	#define MSG_SD_INIT_FAIL         "Fallita Inizializzazione SD"
-	#define MSG_SD_VOL_INIT_FAIL     "Fallito il montaggio del Volume"
-	#define MSG_SD_OPENROOT_FAIL     "Fallita l'apertura Cartella Principale"
-	#define MSG_SD_CARD_OK           "SD card ok"
-	#define MSG_SD_WORKDIR_FAIL      "Fallita l'apertura Cartella di Lavoro"
-	#define MSG_SD_OPEN_FILE_FAIL    "Fallita l'apertura del File: "
-	#define MSG_SD_FILE_OPENED       "File aperto: "
-	#define MSG_SD_SIZE              " Dimensione: "
-	#define MSG_SD_FILE_SELECTED     "File selezionato"
-	#define MSG_SD_WRITE_TO_FILE     "Scrittura su file: "
-	#define MSG_SD_PRINTING_BYTE     "Si sta scrivendo il byte su SD "
-	#define MSG_SD_NOT_PRINTING      "Non si sta scrivendo su SD"
-	#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
-
-	#define MSG_STEPPER_TO_HIGH      "Steprate troppo alto: "
-	#define MSG_ENDSTOPS_HIT         "Raggiunto il fondo carrello: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
-
-#endif
-
-
-#if LANGUAGE_CHOICE == 8
-
-// LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " Pronta."
-	#define MSG_SD_INSERTED "Cartao SD inserido"
-	#define MSG_SD_REMOVED "Cartao SD removido"
-	#define MSG_MAIN " Menu Principal \003"
-	#define MSG_AUTOSTART " Autostart"
-	#define MSG_DISABLE_STEPPERS " Apagar Motores"
-	#define MSG_AUTO_HOME " Ir para Origen"
-	#define MSG_SET_ORIGIN " Estabelecer Origen"
-	#define MSG_PREHEAT_PLA " pre-aquecer PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
-	#define MSG_PREHEAT_ABS " pre-aquecer ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
-	#define MSG_COOLDOWN " Esfriar"
-	#define MSG_EXTRUDE " Extrudar"
-	#define MSG_RETRACT " Retrair"
-	#define MSG_PREHEAT_PLA " pre-aquecer PLA"
-	#define MSG_PREHEAT_ABS " pre-aquecer ABS"
-	#define MSG_MOVE_AXIS " Mover eixo      \x7E"
-	#define MSG_SPEED " Velocidade:"
-	#define MSG_NOZZLE " \002Nozzle:"
-	#define MSG_NOZZLE1 " \002Nozzle2:"
-	#define MSG_NOZZLE2 " \002Nozzle3:"
-	#define MSG_BED " \002Base:"
-	#define MSG_FAN_SPEED " Velocidade Ventoinha:"
-	#define MSG_FLOW " Fluxo:"
-	#define MSG_CONTROL " Controle \003"
-	#define MSG_MIN " \002 Min:"
-	#define MSG_MAX " \002 Max:"
-	#define MSG_FACTOR " \002 Fact:"
-	#define MSG_AUTOTEMP " Autotemp:"
-	#define MSG_ON "On "
-	#define MSG_OFF "Off"
-	#define MSG_PID_P " PID-P: "
-	#define MSG_PID_I " PID-I: "
-	#define MSG_PID_D " PID-D: "
-	#define MSG_PID_C " PID-C: "
-	#define MSG_ACC  " Acc:"
-	#define MSG_VXY_JERK " Vxy-jerk: "
-	#define MSG_VMAX " Vmax "
-	#define MSG_X "x:"
-	#define MSG_Y "y:"
-	#define MSG_Z "z:"
-	#define MSG_E "e:"
-	#define MSG_VMIN " Vmin:"
-	#define MSG_VTRAV_MIN " VTrav min:"
-	#define MSG_AMAX " Amax "
-	#define MSG_A_RETRACT " A-retract:"
-	#define MSG_XSTEPS " Xpasso/mm:"
-	#define MSG_YSTEPS " Ypasso/mm:"
-	#define MSG_ZSTEPS " Zpasso/mm:"
-	#define MSG_ESTEPS " Epasso/mm:"
-	#define MSG_MAIN_WIDE " Menu Principal  \003"
-	#define MSG_RECTRACT_WIDE " Retrair    \x7E"
-	#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
-	#define MSG_TEMPERATURE_RTN " Temperatura  \003"
-	#define MSG_MOTION_WIDE " Movimento     \x7E"
-	#define MSG_STORE_EPROM " Guardar memoria"
-	#define MSG_LOAD_EPROM " Carregar memoria"
-	#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
-	#define MSG_REFRESH "\004Recarregar"
-	#define MSG_WATCH " Monitorar   \003"
-	#define MSG_PREPARE " Preparar \x7E"
-	#define MSG_PREPARE_ALT " Preparar \003"
-	#define MSG_CONTROL_ARROW " Controle \x7E"
-	#define MSG_RETRACT_ARROW " Retrair \x7E"
-	#define MSG_TUNE " Tune    \x7E"
-	#define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
-	#define MSG_RESUME_PRINT " Resumir Impressao \x7E"
-	#define MSG_STOP_PRINT " Parar Impressao   \x7E"
-	#define MSG_CARD_MENU " Menu cartao SD    \x7E"
-	#define MSG_NO_CARD " Sem cartao SD"
-	#define MSG_DWELL "Repouso..."
-	#define MSG_USERWAIT "Esperando Ordem..."
-	#define MSG_NO_MOVE "Sem movimento."
-	#define MSG_PART_RELEASE "Lancamento Parcial"
-	#define MSG_KILLED "PARADA DE EMERGENCIA. "
-	#define MSG_STOPPED "PARADA. "
-	#define MSG_STEPPER_RELEASED "Lancado."
-	#define MSG_CONTROL_RETRACT  " Retrair mm:"
-	#define MSG_CONTROL_RETRACTF " Retrair  F:"
-	#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
-	#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
-	#define MSG_CONTROL_RETRACT_RECOVERF " DesRet  F:"
-	#define MSG_AUTORETRACT " AutoRetr.:"
-        #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
-        #define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-	#define MSG_Enqueing "enqueing \""
-	#define MSG_POWERUP "PowerUp"
-	#define MSG_EXTERNAL_RESET " Reset Externo"
-	#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
-	#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
-	#define MSG_SOFTWARE_RESET " Reset por Software"
-	#define MSG_MARLIN "Marlin "
-	#define MSG_AUTHOR " | Author: "
-	#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
-	#define MSG_FREE_MEMORY " memoria Livre: "
-	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-	#define MSG_OK "ok"
-	#define MSG_FILE_SAVED "Guardado."
-	#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
-	#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
-	#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
-	#define MSG_FILE_PRINTED "Impressao terminada"
-	#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
-	#define MSG_END_FILE_LIST "Fim da lista de arquivos"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
-	#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
-	#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
-	#define MSG_HEATING "Aquecendo..."
-	#define MSG_HEATING_COMPLETE "Aquecido."
-	#define MSG_BED_HEATING "Aquecendo a Base."
-	#define MSG_BED_DONE "Base quente."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X " Conta X:"
-	#define MSG_ERR_KILLED "Impressora parada com kill() !!"
-	#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
-	#define MSG_RESEND "Reenviar:"
-	#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
-	#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
-	#define MSG_INVALID_EXTRUDER "Extrusor invalido"
-	#define MSG_X_MIN "x_min: "
-	#define MSG_X_MAX "x_max: "
-	#define MSG_Y_MIN "y_min: "
-	#define MSG_Y_MAX "y_max: "
-	#define MSG_Z_MIN "z_min: "
-	#define MSG_Z_MAX "z_max: "
-	#define MSG_M119_REPORT "Relatando estado do ponto final"
-	#define MSG_ENDSTOP_HIT "PULSADO"
-	#define MSG_ENDSTOP_OPEN "Aberto"
-	#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
-	#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
-	#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
-	#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
-	#define MSG_SD_CARD_OK "cartao SD ok"
-	#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
-	#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
-	#define MSG_SD_FILE_OPENED "Arquivo aberto:"
-	#define MSG_SD_SIZE " Size:"
-	#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
-	#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
-	#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
-	#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
-	#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
-
-	#define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
-	#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
-
-
-#endif
-
-
-
-#if LANGUAGE_CHOICE == 9
-
-// Finnish
-
-// LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " valmis"
-	#define MSG_SD_INSERTED "Kortti asetettu"
-	#define MSG_SD_REMOVED "Kortti poistettu"
-	#define MSG_MAIN "Palaa"
-	#define MSG_AUTOSTART "Automaatti"
-	#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
-	#define MSG_AUTO_HOME "Aja referenssiin"
-	#define MSG_SET_ORIGIN "Aseta origo"
-	#define MSG_PREHEAT_PLA "Esilammita PLA"
-	#define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
-	#define MSG_PREHEAT_ABS "Esilammita ABS"
-	#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
-	#define MSG_COOLDOWN "Jaahdyta"
-	#define MSG_EXTRUDE "Pursota"
-	#define MSG_RETRACT "Veda takaisin"
-	#define MSG_MOVE_AXIS "Liikuta akseleita"
-	#define MSG_SPEED "Nopeus"
-	#define MSG_NOZZLE "Suutin"
-	#define MSG_NOZZLE1 "Suutin2"
-	#define MSG_NOZZLE2 "Suutin3"
-	#define MSG_BED "Alusta"
-	#define MSG_FAN_SPEED "Tuul. nopeus"
-	#define MSG_FLOW "Virtaus"
-	#define MSG_CONTROL "Kontrolli"
-	#define MSG_MIN " \002 Min"
-	#define MSG_MAX " \002 Max"
-	#define MSG_FACTOR " \002 Kerr"
-	#define MSG_AUTOTEMP "Autotemp"
-	#define MSG_ON "On "
-	#define MSG_OFF "Off"
-	#define MSG_PID_P "PID-P"
-	#define MSG_PID_I "PID-I"
-	#define MSG_PID_D "PID-D"
-	#define MSG_PID_C "PID-C"
-	#define MSG_ACC  "Kiihtyv"
-	#define MSG_VXY_JERK "Vxy-jerk"
-	#define MSG_VMAX "Vmax "
-	#define MSG_X "x"
-	#define MSG_Y "y"
-	#define MSG_Z "z"
-	#define MSG_E "e"
-	#define MSG_VMIN "Vmin"
-	#define MSG_VTRAV_MIN "VLiike min"
-	#define MSG_AMAX "Amax "
-	#define MSG_A_RETRACT "A-peruuta"
-	#define MSG_XSTEPS "Xsteps/mm"
-	#define MSG_YSTEPS "Ysteps/mm"
-	#define MSG_ZSTEPS "Zsteps/mm"
-	#define MSG_ESTEPS "Esteps/mm"
-	#define MSG_RECTRACT "Veda takaisin"
-	#define MSG_TEMPERATURE "Lampotila"
-	#define MSG_MOTION "Liike"
-	#define MSG_STORE_EPROM "Tallenna muistiin"
-	#define MSG_LOAD_EPROM "Lataa muistista"
-	#define MSG_RESTORE_FAILSAFE "Palauta oletus"
-	#define MSG_REFRESH "Paivita"
-	#define MSG_WATCH "Seuraa"
-	#define MSG_PREPARE "Valmistele"
-	#define MSG_TUNE "Saada"
-	#define MSG_PAUSE_PRINT "Keskeyta tulostus"
-	#define MSG_RESUME_PRINT "Jatka tulostusta"
-	#define MSG_STOP_PRINT "Pysayta tulostus"
-	#define MSG_CARD_MENU "Korttivalikko"
-	#define MSG_NO_CARD "Ei korttia"
-	#define MSG_DWELL "Nukkumassa..."
-	#define MSG_USERWAIT "Odotetaan valintaa..."
-	#define MSG_RESUMING "Jatketaan tulostusta"
-	#define MSG_NO_MOVE "Ei liiketta."
-	#define MSG_KILLED "KILLED. "
-	#define MSG_STOPPED "STOPPED. "
-	#define MSG_CONTROL_RETRACT  "Veda mm"
-	#define MSG_CONTROL_RETRACTF "Veda F"
-	#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
-	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
-	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
-	#define MSG_AUTORETRACT "AutoVeto."
-	#define MSG_FILAMENTCHANGE "Change filament"
-
-// Serial Console Messages
-
-	#define MSG_Enqueing "jonoon \""
-	#define MSG_POWERUP "Kaynnistys"
-	#define MSG_EXTERNAL_RESET " Ulkoinen Reset"
-	#define MSG_BROWNOUT_RESET " Alajannite Reset"
-	#define MSG_WATCHDOG_RESET " Vahtikoira Reset"
-	#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
-	#define MSG_MARLIN "Marlin "
-	#define MSG_AUTHOR " | Author: "
-	#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
-	#define MSG_FREE_MEMORY " Vapaata muistia: "
-	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
-	#define MSG_OK "ok"
-	#define MSG_FILE_SAVED "Tiedosto tallennettu."
-	#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
-	#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
-	#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
-	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
-	#define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
-	#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
-	#define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
-	#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
-	#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
-	#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
-	#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
-	#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
-	#define MSG_HEATING "Lammitan..."
-	#define MSG_HEATING_COMPLETE "Lammitys valmis."
-	#define MSG_BED_HEATING "Alusta lampiaa."
-	#define MSG_BED_DONE "Alusta valmis."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
-	#define MSG_COUNT_X " Laskuri X: "
-	#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
-	#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
-	#define MSG_RESEND "Uudelleenlahetys: "
-	#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
-	#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
-	#define MSG_INVALID_EXTRUDER "Virheellinen suutin"
-	#define MSG_X_MIN "x_min: "
-	#define MSG_X_MAX "x_max: "
-	#define MSG_Y_MIN "y_min: "
-	#define MSG_Y_MAX "y_max: "
-	#define MSG_Z_MIN "z_min: "
-	#define MSG_Z_MAX "z_max: "
-	#define MSG_M119_REPORT "Rajakytkimien tilaraportti"
-	#define MSG_ENDSTOP_HIT "AKTIIVISENA"
-	#define MSG_ENDSTOP_OPEN "avoinna"
-	#define MSG_HOTEND_OFFSET "Hotend offsets:"
-
-	#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
-	#define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
-	#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
-	#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
-	#define MSG_SD_CARD_OK "SD kortti ok"
-	#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
-	#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
-	#define MSG_SD_FILE_OPENED "Tiedosto avattu: "
-	#define MSG_SD_SIZE " Koko: "
-	#define MSG_SD_FILE_SELECTED "Tiedosto valittu"
-	#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
-	#define MSG_SD_PRINTING_BYTE "SD tulostus byte "
-	#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
-	#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
-
-	#define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: "
-	#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
-
-#endif
-#endif // ifndef LANGUAGE_H
+#ifndef LANGUAGE_H
+#define LANGUAGE_H
+
+// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
+//
+//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" 
+//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
+
+// Languages
+// 1  English
+// 2  Polish
+// 3  French	(awaiting translation!)
+// 4  German
+// 5  Spanish
+// 6  Russian
+// 7  Italian
+// 8  Portuguese
+// 9  Finnish
+
+#ifndef LANGUAGE_CHOICE
+#define LANGUAGE_CHOICE 1  // Pick your language from the list above
+#endif
+
+#define PROTOCOL_VERSION "1.0"
+
+#if MOTHERBOARD == 7 || MOTHERBOARD == 71
+	#define MACHINE_NAME "Ultimaker"
+	#define FIRMWARE_URL "http://firmware.ultimaker.com"
+#else
+	#define MACHINE_NAME "Mendel"
+	#define FIRMWARE_URL "http://www.mendel-parts.com"
+#endif
+
+#define STRINGIFY_(n) #n
+#define STRINGIFY(n) STRINGIFY_(n)
+
+#if LANGUAGE_CHOICE == 1
+
+// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " Ready."
+	#define MSG_SD_INSERTED "Card inserted"
+	#define MSG_SD_REMOVED "Card removed"
+	#define MSG_MAIN "Main"
+	#define MSG_AUTOSTART "Autostart"
+	#define MSG_DISABLE_STEPPERS "Disable Steppers"
+	#define MSG_AUTO_HOME "Auto Home"
+	#define MSG_SET_ORIGIN "Set Origin"
+	#define MSG_PREHEAT_PLA "Preheat PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
+	#define MSG_PREHEAT_ABS "Preheat ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
+	#define MSG_COOLDOWN "Cooldown"
+	#define MSG_EXTRUDE "Extrude"
+	#define MSG_RETRACT "Retract"
+	#define MSG_MOVE_AXIS "Move Axis"
+	#define MSG_SPEED "Speed"
+	#define MSG_NOZZLE "Nozzle"
+	#define MSG_NOZZLE1 "Nozzle2"
+	#define MSG_NOZZLE2 "Nozzle3"
+	#define MSG_BED "Bed"
+	#define MSG_FAN_SPEED "Fan speed"
+	#define MSG_FLOW "Flow"
+	#define MSG_CONTROL "Control"
+	#define MSG_MIN " \002 Min"
+	#define MSG_MAX " \002 Max"
+	#define MSG_FACTOR " \002 Fact"
+	#define MSG_AUTOTEMP "Autotemp"
+	#define MSG_ON "On "
+	#define MSG_OFF "Off"
+	#define MSG_PID_P "PID-P"
+	#define MSG_PID_I "PID-I"
+	#define MSG_PID_D "PID-D"
+	#define MSG_PID_C "PID-C"
+	#define MSG_ACC  "Accel"
+	#define MSG_VXY_JERK "Vxy-jerk"
+	#define MSG_VMAX "Vmax "
+	#define MSG_X "x"
+	#define MSG_Y "y"
+	#define MSG_Z "z"
+	#define MSG_E "e"
+	#define MSG_VMIN "Vmin"
+	#define MSG_VTRAV_MIN "VTrav min"
+	#define MSG_AMAX "Amax "
+	#define MSG_A_RETRACT "A-retract"
+	#define MSG_XSTEPS "Xsteps/mm"
+	#define MSG_YSTEPS "Ysteps/mm"
+	#define MSG_ZSTEPS "Zsteps/mm"
+	#define MSG_ESTEPS "Esteps/mm"
+	#define MSG_RECTRACT "Rectract"
+	#define MSG_TEMPERATURE "Temperature"
+	#define MSG_MOTION "Motion"
+	#define MSG_STORE_EPROM "Store memory"
+	#define MSG_LOAD_EPROM "Load memory"
+	#define MSG_RESTORE_FAILSAFE "Restore Failsafe"
+	#define MSG_REFRESH "Refresh"
+	#define MSG_WATCH "Watch"
+	#define MSG_PREPARE "Prepare"
+	#define MSG_TUNE "Tune"
+	#define MSG_PAUSE_PRINT "Pause Print"
+	#define MSG_RESUME_PRINT "Resume Print"
+	#define MSG_STOP_PRINT "Stop Print"
+	#define MSG_CARD_MENU "Card Menu"
+	#define MSG_NO_CARD "No Card"
+	#define MSG_DWELL "Sleep..."
+	#define MSG_USERWAIT "Wait for user..."
+	#define MSG_RESUMING "Resuming print"
+	#define MSG_NO_MOVE "No move."
+	#define MSG_KILLED "KILLED. "
+	#define MSG_STOPPED "STOPPED. "
+	#define MSG_CONTROL_RETRACT  "Retract mm"
+	#define MSG_CONTROL_RETRACTF "Retract  F"
+	#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
+	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
+	#define MSG_AUTORETRACT "AutoRetr."
+	#define MSG_FILAMENTCHANGE "Change filament"
+	#define MSG_INIT_SDCARD "Init. SD-Card"	
+	#define MSG_CNG_SDCARD "Change SD-Card"
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "enqueing \""
+	#define MSG_POWERUP "PowerUp"
+	#define MSG_EXTERNAL_RESET " External Reset"
+	#define MSG_BROWNOUT_RESET " Brown out Reset"
+	#define MSG_WATCHDOG_RESET " Watchdog Reset"
+	#define MSG_SOFTWARE_RESET " Software Reset"
+	#define MSG_MARLIN "Marlin "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Last Updated: "
+	#define MSG_FREE_MEMORY " Free Memory: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Done saving file."
+	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
+	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
+	#define MSG_FILE_PRINTED "Done printing file"
+	#define MSG_BEGIN_FILE_LIST "Begin file list"
+	#define MSG_END_FILE_LIST "End file list"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+	#define MSG_HEATING "Heating..."
+	#define MSG_HEATING_COMPLETE "Heating done."
+	#define MSG_BED_HEATING "Bed Heating."
+	#define MSG_BED_DONE "Bed done."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Count X: "
+	#define MSG_ERR_KILLED "Printer halted. kill() called!"
+	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+	#define MSG_RESEND "Resend: "
+	#define MSG_UNKNOWN_COMMAND "Unknown command: \""
+	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+	#define MSG_INVALID_EXTRUDER "Invalid extruder"
+	#define MSG_X_MIN "x_min: "
+	#define MSG_X_MAX "x_max: "
+	#define MSG_Y_MIN "y_min: "
+	#define MSG_Y_MAX "y_max: "
+	#define MSG_Z_MIN "z_min: "
+	#define MSG_Z_MAX "z_max: "
+	#define MSG_M119_REPORT "Reporting endstop status"
+	#define MSG_ENDSTOP_HIT "TRIGGERED"
+	#define MSG_ENDSTOP_OPEN "open"
+	#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+	#define MSG_SD_INIT_FAIL "SD init fail"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
+	#define MSG_SD_CARD_OK "SD card ok"
+	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
+	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+	#define MSG_SD_FILE_OPENED "File opened: "
+	#define MSG_SD_SIZE " Size: "
+	#define MSG_SD_FILE_SELECTED "File selected"
+	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
+	#define MSG_SD_PRINTING_BYTE "SD printing byte "
+	#define MSG_SD_NOT_PRINTING "Not SD printing"
+	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+
+	#define MSG_STEPPER_TO_HIGH "Steprate to high: "
+	#define MSG_ENDSTOPS_HIT "endstops hit: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 2
+
+// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " Gotowe."
+	#define MSG_SD_INSERTED "Karta wlozona"
+	#define MSG_SD_REMOVED "Karta usunieta"
+	#define MSG_MAIN "Main"
+	#define MSG_AUTOSTART "Autostart"
+	#define MSG_DISABLE_STEPPERS "Wylacz silniki"
+	#define MSG_AUTO_HOME "Auto. poz. zerowa"
+	#define MSG_SET_ORIGIN "Ustaw punkt zerowy"
+	#define MSG_PREHEAT_PLA "Rozgrzej PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
+	#define MSG_PREHEAT_ABS "Rozgrzej ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
+	#define MSG_COOLDOWN "Chlodzenie"
+	#define MSG_EXTRUDE "Ekstruzja"
+	#define MSG_RETRACT "Cofanie"
+	#define MSG_MOVE_AXIS "Ruch osi"
+	#define MSG_SPEED "Predkosc"
+	#define MSG_NOZZLE "Dysza"
+	#define MSG_NOZZLE1 "Dysza2"
+	#define MSG_NOZZLE2 "Dysza3"
+	#define MSG_BED "Loze"
+	#define MSG_FAN_SPEED "Obroty wiatraka"
+	#define MSG_FLOW "Przeplyw"
+	#define MSG_CONTROL "Kontrola"
+	#define MSG_MIN " \002 Min"
+	#define MSG_MAX " \002 Max"
+	#define MSG_FACTOR " \002 Mnoznik"
+	#define MSG_AUTOTEMP "Auto. temp."
+	#define MSG_ON "Wl. "
+	#define MSG_OFF "Wyl."
+	#define MSG_PID_P "PID-P"
+	#define MSG_PID_I "PID-I"
+	#define MSG_PID_D "PID-D"
+	#define MSG_PID_C "PID-C"
+	#define MSG_ACC  "Acc"
+	#define MSG_VXY_JERK "Zryw Vxy"
+	#define MSG_VMAX "Vmax"
+	#define MSG_X "x"
+	#define MSG_Y "y"
+	#define MSG_Z "z"
+	#define MSG_E "e"
+	#define MSG_VMIN "Vmin"
+	#define MSG_VTRAV_MIN "Vskok min"
+	#define MSG_AMAX "Amax"
+	#define MSG_A_RETRACT "A-wycofanie"
+	#define MSG_XSTEPS "krokiX/mm"
+	#define MSG_YSTEPS "krokiY/mm"
+	#define MSG_ZSTEPS "krokiZ/mm"
+	#define MSG_ESTEPS "krokiE/mm"
+	#define MSG_RECTRACT "Wycofanie"
+	#define MSG_TEMPERATURE "Temperatura"
+	#define MSG_MOTION "Ruch"
+	#define MSG_STORE_EPROM "Zapisz w pamieci"
+	#define MSG_LOAD_EPROM "Wczytaj z pamieci"
+	#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
+	#define MSG_REFRESH "\004Odswiez"
+	#define MSG_WATCH "Obserwuj"
+	#define MSG_PREPARE "Przygotuj"
+	#define MSG_CONTROL "Kontroluj"
+	#define MSG_TUNE "Strojenie"
+	#define MSG_PAUSE_PRINT "Pauza"
+	#define MSG_RESUME_PRINT "Wznowienie"
+	#define MSG_STOP_PRINT "Stop"
+	#define MSG_CARD_MENU "Menu SDCard"
+	#define MSG_NO_CARD "Brak karty"
+	#define MSG_DWELL "Uspij..."
+	#define MSG_USERWAIT "Czekaj na uzytkownika..."
+	#define MSG_RESUMING "Wznawiam drukowanie"
+	#define MSG_NO_MOVE "Brak ruchu."
+	#define MSG_PART_RELEASE "Czesciowe zwolnienie"
+	#define MSG_KILLED "Ubity. "
+	#define MSG_STOPPED "Zatrzymany. "
+	#define MSG_STEPPER_RELEASED "Zwolniony."
+	#define MSG_CONTROL_RETRACT  "Wycofaj mm"
+	#define MSG_CONTROL_RETRACTF "Wycofaj  F"
+	#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
+	#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
+	#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof.  F"
+	#define MSG_AUTORETRACT "Auto. wycofanie"
+	#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "Kolejkowanie \""
+	#define MSG_POWERUP "Zasilanie wlaczone"
+	#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
+	#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
+	#define MSG_WATCHDOG_RESET " Reset (watchdog)"
+	#define MSG_SOFTWARE_RESET " Reset (programowy)"
+	#define MSG_MARLIN "Marlin "
+	#define MSG_AUTHOR " | Autor: "
+	#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
+	#define MSG_FREE_MEMORY " Wolna pamiec: "
+	#define MSG_PLANNER_BUFFER_BYTES "  Bufor planisty krokow (w bajtach): "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Plik zapisany."
+	#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
+	#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
+	#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
+	#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
+	#define MSG_BEGIN_FILE_LIST "Start listy plikow"
+	#define MSG_END_FILE_LIST "Koniec listy plikow"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
+	#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
+	#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
+	#define MSG_HEATING "Nagrzewanie ekstrudera..."
+	#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
+	#define MSG_BED_HEATING "Nagrzewanie loza..."
+	#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Liczenie X: "
+	#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
+	#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
+	#define MSG_RESEND "Wyslij ponownie: "
+	#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
+	#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
+	#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
+	#define MSG_X_MIN "x_min: "
+	#define MSG_X_MAX "x_max: "
+	#define MSG_Y_MIN "y_min: "
+	#define MSG_Y_MAX "y_max: "
+	#define MSG_Z_MIN "z_min: "
+	#define MSG_Z_MAX "z_max: "
+	#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
+	#define MSG_ENDSTOP_HIT "WYZWOLONY"
+	#define MSG_ENDSTOP_OPEN "otwarty"
+	#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
+	#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
+	#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
+	#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
+	#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
+	#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
+	#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
+	#define MSG_SD_FILE_OPENED "Otwarto plik:"
+	#define MSG_SD_SIZE " Rozmiar:"
+	#define MSG_SD_FILE_SELECTED "Wybrano plik"
+	#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
+	#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
+	#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
+	#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
+
+	#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
+	#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 3
+
+#define WELCOME_MSG MACHINE_NAME " Pret."
+#define MSG_SD_INSERTED "Carte inseree"
+#define MSG_SD_REMOVED "Carte retiree"
+#define MSG_MAIN " Principal \003"
+#define MSG_AUTOSTART " Demarrage auto."
+#define MSG_DISABLE_STEPPERS " Desactiver moteurs"
+#define MSG_AUTO_HOME " Home auto."
+#define MSG_SET_ORIGIN " Regler origine"
+#define MSG_PREHEAT_PLA " Prechauffage PLA"
+#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
+#define MSG_PREHEAT_ABS " Prechauffage ABS"
+#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
+#define MSG_COOLDOWN " Refroidissement"
+#define MSG_EXTRUDE " Extrusion"
+#define MSG_RETRACT " Retractation"
+#define MSG_PREHEAT_PLA " Prechauffage PLA"
+#define MSG_PREHEAT_ABS " Prechauffage ABS"
+#define MSG_MOVE_AXIS " Deplacer axe \x7E"
+#define MSG_SPEED " Vitesse:"
+#define MSG_NOZZLE " \002Buse:"
+#define MSG_NOZZLE1 " \002Buse2:"
+#define MSG_NOZZLE2 " \002Buse3:"
+#define MSG_BED " \002Lit:"
+#define MSG_FAN_SPEED " Vitesse ventilateur:"
+#define MSG_FLOW " Flux:"
+#define MSG_CONTROL " Controle \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Facteur:"
+#define MSG_AUTOTEMP " Temp. Auto.:"
+#define MSG_ON "Marche "
+#define MSG_OFF "Arret"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " Vdepl min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retract:"
+#define MSG_XSTEPS " Xpas/mm:"
+#define MSG_YSTEPS " Ypas/mm:"
+#define MSG_ZSTEPS " Zpas/mm:"
+#define MSG_ESTEPS " Epas/mm:"
+#define MSG_MAIN_WIDE " Principal \003"
+#define MSG_RECTRACT_WIDE " Rectractater \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+#define MSG_TEMPERATURE_RTN " Temperature \003"
+#define MSG_MOTION_WIDE " Mouvement \x7E"
+#define MSG_STORE_EPROM " Sauvegarder memoire"
+#define MSG_LOAD_EPROM " Lire memoire"
+#define MSG_RESTORE_FAILSAFE " Restaurer memoire"
+#define MSG_REFRESH "\004Actualiser"
+#define MSG_WATCH " Surveiller \003"
+#define MSG_PREPARE " Preparer \x7E"
+#define MSG_PREPARE_ALT " Prepare \003"
+#define MSG_CONTROL_ARROW " Controle \x7E"
+#define MSG_RETRACT_ARROW " Retracter \x7E"
+#define MSG_TUNE " Regler \x7E"
+#define MSG_PAUSE_PRINT " Pause impression \x7E"
+#define MSG_RESUME_PRINT " Reprendre impression \x7E"
+#define MSG_STOP_PRINT " Arreter impression \x7E"
+#define MSG_CARD_MENU " Menu carte \x7E"
+#define MSG_NO_CARD " Pas de carte"
+#define MSG_DWELL "Repos..."
+#define MSG_USERWAIT "Attente de l'utilisateur..."
+#define MSG_NO_MOVE "Aucun mouvement."
+#define MSG_PART_RELEASE "Relache partielle"
+#define MSG_KILLED "TUE."
+#define MSG_STOPPED "STOPPE."
+#define MSG_STEPPER_RELEASED "RELACHE."
+#define MSG_CONTROL_RETRACT " Retractation mm:"
+#define MSG_CONTROL_RETRACTF " Retractation F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
+#define MSG_AUTORETRACT " Retract. Auto.:"
+#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+#define MSG_Enqueing "Mise en tampon \""
+#define MSG_POWERUP "Allumage"
+#define MSG_EXTERNAL_RESET " RAZ Externe"
+#define MSG_BROWNOUT_RESET " RAZ defaut alim."
+#define MSG_WATCHDOG_RESET " RAZ Watchdog"
+#define MSG_SOFTWARE_RESET " RAZ logicielle"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Auteur: "
+#define MSG_CONFIGURATION_VER " Derniere MaJ: "
+#define MSG_FREE_MEMORY " Memoire libre: "
+#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Fichier enregistre."
+#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
+#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
+#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
+#define MSG_FILE_PRINTED "Impression terminee"
+#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
+#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
+#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
+#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
+#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
+#define MSG_HEATING "En chauffe..."
+#define MSG_HEATING_COMPLETE "Chauffe terminee."
+#define MSG_BED_HEATING "Chauffe du lit."
+#define MSG_BED_DONE "Chauffe du lit terminee."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Compteur X: "
+#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
+#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
+#define MSG_RESEND "Renvoie: "
+#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
+#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
+#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
+#define MSG_X_MIN "x_min: "
+#define MSG_X_MAX "x_max: "
+#define MSG_Y_MIN "y_min: "
+#define MSG_Y_MAX "y_max: "
+#define MSG_Z_MIN "z_min: "
+#define MSG_Z_MAX "z_max: "
+#define MSG_M119_REPORT "Affichage du status des fin de course"
+#define MSG_ENDSTOP_HIT "DECLENCHE"
+#define MSG_ENDSTOP_OPEN "OUVERT"
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
+#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
+#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
+#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
+#define MSG_SD_CARD_OK "Carte SD Ok"
+#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
+#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
+#define MSG_SD_FILE_OPENED "Fichier ouvert: "
+#define MSG_SD_SIZE " Taille: "
+#define MSG_SD_FILE_SELECTED "Fichier selectionne"
+#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
+#define MSG_SD_PRINTING_BYTE "Octet impression SD "
+#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
+#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
+
+#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
+#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
+#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
+	
+#endif
+
+
+#if LANGUAGE_CHOICE == 4
+
+// LCD Menu Messages
+
+	#define WELCOME_MSG MACHINE_NAME " Bereit."
+
+	#define MSG_SD_INSERTED      "SDKarte erkannt"
+	#define MSG_SD_REMOVED       "SDKarte entfernt"
+	#define MSG_MAIN             "Hauptmneü"
+	#define MSG_AUTOSTART        "Autostart"
+	#define MSG_DISABLE_STEPPERS "Stepper abschalten"
+	#define MSG_AUTO_HOME        "Auto Nullpunkt"
+	#define MSG_SET_ORIGIN       "Setze Nullpunkt"
+	#define MSG_PREHEAT_PLA      "Vorwärmen PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
+	#define MSG_PREHEAT_ABS      "Vorwärmen ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
+	#define MSG_COOLDOWN         "Abkühlen"
+	#define MSG_EXTRUDE          "Extrude"
+	#define MSG_RETRACT          "Retract"
+	#define MSG_MOVE_AXIS        "Achsen bewegen"
+	#define MSG_SPEED            "Geschw"
+	#define MSG_NOZZLE           "Düse"
+	#define MSG_NOZZLE1          "Düse2"
+	#define MSG_NOZZLE2          "Düse3"
+	#define MSG_BED              "Bett"
+	#define MSG_FAN_SPEED        "Lüftergeschw."
+	#define MSG_FLOW             "Fluß"
+	#define MSG_CONTROL          "Einstellungen"
+	#define MSG_MIN              "\002 Min"
+	#define MSG_MAX              "\002 Max"
+	#define MSG_FACTOR           "\002 Faktor"
+	#define MSG_AUTOTEMP         "AutoTemp"
+	#define MSG_ON               "Ein"
+	#define MSG_OFF              "Aus"
+	#define MSG_PID_P            "PID-P"
+	#define MSG_PID_I            "PID-I"
+	#define MSG_PID_D            "PID-D"
+	#define MSG_PID_C            "PID-C"
+	#define MSG_ACC              "Acc"
+	#define MSG_VXY_JERK         "Vxy-jerk"
+	#define MSG_VMAX             "Vmax "
+	#define MSG_X                "x"
+	#define MSG_Y                "y"
+	#define MSG_Z                "z"
+	#define MSG_E                "e"
+	#define MSG_VMIN             "Vmin"
+	#define MSG_VTRAV_MIN        "VTrav min"
+	#define MSG_AMAX             "Amax "
+	#define MSG_A_RETRACT        "A-Retract"
+	#define MSG_XSTEPS           "Xsteps/mm"
+	#define MSG_YSTEPS           "Ysteps/mm"
+	#define MSG_ZSTEPS           "Zsteps/mm"
+	#define MSG_ESTEPS           "Esteps/mm"
+	#define MSG_RECTRACT_WIDE    "Rectract"
+	#define MSG_WATCH            "Beobachten"
+	#define MSG_TEMPERATURE      "Temperatur"
+	#define MSG_MOTION           "Bewegung"
+	#define MSG_STORE_EPROM      "EPROM speichern"
+	#define MSG_LOAD_EPROM       "EPROM laden"
+	#define MSG_RESTORE_FAILSAFE "Standardkonfig."
+	#define MSG_REFRESH          "Aktualisieren"
+	#define MSG_PREPARE          "Vorbereitung"
+	#define MSG_CONTROL          "Einstellungen"
+	#define MSG_TUNE             "Justierung"
+	#define MSG_PAUSE_PRINT      "Druck anhalten"
+	#define MSG_RESUME_PRINT     "Druck fortsetz"
+	#define MSG_STOP_PRINT       "Druck stoppen"
+	#define MSG_CARD_MENU        "SDKarten Menü"
+	#define MSG_NO_CARD          "Keine SDKarte"
+	#define MSG_DWELL            "Warten..."		
+	#define MSG_USERWAIT         "Warte auf Nutzer..."
+    #define MSG_RESUMING         "Druck fortsetzung"
+	#define MSG_NO_MOVE          "Kein Zug."
+	#define MSG_PART_RELEASE     "Stepper tlw frei"
+	#define MSG_KILLED           "KILLED"
+	#define MSG_STOPPED          "GESTOPPT"
+	#define MSG_STEPPER_RELEASED "Stepper frei"
+    #define MSG_CONTROL_RETRACT  "Retract mm"
+    #define MSG_CONTROL_RETRACTF "Retract  F"
+    #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
+    #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+    #define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
+    #define MSG_AUTORETRACT      "AutoRetr."
+    #define MSG_FILAMENTCHANGE "Filament wechseln"
+	
+// Serial Console Messages
+
+	#define MSG_Enqueing "enqueing \""
+	#define MSG_POWERUP "PowerUp"
+	#define MSG_EXTERNAL_RESET " External Reset"
+	#define MSG_BROWNOUT_RESET " Brown out Reset"
+	#define MSG_WATCHDOG_RESET " Watchdog Reset"
+	#define MSG_SOFTWARE_RESET " Software Reset"
+	#define MSG_MARLIN "Marlin: "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Last Updated: "
+	#define MSG_FREE_MEMORY " Free Memory: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Done saving file."
+	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+	#define MSG_FILE_PRINTED "Done printing file"
+	#define MSG_BEGIN_FILE_LIST "Begin file list"
+	#define MSG_END_FILE_LIST "End file list"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+	#define MSG_HEATING "Heating..."
+	#define MSG_HEATING_COMPLETE "Heating done."
+	#define MSG_BED_HEATING "Bed Heating."
+	#define MSG_BED_DONE "Bed done."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Count X:"
+	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
+	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
+	#define MSG_RESEND "Resend:"
+	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
+	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+	#define MSG_INVALID_EXTRUDER "Invalid extruder"
+	#define MSG_X_MIN "x_min: "
+	#define MSG_X_MAX "x_max: "
+	#define MSG_Y_MIN "y_min: "
+	#define MSG_Y_MAX "y_max: "
+	#define MSG_Z_MIN "z_min: "
+	#define MSG_Z_MAX "z_max: "
+	#define MSG_M119_REPORT "Reporting endstop status"
+	#define MSG_ENDSTOP_HIT "TRIGGERED"
+	#define MSG_ENDSTOP_OPEN "open"
+	#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+	#define MSG_SD_INIT_FAIL "SD init fail"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
+	#define MSG_SD_CARD_OK "SD card ok"
+	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
+	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+	#define MSG_SD_FILE_OPENED "File opened:"
+	#define MSG_SD_SIZE " Size:"
+	#define MSG_SD_FILE_SELECTED "File selected"
+	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
+	#define MSG_SD_PRINTING_BYTE "SD printing byte "
+	#define MSG_SD_NOT_PRINTING "Not SD printing"
+	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+
+	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
+	#define MSG_ENDSTOPS_HIT "endstops hit: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 5
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME " Lista."
+#define MSG_SD_INSERTED "Tarjeta SD Colocada"
+#define MSG_SD_REMOVED "Tarjeta SD Retirada"
+#define MSG_MAIN " Menu Principal \003"
+#define MSG_AUTOSTART " Autostart"
+#define MSG_DISABLE_STEPPERS " Apagar Motores"
+#define MSG_AUTO_HOME " Llevar Ejes al Cero"
+#define MSG_SET_ORIGIN " Establecer Cero"
+#define MSG_COOLDOWN " Enfriar"
+#define MSG_EXTRUDE " Extruir"
+#define MSG_RETRACT " Retraer"
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
+#define MSG_MOVE_AXIS " Mover Ejes      \x7E"
+#define MSG_SPEED " Velocidad:"
+#define MSG_NOZZLE " \002Nozzle:"
+#define MSG_NOZZLE1 " \002Nozzle2:"
+#define MSG_NOZZLE2 " \002Nozzle3:"
+#define MSG_BED " \002Base:"
+#define MSG_FAN_SPEED " Ventilador:"
+#define MSG_FLOW " Flujo:"
+#define MSG_CONTROL " Control \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Fact:"
+#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_ON "On "
+#define MSG_OFF "Off"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC  " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retrac.:"
+#define MSG_XSTEPS " Xpasos/mm:"
+#define MSG_YSTEPS " Ypasos/mm:"
+#define MSG_ZSTEPS " Zpasos/mm:"
+#define MSG_ESTEPS " Epasos/mm:"
+#define MSG_MAIN_WIDE " Menu Principal  \003"
+#define MSG_RECTRACT_WIDE " Retraer         \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
+#define MSG_TEMPERATURE_RTN  " Temperatura     \003"
+#define MSG_MOTION_WIDE " Movimiento      \x7E"
+#define MSG_STORE_EPROM " Guardar Memoria"
+#define MSG_LOAD_EPROM " Cargar Memoria"
+#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+#define MSG_REFRESH "\004Volver a cargar"
+#define MSG_WATCH " Monitorizar \003"
+#define MSG_PREPARE " Preparar \x7E"
+#define MSG_PREPARE_ALT " Preparar \003"
+#define MSG_CONTROL_ARROW " Control  \x7E"
+#define MSG_RETRACT_ARROW " Retraer  \x7E"
+#define MSG_TUNE " Ajustar \x7E"
+#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
+#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
+#define MSG_STOP_PRINT " Detener Impresion \x7E"
+#define MSG_CARD_MENU " Menu de SD    \x7E"
+#define MSG_NO_CARD " No hay Tarjeta SD"
+#define MSG_DWELL "Reposo..."
+#define MSG_USERWAIT "Esperando Ordenes..."
+#define MSG_NO_MOVE "Sin movimiento"
+#define MSG_PART_RELEASE "Desacople Parcial"
+#define MSG_KILLED "PARADA DE EMERGENCIA. "
+#define MSG_STOPPED "PARADA. "
+#define MSG_STEPPER_RELEASED "Desacoplada."
+#define MSG_CONTROL_RETRACT  " Retraer mm:"
+#define MSG_CONTROL_RETRACTF " Retraer  F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
+#define MSG_AUTORETRACT " AutoRetr.:"
+#define MSG_FILAMENTCHANGE "Change filament"
+// Serial Console Messages
+
+#define MSG_Enqueing "En cola \""
+#define MSG_POWERUP "PowerUp"
+#define MSG_EXTERNAL_RESET " Reset Externo"
+#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
+#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
+#define MSG_SOFTWARE_RESET " Reset por Software"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Autor: "
+#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
+#define MSG_FREE_MEMORY " Memoria libre: "
+#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Guardado."
+#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
+#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
+#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
+#define MSG_FILE_PRINTED "Impresion terminada"
+#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
+#define MSG_END_FILE_LIST "Fin de la lista de archivos"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
+#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
+#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
+#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
+#define MSG_HEATING "Calentando..."
+#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
+#define MSG_BED_HEATING "Calentando la base."
+#define MSG_BED_DONE "Base Caliente."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Cuenta X:"
+#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
+#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
+#define MSG_RESEND "Reenviar:"
+#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
+#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
+#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
+#define MSG_X_MIN "x_min: "
+#define MSG_X_MAX "x_max: "
+#define MSG_Y_MIN "y_min: "
+#define MSG_Y_MAX "y_max: "
+#define MSG_Z_MIN "z_min: "
+#define MSG_M119_REPORT "Comprobando fines de carrera."
+#define MSG_ENDSTOP_HIT "PULSADO"
+#define MSG_ENDSTOP_OPEN "abierto"
+#define MSG_HOTEND_OFFSET "Hotend offsets:"
+        
+#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
+#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
+#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
+#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
+#define MSG_SD_CARD_OK "Tarjeta SD OK"
+#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
+#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
+#define MSG_SD_FILE_OPENED "Archivo abierto:"
+#define MSG_SD_SIZE " Tamaño:"
+#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
+#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
+#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
+#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
+#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
+
+#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
+#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
+#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
+
+#endif
+
+#if LANGUAGE_CHOICE == 6
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME			" Готов"
+#define MSG_SD_INSERTED						"Карта вставлена"
+#define MSG_SD_REMOVED						"Карта извлечена"
+#define MSG_MAIN							" Меню              \003"
+#define MSG_AUTOSTART						" Автостарт          "
+#define MSG_DISABLE_STEPPERS				" Выключить двигатели"
+#define MSG_AUTO_HOME						" Парковка           "
+#define MSG_SET_ORIGIN						" Запомнить ноль     "
+#define MSG_PREHEAT_PLA						" Преднагрев PLA     "
+#define MSG_PREHEAT_PLA_SETTINGS			" Настр. преднагр.PLA"
+#define MSG_PREHEAT_ABS						" Преднагрев ABS     "
+#define MSG_PREHEAT_ABS_SETTINGS			" Настр. преднагр.ABS"
+#define MSG_COOLDOWN						" Охлаждение         "
+#define MSG_EXTRUDE							" Экструзия          "
+#define MSG_RETRACT							" Откат"
+#define MSG_MOVE_AXIS						" Движение по осям  \x7E"
+#define MSG_SPEED							" Скорость:"
+#define MSG_NOZZLE							" \002 Фильера:"
+#define MSG_NOZZLE1							" \002 Фильера2:"
+#define MSG_NOZZLE2							" \002 Фильера3:"
+#define MSG_BED								" \002 Кровать:"
+#define MSG_FAN_SPEED						" Куллер:"
+#define MSG_FLOW							" Поток:"
+#define MSG_CONTROL							" Настройки \003"
+#define MSG_MIN								" \002 Минимум:"
+#define MSG_MAX								" \002 Максимум:"
+#define MSG_FACTOR							" \002 Фактор:"
+#define MSG_AUTOTEMP						" Autotemp:"
+#define MSG_ON								"Вкл. "
+#define MSG_OFF								"Выкл. "
+#define MSG_PID_P							" PID-P: "
+#define MSG_PID_I							" PID-I: "
+#define MSG_PID_D							" PID-D: "
+#define MSG_PID_C							" PID-C: "
+#define MSG_ACC								" Acc:"
+#define MSG_VXY_JERK						" Vxy-jerk: "
+#define MSG_VMAX							" Vmax "
+#define MSG_X								"x:"
+#define MSG_Y								"y:"
+#define MSG_Z								"z:"
+#define MSG_E								"e:"
+#define MSG_VMIN							" Vmin:"
+#define MSG_VTRAV_MIN						" VTrav min:"
+#define MSG_AMAX							" Amax "
+#define MSG_A_RETRACT						" A-retract:"
+#define MSG_XSTEPS							" X шаг/mm:"
+#define MSG_YSTEPS							" Y шаг/mm:"
+#define MSG_ZSTEPS							" Z шаг/mm:"
+#define MSG_ESTEPS							" E шаг/mm:"
+#define MSG_RECTRACT    					" Откат подачи      \x7E"
+#define MSG_TEMPERATURE  				" Температура       \x7E"
+#define MSG_MOTION						" Скорости          \x7E"
+#define MSG_STORE_EPROM						" Сохранить настройки"
+#define MSG_LOAD_EPROM						" Загрузить настройки"
+#define MSG_RESTORE_FAILSAFE				" Сброс настроек     "
+#define MSG_REFRESH							"\004Обновить           "
+#define MSG_WATCH							" Обзор             \003"
+#define MSG_PREPARE							" Действия          \x7E"
+#define MSG_TUNE					" Настройки         \x7E"
+#define MSG_PAUSE_PRINT						" Пауза печати      \x7E"
+#define MSG_RESUME_PRINT					" Продолжить печать \x7E"
+#define MSG_STOP_PRINT						" Остановить печать \x7E"
+#define MSG_CARD_MENU						" Меню карты        \x7E"
+#define MSG_NO_CARD							" Нет карты"
+#define MSG_DWELL							"Сон..."
+#define MSG_USERWAIT						"Нажмите для продолж."
+#define MSG_NO_MOVE							"Нет движения.       "
+#define MSG_PART_RELEASE					" Извлечение принта  "
+#define MSG_KILLED							"УБИТО. "
+#define MSG_STOPPED							"ОСТАНОВЛЕНО. "
+#define MSG_CONTROL_RETRACT					" Откат mm:"
+#define MSG_CONTROL_RETRACTF				" Откат  F:"
+#define MSG_CONTROL_RETRACT_ZLIFT			" Прыжок mm:"
+#define MSG_CONTROL_RETRACT_RECOVER			" Возврат +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF		" Возврат  F:"
+#define MSG_AUTORETRACT						" АвтоОткат:"
+#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+#define MSG_Enqueing						"Запланировано \""
+#define MSG_POWERUP							"Включение питания"
+#define MSG_EXTERNAL_RESET					" Внешний сброс"
+#define MSG_BROWNOUT_RESET					" Brown out сброс"
+#define MSG_WATCHDOG_RESET					" Watchdog сброс"
+#define MSG_SOFTWARE_RESET					" программный сброс"
+#define MSG_MARLIN							"Marlin "
+#define MSG_AUTHOR							" | Автор: "
+#define MSG_CONFIGURATION_VER				" Последнее обновление: "
+#define MSG_FREE_MEMORY						" Памяти свободно: "
+#define MSG_PLANNER_BUFFER_BYTES			"  Буффер очереди команд Bytes: "
+#define MSG_OK								"ok"
+#define MSG_FILE_SAVED						"Файл записан."
+#define MSG_ERR_LINE_NO						"Номен строки это не последняя строка+1, последняя строка:"
+#define MSG_ERR_CHECKSUM_MISMATCH			"контрольная сумма не совпадает, последняя строка:"
+#define MSG_ERR_NO_CHECKSUM					"нет контрольной суммы для строки, последняя строка:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM	"нет строки для контрольной суммы, последняя строка:"
+#define MSG_FILE_PRINTED					"Печать файла завершена"
+#define MSG_BEGIN_FILE_LIST					"Список файлов"
+#define MSG_END_FILE_LIST					"Конец списка файлов"
+#define MSG_M104_INVALID_EXTRUDER			"M104 ошибка экструдера "
+#define MSG_M105_INVALID_EXTRUDER			"M105 ошибка экструдера "
+#define MSG_M218_INVALID_EXTRUDER			"M218 ошибка экструдера "
+#define MSG_ERR_NO_THERMISTORS				"Нет термистра - нет температуры"
+#define MSG_M109_INVALID_EXTRUDER			"M109 ошибка экструдера "
+#define MSG_HEATING							"Нагрев...  "
+#define MSG_HEATING_COMPLETE				"Наргето.    "
+#define MSG_BED_HEATING						"Нагрев стола...     "
+#define MSG_BED_DONE						"Стол нагрет.        "
+#define MSG_M115_REPORT						"FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X							" Count X:"
+#define MSG_ERR_KILLED						"Принтер остановлен. вызов kill() !!"
+#define MSG_ERR_STOPPED						"Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
+#define MSG_RESEND							"Переотправка:"
+#define MSG_UNKNOWN_COMMAND					"Неизвестная команда:\""
+#define MSG_ACTIVE_EXTRUDER					"Активный экструдер: "
+#define MSG_INVALID_EXTRUDER				"Ошибка экструдера"
+#define MSG_X_MIN							"x_min:"
+#define MSG_X_MAX							"x_max:"
+#define MSG_Y_MIN							"y_min:"
+#define MSG_Y_MAX							"y_max:"
+#define MSG_Z_MIN							"z_min:"
+#define MSG_Z_MAX							"z_max:"
+#define MSG_M119_REPORT						"Статус концевиков"
+#define MSG_ENDSTOP_HIT						"Срабатывание концевика"
+#define MSG_ENDSTOP_OPEN					"Концевик освобожден"
+#define MSG_HOTEND_OFFSET					"Hotend offsets:"
+#define MSG_SD_CANT_OPEN_SUBDIR				"Не открыть папку"
+#define MSG_SD_INIT_FAIL					"Ошибка инициализации SD"
+#define MSG_SD_VOL_INIT_FAIL				"Ошибка инициализации раздела"
+#define MSG_SD_OPENROOT_FAIL				"Не прочесть содержимое корня"
+#define MSG_SD_CARD_OK						"SD карта в порядке"
+#define MSG_SD_WORKDIR_FAIL					"не открыть рабочую папку"
+#define MSG_SD_OPEN_FILE_FAIL				"Ошибка чтения, файл: "
+#define MSG_SD_FILE_OPENED					"Файл открыт:"
+#define MSG_SD_SIZE							" Размер:"
+#define MSG_SD_FILE_SELECTED				"Файл выбран"
+#define MSG_SD_WRITE_TO_FILE				"Запись в файл: "
+#define MSG_SD_PRINTING_BYTE				"SD печать byte "
+#define MSG_SD_NOT_PRINTING					"нет SD печати"
+#define MSG_SD_ERR_WRITE_TO_FILE			"ошибка записи в файл"
+#define MSG_SD_CANT_ENTER_SUBDIR			"Не зайти в папку:"
+#define MSG_STEPPER_TO_HIGH					"Частота шагов очень высока : "
+#define MSG_ENDSTOPS_HIT					"концевик сработал: "
+#define MSG_ERR_COLD_EXTRUDE_STOP			" защита холодной экструзии"
+#define MSG_ERR_LONG_EXTRUDE_STOP			" защита превышения длинны экструзии"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 7
+
+	// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " Pronto."
+	#define MSG_SD_INSERTED          "SD Card inserita"
+	#define MSG_SD_REMOVED           "SD Card rimossa"
+	#define MSG_MAIN                 "Menu principale"
+	#define MSG_AUTOSTART            "Autostart"
+	#define MSG_DISABLE_STEPPERS     "Disabilita Motori"
+	#define MSG_AUTO_HOME            "Auto Home"
+	#define MSG_SET_ORIGIN           "Imposta Origine"
+	#define MSG_PREHEAT_PLA          "Preriscalda PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
+	#define MSG_PREHEAT_ABS          "Preriscalda ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
+	#define MSG_COOLDOWN             "Rafredda"
+	#define MSG_EXTRUDE              "Estrudi"
+	#define MSG_RETRACT              "Ritrai"
+	#define MSG_MOVE_AXIS            "Muovi Asse"
+	#define MSG_SPEED                "Velcità"
+	#define MSG_NOZZLE               "Ugello"
+	#define MSG_NOZZLE1              "Ugello2"
+	#define MSG_NOZZLE2              "Ugello3"
+	#define MSG_BED                  "Piatto"
+	#define MSG_FAN_SPEED            "Ventola"
+	#define MSG_FLOW                 "Flusso"
+	#define MSG_CONTROL              "Controllo"
+	#define MSG_MIN                  " \002 Min:"
+	#define MSG_MAX                  " \002 Max:"
+	#define MSG_FACTOR               " \002 Fact:"
+	#define MSG_AUTOTEMP             "Autotemp"
+	#define MSG_ON                   "On "
+	#define MSG_OFF                  "Off"
+	#define MSG_PID_P                "PID-P"
+	#define MSG_PID_I                "PID-I"
+	#define MSG_PID_D                "PID-D"
+	#define MSG_PID_C                "PID-C"
+	#define MSG_ACC                  "Accel"
+	#define MSG_VXY_JERK             "Vxy-jerk"
+	#define MSG_VMAX                 "Vmax"
+	#define MSG_X                    "x"
+	#define MSG_Y                    "y"
+	#define MSG_Z                    "z"
+	#define MSG_E                    "e"
+	#define MSG_VMIN                 "Vmin"
+	#define MSG_VTRAV_MIN            "VTrav min"
+	#define MSG_AMAX                 "Amax"
+	#define MSG_A_RETRACT            "A-retract"
+	#define MSG_XSTEPS               "Xpassi/mm"
+	#define MSG_YSTEPS               "Ypassi/mm"
+	#define MSG_ZSTEPS               "Zpassi/mm"
+	#define MSG_ESTEPS               "Epassi/mm"
+	#define MSG_RECTRACT             "Ritrai"
+	#define MSG_TEMPERATURE          "Temperatura"
+	#define MSG_MOTION               "Movimento"
+	#define MSG_STORE_EPROM          "Salva in EEPROM"
+	#define MSG_LOAD_EPROM           "Carica da EEPROM"
+	#define MSG_RESTORE_FAILSAFE     "Impostaz. default"
+	#define MSG_REFRESH              "Aggiorna"
+	#define MSG_WATCH                "Guarda"
+	#define MSG_PREPARE              "Prepara"
+	#define MSG_TUNE                 "Adatta"
+	#define MSG_PAUSE_PRINT          "Pausa"
+	#define MSG_RESUME_PRINT         "Riprendi Stampa"
+	#define MSG_STOP_PRINT           "Arresta Stampa"
+	#define MSG_CARD_MENU            "SD Card Menu"
+	#define MSG_NO_CARD              "No SD Card"
+	#define MSG_DWELL                "Sospensione..."
+	#define MSG_USERWAIT             "Attendi Utente..."
+	#define MSG_RESUMING             "Riprendi Stampa"
+	#define MSG_NO_MOVE              "Nessun Movimento."
+	#define MSG_KILLED               "UCCISO. "
+	#define MSG_STOPPED              "ARRESTATO. "
+	#define MSG_CONTROL_RETRACT      "Ritrai mm"
+	#define MSG_CONTROL_RETRACTF     "Ritrai  F"
+	#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
+	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
+	#define MSG_AUTORETRACT          "AutoArretramento"
+	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
+	#define MSG_FILAMENTCHANGE       "Cambia filamento"
+	#define MSG_INIT_SDCARD          "Iniz. SD-Card"
+	#define MSG_CNG_SDCARD           "Cambia SD-Card"
+
+	// Serial Console Messages
+
+	#define MSG_Enqueing             "accodamento \""
+	#define MSG_POWERUP              "Accensione"
+	#define MSG_EXTERNAL_RESET       " Reset Esterno"
+	#define MSG_BROWNOUT_RESET       " Brown out Reset"
+	#define MSG_WATCHDOG_RESET       " Watchdog Reset"
+	#define MSG_SOFTWARE_RESET       " Software Reset"
+	#define MSG_MARLIN               "Marlin "
+	#define MSG_AUTHOR               " | Autore: "
+	#define MSG_CONFIGURATION_VER    " Ultimo Aggiornamento: "
+	#define MSG_FREE_MEMORY          " Memoria Libera: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK                   "ok"
+	#define MSG_FILE_SAVED           "File Salvato."
+	#define MSG_ERR_LINE_NO          "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
+	#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
+	#define MSG_ERR_NO_CHECKSUM      "Nessun Checksum con Numero di Linea, Ultima Linea: "
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
+	#define MSG_FILE_PRINTED         "File stampato"
+	#define MSG_BEGIN_FILE_LIST      "Inizio Lista File"
+	#define MSG_END_FILE_LIST        "Fine Lista File"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
+	#define MSG_ERR_NO_THERMISTORS   "Nessun Termistore - nessuna temperatura"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
+	#define MSG_HEATING              "Riscaldamento..."
+	#define MSG_HEATING_COMPLETE     "Stampante Calda."
+	#define MSG_BED_HEATING          "Riscaldamento Piatto."
+	#define MSG_BED_DONE             "Piatto Pronto."
+	#define MSG_M115_REPORT          "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X              " Calcola X: "
+	#define MSG_ERR_KILLED           "Stampante Calda. kill() chiamata !!"
+	#define MSG_ERR_STOPPED          "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
+	#define MSG_RESEND               "Reinviato:"
+	#define MSG_UNKNOWN_COMMAND      "Comando sconosciuto: \""
+	#define MSG_ACTIVE_EXTRUDER      "Attiva Estrusore: "
+	#define MSG_INVALID_EXTRUDER     "Estrusore non valido"
+	#define MSG_X_MIN                "x_min: "
+	#define MSG_X_MAX                "x_max: "
+	#define MSG_Y_MIN                "y_min: "
+	#define MSG_Y_MAX                "y_max: "
+	#define MSG_Z_MIN                "z_min: "
+	#define MSG_Z_MAX                "z_max: "
+	#define MSG_M119_REPORT          "Segnalazione stato degli endstop"
+	#define MSG_ENDSTOP_HIT          "INNESCATO"
+	#define MSG_ENDSTOP_OPEN         "aperto"
+	#define MSG_HOTEND_OFFSET        "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR  "Impossibile aprire sottocartella"
+	#define MSG_SD_INIT_FAIL         "Fallita Inizializzazione SD"
+	#define MSG_SD_VOL_INIT_FAIL     "Fallito il montaggio del Volume"
+	#define MSG_SD_OPENROOT_FAIL     "Fallita l'apertura Cartella Principale"
+	#define MSG_SD_CARD_OK           "SD card ok"
+	#define MSG_SD_WORKDIR_FAIL      "Fallita l'apertura Cartella di Lavoro"
+	#define MSG_SD_OPEN_FILE_FAIL    "Fallita l'apertura del File: "
+	#define MSG_SD_FILE_OPENED       "File aperto: "
+	#define MSG_SD_SIZE              " Dimensione: "
+	#define MSG_SD_FILE_SELECTED     "File selezionato"
+	#define MSG_SD_WRITE_TO_FILE     "Scrittura su file: "
+	#define MSG_SD_PRINTING_BYTE     "Si sta scrivendo il byte su SD "
+	#define MSG_SD_NOT_PRINTING      "Non si sta scrivendo su SD"
+	#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
+
+	#define MSG_STEPPER_TO_HIGH      "Steprate troppo alto: "
+	#define MSG_ENDSTOPS_HIT         "Raggiunto il fondo carrello: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
+
+#endif
+
+
+#if LANGUAGE_CHOICE == 8
+
+// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " Pronta."
+	#define MSG_SD_INSERTED "Cartao SD inserido"
+	#define MSG_SD_REMOVED "Cartao SD removido"
+	#define MSG_MAIN " Menu Principal \003"
+	#define MSG_AUTOSTART " Autostart"
+	#define MSG_DISABLE_STEPPERS " Apagar Motores"
+	#define MSG_AUTO_HOME " Ir para Origen"
+	#define MSG_SET_ORIGIN " Estabelecer Origen"
+	#define MSG_PREHEAT_PLA " pre-aquecer PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
+	#define MSG_PREHEAT_ABS " pre-aquecer ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
+	#define MSG_COOLDOWN " Esfriar"
+	#define MSG_EXTRUDE " Extrudar"
+	#define MSG_RETRACT " Retrair"
+	#define MSG_PREHEAT_PLA " pre-aquecer PLA"
+	#define MSG_PREHEAT_ABS " pre-aquecer ABS"
+	#define MSG_MOVE_AXIS " Mover eixo      \x7E"
+	#define MSG_SPEED " Velocidade:"
+	#define MSG_NOZZLE " \002Nozzle:"
+	#define MSG_NOZZLE1 " \002Nozzle2:"
+	#define MSG_NOZZLE2 " \002Nozzle3:"
+	#define MSG_BED " \002Base:"
+	#define MSG_FAN_SPEED " Velocidade Ventoinha:"
+	#define MSG_FLOW " Fluxo:"
+	#define MSG_CONTROL " Controle \003"
+	#define MSG_MIN " \002 Min:"
+	#define MSG_MAX " \002 Max:"
+	#define MSG_FACTOR " \002 Fact:"
+	#define MSG_AUTOTEMP " Autotemp:"
+	#define MSG_ON "On "
+	#define MSG_OFF "Off"
+	#define MSG_PID_P " PID-P: "
+	#define MSG_PID_I " PID-I: "
+	#define MSG_PID_D " PID-D: "
+	#define MSG_PID_C " PID-C: "
+	#define MSG_ACC  " Acc:"
+	#define MSG_VXY_JERK " Vxy-jerk: "
+	#define MSG_VMAX " Vmax "
+	#define MSG_X "x:"
+	#define MSG_Y "y:"
+	#define MSG_Z "z:"
+	#define MSG_E "e:"
+	#define MSG_VMIN " Vmin:"
+	#define MSG_VTRAV_MIN " VTrav min:"
+	#define MSG_AMAX " Amax "
+	#define MSG_A_RETRACT " A-retract:"
+	#define MSG_XSTEPS " Xpasso/mm:"
+	#define MSG_YSTEPS " Ypasso/mm:"
+	#define MSG_ZSTEPS " Zpasso/mm:"
+	#define MSG_ESTEPS " Epasso/mm:"
+	#define MSG_MAIN_WIDE " Menu Principal  \003"
+	#define MSG_RECTRACT_WIDE " Retrair    \x7E"
+	#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
+	#define MSG_TEMPERATURE_RTN " Temperatura  \003"
+	#define MSG_MOTION_WIDE " Movimento     \x7E"
+	#define MSG_STORE_EPROM " Guardar memoria"
+	#define MSG_LOAD_EPROM " Carregar memoria"
+	#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+	#define MSG_REFRESH "\004Recarregar"
+	#define MSG_WATCH " Monitorar   \003"
+	#define MSG_PREPARE " Preparar \x7E"
+	#define MSG_PREPARE_ALT " Preparar \003"
+	#define MSG_CONTROL_ARROW " Controle \x7E"
+	#define MSG_RETRACT_ARROW " Retrair \x7E"
+	#define MSG_TUNE " Tune    \x7E"
+	#define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
+	#define MSG_RESUME_PRINT " Resumir Impressao \x7E"
+	#define MSG_STOP_PRINT " Parar Impressao   \x7E"
+	#define MSG_CARD_MENU " Menu cartao SD    \x7E"
+	#define MSG_NO_CARD " Sem cartao SD"
+	#define MSG_DWELL "Repouso..."
+	#define MSG_USERWAIT "Esperando Ordem..."
+	#define MSG_NO_MOVE "Sem movimento."
+	#define MSG_PART_RELEASE "Lancamento Parcial"
+	#define MSG_KILLED "PARADA DE EMERGENCIA. "
+	#define MSG_STOPPED "PARADA. "
+	#define MSG_STEPPER_RELEASED "Lancado."
+	#define MSG_CONTROL_RETRACT  " Retrair mm:"
+	#define MSG_CONTROL_RETRACTF " Retrair  F:"
+	#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+	#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+	#define MSG_CONTROL_RETRACT_RECOVERF " DesRet  F:"
+	#define MSG_AUTORETRACT " AutoRetr.:"
+        #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
+        #define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "enqueing \""
+	#define MSG_POWERUP "PowerUp"
+	#define MSG_EXTERNAL_RESET " Reset Externo"
+	#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
+	#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
+	#define MSG_SOFTWARE_RESET " Reset por Software"
+	#define MSG_MARLIN "Marlin "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
+	#define MSG_FREE_MEMORY " memoria Livre: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Guardado."
+	#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
+	#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
+	#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
+	#define MSG_FILE_PRINTED "Impressao terminada"
+	#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
+	#define MSG_END_FILE_LIST "Fim da lista de arquivos"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
+	#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
+	#define MSG_HEATING "Aquecendo..."
+	#define MSG_HEATING_COMPLETE "Aquecido."
+	#define MSG_BED_HEATING "Aquecendo a Base."
+	#define MSG_BED_DONE "Base quente."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Conta X:"
+	#define MSG_ERR_KILLED "Impressora parada com kill() !!"
+	#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
+	#define MSG_RESEND "Reenviar:"
+	#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
+	#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
+	#define MSG_INVALID_EXTRUDER "Extrusor invalido"
+	#define MSG_X_MIN "x_min: "
+	#define MSG_X_MAX "x_max: "
+	#define MSG_Y_MIN "y_min: "
+	#define MSG_Y_MAX "y_max: "
+	#define MSG_Z_MIN "z_min: "
+	#define MSG_Z_MAX "z_max: "
+	#define MSG_M119_REPORT "Relatando estado do ponto final"
+	#define MSG_ENDSTOP_HIT "PULSADO"
+	#define MSG_ENDSTOP_OPEN "Aberto"
+	#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
+	#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
+	#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
+	#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
+	#define MSG_SD_CARD_OK "cartao SD ok"
+	#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
+	#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
+	#define MSG_SD_FILE_OPENED "Arquivo aberto:"
+	#define MSG_SD_SIZE " Size:"
+	#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
+	#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
+	#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
+	#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
+	#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
+
+	#define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
+	#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
+
+
+#endif
+
+
+
+#if LANGUAGE_CHOICE == 9
+
+// Finnish
+
+// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " valmis"
+	#define MSG_SD_INSERTED "Kortti asetettu"
+	#define MSG_SD_REMOVED "Kortti poistettu"
+	#define MSG_MAIN "Palaa"
+	#define MSG_AUTOSTART "Automaatti"
+	#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
+	#define MSG_AUTO_HOME "Aja referenssiin"
+	#define MSG_SET_ORIGIN "Aseta origo"
+	#define MSG_PREHEAT_PLA "Esilammita PLA"
+	#define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
+	#define MSG_PREHEAT_ABS "Esilammita ABS"
+	#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
+	#define MSG_COOLDOWN "Jaahdyta"
+	#define MSG_EXTRUDE "Pursota"
+	#define MSG_RETRACT "Veda takaisin"
+	#define MSG_MOVE_AXIS "Liikuta akseleita"
+	#define MSG_SPEED "Nopeus"
+	#define MSG_NOZZLE "Suutin"
+	#define MSG_NOZZLE1 "Suutin2"
+	#define MSG_NOZZLE2 "Suutin3"
+	#define MSG_BED "Alusta"
+	#define MSG_FAN_SPEED "Tuul. nopeus"
+	#define MSG_FLOW "Virtaus"
+	#define MSG_CONTROL "Kontrolli"
+	#define MSG_MIN " \002 Min"
+	#define MSG_MAX " \002 Max"
+	#define MSG_FACTOR " \002 Kerr"
+	#define MSG_AUTOTEMP "Autotemp"
+	#define MSG_ON "On "
+	#define MSG_OFF "Off"
+	#define MSG_PID_P "PID-P"
+	#define MSG_PID_I "PID-I"
+	#define MSG_PID_D "PID-D"
+	#define MSG_PID_C "PID-C"
+	#define MSG_ACC  "Kiihtyv"
+	#define MSG_VXY_JERK "Vxy-jerk"
+	#define MSG_VMAX "Vmax "
+	#define MSG_X "x"
+	#define MSG_Y "y"
+	#define MSG_Z "z"
+	#define MSG_E "e"
+	#define MSG_VMIN "Vmin"
+	#define MSG_VTRAV_MIN "VLiike min"
+	#define MSG_AMAX "Amax "
+	#define MSG_A_RETRACT "A-peruuta"
+	#define MSG_XSTEPS "Xsteps/mm"
+	#define MSG_YSTEPS "Ysteps/mm"
+	#define MSG_ZSTEPS "Zsteps/mm"
+	#define MSG_ESTEPS "Esteps/mm"
+	#define MSG_RECTRACT "Veda takaisin"
+	#define MSG_TEMPERATURE "Lampotila"
+	#define MSG_MOTION "Liike"
+	#define MSG_STORE_EPROM "Tallenna muistiin"
+	#define MSG_LOAD_EPROM "Lataa muistista"
+	#define MSG_RESTORE_FAILSAFE "Palauta oletus"
+	#define MSG_REFRESH "Paivita"
+	#define MSG_WATCH "Seuraa"
+	#define MSG_PREPARE "Valmistele"
+	#define MSG_TUNE "Saada"
+	#define MSG_PAUSE_PRINT "Keskeyta tulostus"
+	#define MSG_RESUME_PRINT "Jatka tulostusta"
+	#define MSG_STOP_PRINT "Pysayta tulostus"
+	#define MSG_CARD_MENU "Korttivalikko"
+	#define MSG_NO_CARD "Ei korttia"
+	#define MSG_DWELL "Nukkumassa..."
+	#define MSG_USERWAIT "Odotetaan valintaa..."
+	#define MSG_RESUMING "Jatketaan tulostusta"
+	#define MSG_NO_MOVE "Ei liiketta."
+	#define MSG_KILLED "KILLED. "
+	#define MSG_STOPPED "STOPPED. "
+	#define MSG_CONTROL_RETRACT  "Veda mm"
+	#define MSG_CONTROL_RETRACTF "Veda F"
+	#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
+	#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+	#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"
+	#define MSG_AUTORETRACT "AutoVeto."
+	#define MSG_FILAMENTCHANGE "Change filament"
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "jonoon \""
+	#define MSG_POWERUP "Kaynnistys"
+	#define MSG_EXTERNAL_RESET " Ulkoinen Reset"
+	#define MSG_BROWNOUT_RESET " Alajannite Reset"
+	#define MSG_WATCHDOG_RESET " Vahtikoira Reset"
+	#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
+	#define MSG_MARLIN "Marlin "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
+	#define MSG_FREE_MEMORY " Vapaata muistia: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Tiedosto tallennettu."
+	#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
+	#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
+	#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
+	#define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
+	#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
+	#define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
+	#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
+	#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
+	#define MSG_HEATING "Lammitan..."
+	#define MSG_HEATING_COMPLETE "Lammitys valmis."
+	#define MSG_BED_HEATING "Alusta lampiaa."
+	#define MSG_BED_DONE "Alusta valmis."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Laskuri X: "
+	#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
+	#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
+	#define MSG_RESEND "Uudelleenlahetys: "
+	#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
+	#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
+	#define MSG_INVALID_EXTRUDER "Virheellinen suutin"
+	#define MSG_X_MIN "x_min: "
+	#define MSG_X_MAX "x_max: "
+	#define MSG_Y_MIN "y_min: "
+	#define MSG_Y_MAX "y_max: "
+	#define MSG_Z_MIN "z_min: "
+	#define MSG_Z_MAX "z_max: "
+	#define MSG_M119_REPORT "Rajakytkimien tilaraportti"
+	#define MSG_ENDSTOP_HIT "AKTIIVISENA"
+	#define MSG_ENDSTOP_OPEN "avoinna"
+	#define MSG_HOTEND_OFFSET "Hotend offsets:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
+	#define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
+	#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
+	#define MSG_SD_CARD_OK "SD kortti ok"
+	#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
+	#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
+	#define MSG_SD_FILE_OPENED "Tiedosto avattu: "
+	#define MSG_SD_SIZE " Koko: "
+	#define MSG_SD_FILE_SELECTED "Tiedosto valittu"
+	#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
+	#define MSG_SD_PRINTING_BYTE "SD tulostus byte "
+	#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
+	#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
+
+	#define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: "
+	#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
+
+#endif
+#endif // ifndef LANGUAGE_H
\ No newline at end of file From b2c1c64fb104906886c17c44fda5e8906b4a9258 Mon Sep 17 00:00:00 2001 From: Dirk Eichel Date: Fri, 1 Mar 2013 17:39:54 +0100 Subject: [PATCH 3/4] Add Motherboard variant 64 - STB V1.1 Definition for the graphic LCD are already in it, they will not harm the configuration as they are only defined constants --- Marlin/Configuration.h | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 0ba908b06..8031272db 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -34,6 +34,7 @@ // 6 = Sanguinololu < 1.2 // 62 = Sanguinololu 1.2 and above // 63 = Melzi +// 64 = STB V1.1 // 7 = Ultimaker // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare) // 8 = Teensylu @@ -314,6 +315,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th //LCD and SD support //#define ULTRA_LCD //general lcd support, also 16x2 +//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) //#define SDSUPPORT // Enable SD Card Support in Hardware Console //#define ULTIMAKERCONTROLLER //as available from the ultimaker online store. @@ -322,9 +324,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// The GADGETS3D G3D LCD/SD Controller (blue PCB) -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel + +// The GADGETS3D G3D LCD/SD Controller (blue PCB) +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel //#define G3D_PANEL //automatic expansion @@ -347,13 +349,22 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th // #define NEWPANEL //enable this if you have a click-encoder panel #define SDSUPPORT #define ULTRA_LCD - #define LCD_WIDTH 20 - #define LCD_HEIGHT 4 - + #ifdef DOGLCD // Change number of lines to match the DOG graphic display + #define LCD_WIDTH 20 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif #else //no panel but just lcd #ifdef ULTRA_LCD - #define LCD_WIDTH 16 - #define LCD_HEIGHT 2 + #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display + #define LCD_WIDTH 20 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif #endif #endif From 140e095c6ec6f96e8b2f4013361aacde306dd280 Mon Sep 17 00:00:00 2001 From: Dirk Eichel Date: Fri, 1 Mar 2013 17:47:32 +0100 Subject: [PATCH 4/4] Add pins for Motherboard variant 64 These definition contain also the definition for the graphics LCD. --- Marlin/pins.h | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/Marlin/pins.h b/Marlin/pins.h index 41aae2e22..f1babfa70 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -644,10 +644,13 @@ * Sanguinololu pin assignment * ****************************************************************************************/ +#if MOTHERBOARD == 64 +#define STB +#endif #if MOTHERBOARD == 63 #define MELZI #endif -#if MOTHERBOARD == 62 || MOTHERBOARD == 63 +#if MOTHERBOARD == 62 || MOTHERBOARD == 63 || MOTHERBOARD == 64 #undef MOTHERBOARD #define MOTHERBOARD 6 #define SANGUINOLOLU_V_1_2 @@ -687,6 +690,10 @@ #define FAN_PIN 4 #endif +#ifdef STB +#define FAN_PIN 4 +#endif + #define PS_ON_PIN -1 #define KILL_PIN -1 @@ -727,13 +734,25 @@ //we have no buzzer installed #define BEEPER -1 //LCD Pins - #define LCD_PINS_RS 4 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 30 - #define LCD_PINS_D5 29 - #define LCD_PINS_D6 28 - #define LCD_PINS_D7 27 - + #ifdef DOGLCD + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 30 + #define DOGLCD_CS 29 + // GLCD features + #define LCD_CONTRAST 1 + // Uncomment screen orientation + // #define LCD_SCREEN_ROT_0 + // #define LCD_SCREEN_ROT_90 + #define LCD_SCREEN_ROT_180 + // #define LCD_SCREEN_ROT_270 + #else // standard Hitachi LCD controller + #define LCD_PINS_RS 4 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 29 + #define LCD_PINS_D6 28 + #define LCD_PINS_D7 27 + #endif //The encoder and click button #define BTN_EN1 11 //must be a hardware interrupt pin #define BTN_EN2 10 //must be hardware interrupt pin