diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h
index 8ef93375a..f622524f7 100644
--- a/Marlin/configurator/config/Configuration_adv.h
+++ b/Marlin/configurator/config/Configuration_adv.h
@@ -41,7 +41,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/configurator/config/language.h b/Marlin/configurator/config/language.h
index 53e8b3077..46a306c9a 100644
--- a/Marlin/configurator/config/language.h
+++ b/Marlin/configurator/config/language.h
@@ -199,6 +199,7 @@
 #define MSG_PID_DEBUG_PTERM                 " pTerm "
 #define MSG_PID_DEBUG_ITERM                 " iTerm "
 #define MSG_PID_DEBUG_DTERM                 " dTerm "
+#define MSG_PID_DEBUG_CTERM                 " cTerm "
 #define MSG_INVALID_EXTRUDER_NUM            " - Invalid extruder number !"
 
 #define MSG_HEATER_BED                      "bed"
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 06f909997..7b6cdd728 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index dc21c0c38..e8334227a 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 52b7466f6..dee7514d8 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 7e3eda258..80580c2d3 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -41,7 +41,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index cc80b88bb..a5983c5ae 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index e12918530..126794b1b 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -41,7 +41,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 71492d2de..e010b1383 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
index b4a815bbb..e04d43a1e 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 1af6cb88a..7ba24cd24 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 1ea29f251..60700a2e9 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 44420dcea..98632c104 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -55,7 +55,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 518aa906f..7ba1c6b3e 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 5218014c0..416d13516 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -51,7 +51,8 @@
   // if Kc is chosen well, the additional required power due to increased melting should be compensated.
   #define PID_ADD_EXTRUSION_RATE
   #if ENABLED(PID_ADD_EXTRUSION_RATE)
-    #define  DEFAULT_Kc (1) //heating power=Kc*(e_speed)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
   #endif
 #endif