Merge pull request #8548 from thinkyhead/bf1_mesh_gfx_overlay
[1.1.x] Adapt MESH_EDIT_GFX_OVERLAY
This commit is contained in:
commit
de67c3f235
@ -325,7 +325,7 @@ script:
|
|||||||
#
|
#
|
||||||
- use_example_configs delta/generic
|
- use_example_configs delta/generic
|
||||||
- opt_disable DISABLE_MIN_ENDSTOPS
|
- opt_disable DISABLE_MIN_ENDSTOPS
|
||||||
- opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2
|
- opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
|
||||||
- build_marlin
|
- build_marlin
|
||||||
#
|
#
|
||||||
# Delta Config (FLSUN AC because it's complex)
|
# Delta Config (FLSUN AC because it's complex)
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -216,6 +216,10 @@
|
|||||||
#error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration."
|
#error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration."
|
||||||
#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
|
#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
|
||||||
#error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
|
#error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
|
||||||
|
#elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY)
|
||||||
|
#error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration."
|
||||||
|
#elif defined(BABYSTEP_ZPROBE_GFX_REVERSE)
|
||||||
|
#error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE. Please update your configurations."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
@ -810,6 +814,10 @@ static_assert(1 >= 0
|
|||||||
#error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
|
#error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && (DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(DOGLCD))
|
||||||
|
#error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
|
||||||
|
#endif
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* LCD_BED_LEVELING requirements
|
* LCD_BED_LEVELING requirements
|
||||||
*/
|
*/
|
||||||
|
@ -420,76 +420,76 @@
|
|||||||
};
|
};
|
||||||
#endif // Extruders
|
#endif // Extruders
|
||||||
|
|
||||||
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
|
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
|
||||||
|
|
||||||
const unsigned char cw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
const unsigned char cw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
||||||
0x07,0xf8,0x00, // 000001111111100000000000
|
0x03,0xF8,0x00, // 000000111111100000000000
|
||||||
0x0c,0x0c,0x00, // 000011000000110000000000
|
0x0F,0xF7,0x00, // 000011111111111000000000
|
||||||
0x10,0x02,0x00, // 000100000000001000000000
|
0x17,0x0F,0x00, // 000111100000111100000000
|
||||||
0x20,0x01,0x00, // 001000000000000100000000
|
0x38,0x07,0x00, // 001110000000011100000000
|
||||||
0x60,0x01,0x80, // 011000000000000100000000
|
0x38,0x03,0x80, // 001110000000001110000000
|
||||||
0x40,0x00,0x80, // 010000000000000010000000
|
0x70,0x03,0x80, // 011100000000001110000000
|
||||||
0x40,0x03,0xe0, // 010000000000000011100000
|
0x70,0x0F,0xE0, // 011100000000111111100000
|
||||||
0x40,0x01,0xc0, // 010000000000000011000000
|
0x70,0x07,0xC0, // 011100000000011111000000
|
||||||
0x40,0x00,0x80, // 010000000000000010000000
|
0x70,0x03,0x80, // 011100000000001110000000
|
||||||
0x40,0x00,0x00, // 010000000000000000000000
|
0x70,0x01,0x00, // 011100000000000100000000
|
||||||
0x40,0x00,0x00, // 010000000000000000000000
|
0x70,0x00,0x00, // 011100000000000000000000
|
||||||
0x60,0x00,0x00, // 011000000000000000000000
|
0x68,0x00,0x00, // 001110000000000000000000
|
||||||
0x20,0x00,0x00, // 001000000000000000000000
|
0x38,0x07,0x00, // 001110000000011100000000
|
||||||
0x10,0x00,0x00, // 000100000000000000000000
|
0x17,0x0F,0x00, // 000111100000111100000000
|
||||||
0x0c,0x0c,0x00, // 000011000000110000000000
|
0x0F,0xFE,0x00, // 000011111111111000000000
|
||||||
0x07,0xf8,0x00 // 000001111111100000000000
|
0x03,0xF8,0x00 // 000000111111100000000000
|
||||||
};
|
};
|
||||||
|
|
||||||
const unsigned char ccw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
const unsigned char ccw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
||||||
0x01,0xfe,0x00, // 000000011111111000000000
|
0x00,0xFE,0x00, // 000000001111111000000000
|
||||||
0x03,0x03,0x00, // 000000110000001100000000
|
0x03,0xFF,0x80, // 000000111111111110000000
|
||||||
0x04,0x00,0x80, // 000001000000000010000000
|
0x07,0x83,0xC0, // 000001111000001111000000
|
||||||
0x08,0x00,0x40, // 000010000000000001000000
|
0x0E,0x01,0xC0, // 000011100000000111000000
|
||||||
0x18,0x00,0x60, // 000110000000000001100000
|
0x0E,0x00,0xE0, // 000011100000000011100000
|
||||||
0x10,0x00,0x20, // 000100000000000000100000
|
0x1C,0x00,0xE0, // 000111000000000011100000
|
||||||
0x7c,0x00,0x20, // 011111000000000000100000
|
0x7F,0x00,0xE0, // 011111110000000011100000
|
||||||
0x38,0x00,0x20, // 001110000000000000100000
|
0x3E,0x00,0xE0, // 001111100000000011100000
|
||||||
0x10,0x00,0x20, // 000100000000000000100000
|
0x1C,0x00,0xE0, // 000111000000000011100000
|
||||||
0x00,0x00,0x20, // 000000000000000000100000
|
0x08,0x00,0xE0, // 000010000000000011100000
|
||||||
0x00,0x00,0x20, // 000000000000000000100000
|
0x00,0x00,0xE0, // 000000000000000011100000
|
||||||
0x00,0x00,0x60, // 000000000000000001100000
|
0x00,0x01,0xC0, // 000000000000000111000000
|
||||||
0x00,0x00,0x40, // 000000000000000001000000
|
0x0E,0x01,0xC0, // 000011100000000111000000
|
||||||
0x00,0x00,0x80, // 000000000000000010000000
|
0x0F,0x07,0x80, // 000011110000011110000000
|
||||||
0x03,0x03,0x00, // 000000110000001100000000
|
0x07,0xFF,0x00, // 000001111111111100000000
|
||||||
0x01,0xfe,0x00 // 000000011111111000000000
|
0x01,0xFC,0x00 // 000000011111110000000000
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
const unsigned char up_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
const unsigned char up_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
||||||
0x06,0x00, // 000001100000
|
0x04,0x00, // 000001000000
|
||||||
0x0F,0x00, // 000011110000
|
0x0E,0x00, // 000011100000
|
||||||
0x1F,0x80, // 000111111000
|
0x1F,0x00, // 000111110000
|
||||||
0x3F,0xC0, // 001111111100
|
0x3F,0x80, // 001111111000
|
||||||
0x06,0x00, // 000001100000
|
0x7F,0xC0, // 011111111100
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00 // 000001100000
|
0x0E,0x00 // 000011100000
|
||||||
};
|
};
|
||||||
|
|
||||||
const unsigned char down_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
const unsigned char down_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00, // 000001100000
|
0x7F,0xC0, // 011111111100
|
||||||
0x3F,0xC0, // 001111111100
|
0x3F,0x80, // 001111111000
|
||||||
0x1F,0x80, // 000111111000
|
0x1F,0x00, // 000111110000
|
||||||
0x0F,0x00, // 000011110000
|
0x0E,0x00, // 000011100000
|
||||||
0x06,0x00 // 000001100000
|
0x04,0x00 // 000001000000
|
||||||
};
|
};
|
||||||
|
|
||||||
const unsigned char offset_bedline_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
const unsigned char offset_bedline_bmp[] PROGMEM = { //AVR-GCC, WinAVR
|
||||||
@ -510,5 +510,5 @@
|
|||||||
0x1E,0x00, // 0001111000000000
|
0x1E,0x00, // 0001111000000000
|
||||||
0x0C,0x00 // 0000110000000000
|
0x0C,0x00 // 0000110000000000
|
||||||
};
|
};
|
||||||
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY
|
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
|
||||||
#endif // HAS_TEMP_BED
|
#endif // HAS_TEMP_BED
|
||||||
|
@ -977,6 +977,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -1100,6 +1100,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -964,6 +964,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -948,6 +948,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -958,6 +958,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -607,6 +607,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -641,7 +645,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -948,6 +948,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -956,6 +956,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -967,6 +967,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -939,6 +939,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -939,6 +939,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -962,6 +962,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y 10
|
#define GRID_MAX_POINTS_Y 10
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -972,6 +972,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -961,6 +961,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -985,6 +985,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -607,6 +607,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -641,7 +645,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -961,6 +961,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -961,6 +961,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -611,6 +611,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -645,7 +649,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -955,6 +955,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -969,6 +969,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -988,6 +988,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -599,6 +599,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -633,7 +637,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1013,6 +1013,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -987,6 +987,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -618,6 +618,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -652,7 +656,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -957,6 +957,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -1089,6 +1089,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -612,6 +612,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -646,7 +650,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1083,6 +1083,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -612,6 +612,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -646,7 +650,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1078,6 +1078,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -612,6 +612,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -646,7 +650,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1081,6 +1081,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -612,6 +612,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -646,7 +650,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1081,6 +1081,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -617,6 +617,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -651,7 +655,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1090,6 +1090,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -612,6 +612,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -646,7 +650,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -971,6 +971,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 45 // Mesh inset margin on print area
|
#define MESH_INSET 45 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -960,6 +960,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -952,6 +952,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -610,6 +610,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -644,7 +648,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -962,6 +962,8 @@
|
|||||||
//========================= Unified Bed Leveling ============================
|
//========================= Unified Bed Leveling ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
|
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||||
|
|
||||||
#define MESH_INSET 1 // Mesh inset margin on print area
|
#define MESH_INSET 1 // Mesh inset margin on print area
|
||||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||||
|
@ -600,6 +600,10 @@
|
|||||||
// Enable this option and reduce the value to optimize screen updates.
|
// Enable this option and reduce the value to optimize screen updates.
|
||||||
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
|
||||||
//#define DOGM_SPI_DELAY_US 5
|
//#define DOGM_SPI_DELAY_US 5
|
||||||
|
|
||||||
|
// Swap the CW/CCW indicators in the graphics overlay
|
||||||
|
//#define OVERLAY_GFX_REVERSE
|
||||||
|
|
||||||
#endif // DOGLCD
|
#endif // DOGLCD
|
||||||
|
|
||||||
// @section safety
|
// @section safety
|
||||||
@ -634,7 +638,6 @@
|
|||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||||
//#define BABYSTEP_ZPROBE_GFX_REVERSE // Reverses the direction of the CW/CCW indicators
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
@ -1035,6 +1035,44 @@ void kill_screen(const char* lcd_msg) {
|
|||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
|
||||||
|
|
||||||
|
void _lcd_zoffset_overlay_gfx(const float zvalue) {
|
||||||
|
// Determine whether the user is raising or lowering the nozzle.
|
||||||
|
static int8_t dir;
|
||||||
|
static float old_zvalue;
|
||||||
|
if (zvalue != old_zvalue) {
|
||||||
|
dir = zvalue ? zvalue < old_zvalue ? -1 : 1 : 0;
|
||||||
|
old_zvalue = zvalue;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if ENABLED(OVERLAY_GFX_REVERSE)
|
||||||
|
const unsigned char *rot_up = ccw_bmp, *rot_down = cw_bmp;
|
||||||
|
#else
|
||||||
|
const unsigned char *rot_up = cw_bmp, *rot_down = ccw_bmp;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(USE_BIG_EDIT_FONT)
|
||||||
|
const int left = 0, right = 45, nozzle = 95;
|
||||||
|
#else
|
||||||
|
const int left = 5, right = 90, nozzle = 60;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Draw a representation of the nozzle
|
||||||
|
if (PAGE_CONTAINS(3, 16)) u8g.drawBitmapP(nozzle + 6, 4 - dir, 2, 12, nozzle_bmp);
|
||||||
|
if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp);
|
||||||
|
|
||||||
|
// Draw cw/ccw indicator and up/down arrows.
|
||||||
|
if (PAGE_CONTAINS(47, 62)) {
|
||||||
|
u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down);
|
||||||
|
u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up);
|
||||||
|
u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp);
|
||||||
|
u8g.drawBitmapP(left + 20, 49 - dir, 2, 13, down_arrow_bmp);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
|
||||||
|
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
|
|
||||||
void _lcd_babystep(const AxisEnum axis, const char* msg) {
|
void _lcd_babystep(const AxisEnum axis, const char* msg) {
|
||||||
@ -1060,48 +1098,6 @@ void kill_screen(const char* lcd_msg) {
|
|||||||
|
|
||||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||||
|
|
||||||
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
|
|
||||||
void _lcd_babystep_zoffset_overlay(const float zprobe_zoffset) {
|
|
||||||
// Determine whether the user is raising or lowering the nozzle.
|
|
||||||
static int dir = 0;
|
|
||||||
static float old_zprobe_zoffset = 0;
|
|
||||||
if (zprobe_zoffset != old_zprobe_zoffset) {
|
|
||||||
dir = (zprobe_zoffset > old_zprobe_zoffset) ? 1 : -1;
|
|
||||||
old_zprobe_zoffset = zprobe_zoffset;
|
|
||||||
}
|
|
||||||
|
|
||||||
#if ENABLED(BABYSTEP_ZPROBE_GFX_REVERSE)
|
|
||||||
const unsigned char* rot_up = ccw_bmp;
|
|
||||||
const unsigned char* rot_down = cw_bmp;
|
|
||||||
#else
|
|
||||||
const unsigned char* rot_up = cw_bmp;
|
|
||||||
const unsigned char* rot_down = ccw_bmp;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(USE_BIG_EDIT_FONT)
|
|
||||||
const int left = 0,
|
|
||||||
right = 45,
|
|
||||||
nozzle = 95;
|
|
||||||
#else
|
|
||||||
const int left = 5,
|
|
||||||
right = 90,
|
|
||||||
nozzle = 60;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Draw a representation of the nozzle
|
|
||||||
if (PAGE_CONTAINS(3, 16)) u8g.drawBitmapP(nozzle + 6, 4 - dir, 2, 12, nozzle_bmp);
|
|
||||||
if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp);
|
|
||||||
|
|
||||||
// Draw cw/ccw indicator and up/down arrows.
|
|
||||||
if (PAGE_CONTAINS(47, 62)) {
|
|
||||||
u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down);
|
|
||||||
u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up);
|
|
||||||
u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp);
|
|
||||||
u8g.drawBitmapP(left + 20, 49 - dir, 2, 13, down_arrow_bmp);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY
|
|
||||||
|
|
||||||
void lcd_babystep_zoffset() {
|
void lcd_babystep_zoffset() {
|
||||||
if (lcd_clicked) { return lcd_goto_previous_menu_no_defer(); }
|
if (lcd_clicked) { return lcd_goto_previous_menu_no_defer(); }
|
||||||
defer_return_to_status = true;
|
defer_return_to_status = true;
|
||||||
@ -1123,7 +1119,7 @@ void kill_screen(const char* lcd_msg) {
|
|||||||
if (lcdDrawUpdate) {
|
if (lcdDrawUpdate) {
|
||||||
lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset));
|
lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset));
|
||||||
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
|
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
|
||||||
_lcd_babystep_zoffset_overlay(zprobe_zoffset);
|
_lcd_zoffset_overlay_gfx(zprobe_zoffset);
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -1158,8 +1154,12 @@ void kill_screen(const char* lcd_msg) {
|
|||||||
mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0;
|
mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (lcdDrawUpdate)
|
if (lcdDrawUpdate) {
|
||||||
lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value));
|
lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value));
|
||||||
|
#if ENABLED(MESH_EDIT_GFX_OVERLAY)
|
||||||
|
_lcd_zoffset_overlay_gfx(mesh_edit_value);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
void _lcd_mesh_edit_NOP() {
|
void _lcd_mesh_edit_NOP() {
|
||||||
@ -4607,10 +4607,11 @@ void lcd_update() {
|
|||||||
|
|
||||||
lcd_buttons_update();
|
lcd_buttons_update();
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||||
const bool UBL_CONDITION = lcd_external_control;
|
// Don't run the debouncer if UBL owns the display
|
||||||
|
#define UBL_CONDITION !lcd_external_control
|
||||||
#else
|
#else
|
||||||
constexpr bool UBL_CONDITION = true;
|
#define UBL_CONDITION true
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// If the action button is pressed...
|
// If the action button is pressed...
|
||||||
|
Loading…
Reference in New Issue
Block a user