Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each babystep corresponds to around 0.025mm. Smaller than this is largely insignificant for typical layer heights.
This commit is contained in:
parent
3e28243076
commit
e37a1ded0d
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -602,9 +602,9 @@
|
|||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -590,10 +590,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -614,10 +614,10 @@
|
|||||||
*/
|
*/
|
||||||
#define BABYSTEPPING
|
#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -603,10 +603,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -603,10 +603,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -603,10 +603,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -608,10 +608,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -603,10 +603,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
@ -601,10 +601,10 @@
|
|||||||
*/
|
*/
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#if ENABLED(BABYSTEPPING)
|
#if ENABLED(BABYSTEPPING)
|
||||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
|
||||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||||
// Note: Extra time may be added to mitigate controller latency.
|
// Note: Extra time may be added to mitigate controller latency.
|
||||||
|
Loading…
Reference in New Issue
Block a user