diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 6c2870c29..70227df5d 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 25054e446..f82c2f845 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index c27f31895..58b033a32 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
index 6c2870c29..70227df5d 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 1a39169fc..83e44b135 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 4f28ca4dc..f2ea63988 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 1a39169fc..83e44b135 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 10fb90714..a747bd5af 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 751ca853e..c90928176 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index addb02933..6619ebe44 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
index 0c6f6b70c..049da6943 100644
--- a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 1ae3f0a58..44df7a159 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 56668eb8d..cdabd4ede 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 5cfb579c5..61d1bffc5 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index e5060930b..37287989b 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 78a4b2fc0..6bd074850 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 241f8230d..4c4f1d4c9 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 41e0e99b7..80e614834 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 35d60fa51..1b22fbfd4 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 40f5d830c..f4da9508d 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index 4fb7601cc..7b2478cbe 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -198,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index f2614c830..9420b7bea 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 58c860150..a5642bb19 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index ffee54f90..0ca71dc33 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 5c46d357f..9f51c5abc 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 5c46d357f..9f51c5abc 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 5c46d357f..9f51c5abc 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 611b6b614..55f29029a 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -190,7 +190,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index e20860cf7..5f4938def 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 9c9ba3d3f..62dc22be4 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 8564a7ae1..fc9df7169 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index f55d3cf57..e71862f49 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif