diff --git a/.gitignore b/.gitignore index cd72efb10..380a02850 100644 --- a/.gitignore +++ b/.gitignore @@ -1,3 +1,12 @@ +// Our automatic versioning scheme generates the following file +// NEVER put it in the repository +_Version.h + +// All of the following OS, IDE and compiler generated file +// references should be moved from this file +// They are needed, but they belong in your global .gitignore +// rather than in a per-project file such as this + *.o applet/ *~ diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/platform.local.txt b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/platform.local.txt new file mode 100644 index 000000000..ff2ad5d22 --- /dev/null +++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/platform.local.txt @@ -0,0 +1 @@ +compiler.cpp.extra_flags=-DHAS_AUTOMATIC_VERSIONING diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index c7e208472..5d3213e0e 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -10,6 +10,8 @@ #ifndef CONFIGURATION_LCD // Get the LCD defines which are needed first + #define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0) + #define CONFIGURATION_LCD #if defined(MAKRPANEL) @@ -189,6 +191,9 @@ #define ENDSTOPPULLUP_YMIN #define ENDSTOPPULLUP_ZMIN #endif + #ifndef DISABLE_Z_PROBE_ENDSTOP + #define ENDSTOPPULLUP_ZPROBE + #endif #endif /** @@ -276,7 +281,7 @@ #define PS_ON_AWAKE HIGH #define PS_ON_ASLEEP LOW #endif - #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && defined(PS_ON_PIN) && PS_ON_PIN >= 0) + #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON)) /** * Temp Sensor defines @@ -347,25 +352,81 @@ #endif /** - * Shorthand for pin tests, for temperature.cpp + * Shorthand for pin tests, used wherever needed */ - #define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN >= 0 && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 != -2) - #define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN >= 0 && TEMP_SENSOR_1 != 0) - #define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN >= 0 && TEMP_SENSOR_2 != 0) - #define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN >= 0 && TEMP_SENSOR_3 != 0) - #define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN >= 0 && TEMP_SENSOR_BED != 0) - #define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN >= 0) - #define HAS_HEATER_0 (defined(HEATER_0_PIN) && HEATER_0_PIN >= 0) - #define HAS_HEATER_1 (defined(HEATER_1_PIN) && HEATER_1_PIN >= 0) - #define HAS_HEATER_2 (defined(HEATER_2_PIN) && HEATER_2_PIN >= 0) - #define HAS_HEATER_3 (defined(HEATER_3_PIN) && HEATER_3_PIN >= 0) - #define HAS_HEATER_BED (defined(HEATER_BED_PIN) && HEATER_BED_PIN >= 0) - #define HAS_AUTO_FAN_0 (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_1 (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_2 (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN >= 0) - #define HAS_AUTO_FAN_3 (defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN >= 0) + #define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 != -2) + #define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0) + #define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0) + #define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0) + #define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0) + #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0)) + #define HAS_HEATER_1 (PIN_EXISTS(HEATER_1)) + #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2)) + #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3)) + #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED)) + #define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN)) + #define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN)) + #define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN)) + #define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN)) #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3) - #define HAS_FAN (defined(FAN_PIN) && FAN_PIN >= 0) + #define HAS_FAN (PIN_EXISTS(FAN)) + #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN)) + #define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) + #define HAS_SERVO_1 (PIN_EXISTS(SERVO1)) + #define HAS_SERVO_2 (PIN_EXISTS(SERVO2)) + #define HAS_SERVO_3 (PIN_EXISTS(SERVO3)) + #define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && PIN_EXISTS(FILWIDTH)) + #define HAS_FILRUNOUT (PIN_EXISTS(FILRUNOUT)) + #define HAS_HOME (PIN_EXISTS(HOME)) + #define HAS_KILL (PIN_EXISTS(KILL)) + #define HAS_SUICIDE (PIN_EXISTS(SUICIDE)) + #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH)) + #define HAS_X_MIN (PIN_EXISTS(X_MIN)) + #define HAS_X_MAX (PIN_EXISTS(X_MAX)) + #define HAS_Y_MIN (PIN_EXISTS(Y_MIN)) + #define HAS_Y_MAX (PIN_EXISTS(Y_MAX)) + #define HAS_Z_MIN (PIN_EXISTS(Z_MIN)) + #define HAS_Z_MAX (PIN_EXISTS(Z_MAX)) + #define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN)) + #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX)) + #define HAS_Z_PROBE (PIN_EXISTS(Z_PROBE)) + #define HAS_SOLENOID_1 (PIN_EXISTS(SOL1)) + #define HAS_SOLENOID_2 (PIN_EXISTS(SOL2)) + #define HAS_SOLENOID_3 (PIN_EXISTS(SOL3)) + #define HAS_MICROSTEPS (PIN_EXISTS(X_MS1)) + #define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1)) + #define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1)) + #define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1)) + #define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE)) + #define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE)) + #define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE)) + #define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE)) + #define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE)) + #define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE)) + #define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE)) + #define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE)) + #define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE)) + #define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE)) + #define HAS_X_DIR (PIN_EXISTS(X_DIR)) + #define HAS_X2_DIR (PIN_EXISTS(X2_DIR)) + #define HAS_Y_DIR (PIN_EXISTS(Y_DIR)) + #define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR)) + #define HAS_Z_DIR (PIN_EXISTS(Z_DIR)) + #define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR)) + #define HAS_E0_DIR (PIN_EXISTS(E0_DIR)) + #define HAS_E1_DIR (PIN_EXISTS(E1_DIR)) + #define HAS_E2_DIR (PIN_EXISTS(E2_DIR)) + #define HAS_E3_DIR (PIN_EXISTS(E3_DIR)) + #define HAS_X_STEP (PIN_EXISTS(X_STEP)) + #define HAS_X2_STEP (PIN_EXISTS(X2_STEP)) + #define HAS_Y_STEP (PIN_EXISTS(Y_STEP)) + #define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP)) + #define HAS_Z_STEP (PIN_EXISTS(Z_STEP)) + #define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP)) + #define HAS_E0_STEP (PIN_EXISTS(E0_STEP)) + #define HAS_E1_STEP (PIN_EXISTS(E1_STEP)) + #define HAS_E2_STEP (PIN_EXISTS(E2_STEP)) + #define HAS_E3_STEP (PIN_EXISTS(E3_STEP)) /** * Helper Macros for heaters and extruder fan diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 5a6d483bf..7de354f88 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -31,7 +31,7 @@ Here are some standard links for getting your machine calibrated: //=========================================================================== //============================= SCARA Printer =============================== //=========================================================================== -// For a Delta printer replace the configuration files with the files in the +// For a Scara printer replace the configuration files with the files in the // example_configurations/SCARA directory. // @@ -319,6 +319,7 @@ your extruder heater takes 2 minutes to hit the target on heating. // #define ENDSTOPPULLUP_XMIN // #define ENDSTOPPULLUP_YMIN // #define ENDSTOPPULLUP_ZMIN + // #define ENDSTOPPULLUP_ZPROBE #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). @@ -328,8 +329,14 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. +const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop. //#define DISABLE_MAX_ENDSTOPS //#define DISABLE_MIN_ENDSTOPS +// If you want to enable the Z Probe pin, but disable its use, uncomment the line below. +// This only affects a Z Probe Endstop if you have separate Z min endstop as well and have +// activated Z_PROBE_ENDSTOP below. If you are using the Z Min endstop on your Z Probe, +// this has no effect. +//#define DISABLE_Z_PROBE_ENDSTOP // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 #define X_ENABLE_ON 0 @@ -387,11 +394,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MANUAL_BED_LEVELING) +#ifdef MANUAL_BED_LEVELING #define MBL_Z_STEP 0.025 #endif // MANUAL_BED_LEVELING -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -496,6 +503,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -512,8 +533,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings @@ -674,7 +697,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 -// SF send wrong arc g-codes when using Arc Point as fillet procedure +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX // Support for the BariCUDA Paste Extruder. diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index b1da94a30..56de81684 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -3,7 +3,21 @@ * * Configuration and EEPROM storage * - * V16 EEPROM Layout: + * IMPORTANT: Whenever there are changes made to the variables stored in EEPROM + * in the functions below, also increment the version number. This makes sure that + * the default values are used whenever there is a change to the data, to prevent + * wrong data being written to the variables. + * + * ALSO: Variables in the Store and Retrieve sections must be in the same order. + * If a feature is disabled, some data must still be written that, when read, + * either sets a Sane Default, or results in No Change to the existing value. + * + */ + +#define EEPROM_VERSION "V19" + +/** + * V19 EEPROM Layout: * * ver * axis_steps_per_unit (x4) @@ -47,6 +61,9 @@ * Kp[2], Ki[2], Kd[2], Kc[2] * Kp[3], Ki[3], Kd[3], Kc[3] * + * PIDTEMPBED: + * bedKp, bedKi, bedKd + * * DOGLCD: * lcd_contrast * @@ -78,7 +95,7 @@ #include "ultralcd.h" #include "ConfigurationStore.h" -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #include "mesh_bed_leveling.h" #endif // MESH_BED_LEVELING @@ -111,15 +128,6 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) { #define EEPROM_OFFSET 100 - -// IMPORTANT: Whenever there are changes made to the variables stored in EEPROM -// in the functions below, also increment the version number. This makes sure that -// the default values are used whenever there is a change to the data, to prevent -// wrong data being written to the variables. -// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. - -#define EEPROM_VERSION "V18" - #ifdef EEPROM_SETTINGS void Config_StoreSettings() { @@ -194,7 +202,6 @@ void Config_StoreSettings() { EEPROM_WRITE_VAR(i, absPreheatHPBTemp); EEPROM_WRITE_VAR(i, absPreheatFanSpeed); - for (int e = 0; e < 4; e++) { #ifdef PIDTEMP @@ -209,12 +216,10 @@ void Config_StoreSettings() { EEPROM_WRITE_VAR(i, dummy); #endif } - else { - #else // !PIDTEMP - { + else #endif // !PIDTEMP - - dummy = DUMMY_PID_VALUE; + { + dummy = DUMMY_PID_VALUE; // When read, will not change the existing value EEPROM_WRITE_VAR(i, dummy); dummy = 0.0f; for (int q = 3; q--;) EEPROM_WRITE_VAR(i, dummy); @@ -222,6 +227,14 @@ void Config_StoreSettings() { } // Extruders Loop + #ifndef PIDTEMPBED + float bedKp = DUMMY_PID_VALUE, bedKi = DUMMY_PID_VALUE, bedKd = DUMMY_PID_VALUE; + #endif + + EEPROM_WRITE_VAR(i, bedKp); + EEPROM_WRITE_VAR(i, bedKi); + EEPROM_WRITE_VAR(i, bedKd); + #ifndef DOGLCD int lcd_contrast = 32; #endif @@ -308,7 +321,7 @@ void Config_RetrieveSettings() { uint8_t mesh_num_x = 0; uint8_t mesh_num_y = 0; - #if defined(MESH_BED_LEVELING) + #ifdef MESH_BED_LEVELING EEPROM_READ_VAR(i, mbl.active); EEPROM_READ_VAR(i, mesh_num_x); EEPROM_READ_VAR(i, mesh_num_y); @@ -364,7 +377,7 @@ void Config_RetrieveSettings() { #ifdef PIDTEMP for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin - EEPROM_READ_VAR(i, dummy); + EEPROM_READ_VAR(i, dummy); // Kp if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) { // do not need to scale PID values as the values in EEPROM are already scaled PID_PARAM(Kp, e) = dummy; @@ -385,6 +398,20 @@ void Config_RetrieveSettings() { for (int q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc #endif // !PIDTEMP + #ifndef PIDTEMPBED + float bedKp, bedKi, bedKd; + #endif + + EEPROM_READ_VAR(i, dummy); // bedKp + if (dummy != DUMMY_PID_VALUE) { + bedKp = dummy; + EEPROM_READ_VAR(i, bedKi); + EEPROM_READ_VAR(i, bedKd); + } + else { + for (int q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd + } + #ifndef DOGLCD int lcd_contrast; #endif @@ -517,6 +544,12 @@ void Config_ResetDefault() { updatePID(); #endif // PIDTEMP + #ifdef PIDTEMPBED + bedKp = DEFAULT_bedKp; + bedKi = scalePID_i(DEFAULT_bedKi); + bedKd = scalePID_d(DEFAULT_bedKd); + #endif + #ifdef FWRETRACT autoretract_enabled = false; retract_length = RETRACT_LENGTH; @@ -660,17 +693,28 @@ void Config_PrintSettings(bool forReplay) { SERIAL_EOL; #endif // DELTA - #ifdef PIDTEMP + #if defined(PIDTEMP) || defined(PIDTEMPBED) SERIAL_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("PID settings:"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echos values for E0 - SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); - SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); - SERIAL_EOL; - #endif // PIDTEMP + #if defined(PIDTEMP) && defined(PIDTEMPBED) + SERIAL_EOL; + #endif + #ifdef PIDTEMP + SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echos values for E0 + SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); + SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); + SERIAL_EOL; + #endif + #ifdef PIDTEMPBED + SERIAL_ECHOPAIR(" M304 P", bedKp); // for compatibility with hosts, only echos values for E0 + SERIAL_ECHOPAIR(" I", unscalePID_i(bedKi)); + SERIAL_ECHOPAIR(" D", unscalePID_d(bedKd)); + SERIAL_EOL; + #endif + #endif #ifdef FWRETRACT @@ -679,7 +723,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M207 S", retract_length); + SERIAL_ECHOPAIR(" M207 S", retract_length); SERIAL_ECHOPAIR(" F", retract_feedrate*60); SERIAL_ECHOPAIR(" Z", retract_zlift); SERIAL_EOL; @@ -688,7 +732,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M208 S", retract_recover_length); + SERIAL_ECHOPAIR(" M208 S", retract_recover_length); SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60); SERIAL_EOL; SERIAL_ECHO_START; @@ -696,7 +740,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0)); + SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0)); SERIAL_EOL; #if EXTRUDERS > 1 @@ -720,20 +764,20 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Filament settings:"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M200 D", filament_size[0]); + SERIAL_ECHOPAIR(" M200 D", filament_size[0]); SERIAL_EOL; #if EXTRUDERS > 1 SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); + SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]); SERIAL_EOL; #if EXTRUDERS > 2 SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); + SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); SERIAL_EOL; #if EXTRUDERS > 3 SERIAL_ECHO_START; - SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); + SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]); SERIAL_EOL; #endif #endif @@ -752,7 +796,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); SERIAL_ECHO_START; } - SERIAL_ECHOPAIR(" M", (unsigned long)CUSTOM_M_CODE_SET_Z_PROBE_OFFSET); + SERIAL_ECHOPAIR(" M", (unsigned long)CUSTOM_M_CODE_SET_Z_PROBE_OFFSET); SERIAL_ECHOPAIR(" Z", -zprobe_zoffset); #else if (!forReplay) { diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index d689ac47f..4ed188946 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index e0441714b..36e054eec 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -62,59 +62,57 @@ #define MYSERIAL MSerial #endif -#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x)) -#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y)) -#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x))) -#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n')) -#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n')) +#define SERIAL_CHAR(x) MYSERIAL.write(x) +#define SERIAL_EOL SERIAL_CHAR('\n') + +#define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x) +#define SERIAL_PROTOCOL(x) MYSERIAL.print(x) +#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y) +#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x)) +#define SERIAL_PROTOCOLLN(x) do{ MYSERIAL.print(x),MYSERIAL.write('\n'); }while(0) +#define SERIAL_PROTOCOLLNPGM(x) do{ serialprintPGM(PSTR(x)),MYSERIAL.write('\n'); }while(0) extern const char errormagic[] PROGMEM; extern const char echomagic[] PROGMEM; -#define SERIAL_ERROR_START (serialprintPGM(errormagic)) +#define SERIAL_ERROR_START serialprintPGM(errormagic) #define SERIAL_ERROR(x) SERIAL_PROTOCOL(x) #define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x) #define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x) #define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x) -#define SERIAL_ECHO_START (serialprintPGM(echomagic)) +#define SERIAL_ECHO_START serialprintPGM(echomagic) #define SERIAL_ECHO(x) SERIAL_PROTOCOL(x) #define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x) #define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x) #define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x) -#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value))) - -#define SERIAL_EOL MYSERIAL.write('\n') +#define SERIAL_ECHOPAIR(name,value) do{ serial_echopair_P(PSTR(name),(value)); }while(0) void serial_echopair_P(const char *s_P, float v); void serial_echopair_P(const char *s_P, double v); void serial_echopair_P(const char *s_P, unsigned long v); -//Things to write to serial from Program memory. Saves 400 to 2k of RAM. -FORCE_INLINE void serialprintPGM(const char *str) -{ - char ch=pgm_read_byte(str); - while(ch) - { +// Things to write to serial from Program memory. Saves 400 to 2k of RAM. +FORCE_INLINE void serialprintPGM(const char *str) { + char ch; + while ((ch = pgm_read_byte(str))) { MYSERIAL.write(ch); - ch=pgm_read_byte(++str); + str++; } } - void get_command(); void process_commands(); void manage_inactivity(bool ignore_stepper_queue=false); -#if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \ - && defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1 +#if defined(DUAL_X_CARRIAGE) && HAS_X_ENABLE && HAS_X2_ENABLE #define enable_x() do { X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); } while (0) #define disable_x() do { X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; } while (0) -#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 +#elif HAS_X_ENABLE #define enable_x() X_ENABLE_WRITE( X_ENABLE_ON) #define disable_x() { X_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; } #else @@ -122,7 +120,7 @@ void manage_inactivity(bool ignore_stepper_queue=false); #define disable_x() ; #endif -#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1 +#if HAS_Y_ENABLE #ifdef Y_DUAL_STEPPER_DRIVERS #define enable_y() { Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); } #define disable_y() { Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; } @@ -135,7 +133,7 @@ void manage_inactivity(bool ignore_stepper_queue=false); #define disable_y() ; #endif -#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1 +#if HAS_Z_ENABLE #ifdef Z_DUAL_STEPPER_DRIVERS #define enable_z() { Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); } #define disable_z() { Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; } @@ -148,40 +146,53 @@ void manage_inactivity(bool ignore_stepper_queue=false); #define disable_z() ; #endif -#if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1) - #define enable_e0() E0_ENABLE_WRITE(E_ENABLE_ON) +#if HAS_E0_ENABLE + #define enable_e0() E0_ENABLE_WRITE( E_ENABLE_ON) #define disable_e0() E0_ENABLE_WRITE(!E_ENABLE_ON) #else #define enable_e0() /* nothing */ #define disable_e0() /* nothing */ #endif -#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1) - #define enable_e1() E1_ENABLE_WRITE(E_ENABLE_ON) +#if (EXTRUDERS > 1) && HAS_E1_ENABLE + #define enable_e1() E1_ENABLE_WRITE( E_ENABLE_ON) #define disable_e1() E1_ENABLE_WRITE(!E_ENABLE_ON) #else #define enable_e1() /* nothing */ #define disable_e1() /* nothing */ #endif -#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1) - #define enable_e2() E2_ENABLE_WRITE(E_ENABLE_ON) +#if (EXTRUDERS > 2) && HAS_E2_ENABLE + #define enable_e2() E2_ENABLE_WRITE( E_ENABLE_ON) #define disable_e2() E2_ENABLE_WRITE(!E_ENABLE_ON) #else #define enable_e2() /* nothing */ #define disable_e2() /* nothing */ #endif -#if (EXTRUDERS > 3) && defined(E3_ENABLE_PIN) && (E3_ENABLE_PIN > -1) - #define enable_e3() E3_ENABLE_WRITE(E_ENABLE_ON) +#if (EXTRUDERS > 3) && HAS_E3_ENABLE + #define enable_e3() E3_ENABLE_WRITE( E_ENABLE_ON) #define disable_e3() E3_ENABLE_WRITE(!E_ENABLE_ON) #else #define enable_e3() /* nothing */ #define disable_e3() /* nothing */ #endif +/** + * The axis order in all axis related arrays is X, Y, Z, E + */ +#define NUM_AXIS 4 + +/** + * Axis indices as enumerated constants + * + * A_AXIS and B_AXIS are used by COREXY printers + * X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots. + */ enum AxisEnum {X_AXIS=0, Y_AXIS=1, A_AXIS=0, B_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5}; -//X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots. + +void enable_all_steppers(); +void disable_all_steppers(); void FlushSerialRequestResend(); void ClearToSend(); @@ -194,7 +205,6 @@ void get_coordinates(); void adjust_delta(float cartesian[3]); #endif extern float delta[3]; - void prepare_move_raw(); #endif #ifdef SCARA void calculate_delta(float cartesian[3]); @@ -217,7 +227,8 @@ void enquecommands_P(const char *cmd); //put one or many ASCII commands at the e void prepare_arc_move(char isclockwise); void clamp_to_software_endstops(float target[3]); -void refresh_cmd_timeout(void); +extern unsigned long previous_millis_cmd; +inline void refresh_cmd_timeout() { previous_millis_cmd = millis(); } #ifdef FAST_PWM_FAN void setPwmFrequency(uint8_t pin, int val); @@ -226,7 +237,7 @@ void refresh_cmd_timeout(void); #ifndef CRITICAL_SECTION_START #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); #define CRITICAL_SECTION_END SREG = _sreg; -#endif //CRITICAL_SECTION_START +#endif extern float homing_feedrate[]; extern bool axis_relative_modes[]; @@ -235,8 +246,9 @@ extern bool volumetric_enabled; extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder. extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner -extern float current_position[NUM_AXIS] ; +extern float current_position[NUM_AXIS]; extern float home_offset[3]; + #ifdef DELTA extern float endstop_adj[3]; extern float delta_radius; @@ -244,18 +256,23 @@ extern float home_offset[3]; extern float delta_segments_per_second; void recalc_delta_settings(float radius, float diagonal_rod); #elif defined(Z_DUAL_ENDSTOPS) -extern float z_endstop_adj; + extern float z_endstop_adj; #endif + #ifdef SCARA extern float axis_scaling[3]; // Build size scaling #endif + extern float min_pos[3]; extern float max_pos[3]; extern bool axis_known_position[3]; + #ifdef ENABLE_AUTO_BED_LEVELING extern float zprobe_zoffset; #endif + extern int fanSpeed; + #ifdef BARICUDA extern int ValvePressure; extern int EtoPPressure; diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp index d8477b6db..dc36e14c6 100644 --- a/Marlin/MarlinSerial.cpp +++ b/Marlin/MarlinSerial.cpp @@ -268,8 +268,7 @@ void MarlinSerial::printFloat(double number, uint8_t digits) { print(int_part); // Print the decimal point, but only if there are digits beyond - if (digits > 0) - print("."); + if (digits > 0) print('.'); // Extract digits from the remainder one at a time while (digits-- > 0) { @@ -288,7 +287,6 @@ MarlinSerial MSerial; #endif // !AT90USB // For AT90USB targets use the UART for BT interfacing -#if defined(AT90USB) && defined (BTENABLED) - HardwareSerial bt; +#if defined(AT90USB) && defined(BTENABLED) + HardwareSerial bt; #endif - diff --git a/Marlin/MarlinSerial.h b/Marlin/MarlinSerial.h index b56880c23..dbad3fd76 100644 --- a/Marlin/MarlinSerial.h +++ b/Marlin/MarlinSerial.h @@ -153,8 +153,8 @@ extern MarlinSerial MSerial; #endif // !AT90USB // Use the UART for BT in AT90USB configurations -#if defined(AT90USB) && defined (BTENABLED) - extern HardwareSerial bt; +#if defined(AT90USB) && defined(BTENABLED) + extern HardwareSerial bt; #endif #endif diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index a327f209d..1b9260de5 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -36,11 +36,11 @@ #endif #endif // ENABLE_AUTO_BED_LEVELING -#define SERVO_LEVELING defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0 +#define SERVO_LEVELING (defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0) -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #include "mesh_bed_leveling.h" -#endif // MESH_BED_LEVELING +#endif #include "ultralcd.h" #include "planner.h" @@ -110,6 +110,7 @@ // Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include). // The '#' is necessary when calling from within sd files, as it stops buffer prereading // M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. +// M48 - Measure Z_Probe repeatability. M48 [n # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel] // M80 - Turn on Power Supply // M81 - Turn off Power Supply // M82 - Set E codes absolute (default) @@ -202,10 +203,6 @@ #endif float homing_feedrate[] = HOMING_FEEDRATE; -#ifdef ENABLE_AUTO_BED_LEVELING - int xy_travel_speed = XY_TRAVEL_SPEED; - float zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER; -#endif int homing_bump_divisor[] = HOMING_BUMP_DIVISOR; bool axis_relative_modes[] = AXIS_RELATIVE_MODES; int feedmultiply = 100; //100->1 200->2 @@ -216,15 +213,49 @@ float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_NOMINAL_FILAMENT_DIA float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS(1.0, 1.0, 1.0, 1.0); float current_position[NUM_AXIS] = { 0.0 }; float home_offset[3] = { 0 }; -#ifdef DELTA - float endstop_adj[3] = { 0 }; -#elif defined(Z_DUAL_ENDSTOPS) - float z_endstop_adj = 0; -#endif - float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; bool axis_known_position[3] = { false }; +uint8_t active_extruder = 0; +int fanSpeed = 0; +bool cancel_heatup = false; +const char errormagic[] PROGMEM = "Error:"; +const char echomagic[] PROGMEM = "echo:"; +const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; +static float destination[NUM_AXIS] = { 0 }; +static float offset[3] = { 0 }; +static float feedrate = 1500.0, next_feedrate, saved_feedrate; +static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; +static bool relative_mode = false; //Determines Absolute or Relative Coordinates +static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; +static int bufindr = 0; +static int bufindw = 0; +static int buflen = 0; +static char serial_char; +static int serial_count = 0; +static boolean comment_mode = false; +static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) +const char* queued_commands_P= NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */ +const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 +// Inactivity shutdown +unsigned long previous_millis_cmd = 0; +static unsigned long max_inactive_time = 0; +static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; +unsigned long starttime = 0; ///< Print job start time +unsigned long stoptime = 0; ///< Print job stop time +static uint8_t target_extruder; +bool Stopped = false; +bool CooldownNoWait = true; +bool target_direction; + +#ifdef ENABLE_AUTO_BED_LEVELING + int xy_travel_speed = XY_TRAVEL_SPEED; + float zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER; +#endif + +#if defined(Z_DUAL_ENDSTOPS) && !defined(DELTA) + float z_endstop_adj = 0; +#endif // Extruder offsets #if EXTRUDERS > 1 @@ -243,9 +274,6 @@ bool axis_known_position[3] = { false }; }; #endif -uint8_t active_extruder = 0; -int fanSpeed = 0; - #ifdef SERVO_ENDSTOPS int servo_endstops[] = SERVO_ENDSTOPS; int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES; @@ -283,9 +311,10 @@ int fanSpeed = 0; #endif #ifdef DELTA - float delta[3] = { 0, 0, 0 }; + float delta[3] = { 0 }; #define SIN_60 0.8660254037844386 #define COS_60 0.5 + float endstop_adj[3] = { 0 }; // these are the default values, can be overriden with M665 float delta_radius = DELTA_RADIUS; float delta_tower1_x = -SIN_60 * delta_radius; // front left tower @@ -298,17 +327,18 @@ int fanSpeed = 0; float delta_diagonal_rod_2 = sq(delta_diagonal_rod); float delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND; #ifdef ENABLE_AUTO_BED_LEVELING + int delta_grid_spacing[2] = { 0, 0 }; float bed_level[AUTO_BED_LEVELING_GRID_POINTS][AUTO_BED_LEVELING_GRID_POINTS]; #endif +#else + static bool home_all_axis = true; #endif #ifdef SCARA + static float delta[3] = { 0 }; float axis_scaling[3] = { 1, 1, 1 }; // Build size scaling, default to 1 - static float delta[3] = { 0, 0, 0 }; #endif -bool cancel_heatup = false; - #ifdef FILAMENT_SENSOR //Variables for Filament Sensor input float filament_width_nominal = DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404 @@ -325,67 +355,21 @@ bool cancel_heatup = false; static bool filrunoutEnqued = false; #endif -const char errormagic[] PROGMEM = "Error:"; -const char echomagic[] PROGMEM = "echo:"; - -const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; -static float destination[NUM_AXIS] = { 0 }; - -static float offset[3] = { 0 }; - -#ifndef DELTA - static bool home_all_axis = true; -#endif - -static float feedrate = 1500.0, next_feedrate, saved_feedrate; -static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; - -static bool relative_mode = false; //Determines Absolute or Relative Coordinates - -static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; #ifdef SDSUPPORT static bool fromsd[BUFSIZE]; #endif -static int bufindr = 0; -static int bufindw = 0; -static int buflen = 0; - -static char serial_char; -static int serial_count = 0; -static boolean comment_mode = false; -static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) - -const char* queued_commands_P= NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */ - -const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 - -// Inactivity shutdown -static unsigned long previous_millis_cmd = 0; -static unsigned long max_inactive_time = 0; -static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; - -unsigned long starttime = 0; ///< Print job start time -unsigned long stoptime = 0; ///< Print job stop time - -static uint8_t tmp_extruder; - - -bool Stopped = false; #if NUM_SERVOS > 0 Servo servos[NUM_SERVOS]; #endif -bool CooldownNoWait = true; -bool target_direction; - #ifdef CHDK unsigned long chdkHigh = 0; boolean chdkActive = false; #endif //=========================================================================== -//=============================Routines====================================== +//================================ Functions ================================ //=========================================================================== void get_arc_coordinates(); @@ -422,26 +406,24 @@ void serial_echopair_P(const char *s_P, unsigned long v) //Injects the next command from the pending sequence of commands, when possible //Return false if and only if no command was pending -static bool drain_queued_commands_P() -{ - char cmd[30]; - if(!queued_commands_P) - return false; +static bool drain_queued_commands_P() { + if (!queued_commands_P) return false; + // Get the next 30 chars from the sequence of gcodes to run - strncpy_P(cmd, queued_commands_P, sizeof(cmd)-1); - cmd[sizeof(cmd)-1]= 0; + char cmd[30]; + strncpy_P(cmd, queued_commands_P, sizeof(cmd) - 1); + cmd[sizeof(cmd) - 1] = '\0'; + // Look for the end of line, or the end of sequence - size_t i= 0; + size_t i = 0; char c; - while( (c= cmd[i]) && c!='\n' ) - ++i; // look for the end of this gcode command - cmd[i]= 0; - if(enquecommand(cmd)) // buffer was not full (else we will retry later) - { - if(c) - queued_commands_P+= i+1; // move to next command + while((c = cmd[i]) && c != '\n') i++; // find the end of this gcode command + cmd[i] = '\0'; + if (enquecommand(cmd)) { // buffer was not full (else we will retry later) + if (c) + queued_commands_P += i + 1; // move to next command else - queued_commands_P= NULL; // will have no more commands in the sequence + queued_commands_P = NULL; // will have no more commands in the sequence } return true; } @@ -449,10 +431,9 @@ static bool drain_queued_commands_P() //Record one or many commands to run from program memory. //Aborts the current queue, if any. //Note: drain_queued_commands_P() must be called repeatedly to drain the commands afterwards -void enquecommands_P(const char* pgcode) -{ - queued_commands_P= pgcode; - drain_queued_commands_P(); // first command exectuted asap (when possible) +void enquecommands_P(const char* pgcode) { + queued_commands_P = pgcode; + drain_queued_commands_P(); // first command executed asap (when possible) } //adds a single command to the main command buffer, from RAM @@ -478,42 +459,42 @@ bool enquecommand(const char *cmd) void setup_killpin() { - #if defined(KILL_PIN) && KILL_PIN > -1 + #if HAS_KILL SET_INPUT(KILL_PIN); - WRITE(KILL_PIN,HIGH); + WRITE(KILL_PIN, HIGH); #endif } void setup_filrunoutpin() { -#if defined(FILRUNOUT_PIN) && FILRUNOUT_PIN > -1 - pinMode(FILRUNOUT_PIN,INPUT); - #if defined(ENDSTOPPULLUP_FIL_RUNOUT) - WRITE(FILLRUNOUT_PIN,HIGH); - #endif -#endif + #if HAS_FILRUNOUT + pinMode(FILRUNOUT_PIN, INPUT); + #ifdef ENDSTOPPULLUP_FIL_RUNOUT + WRITE(FILLRUNOUT_PIN, HIGH); + #endif + #endif } // Set home pin void setup_homepin(void) { -#if defined(HOME_PIN) && HOME_PIN > -1 - SET_INPUT(HOME_PIN); - WRITE(HOME_PIN,HIGH); -#endif + #if HAS_HOME + SET_INPUT(HOME_PIN); + WRITE(HOME_PIN, HIGH); + #endif } void setup_photpin() { - #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1 + #if HAS_PHOTOGRAPH OUT_WRITE(PHOTOGRAPH_PIN, LOW); #endif } void setup_powerhold() { - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, HIGH); #endif #if HAS_POWER_SWITCH @@ -527,37 +508,31 @@ void setup_powerhold() void suicide() { - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, LOW); #endif } void servo_init() { - #if (NUM_SERVOS >= 1) && defined(SERVO0_PIN) && (SERVO0_PIN > -1) + #if NUM_SERVOS >= 1 && HAS_SERVO_0 servos[0].attach(SERVO0_PIN); #endif - #if (NUM_SERVOS >= 2) && defined(SERVO1_PIN) && (SERVO1_PIN > -1) + #if NUM_SERVOS >= 2 && HAS_SERVO_1 servos[1].attach(SERVO1_PIN); #endif - #if (NUM_SERVOS >= 3) && defined(SERVO2_PIN) && (SERVO2_PIN > -1) + #if NUM_SERVOS >= 3 && HAS_SERVO_2 servos[2].attach(SERVO2_PIN); #endif - #if (NUM_SERVOS >= 4) && defined(SERVO3_PIN) && (SERVO3_PIN > -1) + #if NUM_SERVOS >= 4 && HAS_SERVO_3 servos[3].attach(SERVO3_PIN); #endif - #if (NUM_SERVOS >= 5) - #error "TODO: enter initalisation code for more servos" - #endif // Set position of Servo Endstops that are defined #ifdef SERVO_ENDSTOPS - for(int8_t i = 0; i < 3; i++) - { - if(servo_endstops[i] > -1) { + for (int i = 0; i < 3; i++) + if (servo_endstops[i] >= 0) servos[servo_endstops[i]].write(servo_endstop_angles[i * 2 + 1]); - } - } #endif #if SERVO_LEVELING @@ -624,7 +599,7 @@ void setup() lcd_init(); _delay_ms(1000); // wait 1sec to display the splash screen - #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1 + #if HAS_CONTROLLERFAN SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan #endif @@ -648,47 +623,37 @@ void setup() } -void loop() -{ - if(buflen < (BUFSIZE-1)) - get_command(); +void loop() { + if (buflen < BUFSIZE - 1) get_command(); + #ifdef SDSUPPORT - card.checkautostart(false); + card.checkautostart(false); #endif - if(buflen) - { + + if (buflen) { #ifdef SDSUPPORT - if(card.saving) - { - if(strstr_P(cmdbuffer[bufindr], PSTR("M29")) == NULL) - { + if (card.saving) { + if (strstr_P(cmdbuffer[bufindr], PSTR("M29")) == NULL) { card.write_command(cmdbuffer[bufindr]); - if(card.logging) - { + if (card.logging) process_commands(); - } else - { SERIAL_PROTOCOLLNPGM(MSG_OK); - } } - else - { + else { card.closefile(); SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED); } } else - { process_commands(); - } #else process_commands(); - #endif //SDSUPPORT - buflen = (buflen-1); - bufindr = (bufindr + 1)%BUFSIZE; + #endif // SDSUPPORT + buflen--; + bufindr = (bufindr + 1) % BUFSIZE; } - //check heater every n milliseconds + // Check heater every n milliseconds manage_heater(); manage_inactivity(); checkHitEndstops(); @@ -697,7 +662,7 @@ void loop() void get_command() { - if(drain_queued_commands_P()) // priority is given to non-serial commands + if (drain_queued_commands_P()) // priority is given to non-serial commands return; while( MYSERIAL.available() > 0 && buflen < BUFSIZE) { @@ -892,7 +857,9 @@ float code_value() { return ret; } -long code_value_long() { return (strtol(strchr_pointer + 1, NULL, 10)); } +long code_value_long() { return strtol(strchr_pointer + 1, NULL, 10); } + +int16_t code_value_short() { return (int16_t)strtol(strchr_pointer + 1, NULL, 10); } bool code_seen(char code) { strchr_pointer = strchr(cmdbuffer[bufindr], code); @@ -916,7 +883,7 @@ XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS); XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS); XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS); XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH); -XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); +XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); #ifdef DUAL_X_CARRIAGE @@ -1040,9 +1007,23 @@ inline void sync_plan_position() { plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]); } #endif +inline void set_current_to_destination() { memcpy(current_position, destination, sizeof(current_position)); } +inline void set_destination_to_current() { memcpy(destination, current_position, sizeof(destination)); } #ifdef ENABLE_AUTO_BED_LEVELING + #ifdef DELTA + /** + * Calculate delta, start a line, and set current_position to destination + */ + void prepare_move_raw() { + refresh_cmd_timeout(); + calculate_delta(destination); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); + set_current_to_destination(); + } + #endif + #ifdef AUTO_BED_LEVELING_GRID #ifndef DELTA @@ -1132,7 +1113,7 @@ inline void sync_plan_position() { plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS]); // move up the retract distance - zPosition += home_retract_mm(Z_AXIS); + zPosition += home_bump_mm(Z_AXIS); line_to_z(zPosition); st_synchronize(); endstops_hit_on_purpose(); // clear endstop hit flags @@ -1145,7 +1126,7 @@ inline void sync_plan_position() { SERIAL_ECHOLN("Warning: The Homing Bump Feedrate Divisor cannot be less than 1"); } - zPosition -= home_retract_mm(Z_AXIS) * 2; + zPosition -= home_bump_mm(Z_AXIS) * 2; line_to_z(zPosition); st_synchronize(); endstops_hit_on_purpose(); // clear endstop hit flags @@ -1157,6 +1138,9 @@ inline void sync_plan_position() { #endif // !DELTA } + /** + * + */ static void do_blocking_move_to(float x, float y, float z) { float oldFeedRate = feedrate; @@ -1194,7 +1178,7 @@ inline void sync_plan_position() { saved_feedrate = feedrate; saved_feedmultiply = feedmultiply; feedmultiply = 100; - previous_millis_cmd = millis(); + refresh_cmd_timeout(); enable_endstops(true); } @@ -1204,10 +1188,10 @@ inline void sync_plan_position() { #endif feedrate = saved_feedrate; feedmultiply = saved_feedmultiply; - previous_millis_cmd = millis(); + refresh_cmd_timeout(); } - static void engage_z_probe() { + static void deploy_z_probe() { #ifdef SERVO_ENDSTOPS @@ -1244,9 +1228,15 @@ inline void sync_plan_position() { prepare_move_raw(); st_synchronize(); - + + #ifdef Z_PROBE_ENDSTOP + bool z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING); + if (z_probe_endstop) + #else bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING); - if (z_min_endstop) { + if (z_min_endstop) + #endif + { if (!Stopped) { SERIAL_ERROR_START; SERIAL_ERRORLNPGM("Z-Probe failed to engage!"); @@ -1259,7 +1249,7 @@ inline void sync_plan_position() { } - static void retract_z_probe() { + static void stow_z_probe() { #ifdef SERVO_ENDSTOPS @@ -1291,19 +1281,19 @@ inline void sync_plan_position() { prepare_move_raw(); // Move to the start position to initiate retraction - destination[X_AXIS] = Z_PROBE_ALLEN_KEY_RETRACT_X; - destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_RETRACT_Y; - destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_RETRACT_Z; + destination[X_AXIS] = Z_PROBE_ALLEN_KEY_STOW_X; + destination[Y_AXIS] = Z_PROBE_ALLEN_KEY_STOW_Y; + destination[Z_AXIS] = Z_PROBE_ALLEN_KEY_STOW_Z; prepare_move_raw(); // Move the nozzle down to push the probe into retracted position feedrate = homing_feedrate[Z_AXIS]/10; - destination[Z_AXIS] = current_position[Z_AXIS] - Z_PROBE_ALLEN_KEY_RETRACT_DEPTH; + destination[Z_AXIS] = current_position[Z_AXIS] - Z_PROBE_ALLEN_KEY_STOW_DEPTH; prepare_move_raw(); // Move up for safety feedrate = homing_feedrate[Z_AXIS]/2; - destination[Z_AXIS] = current_position[Z_AXIS] + Z_PROBE_ALLEN_KEY_RETRACT_DEPTH * 2; + destination[Z_AXIS] = current_position[Z_AXIS] + Z_PROBE_ALLEN_KEY_STOW_DEPTH * 2; prepare_move_raw(); // Home XY for safety @@ -1313,9 +1303,15 @@ inline void sync_plan_position() { prepare_move_raw(); st_synchronize(); - + + #ifdef Z_PROBE_ENDSTOP + bool z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING); + if (!z_probe_endstop) + #else bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING); - if (!z_min_endstop) { + if (!z_min_endstop) + #endif + { if (!Stopped) { SERIAL_ERROR_START; SERIAL_ERRORLNPGM("Z-Probe failed to retract!"); @@ -1329,20 +1325,20 @@ inline void sync_plan_position() { } enum ProbeAction { - ProbeStay = 0, - ProbeEngage = BIT(0), - ProbeRetract = BIT(1), - ProbeEngageAndRetract = (ProbeEngage | ProbeRetract) + ProbeStay = 0, + ProbeDeploy = BIT(0), + ProbeStow = BIT(1), + ProbeDeployAndStow = (ProbeDeploy | ProbeStow) }; // Probe bed height at position (x,y), returns the measured z value - static float probe_pt(float x, float y, float z_before, ProbeAction retract_action=ProbeEngageAndRetract, int verbose_level=1) { + static float probe_pt(float x, float y, float z_before, ProbeAction retract_action=ProbeDeployAndStow, int verbose_level=1) { // move to right place do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z_before); do_blocking_move_to(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER, current_position[Z_AXIS]); #if !defined(Z_PROBE_SLED) && !defined(Z_PROBE_ALLEN_KEY) - if (retract_action & ProbeEngage) engage_z_probe(); + if (retract_action & ProbeDeploy) deploy_z_probe(); #endif run_z_probe(); @@ -1356,7 +1352,7 @@ inline void sync_plan_position() { #endif #if !defined(Z_PROBE_SLED) && !defined(Z_PROBE_ALLEN_KEY) - if (retract_action & ProbeRetract) retract_z_probe(); + if (retract_action & ProbeStow) stow_z_probe(); #endif if (verbose_level > 2) { @@ -1416,9 +1412,9 @@ inline void sync_plan_position() { for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) { for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) { SERIAL_PROTOCOL_F(bed_level[x][y], 2); - SERIAL_PROTOCOLPGM(" "); + SERIAL_PROTOCOLCHAR(' '); } - SERIAL_ECHOLN(""); + SERIAL_EOL; } } @@ -1460,10 +1456,10 @@ static void homeaxis(int axis) { sync_plan_position(); // Engage Servo endstop if enabled - #ifdef SERVO_ENDSTOPS && !defined(Z_PROBE_SLED) + #if defined(SERVO_ENDSTOPS) && !defined(Z_PROBE_SLED) #if SERVO_LEVELING - if (axis == Z_AXIS) engage_z_probe(); else + if (axis == Z_AXIS) deploy_z_probe(); else #endif { if (servo_endstops[axis] > -1) @@ -1486,8 +1482,8 @@ static void homeaxis(int axis) { current_position[axis] = 0; sync_plan_position(); - // Move away from the endstop by the axis HOME_RETRACT_MM - destination[axis] = -home_retract_mm(axis) * axis_home_dir; + // Move away from the endstop by the axis HOME_BUMP_MM + destination[axis] = -home_bump_mm(axis) * axis_home_dir; line_to_destination(); st_synchronize(); @@ -1500,7 +1496,7 @@ static void homeaxis(int axis) { } // Move slowly towards the endstop until triggered - destination[axis] = 2 * home_retract_mm(axis) * axis_home_dir; + destination[axis] = 2 * home_bump_mm(axis) * axis_home_dir; line_to_destination(); st_synchronize(); @@ -1554,14 +1550,12 @@ static void homeaxis(int axis) { #endif #if SERVO_LEVELING && !defined(Z_PROBE_SLED) - if (axis == Z_AXIS) retract_z_probe(); + if (axis == Z_AXIS) stow_z_probe(); #endif } } -void refresh_cmd_timeout(void) { previous_millis_cmd = millis(); } - #ifdef FWRETRACT void retract(bool retracting, bool swapretract = false) { @@ -1570,7 +1564,7 @@ void refresh_cmd_timeout(void) { previous_millis_cmd = millis(); } float oldFeedrate = feedrate; - for (int i = 0; i < NUM_AXIS; i++) destination[i] = current_position[i]; + set_destination_to_current(); if (retracting) { @@ -1592,7 +1586,7 @@ void refresh_cmd_timeout(void) { previous_millis_cmd = millis(); } else { if (retract_zlift > 0.01) { - current_position[Z_AXIS] + =retract_zlift; + current_position[Z_AXIS] += retract_zlift; #ifdef DELTA sync_plan_position_delta(); #else @@ -1693,7 +1687,7 @@ inline void gcode_G2_G3(bool clockwise) { * G4: Dwell S or P */ inline void gcode_G4() { - unsigned long codenum=0; + unsigned long codenum = 0; LCD_MESSAGEPGM(MSG_DWELL); @@ -1701,9 +1695,9 @@ inline void gcode_G4() { if (code_seen('S')) codenum = code_value_long() * 1000; // seconds to wait st_synchronize(); - previous_millis_cmd = millis(); + refresh_cmd_timeout(); codenum += previous_millis_cmd; // keep track of when we started waiting - while(millis() < codenum) { + while (millis() < codenum) { manage_heater(); manage_inactivity(); lcd_update(); @@ -1719,7 +1713,7 @@ inline void gcode_G4() { inline void gcode_G10_G11(bool doRetract=false) { #if EXTRUDERS > 1 if (doRetract) { - retracted_swap[active_extruder] = (code_seen('S') && code_value_long() == 1); // checks for swap retract argument + retracted_swap[active_extruder] = (code_seen('S') && code_value_short() == 1); // checks for swap retract argument } #endif retract(doRetract @@ -1753,14 +1747,17 @@ inline void gcode_G4() { * Zn Home Z, setting Z to n + home_offset[Z_AXIS] */ inline void gcode_G28() { + + // For auto bed leveling, clear the level matrix #ifdef ENABLE_AUTO_BED_LEVELING - plan_bed_level_matrix.set_to_identity(); //Reset the plane ("erase" all leveling data) + plan_bed_level_matrix.set_to_identity(); #ifdef DELTA reset_bed_level(); #endif #endif - #if defined(MESH_BED_LEVELING) + // For manual bed leveling deactivate the matrix temporarily + #ifdef MESH_BED_LEVELING uint8_t mbl_was_active = mbl.active; mbl.active = 0; #endif @@ -1768,11 +1765,11 @@ inline void gcode_G28() { saved_feedrate = feedrate; saved_feedmultiply = feedmultiply; feedmultiply = 100; - previous_millis_cmd = millis(); + refresh_cmd_timeout(); enable_endstops(true); - for (int i = 0; i < NUM_AXIS; i++) destination[i] = current_position[i]; // includes E_AXIS + set_destination_to_current(); feedrate = 0.0; @@ -1780,10 +1777,11 @@ inline void gcode_G28() { // A delta can only safely home all axis at the same time // all axis have to home at the same time - // Move all carriages up together until the first endstop is hit. + // Pretend the current position is 0,0,0 for (int i = X_AXIS; i <= Z_AXIS; i++) current_position[i] = 0; sync_plan_position(); + // Move all carriages up together until the first endstop is hit. for (int i = X_AXIS; i <= Z_AXIS; i++) destination[i] = 3 * Z_MAX_LENGTH; feedrate = 1.732 * homing_feedrate[X_AXIS]; line_to_destination(); @@ -1817,7 +1815,7 @@ inline void gcode_G28() { // Raise Z before homing any other axes if (home_all_axis || homeZ) { destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed - feedrate = max_feedrate[Z_AXIS]; + feedrate = max_feedrate[Z_AXIS] * 60; line_to_destination(); st_synchronize(); } @@ -1950,7 +1948,7 @@ inline void gcode_G28() { current_position[Z_AXIS] = 0; plan_set_position(cpx, cpy, 0, current_position[E_AXIS]); destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed - feedrate = max_feedrate[Z_AXIS]; + feedrate = max_feedrate[Z_AXIS] * 60; // max_feedrate is in mm/s. line_to_destination is feedrate/60. line_to_destination(); st_synchronize(); HOMEAXIS(Z); @@ -1994,14 +1992,12 @@ inline void gcode_G28() { enable_endstops(false); #endif - #if defined(MESH_BED_LEVELING) + // For manual leveling move back to 0,0 + #ifdef MESH_BED_LEVELING if (mbl_was_active) { current_position[X_AXIS] = mbl.get_x(0); current_position[Y_AXIS] = mbl.get_y(0); - destination[X_AXIS] = current_position[X_AXIS]; - destination[Y_AXIS] = current_position[Y_AXIS]; - destination[Z_AXIS] = current_position[Z_AXIS]; - destination[E_AXIS] = current_position[E_AXIS]; + set_destination_to_current(); feedrate = homing_feedrate[X_AXIS]; line_to_destination(); st_synchronize(); @@ -2013,25 +2009,14 @@ inline void gcode_G28() { feedrate = saved_feedrate; feedmultiply = saved_feedmultiply; - previous_millis_cmd = millis(); + refresh_cmd_timeout(); endstops_hit_on_purpose(); // clear endstop hit flags } -#if defined(MESH_BED_LEVELING) || defined(ENABLE_AUTO_BED_LEVELING) - - // Check for known positions in X and Y - inline bool can_run_bed_leveling() { - if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) return true; - LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM(MSG_POSITION_UNKNOWN); - return false; - } - -#endif // MESH_BED_LEVELING || ENABLE_AUTO_BED_LEVELING - #ifdef MESH_BED_LEVELING + enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet }; + /** * G29: Mesh-based Z-Probe, probes a grid and produces a * mesh to compensate for variable bed height @@ -2053,111 +2038,114 @@ inline void gcode_G28() { */ inline void gcode_G29() { - // Prevent leveling without first homing in X and Y - if (!can_run_bed_leveling()) return; - static int probe_point = -1; - int state = 0; - if (code_seen('S') || code_seen('s')) { - state = code_value_long(); - if (state < 0 || state > 3) { - SERIAL_PROTOCOLPGM("S out of range (0-3).\n"); - return; - } + MeshLevelingState state = code_seen('S') || code_seen('s') ? (MeshLevelingState)code_value_short() : MeshReport; + if (state < 0 || state > 3) { + SERIAL_PROTOCOLLNPGM("S out of range (0-3)."); + return; } - if (state == 0) { // Produce a mesh report - if (mbl.active) { - SERIAL_PROTOCOLPGM("Num X,Y: "); - SERIAL_PROTOCOL(MESH_NUM_X_POINTS); - SERIAL_PROTOCOLPGM(","); - SERIAL_PROTOCOL(MESH_NUM_Y_POINTS); - SERIAL_PROTOCOLPGM("\nZ search height: "); - SERIAL_PROTOCOL(MESH_HOME_SEARCH_Z); - SERIAL_PROTOCOLPGM("\nMeasured points:\n"); - for (int y=0; y= MESH_NUM_X_POINTS) { - SERIAL_PROTOCOLPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").\n"); + case MeshNext: + if (probe_point < 0) { + SERIAL_PROTOCOLLNPGM("Start mesh probing with \"G29 S1\" first."); return; } - } else { - SERIAL_PROTOCOLPGM("X not entered.\n"); - return; - } - if (code_seen('Y') || code_seen('y')) { - iy = code_value_long()-1; - if (iy < 0 || iy >= MESH_NUM_Y_POINTS) { - SERIAL_PROTOCOLPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").\n"); - return; + int ix, iy; + if (probe_point == 0) { + // Set Z to a positive value before recording the first Z. + current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; + sync_plan_position(); } - } else { - SERIAL_PROTOCOLPGM("Y not entered.\n"); - return; - } - if (code_seen('Z') || code_seen('z')) { - z = code_value(); - } else { + else { + // For others, save the Z of the previous point, then raise Z again. + ix = (probe_point - 1) % MESH_NUM_X_POINTS; + iy = (probe_point - 1) / MESH_NUM_X_POINTS; + if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag + mbl.set_z(ix, iy, current_position[Z_AXIS]); + current_position[Z_AXIS] = MESH_HOME_SEARCH_Z; + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder); + st_synchronize(); + } + // Is there another point to sample? Move there. + if (probe_point < MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS) { + ix = probe_point % MESH_NUM_X_POINTS; + iy = probe_point / MESH_NUM_X_POINTS; + if (iy & 1) ix = (MESH_NUM_X_POINTS - 1) - ix; // zig-zag + current_position[X_AXIS] = mbl.get_x(ix); + current_position[Y_AXIS] = mbl.get_y(iy); + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS]/60, active_extruder); + st_synchronize(); + probe_point++; + } + else { + // After recording the last point, activate the mbl and home + SERIAL_PROTOCOLLNPGM("Mesh probing done."); + probe_point = -1; + mbl.active = 1; + enquecommands_P(PSTR("G28")); + } + break; + + case MeshSet: + int ix, iy; + float z; + if (code_seen('X') || code_seen('x')) { + ix = code_value_long()-1; + if (ix < 0 || ix >= MESH_NUM_X_POINTS) { + SERIAL_PROTOCOLPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").\n"); + return; + } + } else { + SERIAL_PROTOCOLPGM("X not entered.\n"); + return; + } + if (code_seen('Y') || code_seen('y')) { + iy = code_value_long()-1; + if (iy < 0 || iy >= MESH_NUM_Y_POINTS) { + SERIAL_PROTOCOLPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").\n"); + return; + } + } else { + SERIAL_PROTOCOLPGM("Y not entered.\n"); + return; + } + if (code_seen('Z') || code_seen('z')) { + z = code_value(); + } else { SERIAL_PROTOCOLPGM("Z not entered.\n"); return; - } - mbl.z_values[iy][ix] = z; - } + } + mbl.z_values[iy][ix] = z; + + } // switch(state) } #elif defined(ENABLE_AUTO_BED_LEVELING) @@ -2202,21 +2190,22 @@ inline void gcode_G28() { */ inline void gcode_G29() { - // Prevent leveling without first homing in X and Y - if (!can_run_bed_leveling()) return; - - int verbose_level = 1; - - if (code_seen('V') || code_seen('v')) { - verbose_level = code_value_long(); - if (verbose_level < 0 || verbose_level > 4) { - SERIAL_PROTOCOLPGM("?(V)erbose Level is implausible (0-4).\n"); - return; - } + // Don't allow auto-leveling without homing first + if (!axis_known_position[X_AXIS] || !axis_known_position[Y_AXIS]) { + LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_POSITION_UNKNOWN); + return; } - bool dryrun = code_seen('D') || code_seen('d'); - bool engage_probe_for_each_reading = code_seen('E') || code_seen('e'); + int verbose_level = code_seen('V') || code_seen('v') ? code_value_short() : 1; + if (verbose_level < 0 || verbose_level > 4) { + SERIAL_ECHOLNPGM("?(V)erbose Level is implausible (0-4)."); + return; + } + + bool dryrun = code_seen('D') || code_seen('d'), + deploy_probe_for_each_reading = code_seen('E') || code_seen('e'); #ifdef AUTO_BED_LEVELING_GRID @@ -2226,24 +2215,24 @@ inline void gcode_G28() { if (verbose_level > 0) { SERIAL_PROTOCOLPGM("G29 Auto Bed Leveling\n"); - if (dryrun) SERIAL_ECHOLN("Running in DRY-RUN mode"); + if (dryrun) SERIAL_ECHOLNPGM("Running in DRY-RUN mode"); } int auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS; #ifndef DELTA - if (code_seen('P')) auto_bed_leveling_grid_points = code_value_long(); + if (code_seen('P')) auto_bed_leveling_grid_points = code_value_short(); if (auto_bed_leveling_grid_points < 2) { SERIAL_PROTOCOLPGM("?Number of probed (P)oints is implausible (2 minimum).\n"); return; } #endif - xy_travel_speed = code_seen('S') ? code_value_long() : XY_TRAVEL_SPEED; + xy_travel_speed = code_seen('S') ? code_value_short() : XY_TRAVEL_SPEED; - int left_probe_bed_position = code_seen('L') ? code_value_long() : LEFT_PROBE_BED_POSITION, - right_probe_bed_position = code_seen('R') ? code_value_long() : RIGHT_PROBE_BED_POSITION, - front_probe_bed_position = code_seen('F') ? code_value_long() : FRONT_PROBE_BED_POSITION, - back_probe_bed_position = code_seen('B') ? code_value_long() : BACK_PROBE_BED_POSITION; + int left_probe_bed_position = code_seen('L') ? code_value_short() : LEFT_PROBE_BED_POSITION, + right_probe_bed_position = code_seen('R') ? code_value_short() : RIGHT_PROBE_BED_POSITION, + front_probe_bed_position = code_seen('F') ? code_value_short() : FRONT_PROBE_BED_POSITION, + back_probe_bed_position = code_seen('B') ? code_value_short() : BACK_PROBE_BED_POSITION; bool left_out_l = left_probe_bed_position < MIN_PROBE_X, left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - MIN_PROBE_EDGE, @@ -2279,7 +2268,7 @@ inline void gcode_G28() { #ifdef Z_PROBE_SLED dock_sled(false); // engage (un-dock) the probe #elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING) - engage_z_probe(); + deploy_z_probe(); #endif st_synchronize(); @@ -2360,7 +2349,7 @@ inline void gcode_G28() { // raise extruder float measured_z, - z_before = Z_RAISE_BETWEEN_PROBINGS + (probePointCounter ? current_position[Z_AXIS] : 0); + z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING; #ifdef DELTA // Avoid probing the corners (outside the round or hexagon print surface) on a delta printer. @@ -2368,14 +2357,13 @@ inline void gcode_G28() { if (distance_from_center > DELTA_PROBABLE_RADIUS) continue; #endif //DELTA - // Enhanced G29 - Do not retract servo between probes ProbeAction act; - if (engage_probe_for_each_reading) - act = ProbeEngageAndRetract; - else if (yProbe == front_probe_bed_position && xCount == 0) - act = ProbeEngage; - else if (yProbe == front_probe_bed_position + (yGridSpacing * (auto_bed_leveling_grid_points - 1)) && xCount == auto_bed_leveling_grid_points - 1) - act = ProbeRetract; + if (deploy_probe_for_each_reading) // G29 E - Stow between probes + act = ProbeDeployAndStow; + else if (yCount == 0 && xCount == 0) + act = ProbeDeploy; + else if (yCount == auto_bed_leveling_grid_points - 1 && xCount == auto_bed_leveling_grid_points - 1) + act = ProbeStow; else act = ProbeStay; @@ -2447,7 +2435,7 @@ inline void gcode_G28() { if (diff >= 0.0) SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment else - SERIAL_PROTOCOLPGM(" "); + SERIAL_PROTOCOLCHAR(' '); SERIAL_PROTOCOL_F(diff, 5); } // xx SERIAL_EOL; @@ -2466,10 +2454,10 @@ inline void gcode_G28() { // Actions for each probe ProbeAction p1, p2, p3; - if (engage_probe_for_each_reading) - p1 = p2 = p3 = ProbeEngageAndRetract; + if (deploy_probe_for_each_reading) + p1 = p2 = p3 = ProbeDeployAndStow; else - p1 = ProbeEngage, p2 = ProbeStay, p3 = ProbeRetract; + p1 = ProbeDeploy, p2 = ProbeStay, p3 = ProbeStow; // Probe at 3 arbitrary points float z_at_pt_1 = probe_pt(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, Z_RAISE_BEFORE_PROBING, p1, verbose_level), @@ -2502,7 +2490,7 @@ inline void gcode_G28() { #ifdef Z_PROBE_SLED dock_sled(true, -SLED_DOCKING_OFFSET); // dock the probe, correcting for over-travel #elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING) - retract_z_probe(); + stow_z_probe(); #endif #ifdef Z_PROBE_END_SCRIPT @@ -2514,7 +2502,7 @@ inline void gcode_G28() { #ifndef Z_PROBE_SLED inline void gcode_G30() { - engage_z_probe(); // Engage Z Servo endstop if available + deploy_z_probe(); // Engage Z Servo endstop if available st_synchronize(); // TODO: make sure the bed_level_rotation_matrix is identity or the planner will get set incorectly setup_for_endstop_move(); @@ -2532,7 +2520,7 @@ inline void gcode_G28() { SERIAL_EOL; clean_up_after_endstop_move(); - retract_z_probe(); // Retract Z Servo endstop if available + stow_z_probe(); // Retract Z Servo endstop if available } #endif //!Z_PROBE_SLED @@ -2571,11 +2559,11 @@ inline void gcode_G92() { unsigned long codenum = 0; bool hasP = false, hasS = false; if (code_seen('P')) { - codenum = code_value(); // milliseconds to wait + codenum = code_value_short(); // milliseconds to wait hasP = codenum > 0; } if (code_seen('S')) { - codenum = code_value() * 1000; // seconds to wait + codenum = code_value_short() * 1000UL; // seconds to wait hasS = codenum > 0; } char* starpos = strchr(src, '*'); @@ -2592,7 +2580,7 @@ inline void gcode_G92() { lcd_ignore_click(); st_synchronize(); - previous_millis_cmd = millis(); + refresh_cmd_timeout(); if (codenum > 0) { codenum += previous_millis_cmd; // keep track of when we started waiting while(millis() < codenum && !lcd_clicked()) { @@ -2623,13 +2611,7 @@ inline void gcode_G92() { */ inline void gcode_M17() { LCD_MESSAGEPGM(MSG_NO_MOVE); - enable_x(); - enable_y(); - enable_z(); - enable_e0(); - enable_e1(); - enable_e2(); - enable_e3(); + enable_all_steppers(); } #ifdef SDSUPPORT @@ -2687,7 +2669,7 @@ inline void gcode_M17() { */ inline void gcode_M26() { if (card.cardOK && code_seen('S')) - card.setIndex(code_value_long()); + card.setIndex(code_value_short()); } /** @@ -2778,7 +2760,7 @@ inline void gcode_M31() { card.openFile(namestartpos, true, !call_procedure); if (code_seen('S') && strchr_pointer < namestartpos) // "S" (must occur _before_ the filename!) - card.setIndex(code_value_long()); + card.setIndex(code_value_short()); card.startFileprint(); if (!call_procedure) @@ -2806,11 +2788,11 @@ inline void gcode_M31() { */ inline void gcode_M42() { if (code_seen('S')) { - int pin_status = code_value(), + int pin_status = code_value_short(), pin_number = LED_PIN; if (code_seen('P') && pin_status >= 0 && pin_status <= 255) - pin_number = code_value(); + pin_number = code_value_short(); for (int8_t i = 0; i < (int8_t)(sizeof(sensitive_pins) / sizeof(*sensitive_pins)); i++) { if (sensitive_pins[i] == pin_number) { @@ -2819,7 +2801,7 @@ inline void gcode_M42() { } } - #if defined(FAN_PIN) && FAN_PIN > -1 + #if HAS_FAN if (pin_number == FAN_PIN) fanSpeed = pin_status; #endif @@ -2831,11 +2813,15 @@ inline void gcode_M42() { } // code_seen('S') } - #if defined(ENABLE_AUTO_BED_LEVELING) && defined(Z_PROBE_REPEATABILITY_TEST) - #if Z_MIN_PIN == -1 - #error "You must have a Z_MIN endstop in order to enable calculation of Z-Probe repeatability." + // This is redundant since the SanityCheck.h already checks for a valid Z_PROBE_PIN, but here for clarity. + #ifdef Z_PROBE_ENDSTOP + #if !HAS_Z_PROBE + #error You must define Z_PROBE_PIN to enable Z-Probe repeatability calculation. + #endif + #elif !HAS_Z_MIN + #error You must define Z_MIN_PIN to enable Z-Probe repeatability calculation. #endif /** @@ -2865,7 +2851,7 @@ inline void gcode_M42() { int verbose_level = 1, n_samples = 10, n_legs = 0; if (code_seen('V') || code_seen('v')) { - verbose_level = code_value(); + verbose_level = code_value_short(); if (verbose_level < 0 || verbose_level > 4 ) { SERIAL_PROTOCOLPGM("?Verbose Level not plausible (0-4).\n"); return; @@ -2876,7 +2862,7 @@ inline void gcode_M42() { SERIAL_PROTOCOLPGM("M48 Z-Probe Repeatability test\n"); if (code_seen('P') || code_seen('p') || code_seen('n')) { // `n` for legacy support only - please use `P`! - n_samples = code_value(); + n_samples = code_value_short(); if (n_samples < 4 || n_samples > 50) { SERIAL_PROTOCOLPGM("?Sample size not plausible (4-50).\n"); return; @@ -2890,7 +2876,7 @@ inline void gcode_M42() { Z_start_location = Z_current + Z_RAISE_BEFORE_PROBING, ext_position = st_get_position_mm(E_AXIS); - bool engage_probe_for_each_reading = code_seen('E') || code_seen('e'); + bool deploy_probe_for_each_reading = code_seen('E') || code_seen('e'); if (code_seen('X') || code_seen('x')) { X_probe_location = code_value() - X_PROBE_OFFSET_FROM_EXTRUDER; @@ -2909,7 +2895,7 @@ inline void gcode_M42() { } if (code_seen('L') || code_seen('l')) { - n_legs = code_value(); + n_legs = code_value_short(); if (n_legs == 1) n_legs = 2; if (n_legs < 0 || n_legs > 15) { SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n"); @@ -2953,7 +2939,7 @@ inline void gcode_M42() { // Then retrace the right amount and use that in subsequent probes // - engage_z_probe(); + deploy_z_probe(); setup_for_endstop_move(); run_z_probe(); @@ -2968,7 +2954,7 @@ inline void gcode_M42() { st_synchronize(); current_position[Z_AXIS] = Z_current = st_get_position_mm(Z_AXIS); - if (engage_probe_for_each_reading) retract_z_probe(); + if (deploy_probe_for_each_reading) stow_z_probe(); for (uint16_t n=0; n < n_samples; n++) { @@ -3010,8 +2996,8 @@ inline void gcode_M42() { } // n_legs - if (engage_probe_for_each_reading) { - engage_z_probe(); + if (deploy_probe_for_each_reading) { + deploy_z_probe(); delay(1000); } @@ -3057,14 +3043,14 @@ inline void gcode_M42() { plan_buffer_line(X_probe_location, Y_probe_location, Z_start_location, current_position[E_AXIS], homing_feedrate[Z_AXIS]/60, active_extruder); st_synchronize(); - if (engage_probe_for_each_reading) { - retract_z_probe(); + if (deploy_probe_for_each_reading) { + stow_z_probe(); delay(1000); } } - if (!engage_probe_for_each_reading) { - retract_z_probe(); + if (!deploy_probe_for_each_reading) { + stow_z_probe(); delay(1000); } @@ -3091,12 +3077,15 @@ inline void gcode_M42() { inline void gcode_M104() { if (setTargetedHotend(104)) return; - if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); - #ifdef DUAL_X_CARRIAGE - if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && tmp_extruder == 0) - setTargetHotend1(code_value() == 0.0 ? 0.0 : code_value() + duplicate_extruder_temp_offset); - #endif - setWatch(); + if (code_seen('S')) { + float temp = code_value(); + setTargetHotend(temp, target_extruder); + #ifdef DUAL_X_CARRIAGE + if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0) + setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset); + #endif + setWatch(); + } } /** @@ -3105,48 +3094,51 @@ inline void gcode_M104() { inline void gcode_M105() { if (setTargetedHotend(105)) return; - #if defined(TEMP_0_PIN) && TEMP_0_PIN > -1 - SERIAL_PROTOCOLPGM("ok T:"); - SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); - SERIAL_PROTOCOLPGM(" /"); - SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1); - #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 + #if HAS_TEMP_0 || HAS_TEMP_BED + SERIAL_PROTOCOLPGM("ok"); + #if HAS_TEMP_0 + SERIAL_PROTOCOLPGM(" T:"); + SERIAL_PROTOCOL_F(degHotend(target_extruder), 1); + SERIAL_PROTOCOLPGM(" /"); + SERIAL_PROTOCOL_F(degTargetHotend(target_extruder), 1); + #endif + #if HAS_TEMP_BED SERIAL_PROTOCOLPGM(" B:"); - SERIAL_PROTOCOL_F(degBed(),1); + SERIAL_PROTOCOL_F(degBed(), 1); SERIAL_PROTOCOLPGM(" /"); - SERIAL_PROTOCOL_F(degTargetBed(),1); - #endif //TEMP_BED_PIN - for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { + SERIAL_PROTOCOL_F(degTargetBed(), 1); + #endif + for (int8_t e = 0; e < EXTRUDERS; ++e) { SERIAL_PROTOCOLPGM(" T"); - SERIAL_PROTOCOL(cur_extruder); - SERIAL_PROTOCOLPGM(":"); - SERIAL_PROTOCOL_F(degHotend(cur_extruder),1); + SERIAL_PROTOCOL(e); + SERIAL_PROTOCOLCHAR(':'); + SERIAL_PROTOCOL_F(degHotend(e), 1); SERIAL_PROTOCOLPGM(" /"); - SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1); + SERIAL_PROTOCOL_F(degTargetHotend(e), 1); } - #else + #else // !HAS_TEMP_0 && !HAS_TEMP_BED SERIAL_ERROR_START; SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS); #endif SERIAL_PROTOCOLPGM(" @:"); #ifdef EXTRUDER_WATTS - SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(tmp_extruder))/127); - SERIAL_PROTOCOLPGM("W"); + SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(target_extruder))/127); + SERIAL_PROTOCOLCHAR('W'); #else - SERIAL_PROTOCOL(getHeaterPower(tmp_extruder)); + SERIAL_PROTOCOL(getHeaterPower(target_extruder)); #endif SERIAL_PROTOCOLPGM(" B@:"); #ifdef BED_WATTS SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1))/127); - SERIAL_PROTOCOLPGM("W"); + SERIAL_PROTOCOLCHAR('W'); #else SERIAL_PROTOCOL(getHeaterPower(-1)); #endif #ifdef SHOW_TEMP_ADC_VALUES - #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 + #if HAS_TEMP_BED SERIAL_PROTOCOLPGM(" ADC B:"); SERIAL_PROTOCOL_F(degBed(),1); SERIAL_PROTOCOLPGM("C->"); @@ -3155,29 +3147,29 @@ inline void gcode_M105() { for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { SERIAL_PROTOCOLPGM(" T"); SERIAL_PROTOCOL(cur_extruder); - SERIAL_PROTOCOLPGM(":"); + SERIAL_PROTOCOLCHAR(':'); SERIAL_PROTOCOL_F(degHotend(cur_extruder),1); SERIAL_PROTOCOLPGM("C->"); SERIAL_PROTOCOL_F(rawHotendTemp(cur_extruder)/OVERSAMPLENR,0); } #endif - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } -#if defined(FAN_PIN) && FAN_PIN > -1 +#if HAS_FAN /** * M106: Set Fan Speed */ - inline void gcode_M106() { fanSpeed = code_seen('S') ? constrain(code_value(), 0, 255) : 255; } + inline void gcode_M106() { fanSpeed = code_seen('S') ? constrain(code_value_short(), 0, 255) : 255; } /** * M107: Fan Off */ inline void gcode_M107() { fanSpeed = 0; } -#endif //FAN_PIN +#endif // HAS_FAN /** * M109: Wait for extruder(s) to reach temperature @@ -3189,10 +3181,11 @@ inline void gcode_M109() { CooldownNoWait = code_seen('S'); if (CooldownNoWait || code_seen('R')) { - setTargetHotend(code_value(), tmp_extruder); + float temp = code_value(); + setTargetHotend(temp, target_extruder); #ifdef DUAL_X_CARRIAGE - if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && tmp_extruder == 0) - setTargetHotend1(code_value() == 0.0 ? 0.0 : code_value() + duplicate_extruder_temp_offset); + if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0) + setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset); #endif } @@ -3208,7 +3201,7 @@ inline void gcode_M109() { unsigned long timetemp = millis(); /* See if we are heating up or cooling down */ - target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling + target_direction = isHeatingHotend(target_extruder); // true if heating, false if cooling cancel_heatup = false; @@ -3219,15 +3212,15 @@ inline void gcode_M109() { while((!cancel_heatup)&&((residencyStart == -1) || (residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL)))) ) #else - while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) + while ( target_direction ? (isHeatingHotend(target_extruder)) : (isCoolingHotend(target_extruder)&&(CooldownNoWait==false)) ) #endif //TEMP_RESIDENCY_TIME { // while loop if (millis() > timetemp + 1000UL) { //Print temp & remaining time every 1s while waiting SERIAL_PROTOCOLPGM("T:"); - SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); + SERIAL_PROTOCOL_F(degHotend(target_extruder),1); SERIAL_PROTOCOLPGM(" E:"); - SERIAL_PROTOCOL((int)tmp_extruder); + SERIAL_PROTOCOL((int)target_extruder); #ifdef TEMP_RESIDENCY_TIME SERIAL_PROTOCOLPGM(" W:"); if (residencyStart > -1) { @@ -3235,10 +3228,10 @@ inline void gcode_M109() { SERIAL_PROTOCOLLN( timetemp ); } else { - SERIAL_PROTOCOLLN( "?" ); + SERIAL_PROTOCOLLNPGM("?"); } #else - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; #endif timetemp = millis(); } @@ -3248,9 +3241,9 @@ inline void gcode_M109() { #ifdef TEMP_RESIDENCY_TIME // start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time // or when current temp falls outside the hysteresis after target temp was reached - if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) || - (residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) || - (residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) ) + if ((residencyStart == -1 && target_direction && (degHotend(target_extruder) >= (degTargetHotend(target_extruder)-TEMP_WINDOW))) || + (residencyStart == -1 && !target_direction && (degHotend(target_extruder) <= (degTargetHotend(target_extruder)+TEMP_WINDOW))) || + (residencyStart > -1 && labs(degHotend(target_extruder) - degTargetHotend(target_extruder)) > TEMP_HYSTERESIS) ) { residencyStart = millis(); } @@ -3258,10 +3251,11 @@ inline void gcode_M109() { } LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); - starttime = previous_millis_cmd = millis(); + refresh_cmd_timeout(); + starttime = previous_millis_cmd; } -#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 +#if HAS_TEMP_BED /** * M190: Sxxx Wait for bed current temp to reach target temp. Waits only when heating @@ -3289,17 +3283,17 @@ inline void gcode_M109() { SERIAL_PROTOCOL((int)active_extruder); SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOL_F(degBed(), 1); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } manage_heater(); manage_inactivity(); lcd_update(); } LCD_MESSAGEPGM(MSG_BED_DONE); - previous_millis_cmd = millis(); + refresh_cmd_timeout(); } -#endif // TEMP_BED_PIN > -1 +#endif // HAS_TEMP_BED /** * M112: Emergency Stop @@ -3310,7 +3304,7 @@ inline void gcode_M112() { #ifdef BARICUDA - #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1 + #if HAS_HEATER_1 /** * M126: Heater 1 valve open */ @@ -3321,7 +3315,7 @@ inline void gcode_M112() { inline void gcode_M127() { ValvePressure = 0; } #endif - #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1 + #if HAS_HEATER_2 /** * M128: Heater 2 valve open */ @@ -3352,7 +3346,7 @@ inline void gcode_M140() { // If you have a switch on suicide pin, this is useful // if you want to start another print with suicide feature after // a print without suicide... - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, HIGH); #endif @@ -3380,7 +3374,7 @@ inline void gcode_M81() { finishAndDisableSteppers(); fanSpeed = 0; delay(1000); // Wait 1 second before switching off - #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 + #if HAS_SUICIDE st_synchronize(); suicide(); #elif HAS_POWER_SWITCH @@ -3490,27 +3484,26 @@ inline void gcode_M114() { SERIAL_PROTOCOLPGM(" Z:"); SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; #ifdef SCARA SERIAL_PROTOCOLPGM("SCARA Theta:"); SERIAL_PROTOCOL(delta[X_AXIS]); SERIAL_PROTOCOLPGM(" Psi+Theta:"); SERIAL_PROTOCOL(delta[Y_AXIS]); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; SERIAL_PROTOCOLPGM("SCARA Cal - Theta:"); SERIAL_PROTOCOL(delta[X_AXIS]+home_offset[X_AXIS]); SERIAL_PROTOCOLPGM(" Psi+Theta (90):"); SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+home_offset[Y_AXIS]); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:"); SERIAL_PROTOCOL(delta[X_AXIS]/90*axis_steps_per_unit[X_AXIS]); SERIAL_PROTOCOLPGM(" Psi+Theta:"); SERIAL_PROTOCOL((delta[Y_AXIS]-delta[X_AXIS])/90*axis_steps_per_unit[Y_AXIS]); - SERIAL_PROTOCOLLN(""); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; SERIAL_EOL; #endif } @@ -3536,35 +3529,38 @@ inline void gcode_M117() { */ inline void gcode_M119() { SERIAL_PROTOCOLLN(MSG_M119_REPORT); - #if defined(X_MIN_PIN) && X_MIN_PIN > -1 + #if HAS_X_MIN SERIAL_PROTOCOLPGM(MSG_X_MIN); SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(X_MAX_PIN) && X_MAX_PIN > -1 + #if HAS_X_MAX SERIAL_PROTOCOLPGM(MSG_X_MAX); SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1 + #if HAS_Y_MIN SERIAL_PROTOCOLPGM(MSG_Y_MIN); SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1 + #if HAS_Y_MAX SERIAL_PROTOCOLPGM(MSG_Y_MAX); SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1 + #if HAS_Z_MIN SERIAL_PROTOCOLPGM(MSG_Z_MIN); SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1 + #if HAS_Z_MAX SERIAL_PROTOCOLPGM(MSG_Z_MAX); SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - #if defined(Z2_MAX_PIN) && Z2_MAX_PIN > -1 + #if HAS_Z2_MAX SERIAL_PROTOCOLPGM(MSG_Z2_MAX); SERIAL_PROTOCOLLN(((READ(Z2_MAX_PIN)^Z2_MAX_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); #endif - + #if HAS_Z_PROBE + SERIAL_PROTOCOLPGM(MSG_Z_PROBE); + SERIAL_PROTOCOLLN(((READ(Z_PROBE_PIN)^Z_PROBE_ENDSTOP_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); + #endif } /** @@ -3584,9 +3580,9 @@ inline void gcode_M121() { enable_endstops(true); } */ inline void gcode_M150() { SendColors( - code_seen('R') ? (byte)code_value() : 0, - code_seen('U') ? (byte)code_value() : 0, - code_seen('B') ? (byte)code_value() : 0 + code_seen('R') ? (byte)code_value_short() : 0, + code_seen('U') ? (byte)code_value_short() : 0, + code_seen('B') ? (byte)code_value_short() : 0 ); } @@ -3598,9 +3594,9 @@ inline void gcode_M121() { enable_endstops(true); } * D */ inline void gcode_M200() { - tmp_extruder = active_extruder; + int tmp_extruder = active_extruder; if (code_seen('T')) { - tmp_extruder = code_value(); + tmp_extruder = code_value_short(); if (tmp_extruder >= EXTRUDERS) { SERIAL_ECHO_START; SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER); @@ -3671,27 +3667,23 @@ inline void gcode_M203() { * Also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate */ inline void gcode_M204() { - if (code_seen('S')) // Kept for legacy compatibility. Should NOT BE USED for new developments. - { + if (code_seen('S')) { // Kept for legacy compatibility. Should NOT BE USED for new developments. acceleration = code_value(); travel_acceleration = acceleration; - SERIAL_ECHOPAIR("Setting Printing and Travelling Acceleration: ", acceleration ); + SERIAL_ECHOPAIR("Setting Print and Travel Acceleration: ", acceleration ); SERIAL_EOL; } - if (code_seen('P')) - { + if (code_seen('P')) { acceleration = code_value(); - SERIAL_ECHOPAIR("Setting Printing Acceleration: ", acceleration ); + SERIAL_ECHOPAIR("Setting Print Acceleration: ", acceleration ); SERIAL_EOL; } - if (code_seen('R')) - { + if (code_seen('R')) { retract_acceleration = code_value(); SERIAL_ECHOPAIR("Setting Retract Acceleration: ", retract_acceleration ); SERIAL_EOL; } - if (code_seen('T')) - { + if (code_seen('T')) { travel_acceleration = code_value(); SERIAL_ECHOPAIR("Setting Travel Acceleration: ", travel_acceleration ); SERIAL_EOL; @@ -3794,7 +3786,7 @@ inline void gcode_M206() { */ inline void gcode_M209() { if (code_seen('S')) { - int t = code_value(); + int t = code_value_short(); switch(t) { case 0: autoretract_enabled = false; @@ -3823,23 +3815,23 @@ inline void gcode_M206() { inline void gcode_M218() { if (setTargetedHotend(218)) return; - if (code_seen('X')) extruder_offset[X_AXIS][tmp_extruder] = code_value(); - if (code_seen('Y')) extruder_offset[Y_AXIS][tmp_extruder] = code_value(); + if (code_seen('X')) extruder_offset[X_AXIS][target_extruder] = code_value(); + if (code_seen('Y')) extruder_offset[Y_AXIS][target_extruder] = code_value(); #ifdef DUAL_X_CARRIAGE - if (code_seen('Z')) extruder_offset[Z_AXIS][tmp_extruder] = code_value(); + if (code_seen('Z')) extruder_offset[Z_AXIS][target_extruder] = code_value(); #endif SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); - for (tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++) { - SERIAL_ECHO(" "); - SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]); - SERIAL_ECHO(","); - SERIAL_ECHO(extruder_offset[Y_AXIS][tmp_extruder]); + for (int e = 0; e < EXTRUDERS; e++) { + SERIAL_CHAR(' '); + SERIAL_ECHO(extruder_offset[X_AXIS][e]); + SERIAL_CHAR(','); + SERIAL_ECHO(extruder_offset[Y_AXIS][e]); #ifdef DUAL_X_CARRIAGE - SERIAL_ECHO(","); - SERIAL_ECHO(extruder_offset[Z_AXIS][tmp_extruder]); + SERIAL_CHAR(','); + SERIAL_ECHO(extruder_offset[Z_AXIS][e]); #endif } SERIAL_EOL; @@ -3862,7 +3854,7 @@ inline void gcode_M221() { int sval = code_value(); if (code_seen('T')) { if (setTargetedHotend(221)) return; - extruder_multiply[tmp_extruder] = sval; + extruder_multiply[target_extruder] = sval; } else { extruder_multiply[active_extruder] = sval; @@ -3953,7 +3945,7 @@ inline void gcode_M226() { SERIAL_PROTOCOL(servo_index); SERIAL_PROTOCOL(": "); SERIAL_PROTOCOL(servos[servo_index].read()); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } } @@ -4021,7 +4013,7 @@ inline void gcode_M226() { //Kc does not have scaling applied above, or in resetting defaults SERIAL_PROTOCOL(PID_PARAM(Kc, e)); #endif - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } else { SERIAL_ECHO_START; @@ -4046,12 +4038,12 @@ inline void gcode_M226() { SERIAL_PROTOCOL(unscalePID_i(bedKi)); SERIAL_PROTOCOL(" d:"); SERIAL_PROTOCOL(unscalePID_d(bedKd)); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } #endif // PIDTEMPBED -#if defined(CHDK) || (defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1) +#if defined(CHDK) || HAS_PHOTOGRAPH /** * M240: Trigger a camera by emulating a Canon RC-1 @@ -4064,7 +4056,7 @@ inline void gcode_M226() { chdkHigh = millis(); chdkActive = true; - #elif defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1 + #elif HAS_PHOTOGRAPH const uint8_t NUM_PULSES = 16; const float PULSE_LENGTH = 0.01524; @@ -4082,7 +4074,7 @@ inline void gcode_M226() { _delay_ms(PULSE_LENGTH); } - #endif // !CHDK && PHOTOGRAPH_PIN > -1 + #endif // !CHDK && HAS_PHOTOGRAPH } #endif // CHDK || PHOTOGRAPH_PIN @@ -4093,10 +4085,10 @@ inline void gcode_M226() { * M250: Read and optionally set the LCD contrast */ inline void gcode_M250() { - if (code_seen('C')) lcd_setcontrast(code_value_long() & 0x3F); + if (code_seen('C')) lcd_setcontrast(code_value_short() & 0x3F); SERIAL_PROTOCOLPGM("lcd contrast value: "); SERIAL_PROTOCOL(lcd_contrast); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } #endif // DOGLCD @@ -4119,8 +4111,8 @@ inline void gcode_M226() { * C */ inline void gcode_M303() { - int e = code_seen('E') ? code_value_long() : 0; - int c = code_seen('C') ? code_value_long() : 5; + int e = code_seen('E') ? code_value_short() : 0; + int c = code_seen('C') ? code_value_short() : 5; float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0); PID_autotune(temp, e, c); } @@ -4203,17 +4195,17 @@ inline void gcode_M303() { case 0: OUT_WRITE(SOL0_PIN, HIGH); break; - #if defined(SOL1_PIN) && SOL1_PIN > -1 + #if HAS_SOLENOID_1 case 1: OUT_WRITE(SOL1_PIN, HIGH); break; #endif - #if defined(SOL2_PIN) && SOL2_PIN > -1 + #if HAS_SOLENOID_2 case 2: OUT_WRITE(SOL2_PIN, HIGH); break; #endif - #if defined(SOL3_PIN) && SOL3_PIN > -1 + #if HAS_SOLENOID_3 case 3: OUT_WRITE(SOL3_PIN, HIGH); break; @@ -4256,11 +4248,11 @@ inline void gcode_M400() { st_synchronize(); } /** * M401: Engage Z Servo endstop if available */ - inline void gcode_M401() { engage_z_probe(); } + inline void gcode_M401() { deploy_z_probe(); } /** * M402: Retract Z Servo endstop if enabled */ - inline void gcode_M402() { retract_z_probe(); } + inline void gcode_M402() { stow_z_probe(); } #endif @@ -4270,7 +4262,7 @@ inline void gcode_M400() { st_synchronize(); } * M404: Display or set the nominal filament width (3mm, 1.75mm ) W<3.0> */ inline void gcode_M404() { - #if FILWIDTH_PIN > -1 + #if HAS_FILWIDTH if (code_seen('W')) { filament_width_nominal = code_value(); } @@ -4369,7 +4361,7 @@ inline void gcode_M503() { zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp SERIAL_ECHO_START; SERIAL_ECHOLNPGM(MSG_ZPROBE_ZOFFSET " " MSG_OK); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } else { SERIAL_ECHO_START; @@ -4378,14 +4370,14 @@ inline void gcode_M503() { SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN); SERIAL_ECHOPGM(MSG_Z_MAX); SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } } else { SERIAL_ECHO_START; SERIAL_ECHOLNPGM(MSG_ZPROBE_ZOFFSET " : "); SERIAL_ECHO(-zprobe_zoffset); - SERIAL_PROTOCOLLN(""); + SERIAL_EOL; } } @@ -4529,13 +4521,13 @@ inline void gcode_M503() { if (code_seen('R')) duplicate_extruder_temp_offset = code_value(); SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); - SERIAL_ECHO(" "); + SERIAL_CHAR(' '); SERIAL_ECHO(extruder_offset[X_AXIS][0]); - SERIAL_ECHO(","); + SERIAL_CHAR(','); SERIAL_ECHO(extruder_offset[Y_AXIS][0]); - SERIAL_ECHO(" "); + SERIAL_CHAR(' '); SERIAL_ECHO(duplicate_extruder_x_offset); - SERIAL_ECHO(","); + SERIAL_CHAR(','); SERIAL_ECHOLN(extruder_offset[Y_AXIS][1]); break; case DXC_FULL_CONTROL_MODE: @@ -4593,23 +4585,22 @@ inline void gcode_M907() { #endif // HAS_DIGIPOTSS -// M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. -inline void gcode_M350() { - #if defined(X_MS1_PIN) && X_MS1_PIN > -1 +#if HAS_MICROSTEPS + + // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. + inline void gcode_M350() { if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value()); for(int i=0;i -1 - if (code_seen('S')) switch(code_value_long()) { + /** + * M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B + * S# determines MS1 or MS2, X# sets the pin high/low. + */ + inline void gcode_M351() { + if (code_seen('S')) switch(code_value_short()) { case 1: for(int i=0;i= EXTRUDERS) { SERIAL_ECHO_START; - SERIAL_ECHO("T"); + SERIAL_CHAR('T'); SERIAL_ECHO(tmp_extruder); SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); } else { + target_extruder = tmp_extruder; + #if EXTRUDERS > 1 bool make_move = false; #endif + if (code_seen('F')) { + #if EXTRUDERS > 1 make_move = true; #endif + next_feedrate = code_value(); if (next_feedrate > 0.0) feedrate = next_feedrate; } #if EXTRUDERS > 1 if (tmp_extruder != active_extruder) { // Save current position to return to after applying extruder offset - memcpy(destination, current_position, sizeof(destination)); + set_destination_to_current(); #ifdef DUAL_X_CARRIAGE if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE && Stopped == false && (delayed_move_time != 0 || current_position[X_AXIS] != x_home_pos(active_extruder))) { @@ -4733,11 +4730,12 @@ inline void gcode_T() { /** * Process Commands and dispatch them to handlers + * This is called from the main loop() */ void process_commands() { if (code_seen('G')) { - int gCode = code_value_long(); + int gCode = code_value_short(); switch(gCode) { @@ -4812,7 +4810,7 @@ void process_commands() { } else if (code_seen('M')) { - switch( code_value_long() ) { + switch(code_value_short()) { #ifdef ULTIPANEL case 0: // M0 - Unconditional stop - Wait for user button press on LCD case 1: // M1 - Conditional stop - Wait for user button press on LCD @@ -4890,42 +4888,42 @@ void process_commands() { gcode_M109(); break; - #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 + #if HAS_TEMP_BED case 190: // M190 - Wait for bed heater to reach target. gcode_M190(); break; - #endif //TEMP_BED_PIN + #endif // HAS_TEMP_BED - #if defined(FAN_PIN) && FAN_PIN > -1 + #if HAS_FAN case 106: //M106 Fan On gcode_M106(); break; case 107: //M107 Fan Off gcode_M107(); break; - #endif //FAN_PIN + #endif // HAS_FAN #ifdef BARICUDA // PWM for HEATER_1_PIN - #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1 + #if HAS_HEATER_1 case 126: // M126 valve open gcode_M126(); break; case 127: // M127 valve closed gcode_M127(); break; - #endif //HEATER_1_PIN + #endif // HAS_HEATER_1 // PWM for HEATER_2_PIN - #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1 + #if HAS_HEATER_2 case 128: // M128 valve open gcode_M128(); break; case 129: // M129 valve closed gcode_M129(); break; - #endif //HEATER_2_PIN - #endif //BARICUDA + #endif // HAS_HEATER_2 + #endif // BARICUDA #if HAS_POWER_SWITCH @@ -5073,7 +5071,7 @@ void process_commands() { break; #endif // PIDTEMPBED - #if defined(CHDK) || (defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1) + #if defined(CHDK) || HAS_PHOTOGRAPH case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/ gcode_M240(); break; @@ -5191,13 +5189,17 @@ void process_commands() { break; #endif // HAS_DIGIPOTSS - case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. - gcode_M350(); - break; + #if HAS_MICROSTEPS - case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low. - gcode_M351(); - break; + case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. + gcode_M350(); + break; + + case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low. + gcode_M351(); + break; + + #endif // HAS_MICROSTEPS case 999: // M999: Restart after being Stopped gcode_M999(); @@ -5219,8 +5221,7 @@ void process_commands() { ClearToSend(); } -void FlushSerialRequestResend() -{ +void FlushSerialRequestResend() { //char cmdbuffer[bufindr][100]="Resend:"; MYSERIAL.flush(); SERIAL_PROTOCOLPGM(MSG_RESEND); @@ -5228,13 +5229,11 @@ void FlushSerialRequestResend() ClearToSend(); } -void ClearToSend() -{ - previous_millis_cmd = millis(); +void ClearToSend() { + refresh_cmd_timeout(); #ifdef SDSUPPORT - if(fromsd[bufindr]) - return; - #endif //SDSUPPORT + if (fromsd[bufindr]) return; + #endif SERIAL_PROTOCOLLNPGM(MSG_OK); } @@ -5251,29 +5250,18 @@ void get_coordinates() { } } -void get_arc_coordinates() -{ -#ifdef SF_ARC_FIX - bool relative_mode_backup = relative_mode; - relative_mode = true; -#endif - get_coordinates(); -#ifdef SF_ARC_FIX - relative_mode=relative_mode_backup; -#endif +void get_arc_coordinates() { + #ifdef SF_ARC_FIX + bool relative_mode_backup = relative_mode; + relative_mode = true; + #endif + get_coordinates(); + #ifdef SF_ARC_FIX + relative_mode = relative_mode_backup; + #endif - if(code_seen('I')) { - offset[0] = code_value(); - } - else { - offset[0] = 0.0; - } - if(code_seen('J')) { - offset[1] = code_value(); - } - else { - offset[1] = 0.0; - } + offset[0] = code_seen('I') ? code_value() : 0; + offset[1] = code_seen('J') ? code_value() : 0; } void clamp_to_software_endstops(float target[3]) @@ -5337,7 +5325,6 @@ void clamp_to_software_endstops(float target[3]) #ifdef ENABLE_AUTO_BED_LEVELING // Adjust print surface height by linear interpolation over the bed_level array. - int delta_grid_spacing[2] = { 0, 0 }; void adjust_delta(float cartesian[3]) { if (delta_grid_spacing[0] == 0 || delta_grid_spacing[1] == 0) return; // G29 not done! @@ -5377,16 +5364,9 @@ void clamp_to_software_endstops(float target[3]) } #endif // ENABLE_AUTO_BED_LEVELING - void prepare_move_raw() { - previous_millis_cmd = millis(); - calculate_delta(destination); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); - for (int i = 0; i < NUM_AXIS; i++) current_position[i] = destination[i]; - } - #endif // DELTA -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #if !defined(MIN) #define MIN(_v1, _v2) (((_v1) < (_v2)) ? (_v1) : (_v2)) @@ -5397,9 +5377,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ { if (!mbl.active) { plan_buffer_line(x, y, z, e, feed_rate, extruder); - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; - } + set_current_to_destination(); return; } int pix = mbl.select_x_index(current_position[X_AXIS]); @@ -5413,9 +5391,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ if (pix == ix && piy == iy) { // Start and end on same mesh square plan_buffer_line(x, y, z, e, feed_rate, extruder); - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; - } + set_current_to_destination(); return; } float nx, ny, ne, normalized_dist; @@ -5446,9 +5422,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ } else { // Already split on a border plan_buffer_line(x, y, z, e, feed_rate, extruder); - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; - } + set_current_to_destination(); return; } // Do the split and look for more borders @@ -5465,7 +5439,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ void prepare_move() { clamp_to_software_endstops(destination); - previous_millis_cmd = millis(); + refresh_cmd_timeout(); #ifdef SCARA //for now same as delta-code @@ -5536,64 +5510,58 @@ void prepare_move() { #endif // DELTA -#ifdef DUAL_X_CARRIAGE - if (active_extruder_parked) - { - if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && active_extruder == 0) - { - // move duplicate extruder into correct duplication position. - plan_set_position(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); - plan_buffer_line(current_position[X_AXIS] + duplicate_extruder_x_offset, current_position[Y_AXIS], current_position[Z_AXIS], - current_position[E_AXIS], max_feedrate[X_AXIS], 1); - sync_plan_position(); - st_synchronize(); - extruder_duplication_enabled = true; - active_extruder_parked = false; - } - else if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE) // handle unparking of head - { - if (current_position[E_AXIS] == destination[E_AXIS]) - { - // this is a travel move - skit it but keep track of current position (so that it can later - // be used as start of first non-travel move) - if (delayed_move_time != 0xFFFFFFFFUL) - { - memcpy(current_position, destination, sizeof(current_position)); - if (destination[Z_AXIS] > raised_parked_position[Z_AXIS]) - raised_parked_position[Z_AXIS] = destination[Z_AXIS]; - delayed_move_time = millis(); - return; - } + #ifdef DUAL_X_CARRIAGE + if (active_extruder_parked) { + if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && active_extruder == 0) { + // move duplicate extruder into correct duplication position. + plan_set_position(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + plan_buffer_line(current_position[X_AXIS] + duplicate_extruder_x_offset, current_position[Y_AXIS], current_position[Z_AXIS], + current_position[E_AXIS], max_feedrate[X_AXIS], 1); + sync_plan_position(); + st_synchronize(); + extruder_duplication_enabled = true; + active_extruder_parked = false; + } + else if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE) { // handle unparking of head + if (current_position[E_AXIS] == destination[E_AXIS]) { + // this is a travel move - skit it but keep track of current position (so that it can later + // be used as start of first non-travel move) + if (delayed_move_time != 0xFFFFFFFFUL) { + set_current_to_destination(); + if (destination[Z_AXIS] > raised_parked_position[Z_AXIS]) + raised_parked_position[Z_AXIS] = destination[Z_AXIS]; + delayed_move_time = millis(); + return; + } + } + delayed_move_time = 0; + // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower + plan_buffer_line(raised_parked_position[X_AXIS], raised_parked_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], raised_parked_position[Z_AXIS], + current_position[E_AXIS], min(max_feedrate[X_AXIS],max_feedrate[Y_AXIS]), active_extruder); + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], + current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); + active_extruder_parked = false; } - delayed_move_time = 0; - // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower - plan_buffer_line(raised_parked_position[X_AXIS], raised_parked_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], raised_parked_position[Z_AXIS], - current_position[E_AXIS], min(max_feedrate[X_AXIS],max_feedrate[Y_AXIS]), active_extruder); - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], - current_position[E_AXIS], max_feedrate[Z_AXIS], active_extruder); - active_extruder_parked = false; } - } -#endif //DUAL_X_CARRIAGE + #endif // DUAL_X_CARRIAGE -#if !defined(DELTA) && !defined(SCARA) - // Do not use feedmultiply for E or Z only moves - if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { - line_to_destination(); - } else { -#if defined(MESH_BED_LEVELING) - mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); - return; -#else - plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); -#endif // MESH_BED_LEVELING - } -#endif // !(DELTA || SCARA) + #if !defined(DELTA) && !defined(SCARA) + // Do not use feedmultiply for E or Z only moves + if ( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { + line_to_destination(); + } + else { + #ifdef MESH_BED_LEVELING + mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); + return; + #else + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); + #endif // MESH_BED_LEVELING + } + #endif // !(DELTA || SCARA) - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; - } + set_current_to_destination(); } void prepare_arc_move(char isclockwise) { @@ -5605,19 +5573,11 @@ void prepare_arc_move(char isclockwise) { // As far as the parser is concerned, the position is now == target. In reality the // motion control system might still be processing the action and the real tool position // in any intermediate location. - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; - } - previous_millis_cmd = millis(); + set_current_to_destination(); + refresh_cmd_timeout(); } -#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1 - -#if defined(FAN_PIN) - #if CONTROLLERFAN_PIN == FAN_PIN - #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN" - #endif -#endif +#if HAS_CONTROLLERFAN unsigned long lastMotor = 0; // Last time a motor was turned on unsigned long lastMotorCheck = 0; // Last time the state was checked @@ -5630,7 +5590,7 @@ void controllerFan() { || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled... #if EXTRUDERS > 1 || E1_ENABLE_READ == E_ENABLE_ON - #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1 + #if HAS_X2_ENABLE || X2_ENABLE_READ == X_ENABLE_ON #endif #if EXTRUDERS > 2 @@ -5742,7 +5702,7 @@ void handle_status_leds(void) { max_temp = max(max_temp, degHotend(cur_extruder)); max_temp = max(max_temp, degTargetHotend(cur_extruder)); } - #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 + #if HAS_TEMP_BED max_temp = max(max_temp, degTargetBed()); max_temp = max(max_temp, degBed()); #endif @@ -5762,134 +5722,175 @@ void handle_status_leds(void) { } #endif -void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument set in Marlin.h -{ - -#if defined(KILL_PIN) && KILL_PIN > -1 - static int killCount = 0; // make the inactivity button a bit less responsive - const int KILL_DELAY = 750; -#endif +void enable_all_steppers() { + enable_x(); + enable_y(); + enable_z(); + enable_e0(); + enable_e1(); + enable_e2(); + enable_e3(); +} -#if defined(FILRUNOUT_PIN) && FILRUNOUT_PIN > -1 - if(card.sdprinting) { - if(!(READ(FILRUNOUT_PIN))^FIL_RUNOUT_INVERTING) - filrunout(); } -#endif +void disable_all_steppers() { + disable_x(); + disable_y(); + disable_z(); + disable_e0(); + disable_e1(); + disable_e2(); + disable_e3(); +} -#if defined(HOME_PIN) && HOME_PIN > -1 - static int homeDebounceCount = 0; // poor man's debouncing count - const int HOME_DEBOUNCE_DELAY = 750; -#endif - +/** + * Manage several activities: + * - Check for Filament Runout + * - Keep the command buffer full + * - Check for maximum inactive time between commands + * - Check for maximum inactive time between stepper commands + * - Check if pin CHDK needs to go LOW + * - Check for KILL button held down + * - Check for HOME button held down + * - Check if cooling fan needs to be switched on + * - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT) + */ +void manage_inactivity(bool ignore_stepper_queue/*=false*/) { - if(buflen < (BUFSIZE-1)) - get_command(); + #if HAS_FILRUNOUT + if (card.sdprinting && !(READ(FILRUNOUT_PIN) ^ FIL_RUNOUT_INVERTING)) + filrunout(); + #endif - if( (millis() - previous_millis_cmd) > max_inactive_time ) - if(max_inactive_time) - kill(); - if(stepper_inactive_time) { - if( (millis() - previous_millis_cmd) > stepper_inactive_time ) - { - if(blocks_queued() == false && ignore_stepper_queue == false) { - disable_x(); - disable_y(); - disable_z(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); - } - } - } - - #ifdef CHDK //Check if pin should be set to LOW after M240 set it to HIGH - if (chdkActive && (millis() - chdkHigh > CHDK_DELAY)) - { + if (buflen < BUFSIZE - 1) get_command(); + + unsigned long ms = millis(); + + if (max_inactive_time && ms > previous_millis_cmd + max_inactive_time) kill(); + + if (stepper_inactive_time && ms > previous_millis_cmd + stepper_inactive_time + && !ignore_stepper_queue && !blocks_queued()) + disable_all_steppers(); + + #ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH + if (chdkActive && ms > chdkHigh + CHDK_DELAY) { chdkActive = false; WRITE(CHDK, LOW); } #endif - - #if defined(KILL_PIN) && KILL_PIN > -1 + + #if HAS_KILL // Check if the kill button was pressed and wait just in case it was an accidental // key kill key press // ------------------------------------------------------------------------------- - if( 0 == READ(KILL_PIN) ) - { + static int killCount = 0; // make the inactivity button a bit less responsive + const int KILL_DELAY = 750; + if (!READ(KILL_PIN)) killCount++; - } else if (killCount > 0) - { killCount--; - } + // Exceeded threshold and we can confirm that it was not accidental // KILL the machine // ---------------------------------------------------------------- - if ( killCount >= KILL_DELAY) - { - kill(); + if (killCount >= KILL_DELAY) kill(); + #endif + + #if HAS_HOME + // Check to see if we have to home, use poor man's debouncer + // --------------------------------------------------------- + static int homeDebounceCount = 0; // poor man's debouncing count + const int HOME_DEBOUNCE_DELAY = 750; + if (!READ(HOME_PIN)) { + if (!homeDebounceCount) { + enquecommands_P(PSTR("G28")); + LCD_ALERTMESSAGEPGM(MSG_AUTO_HOME); + } + if (homeDebounceCount < HOME_DEBOUNCE_DELAY) + homeDebounceCount++; + else + homeDebounceCount = 0; + } + #endif + + #if HAS_CONTROLLERFAN + controllerFan(); // Check if fan should be turned on to cool stepper drivers down + #endif + + #ifdef EXTRUDER_RUNOUT_PREVENT + if (ms > previous_millis_cmd + EXTRUDER_RUNOUT_SECONDS * 1000) + if (degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP) { + bool oldstatus; + switch(active_extruder) { + case 0: + oldstatus = E0_ENABLE_READ; + enable_e0(); + break; + #if EXTRUDERS > 1 + case 1: + oldstatus = E1_ENABLE_READ; + enable_e1(); + break; + #if EXTRUDERS > 2 + case 2: + oldstatus = E2_ENABLE_READ; + enable_e2(); + break; + #if EXTRUDERS > 3 + case 3: + oldstatus = E3_ENABLE_READ; + enable_e3(); + break; + #endif + #endif + #endif + } + float oldepos = current_position[E_AXIS], oldedes = destination[E_AXIS]; + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], + destination[E_AXIS] + EXTRUDER_RUNOUT_EXTRUDE * EXTRUDER_RUNOUT_ESTEPS / axis_steps_per_unit[E_AXIS], + EXTRUDER_RUNOUT_SPEED / 60. * EXTRUDER_RUNOUT_ESTEPS / axis_steps_per_unit[E_AXIS], active_extruder); + current_position[E_AXIS] = oldepos; + destination[E_AXIS] = oldedes; + plan_set_e_position(oldepos); + previous_millis_cmd = ms; // refresh_cmd_timeout() + st_synchronize(); + switch(active_extruder) { + case 0: + E0_ENABLE_WRITE(oldstatus); + break; + #if EXTRUDERS > 1 + case 1: + E1_ENABLE_WRITE(oldstatus); + break; + #if EXTRUDERS > 2 + case 2: + E2_ENABLE_WRITE(oldstatus); + break; + #if EXTRUDERS > 3 + case 3: + E3_ENABLE_WRITE(oldstatus); + break; + #endif + #endif + #endif + } } #endif -#if defined(HOME_PIN) && HOME_PIN > -1 - // Check to see if we have to home, use poor man's debouncer - // --------------------------------------------------------- - if ( 0 == READ(HOME_PIN) ) - { - if (homeDebounceCount == 0) - { - enquecommands_P((PSTR("G28"))); - homeDebounceCount++; - LCD_ALERTMESSAGEPGM(MSG_AUTO_HOME); - } - else if (homeDebounceCount < HOME_DEBOUNCE_DELAY) - { - homeDebounceCount++; - } - else - { - homeDebounceCount = 0; - } - } -#endif - - #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1 - controllerFan(); //Check if fan should be turned on to cool stepper drivers down - #endif - #ifdef EXTRUDER_RUNOUT_PREVENT - if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) - if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP) - { - bool oldstatus=E0_ENABLE_READ; - enable_e0(); - float oldepos=current_position[E_AXIS]; - float oldedes=destination[E_AXIS]; - plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], - destination[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], - EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], active_extruder); - current_position[E_AXIS]=oldepos; - destination[E_AXIS]=oldedes; - plan_set_e_position(oldepos); - previous_millis_cmd=millis(); - st_synchronize(); - E0_ENABLE_WRITE(oldstatus); - } - #endif - #if defined(DUAL_X_CARRIAGE) + #ifdef DUAL_X_CARRIAGE // handle delayed move timeout - if (delayed_move_time != 0 && (millis() - delayed_move_time) > 1000 && Stopped == false) - { + if (delayed_move_time && ms > delayed_move_time + 1000 && !Stopped) { // travel moves have been received so enact them delayed_move_time = 0xFFFFFFFFUL; // force moves to be done - memcpy(destination,current_position,sizeof(destination)); + set_destination_to_current(); prepare_move(); } #endif + #ifdef TEMP_STAT_LEDS - handle_status_leds(); + handle_status_leds(); #endif + check_axes_activity(); } @@ -5898,13 +5899,7 @@ void kill() cli(); // Stop interrupts disable_heater(); - disable_x(); - disable_y(); - disable_z(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); + disable_all_steppers(); #if HAS_POWER_SWITCH pinMode(PS_ON_PIN, INPUT); @@ -6017,10 +6012,10 @@ void setPwmFrequency(uint8_t pin, int val) #endif //FAST_PWM_FAN bool setTargetedHotend(int code){ - tmp_extruder = active_extruder; - if(code_seen('T')) { - tmp_extruder = code_value(); - if(tmp_extruder >= EXTRUDERS) { + target_extruder = active_extruder; + if (code_seen('T')) { + target_extruder = code_value_short(); + if (target_extruder >= EXTRUDERS) { SERIAL_ECHO_START; switch(code){ case 104: @@ -6039,7 +6034,7 @@ bool setTargetedHotend(int code){ SERIAL_ECHO(MSG_M221_INVALID_EXTRUDER); break; } - SERIAL_ECHOLN(tmp_extruder); + SERIAL_ECHOLN(target_extruder); return true; } } diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 8c05f83bc..d92938c1d 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -56,7 +56,7 @@ #if EXTRUDERS > 1 #if EXTRUDERS > 4 - #error The maximum number of EXTRUDERS is 4. + #error The maximum number of EXTRUDERS in Marlin is 4. #endif #ifdef TEMP_SENSOR_1_AS_REDUNDANT @@ -77,6 +77,13 @@ #endif // EXTRUDERS > 1 + /** + * Limited number of servos + */ + #if NUM_SERVOS > 4 + #error The maximum number of SERVOS in Marlin is 4. + #endif + /** * Required LCD language */ @@ -93,13 +100,39 @@ * Require a Z Min pin */ #if Z_MIN_PIN == -1 - #ifdef Z_PROBE_REPEATABILITY_TEST - #error You must have a Z_MIN endstop to enable Z_PROBE_REPEATABILITY_TEST. - #else - #error ENABLE_AUTO_BED_LEVELING requires a Z_MIN endstop. Z_MIN_PIN must point to a valid hardware pin. + #if Z_PROBE_PIN == -1 || (!defined(Z_PROBE_ENDSTOP) || defined(DISABLE_Z_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z Probe, but not enable it. + #ifdef Z_PROBE_REPEATABILITY_TEST + #error You must have a Z_MIN or Z_PROBE endstop to enable Z_PROBE_REPEATABILITY_TEST. + #else + #error ENABLE_AUTO_BED_LEVELING requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_PROBE_PIN must point to a valid hardware pin. + #endif #endif #endif + /** + * Require a Z Probe Pin if Z_PROBE_ENDSTOP is enabled. + */ + #if defined(Z_PROBE_ENDSTOP) + #ifndef Z_PROBE_PIN + #error You must have a Z_PROBE_PIN defined in your pins_XXXX.h file if you enable Z_PROBE_ENDSTOP + #endif + #if Z_PROBE_PIN == -1 + #error You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP + #endif +// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment. +// #ifndef NUM_SERVOS +// #error You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP +// #endif +// #if defined(NUM_SERVOS) && NUM_SERVOS < 1 +// #error You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP +// #endif +// #ifndef SERVO_ENDSTOPS +// #error You must have SERVO_ENDSTOPS defined and have the Z index set to at least 0 or above to use Z_PROBE_ENDSTOP +// #endif +// #ifndef SERVO_ENDSTOP_ANGLES +// #error You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_AND_ENSTOP +// #endif + #endif /** * Check if Probe_Offset * Grid Points is greater than Probing Range */ @@ -209,9 +242,9 @@ */ #ifdef DUAL_X_CARRIAGE #if EXTRUDERS == 1 || defined(COREXY) \ - || !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \ + || !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR \ || !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \ - || !defined(X_MAX_PIN) || X_MAX_PIN < 0 + || !HAS_X_MAX #error Missing or invalid definitions for DUAL_X_CARRIAGE mode. #endif #if X_HOME_DIR != -1 || X2_HOME_DIR != 1 @@ -234,6 +267,10 @@ #endif #endif + #if HAS_FAN && CONTROLLERFAN_PIN == FAN_PIN + #error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN + #endif + /** * Test required HEATER defines */ @@ -254,4 +291,11 @@ #error HEATER_0_PIN not defined for this board #endif + /** + * Warnings for old configurations + */ + #ifdef X_HOME_RETRACT_MM + #error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM + #endif + #endif //SANITYCHECK_H diff --git a/Marlin/Servo.h b/Marlin/Servo.h index bbdf6bf0a..682a3b379 100644 --- a/Marlin/Servo.h +++ b/Marlin/Servo.h @@ -123,7 +123,7 @@ class Servo { int read(); // returns current pulse width as an angle between 0 and 180 degrees int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release) bool attached(); // return true if this servo is attached, otherwise false - #if defined (ENABLE_AUTO_BED_LEVELING) && (PROBE_SERVO_DEACTIVATION_DELAY > 0) + #if defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0 int pin; // store the hardware pin of the servo #endif private: diff --git a/Marlin/boards.h b/Marlin/boards.h index a8c980097..8a60f011d 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -37,6 +37,7 @@ #define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646) #define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286) #define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make +#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286) #define BOARD_GEN3_PLUS 9 // Gen3+ #define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics #define BOARD_MEGATRONICS 70 // Megatronics diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp index fae6c1be6..877b72b92 100644 --- a/Marlin/cardreader.cpp +++ b/Marlin/cardreader.cpp @@ -249,7 +249,7 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/) if (!myDir.open(curDir, subdirname, O_READ)) { SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOL(subdirname); - SERIAL_PROTOCOLLNPGM("."); + SERIAL_PROTOCOLCHAR('.'); return; } else { @@ -287,14 +287,14 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/) else { SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOL(fname); - SERIAL_PROTOCOLLNPGM("."); + SERIAL_PROTOCOLCHAR('.'); } } else { //write if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOL(fname); - SERIAL_PROTOCOLLNPGM("."); + SERIAL_PROTOCOLCHAR('.'); } else { saving = true; @@ -330,7 +330,7 @@ void CardReader::removeFile(char* name) { if (!myDir.open(curDir, subdirname, O_READ)) { SERIAL_PROTOCOLPGM("open failed, File: "); SERIAL_PROTOCOL(subdirname); - SERIAL_PROTOCOLLNPGM("."); + SERIAL_PROTOCOLCHAR('.'); return; } else { @@ -360,7 +360,7 @@ void CardReader::removeFile(char* name) { else { SERIAL_PROTOCOLPGM("Deletion failed, File: "); SERIAL_PROTOCOL(fname); - SERIAL_PROTOCOLLNPGM("."); + SERIAL_PROTOCOLCHAR('.'); } } @@ -368,7 +368,7 @@ void CardReader::getStatus() { if (cardOK) { SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE); SERIAL_PROTOCOL(sdpos); - SERIAL_PROTOCOLPGM("/"); + SERIAL_PROTOCOLCHAR('/'); SERIAL_PROTOCOLLN(filesize); } else { diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 7868e8e81..5b0960fdd 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -412,7 +412,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -519,6 +519,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -539,8 +553,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // @section movement -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h index 21b30580c..8acdeb969 100644 --- a/Marlin/configurator/config/Configuration_adv.h +++ b/Marlin/configurator/config/Configuration_adv.h @@ -189,9 +189,9 @@ // @section homing //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h index 63e99bd3a..c057e5642 100644 --- a/Marlin/dogm_lcd_implementation.h +++ b/Marlin/dogm_lcd_implementation.h @@ -300,7 +300,7 @@ static void lcd_implementation_status_screen() { // Fan lcd_setFont(FONT_STATUSMENU); u8g.setPrintPos(104,27); - #if defined(FAN_PIN) && FAN_PIN > -1 + #if HAS_FAN int per = ((fanSpeed + 1) * 100) / 256; if (per) { diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 1cc50246a..72d716989 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -364,7 +364,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -469,6 +469,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -485,8 +499,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index 956e2dc47..e6683b4e8 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -364,7 +364,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -469,6 +469,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -485,8 +499,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 9bbd515ca..d60eb5296 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 3 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 3 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 594295a3e..ac101be4d 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -387,7 +387,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -492,6 +492,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -508,8 +522,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {2000, 2000, 150, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index bac3b571a..0529df9be 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index c17e419c7..6d743e937 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -392,7 +392,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -497,6 +497,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -513,8 +527,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 9bbd515ca..d60eb5296 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 3 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 3 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 96fef00cf..f126ab99b 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -416,7 +416,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -521,6 +521,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -537,8 +551,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define MANUAL_Z_HOME_POS 0.1 // Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {40*60, 40*60, 10*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 7b00532e4..5145b1668 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 3 -#define Y_HOME_RETRACT_MM 3 -#define Z_HOME_RETRACT_MM 3 +#define X_HOME_BUMP_MM 3 +#define Y_HOME_BUMP_MM 3 +#define Z_HOME_BUMP_MM 3 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 190270e85..265f73fce 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -386,7 +386,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -491,6 +491,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -507,8 +521,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {120*60, 120*60, 7.2*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 965ecbf40..ab480dd63 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 4aeb5d55f..3218d2d9d 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -414,7 +414,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -507,10 +507,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define Z_PROBE_ALLEN_KEY_DEPLOY_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_Z 100 - #define Z_PROBE_ALLEN_KEY_RETRACT_X -64 - #define Z_PROBE_ALLEN_KEY_RETRACT_Y 56 - #define Z_PROBE_ALLEN_KEY_RETRACT_Z 23 - #define Z_PROBE_ALLEN_KEY_RETRACT_DEPTH 20 + #define Z_PROBE_ALLEN_KEY_STOW_X -64 + #define Z_PROBE_ALLEN_KEY_STOW_Y 56 + #define Z_PROBE_ALLEN_KEY_STOW_Z 23 + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 #endif //If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk @@ -537,6 +537,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -552,8 +566,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + // delta homing speeds must be the same on xyz #define HOMING_FEEDRATE {200*60, 200*60, 200*60, 0} // set the homing speeds (mm/min) diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index abecacec2..501cd814d 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index edb7ff526..489dca6d5 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -414,7 +414,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -511,10 +511,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define Z_PROBE_ALLEN_KEY_DEPLOY_Y DELTA_PRINTABLE_RADIUS #define Z_PROBE_ALLEN_KEY_DEPLOY_Z 100 - #define Z_PROBE_ALLEN_KEY_RETRACT_X -64 - #define Z_PROBE_ALLEN_KEY_RETRACT_Y 56 - #define Z_PROBE_ALLEN_KEY_RETRACT_Z 23 - #define Z_PROBE_ALLEN_KEY_RETRACT_DEPTH 20 + #define Z_PROBE_ALLEN_KEY_STOW_X -64 + #define Z_PROBE_ALLEN_KEY_STOW_Y 56 + #define Z_PROBE_ALLEN_KEY_STOW_Z 23 + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 #endif //If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk @@ -541,6 +541,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -556,8 +570,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + // delta homing speeds must be the same on xyz #define HOMING_FEEDRATE {200*60, 200*60, 200*60, 0} // set the homing speeds (mm/min) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index b255000bc..c402064bf 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axis #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index a3e8fd088..45350960f 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -384,7 +384,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -489,6 +489,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -505,8 +519,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {1500, 1500, 120, 0} // set the homing speeds (mm/min) ***** MakiBox A6 ***** // default settings diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 5e0e6ef4d..3db90efcf 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 2 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 7ffff3353..2c98a310f 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -386,7 +386,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_MIN_X 10 #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) #define MESH_MIN_Y 10 @@ -491,6 +491,20 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #endif + // Support for a dedicated Z PROBE endstop separate from the Z MIN endstop. + // If you would like to use both a Z PROBE and a Z MIN endstop together or just a Z PROBE with a custom pin, uncomment #define Z_PROBE_ENDSTOP and read the instructions below. + // If you want to still use the Z min endstop for homing, disable Z_SAFE_HOMING above. Eg; to park the head outside the bed area when homing with G28. + // WARNING: The Z MIN endstop will need to set properly as it would without a Z PROBE to prevent head crashes and premature stopping during a print. + // To use a separate Z PROBE endstop, you must have a Z_PROBE_PIN defined in the pins.h file for your control board. + // If you are using a servo based Z PROBE, you will need to enable NUM_SERVOS, SERVO_ENDSTOPS and SERVO_ENDSTOPS_ANGLES in the R/C Servo below. + // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin in the Aux 4 section of the RAMPS board. Use 5V for powered sensors, otherwise connect to ground and D32 + // for normally closed configuration and 5V and D32 for normally open configurations. Normally closed configuration is advised and assumed. + // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin. Z_PROBE_PIN is setting the pin to use on the Arduino. Since the D32 pin on the RAMPS maps to D32 on Arduino, this works. + // D32 is currently selected in the RAMPS 1.3/1.4 pin file. All other boards will need changes to the respective pins_XXXXX.h file. + // WARNING: Setting the wrong pin may have unexpected and potentially disastrous outcomes. Use with caution and do your homework. + + //#define Z_PROBE_ENDSTOP + #endif // ENABLE_AUTO_BED_LEVELING @@ -507,8 +521,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif -//// MOVEMENT SETTINGS -#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +/** + * MOVEMENT SETTINGS + */ + #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) // default settings diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index bbf7dc005..2ecf75951 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -175,9 +175,9 @@ #endif //DUAL_X_CARRIAGE //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: -#define X_HOME_RETRACT_MM 5 -#define Y_HOME_RETRACT_MM 5 -#define Z_HOME_RETRACT_MM 1 +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 1 #define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 3087e87f2..0e3b34d25 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -91,7 +91,7 @@ added as necessary or if I feel like it- not a comprehensive list! */ -#if defined (__AVR_ATmega168__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__) +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) // UART #define RXD DIO0 #define TXD DIO1 @@ -426,7 +426,7 @@ pins #define PD7_PWM NULL #endif /* _AVR_ATmega{168,328,328P}__ */ -#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) || defined (__AVR_ATmega1284P__) +#if defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__) // UART #define RXD DIO8 #define TXD DIO9 @@ -929,7 +929,7 @@ pins #define PD7_PWM OCR2A #endif /* _AVR_ATmega{644,644P,644PA}__ */ -#if defined (__AVR_ATmega1280__) || defined (__AVR_ATmega2560__) +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) // UART #define RXD DIO0 #define TXD DIO1 @@ -2024,7 +2024,7 @@ pins #endif -#if defined (__AVR_AT90USB1287__) || defined (__AVR_AT90USB1286__) || defined (__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) +#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) // SPI #define SCK DIO9 #define MISO DIO11 @@ -3322,7 +3322,7 @@ Teensy 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 #endif // __AVR_AT90usbxxx__ -#if defined (__AVR_ATmega1281__) || defined (__AVR_ATmega2561__) +#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) // UART #define RXD DIO0 #define TXD DIO1 diff --git a/Marlin/language.h b/Marlin/language.h index 10ef445d8..3fe7afd2e 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -36,18 +36,19 @@ #define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en) #endif +#ifdef HAS_AUTOMATIC_VERSIONING + #include "_Version.h" +#endif + #define PROTOCOL_VERSION "1.0" -#define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin" #if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2) - #undef FIRMWARE_URL #define MACHINE_NAME "Ultimaker" #define FIRMWARE_URL "http://firmware.ultimaker.com" #elif MB(RUMBA) #define MACHINE_NAME "Rumba" #elif MB(3DRAG) #define MACHINE_NAME "3Drag" - #undef FIRMWARE_URL #define FIRMWARE_URL "http://3dprint.elettronicain.it/" #elif MB(K8200) #define MACHINE_NAME "K8200" @@ -55,23 +56,40 @@ #define MACHINE_NAME "Makibox" #elif MB(SAV_MKI) #define MACHINE_NAME "SAV MkI" - #undef FIRMWARE_URL #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config" #elif MB(WITBOX) #define MACHINE_NAME "WITBOX" - #undef FIRMWARE_URL #define FIRMWARE_URL "http://www.bq.com/gb/downloads-witbox.html" #elif MB(HEPHESTOS) #define MACHINE_NAME "HEPHESTOS" - #undef FIRMWARE_URL #define FIRMWARE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html" -#else // Default firmware set to Mendel - #define MACHINE_NAME "Mendel" +#elif MB(BRAINWAVE_PRO) + #define MACHINE_NAME "Kossel Pro" + #ifndef FIRMWARE_URL + #define FIRMWARE_URL "https://github.com/OpenBeamUSA/Marlin/" + #endif +#else + #ifndef MACHINE_NAME + #define MACHINE_NAME "Mendel" + #endif #endif #ifdef CUSTOM_MENDEL_NAME + #warning CUSTOM_MENDEL_NAME deprecated - use CUSTOM_MACHINE_NAME + #define CUSTOM_MACHINE_NAME CUSTOM_MENDEL_NAME +#endif + +#ifdef CUSTOM_MACHINE_NAME #undef MACHINE_NAME - #define MACHINE_NAME CUSTOM_MENDEL_NAME + #define MACHINE_NAME CUSTOM_MACHINE_NAME +#endif + +#ifndef FIRMWARE_URL + #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin" +#endif + +#ifndef BUILD_VERSION + #define BUILD_VERSION "V1; Sprinter/grbl mashup for gen6" #endif #ifndef MACHINE_UUID @@ -122,7 +140,7 @@ #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating." #define MSG_BED_DONE "Bed done." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin " BUILD_VERSION " FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X: " #define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" @@ -138,6 +156,7 @@ #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_Z2_MAX "z2_max: " +#define MSG_Z_PROBE "z_probe: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" diff --git a/Marlin/mesh_bed_leveling.h b/Marlin/mesh_bed_leveling.h index b6c4ed5b0..bf7275e5c 100644 --- a/Marlin/mesh_bed_leveling.h +++ b/Marlin/mesh_bed_leveling.h @@ -1,6 +1,6 @@ #include "Marlin.h" -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #define MESH_X_DIST ((MESH_MAX_X - MESH_MIN_X)/(MESH_NUM_X_POINTS - 1)) #define MESH_Y_DIST ((MESH_MAX_Y - MESH_MIN_Y)/(MESH_NUM_Y_POINTS - 1)) diff --git a/Marlin/pins.h b/Marlin/pins.h index 3c75a73ba..e5af0af17 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -187,6 +187,10 @@ #define Z_MIN_PIN -1 #endif +#if defined(DISABLE_Z_PROBE_ENDSTOP) || !defined(Z_PROBE_ENDSTOP) // Allow code to compile regardless of Z_PROBE_ENDSTOP setting. + #define Z_PROBE_PIN -1 +#endif + #ifdef DISABLE_XMAX_ENDSTOP #undef X_MAX_PIN #define X_MAX_PIN -1 @@ -216,8 +220,11 @@ #define Z_MIN_PIN -1 #endif -#define SENSITIVE_PINS { 0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \ - HEATER_BED_PIN, FAN_PIN, \ +#define SENSITIVE_PINS { 0, 1, \ + X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \ + Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ + Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_PROBE_PIN, \ + PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS \ analogInputToDigitalPin(TEMP_BED_PIN) \ } diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h index 0cdc71601..d76874a09 100644 --- a/Marlin/pins_AZTEEG_X3_PRO.h +++ b/Marlin/pins_AZTEEG_X3_PRO.h @@ -34,7 +34,12 @@ #define Z_MAX_PIN 18 #endif // - + #ifdef Z_PROBE_ENDSTOP +//#undef Z_MIN_PIN +//#define Z_MIN_PIN 15 + #define Z_PROBE_PIN 19 + #endif +// #define E2_STEP_PIN 23 #define E2_DIR_PIN 25 #define E2_ENABLE_PIN 40 diff --git a/Marlin/pins_RAMPS_13.h b/Marlin/pins_RAMPS_13.h index 71287f683..2708117d0 100644 --- a/Marlin/pins_RAMPS_13.h +++ b/Marlin/pins_RAMPS_13.h @@ -34,6 +34,7 @@ #define Z_ENABLE_PIN 62 #define Z_MIN_PIN 18 #define Z_MAX_PIN 19 +#define Z_PROBE_PIN -1 #define Y2_STEP_PIN 36 #define Y2_DIR_PIN 34 @@ -61,7 +62,12 @@ #define FILWIDTH_PIN 5 #endif -#if defined(FILAMENT_RUNOUT_SENSOR) +#ifdef Z_PROBE_ENDSTOP + // Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop. + #define Z_PROBE_PIN 32 +#endif + +#ifdef FILAMENT_RUNOUT_SENSOR // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector #define FILRUNOUT_PIN 4 #endif diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index d98ef63d4..dcfbe674c 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -58,7 +58,7 @@ #include "ultralcd.h" #include "language.h" -#if defined(MESH_BED_LEVELING) +#ifdef MESH_BED_LEVELING #include "mesh_bed_leveling.h" #endif // MESH_BED_LEVELING @@ -67,7 +67,7 @@ //=========================================================================== unsigned long minsegmenttime; -float max_feedrate[NUM_AXIS]; // set the max speeds +float max_feedrate[NUM_AXIS]; // Max speeds in mm per minute float axis_steps_per_unit[NUM_AXIS]; unsigned long max_acceleration_units_per_sq_second[NUM_AXIS]; // Use M201 to override by software float minimumfeedrate; @@ -427,7 +427,7 @@ void check_axes_activity() { disable_e3(); } - #if defined(FAN_PIN) && FAN_PIN > -1 // HAS_FAN + #if HAS_FAN #ifdef FAN_KICKSTART_TIME static unsigned long fan_kick_end; if (tail_fan_speed) { @@ -447,17 +447,17 @@ void check_axes_activity() { #else analogWrite(FAN_PIN, tail_fan_speed); #endif //!FAN_SOFT_PWM - #endif //FAN_PIN > -1 + #endif // HAS_FAN #ifdef AUTOTEMP getHighESpeed(); #endif #ifdef BARICUDA - #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1 // HAS_HEATER_1 + #if HAS_HEATER_1 analogWrite(HEATER_1_PIN,tail_valve_pressure); #endif - #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1 // HAS_HEATER_2 + #if HAS_HEATER_2 analogWrite(HEATER_2_PIN,tail_e_to_p_pressure); #endif #endif @@ -614,7 +614,7 @@ float junction_deviation = 0.1; #if EXTRUDERS > 1 case 1: enable_e1(); - g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE*2; + g_uc_extruder_last_move[1] = BLOCK_BUFFER_SIZE * 2; if (g_uc_extruder_last_move[0] == 0) disable_e0(); #if EXTRUDERS > 2 if (g_uc_extruder_last_move[2] == 0) disable_e2(); @@ -626,7 +626,7 @@ float junction_deviation = 0.1; #if EXTRUDERS > 2 case 2: enable_e2(); - g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE*2; + g_uc_extruder_last_move[2] = BLOCK_BUFFER_SIZE * 2; if (g_uc_extruder_last_move[0] == 0) disable_e0(); if (g_uc_extruder_last_move[1] == 0) disable_e1(); #if EXTRUDERS > 3 @@ -636,7 +636,7 @@ float junction_deviation = 0.1; #if EXTRUDERS > 3 case 3: enable_e3(); - g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2; + g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE * 2; if (g_uc_extruder_last_move[0] == 0) disable_e0(); if (g_uc_extruder_last_move[1] == 0) disable_e1(); if (g_uc_extruder_last_move[2] == 0) disable_e2(); diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index a7dba4659..ba4a4e967 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -76,6 +76,7 @@ volatile long endstops_stepsTotal, endstops_stepsDone; static volatile bool endstop_x_hit = false; static volatile bool endstop_y_hit = false; static volatile bool endstop_z_hit = false; +static volatile bool endstop_z_probe_hit = false; // Leaving this in even if Z_PROBE_ENDSTOP isn't defined, keeps code below cleaner. #ifdef it and usage below to save space. #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED bool abort_on_endstop_hit = false; @@ -85,33 +86,37 @@ static volatile bool endstop_z_hit = false; int motor_current_setting[3] = DEFAULT_PWM_MOTOR_CURRENT; #endif -#if defined(X_MIN_PIN) && X_MIN_PIN >= 0 +#if HAS_X_MIN static bool old_x_min_endstop = false; #endif -#if defined(X_MAX_PIN) && X_MAX_PIN >= 0 +#if HAS_X_MAX static bool old_x_max_endstop = false; #endif -#if defined(Y_MIN_PIN) && Y_MIN_PIN >= 0 +#if HAS_Y_MIN static bool old_y_min_endstop = false; #endif -#if defined(Y_MAX_PIN) && Y_MAX_PIN >= 0 +#if HAS_Y_MAX static bool old_y_max_endstop = false; #endif -#if defined(Z_MIN_PIN) && Z_MIN_PIN >= 0 +#if HAS_Z_MIN static bool old_z_min_endstop = false; #endif -#if defined(Z_MAX_PIN) && Z_MAX_PIN >= 0 +#if HAS_Z_MAX static bool old_z_max_endstop = false; #endif #ifdef Z_DUAL_ENDSTOPS - #if defined(Z2_MIN_PIN) && Z2_MIN_PIN >= 0 + #if HAS_Z2_MIN static bool old_z2_min_endstop = false; #endif - #if defined(Z2_MAX_PIN) && Z2_MAX_PIN >= 0 + #if HAS_Z2_MAX static bool old_z2_max_endstop = false; #endif #endif +#ifdef Z_PROBE_ENDSTOP // No need to check for valid pin, SanityCheck.h already does this. +static bool old_z_probe_endstop = false; +#endif + static bool check_endstops = true; volatile long count_position[NUM_AXIS] = { 0 }; @@ -254,11 +259,11 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; #define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~BIT(OCIE1A) void endstops_hit_on_purpose() { - endstop_x_hit = endstop_y_hit = endstop_z_hit = false; + endstop_x_hit = endstop_y_hit = endstop_z_hit = endstop_z_probe_hit = false; // #ifdef endstop_z_probe_hit = to save space if needed. } void checkHitEndstops() { - if (endstop_x_hit || endstop_y_hit || endstop_z_hit) { + if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit) { // #ifdef || endstop_z_probe_hit to save space if needed. SERIAL_ECHO_START; SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT); if (endstop_x_hit) { @@ -273,6 +278,12 @@ void checkHitEndstops() { SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z"); } + #ifdef Z_PROBE_ENDSTOP + if (endstop_z_probe_hit) { + SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); + LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP"); + } + #endif SERIAL_EOL; endstops_hit_on_purpose(); @@ -472,7 +483,7 @@ ISR(TIMER1_COMPA_vect) { if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1)) #endif { - #if defined(X_MIN_PIN) && X_MIN_PIN >= 0 + #if HAS_X_MIN UPDATE_ENDSTOP(x, X, min, MIN); #endif } @@ -483,7 +494,7 @@ ISR(TIMER1_COMPA_vect) { if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1)) #endif { - #if defined(X_MAX_PIN) && X_MAX_PIN >= 0 + #if HAS_X_MAX UPDATE_ENDSTOP(x, X, max, MAX); #endif } @@ -498,12 +509,12 @@ ISR(TIMER1_COMPA_vect) { if (TEST(out_bits, Y_AXIS)) // -direction #endif { // -direction - #if defined(Y_MIN_PIN) && Y_MIN_PIN >= 0 + #if HAS_Y_MIN UPDATE_ENDSTOP(y, Y, min, MIN); #endif } else { // +direction - #if defined(Y_MAX_PIN) && Y_MAX_PIN >= 0 + #if HAS_Y_MAX UPDATE_ENDSTOP(y, Y, max, MAX); #endif } @@ -519,13 +530,13 @@ ISR(TIMER1_COMPA_vect) { if (check_endstops) { - #if defined(Z_MIN_PIN) && Z_MIN_PIN >= 0 + #if HAS_Z_MIN #ifdef Z_DUAL_ENDSTOPS bool z_min_endstop = READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING, z2_min_endstop = - #if defined(Z2_MIN_PIN) && Z2_MIN_PIN >= 0 + #if HAS_Z2_MIN READ(Z2_MIN_PIN) != Z2_MIN_ENDSTOP_INVERTING #else z_min_endstop @@ -551,6 +562,19 @@ ISR(TIMER1_COMPA_vect) { #endif // Z_MIN_PIN + #ifdef Z_PROBE_ENDSTOP + UPDATE_ENDSTOP(z, Z, probe, PROBE); + z_probe_endstop=(READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING); + if(z_probe_endstop && old_z_probe_endstop) + { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_probe_hit=true; + +// if (z_probe_endstop && old_z_probe_endstop) SERIAL_ECHOLN("z_probe_endstop = true"); + } + old_z_probe_endstop = z_probe_endstop; + #endif + } // check_endstops } @@ -561,13 +585,13 @@ ISR(TIMER1_COMPA_vect) { if (check_endstops) { - #if defined(Z_MAX_PIN) && Z_MAX_PIN >= 0 + #if HAS_Z_MAX #ifdef Z_DUAL_ENDSTOPS bool z_max_endstop = READ(Z_MAX_PIN) != Z_MAX_ENDSTOP_INVERTING, z2_max_endstop = - #if defined(Z2_MAX_PIN) && Z2_MAX_PIN >= 0 + #if HAS_Z2_MAX READ(Z2_MAX_PIN) != Z2_MAX_ENDSTOP_INVERTING #else z_max_endstop @@ -596,6 +620,18 @@ ISR(TIMER1_COMPA_vect) { #endif // !Z_DUAL_ENDSTOPS #endif // Z_MAX_PIN + + #ifdef Z_PROBE_ENDSTOP + UPDATE_ENDSTOP(z, Z, probe, PROBE); + z_probe_endstop=(READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING); + if(z_probe_endstop && old_z_probe_endstop) + { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_probe_hit=true; +// if (z_probe_endstop && old_z_probe_endstop) SERIAL_ECHOLN("z_probe_endstop = true"); + } + old_z_probe_endstop = z_probe_endstop; + #endif } // check_endstops @@ -679,7 +715,7 @@ ISR(TIMER1_COMPA_vect) { step_events_completed++; if (step_events_completed >= current_block->step_event_count) break; } - // Calculare new timer value + // Calculate new timer value unsigned short timer; unsigned short step_rate; if (step_events_completed <= (unsigned long int)current_block->accelerate_until) { @@ -835,133 +871,140 @@ void st_init() { #endif // Initialize Dir Pins - #if defined(X_DIR_PIN) && X_DIR_PIN >= 0 + #if HAS_X_DIR X_DIR_INIT; #endif - #if defined(X2_DIR_PIN) && X2_DIR_PIN >= 0 + #if HAS_X2_DIR X2_DIR_INIT; #endif - #if defined(Y_DIR_PIN) && Y_DIR_PIN >= 0 + #if HAS_Y_DIR Y_DIR_INIT; - #if defined(Y_DUAL_STEPPER_DRIVERS) && defined(Y2_DIR_PIN) && Y2_DIR_PIN >= 0 + #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR Y2_DIR_INIT; #endif #endif - #if defined(Z_DIR_PIN) && Z_DIR_PIN >= 0 + #if HAS_Z_DIR Z_DIR_INIT; - #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_DIR_PIN) && Z2_DIR_PIN >= 0 + #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR Z2_DIR_INIT; #endif #endif - #if defined(E0_DIR_PIN) && E0_DIR_PIN >= 0 + #if HAS_E0_DIR E0_DIR_INIT; #endif - #if defined(E1_DIR_PIN) && E1_DIR_PIN >= 0 + #if HAS_E1_DIR E1_DIR_INIT; #endif - #if defined(E2_DIR_PIN) && E2_DIR_PIN >= 0 + #if HAS_E2_DIR E2_DIR_INIT; #endif - #if defined(E3_DIR_PIN) && E3_DIR_PIN >= 0 + #if HAS_E3_DIR E3_DIR_INIT; #endif //Initialize Enable Pins - steppers default to disabled. - #if defined(X_ENABLE_PIN) && X_ENABLE_PIN >= 0 + #if HAS_X_ENABLE X_ENABLE_INIT; if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH); #endif - #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN >= 0 + #if HAS_X2_ENABLE X2_ENABLE_INIT; if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH); #endif - #if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN >= 0 + #if HAS_Y_ENABLE Y_ENABLE_INIT; if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH); - #if defined(Y_DUAL_STEPPER_DRIVERS) && defined(Y2_ENABLE_PIN) && Y2_ENABLE_PIN >= 0 + #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE Y2_ENABLE_INIT; if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH); #endif #endif - #if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN >= 0 + #if HAS_Z_ENABLE Z_ENABLE_INIT; if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH); - #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_ENABLE_PIN) && Z2_ENABLE_PIN >= 0 + #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE Z2_ENABLE_INIT; if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH); #endif #endif - #if defined(E0_ENABLE_PIN) && E0_ENABLE_PIN >= 0 + #if HAS_E0_ENABLE E0_ENABLE_INIT; if (!E_ENABLE_ON) E0_ENABLE_WRITE(HIGH); #endif - #if defined(E1_ENABLE_PIN) && E1_ENABLE_PIN >= 0 + #if HAS_E1_ENABLE E1_ENABLE_INIT; if (!E_ENABLE_ON) E1_ENABLE_WRITE(HIGH); #endif - #if defined(E2_ENABLE_PIN) && E2_ENABLE_PIN >= 0 + #if HAS_E2_ENABLE E2_ENABLE_INIT; if (!E_ENABLE_ON) E2_ENABLE_WRITE(HIGH); #endif - #if defined(E3_ENABLE_PIN) && E3_ENABLE_PIN >= 0 + #if HAS_E3_ENABLE E3_ENABLE_INIT; if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH); #endif //endstops and pullups - #if defined(X_MIN_PIN) && X_MIN_PIN >= 0 + #if HAS_X_MIN SET_INPUT(X_MIN_PIN); #ifdef ENDSTOPPULLUP_XMIN WRITE(X_MIN_PIN,HIGH); #endif #endif - #if defined(Y_MIN_PIN) && Y_MIN_PIN >= 0 + #if HAS_Y_MIN SET_INPUT(Y_MIN_PIN); #ifdef ENDSTOPPULLUP_YMIN WRITE(Y_MIN_PIN,HIGH); #endif #endif - #if defined(Z_MIN_PIN) && Z_MIN_PIN >= 0 + #if HAS_Z_MIN SET_INPUT(Z_MIN_PIN); #ifdef ENDSTOPPULLUP_ZMIN WRITE(Z_MIN_PIN,HIGH); #endif #endif - #if defined(X_MAX_PIN) && X_MAX_PIN >= 0 + #if HAS_X_MAX SET_INPUT(X_MAX_PIN); #ifdef ENDSTOPPULLUP_XMAX WRITE(X_MAX_PIN,HIGH); #endif #endif - #if defined(Y_MAX_PIN) && Y_MAX_PIN >= 0 + #if HAS_Y_MAX SET_INPUT(Y_MAX_PIN); #ifdef ENDSTOPPULLUP_YMAX WRITE(Y_MAX_PIN,HIGH); #endif #endif - #if defined(Z_MAX_PIN) && Z_MAX_PIN >= 0 + #if HAS_Z_MAX SET_INPUT(Z_MAX_PIN); #ifdef ENDSTOPPULLUP_ZMAX WRITE(Z_MAX_PIN,HIGH); #endif #endif - #if defined(Z2_MAX_PIN) && Z2_MAX_PIN >= 0 + #if HAS_Z2_MAX SET_INPUT(Z2_MAX_PIN); #ifdef ENDSTOPPULLUP_ZMAX WRITE(Z2_MAX_PIN,HIGH); #endif #endif +#if (defined(Z_PROBE_PIN) && Z_PROBE_PIN >= 0) && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used. + SET_INPUT(Z_PROBE_PIN); + #ifdef ENDSTOPPULLUP_ZPROBE + WRITE(Z_PROBE_PIN,HIGH); + #endif +#endif + #define AXIS_INIT(axis, AXIS, PIN) \ AXIS ##_STEP_INIT; \ AXIS ##_STEP_WRITE(INVERT_## PIN ##_STEP_PIN); \ @@ -970,36 +1013,36 @@ void st_init() { #define E_AXIS_INIT(NUM) AXIS_INIT(e## NUM, E## NUM, E) // Initialize Step Pins - #if defined(X_STEP_PIN) && X_STEP_PIN >= 0 + #if HAS_X_STEP AXIS_INIT(x, X, X); #endif - #if defined(X2_STEP_PIN) && X2_STEP_PIN >= 0 + #if HAS_X2_STEP AXIS_INIT(x, X2, X); #endif - #if defined(Y_STEP_PIN) && Y_STEP_PIN >= 0 - #if defined(Y_DUAL_STEPPER_DRIVERS) && defined(Y2_STEP_PIN) && Y2_STEP_PIN >= 0 + #if HAS_Y_STEP + #if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_STEP Y2_STEP_INIT; Y2_STEP_WRITE(INVERT_Y_STEP_PIN); #endif AXIS_INIT(y, Y, Y); #endif - #if defined(Z_STEP_PIN) && Z_STEP_PIN >= 0 - #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_STEP_PIN) && Z2_STEP_PIN >= 0 + #if HAS_Z_STEP + #if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_STEP Z2_STEP_INIT; Z2_STEP_WRITE(INVERT_Z_STEP_PIN); #endif AXIS_INIT(z, Z, Z); #endif - #if defined(E0_STEP_PIN) && E0_STEP_PIN >= 0 + #if HAS_E0_STEP E_AXIS_INIT(0); #endif - #if defined(E1_STEP_PIN) && E1_STEP_PIN >= 0 + #if HAS_E1_STEP E_AXIS_INIT(1); #endif - #if defined(E2_STEP_PIN) && E2_STEP_PIN >= 0 + #if HAS_E2_STEP E_AXIS_INIT(2); #endif - #if defined(E3_STEP_PIN) && E3_STEP_PIN >= 0 + #if HAS_E3_STEP E_AXIS_INIT(3); #endif @@ -1084,13 +1127,7 @@ long st_get_position(uint8_t axis) { void finishAndDisableSteppers() { st_synchronize(); - disable_x(); - disable_y(); - disable_z(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); + disable_all_steppers(); } void quickStop() { @@ -1220,12 +1257,12 @@ void digipot_current(uint8_t driver, int current) { } void microstep_init() { - #if defined(E1_MS1_PIN) && E1_MS1_PIN >= 0 + #if HAS_MICROSTEPS_E1 pinMode(E1_MS1_PIN,OUTPUT); - pinMode(E1_MS2_PIN,OUTPUT); + pinMode(E1_MS2_PIN,OUTPUT); #endif - #if defined(X_MS1_PIN) && X_MS1_PIN >= 0 + #if HAS_MICROSTEPS pinMode(X_MS1_PIN,OUTPUT); pinMode(X_MS2_PIN,OUTPUT); pinMode(Y_MS1_PIN,OUTPUT); @@ -1246,7 +1283,7 @@ void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) { case 1: digitalWrite(Y_MS1_PIN, ms1); break; case 2: digitalWrite(Z_MS1_PIN, ms1); break; case 3: digitalWrite(E0_MS1_PIN, ms1); break; - #if defined(E1_MS1_PIN) && E1_MS1_PIN >= 0 + #if HAS_MICROSTEPS_E1 case 4: digitalWrite(E1_MS1_PIN, ms1); break; #endif } @@ -1285,7 +1322,7 @@ void microstep_readings() { SERIAL_PROTOCOLPGM("E0: "); SERIAL_PROTOCOL(digitalRead(E0_MS1_PIN)); SERIAL_PROTOCOLLN(digitalRead(E0_MS2_PIN)); - #if defined(E1_MS1_PIN) && E1_MS1_PIN >= 0 + #if HAS_MICROSTEPS_E1 SERIAL_PROTOCOLPGM("E1: "); SERIAL_PROTOCOL(digitalRead(E1_MS1_PIN)); SERIAL_PROTOCOLLN(digitalRead(E1_MS2_PIN)); diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index b59ff29df..28e1afb7c 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -1,5 +1,5 @@ /* - temperature.c - temperature control + temperature.cpp - temperature control Part of Marlin Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm @@ -16,18 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . - */ - -/* - This firmware is a mashup between Sprinter and grbl. - (https://github.com/kliment/Sprinter) - (https://github.com/simen/grbl/tree) - - It has preliminary support for Matthew Roberts advance algorithm - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html - - */ - +*/ #include "Marlin.h" #include "ultralcd.h" @@ -87,14 +76,14 @@ unsigned char soft_pwm_bed; #define HAS_HEATER_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0) #define HAS_BED_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_BED_PERIOD) && THERMAL_RUNAWAY_PROTECTION_BED_PERIOD > 0 && TEMP_SENSOR_BED != 0) #if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION - static bool thermal_runaway = false; - void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc); + enum TRState { TRReset, TRInactive, TRFirstHeating, TRStable, TRRunaway }; + void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc); #if HAS_HEATER_THERMAL_PROTECTION - static int thermal_runaway_state_machine[4]; // = {0,0,0,0}; + static TRState thermal_runaway_state_machine[4] = { TRReset, TRReset, TRReset, TRReset }; static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0}; #endif #if HAS_BED_THERMAL_PROTECTION - static int thermal_runaway_bed_state_machine; + static TRState thermal_runaway_bed_state_machine = TRReset; static unsigned long thermal_runaway_bed_timer; #endif #endif @@ -238,7 +227,7 @@ void PID_autotune(float temp, int extruder, int ncycles) soft_pwm[extruder] = bias = d = PID_MAX / 2; // PID Tuning loop - for(;;) { + for (;;) { unsigned long ms = millis(); @@ -609,7 +598,7 @@ void manage_heater() { // Loop through all extruders for (int e = 0; e < EXTRUDERS; e++) { - #if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0 + #if HAS_HEATER_THERMAL_PROTECTION thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_RUNAWAY_PROTECTION_PERIOD, THERMAL_RUNAWAY_PROTECTION_HYSTERESIS); #endif @@ -637,7 +626,7 @@ void manage_heater() { disable_heater(); _temp_error(0, PSTR(MSG_EXTRUDER_SWITCHED_OFF), PSTR(MSG_ERR_REDUNDANT_TEMP)); } - #endif //TEMP_SENSOR_1_AS_REDUNDANT + #endif // TEMP_SENSOR_1_AS_REDUNDANT } // Extruders Loop @@ -656,7 +645,7 @@ void manage_heater() { #if TEMP_SENSOR_BED != 0 #if HAS_BED_THERMAL_PROTECTION - thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, 9, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS); + thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS); #endif #ifdef PIDTEMPBED @@ -1014,69 +1003,72 @@ void setWatch() { } #if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION -void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) -{ -/* - SERIAL_ECHO_START; - SERIAL_ECHO("Thermal Thermal Runaway Running. Heater ID:"); - SERIAL_ECHO(heater_id); - SERIAL_ECHO(" ; State:"); - SERIAL_ECHO(*state); - SERIAL_ECHO(" ; Timer:"); - SERIAL_ECHO(*timer); - SERIAL_ECHO(" ; Temperature:"); - SERIAL_ECHO(temperature); - SERIAL_ECHO(" ; Target Temp:"); - SERIAL_ECHO(target_temperature); - SERIAL_ECHOLN(""); -*/ - if ((target_temperature == 0) || thermal_runaway) - { - *state = 0; - *timer = 0; - return; - } - switch (*state) - { - case 0: // "Heater Inactive" state - if (target_temperature > 0) *state = 1; - break; - case 1: // "First Heating" state - if (temperature >= target_temperature) *state = 2; - break; - case 2: // "Temperature Stable" state - { - unsigned long ms = millis(); - if (temperature >= (target_temperature - hysteresis_degc)) - { - *timer = ms; - } - else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000) - { + + void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) { + + static float tr_target_temperature[EXTRUDERS+1] = { 0.0 }; + + /* + SERIAL_ECHO_START; + SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: "); + if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHOPGM(heater_id); + SERIAL_ECHOPGM(" ; State:"); + SERIAL_ECHOPGM(*state); + SERIAL_ECHOPGM(" ; Timer:"); + SERIAL_ECHOPGM(*timer); + SERIAL_ECHOPGM(" ; Temperature:"); + SERIAL_ECHOPGM(temperature); + SERIAL_ECHOPGM(" ; Target Temp:"); + SERIAL_ECHOPGM(target_temperature); + SERIAL_EOL; + */ + + int heater_index = heater_id >= 0 ? heater_id : EXTRUDERS; + + // If the target temperature changes, restart + if (tr_target_temperature[heater_index] != target_temperature) + *state = TRReset; + + switch (*state) { + case TRReset: + *timer = 0; + *state = TRInactive; + break; + // Inactive state waits for a target temperature to be set + case TRInactive: + if (target_temperature > 0) { + tr_target_temperature[heater_index] = target_temperature; + *state = TRFirstHeating; + } + break; + // When first heating, wait for the temperature to be reached then go to Stable state + case TRFirstHeating: + if (temperature >= tr_target_temperature[heater_index]) *state = TRStable; + break; + // While the temperature is stable watch for a bad temperature + case TRStable: + // If the temperature is over the target (-hysteresis) restart the timer + if (temperature >= tr_target_temperature[heater_index] - hysteresis_degc) + *timer = millis(); + // If the timer goes too long without a reset, trigger shutdown + else if (millis() > *timer + period_seconds * 1000UL) + *state = TRRunaway; + break; + case TRRunaway: SERIAL_ERROR_START; SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP); - SERIAL_ERRORLN((int)heater_id); - LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); // translatable - thermal_runaway = true; - while(1) - { - disable_heater(); - disable_x(); - disable_y(); - disable_z(); - disable_e0(); - disable_e1(); - disable_e2(); - disable_e3(); + if (heater_id < 0) SERIAL_ERRORLNPGM("bed"); else SERIAL_ERRORLN(heater_id); + LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); + disable_heater(); + disable_all_steppers(); + for (;;) { manage_heater(); lcd_update(); } - } - } break; + } } -} -#endif //THERMAL_RUNAWAY_PROTECTION_PERIOD +#endif // HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION void disable_heater() { for (int i=0; i= #endif - if (current_temperature_raw[2] GE2 (maxttemp_raw[2]) max_temp_error(2); + if (current_temperature_raw[2] GE2 maxttemp_raw[2]) max_temp_error(2); if (minttemp_raw[2] GE2 current_temperature_raw[2]) min_temp_error(2); #endif // TEMP_SENSOR_2 diff --git a/Marlin/temperature.h b/Marlin/temperature.h index 79146a355..847c41b00 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -18,8 +18,8 @@ along with Grbl. If not, see . */ -#ifndef temperature_h -#define temperature_h +#ifndef TEMPERATURE_H +#define TEMPERATURE_H #include "Marlin.h" #include "planner.h" @@ -53,7 +53,7 @@ extern float current_temperature_bed; extern float redundant_temperature; #endif -#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1 +#if HAS_CONTROLLERFAN extern unsigned char soft_pwm_bed; #endif @@ -72,11 +72,11 @@ extern float current_temperature_bed; float unscalePID_d(float d); #endif + #ifdef PIDTEMPBED extern float bedKp,bedKi,bedKd; #endif - #ifdef BABYSTEPPING extern volatile int babystepsTodo[3]; #endif @@ -105,40 +105,27 @@ FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_tempe FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { return target_temperature[extruder] < current_temperature[extruder]; } FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; } -#define degHotend0() degHotend(0) -#define degTargetHotend0() degTargetHotend(0) -#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0) -#define isHeatingHotend0() isHeatingHotend(0) -#define isCoolingHotend0() isCoolingHotend(0) +#define HOTEND_ROUTINES(NR) \ + FORCE_INLINE float degHotend##NR() { return degHotend(NR); } \ + FORCE_INLINE float degTargetHotend##NR() { return degTargetHotend(NR); } \ + FORCE_INLINE void setTargetHotend##NR(const float c) { setTargetHotend(c, NR); } \ + FORCE_INLINE bool isHeatingHotend##NR() { return isHeatingHotend(NR); } \ + FORCE_INLINE bool isCoolingHotend##NR() { return isCoolingHotend(NR); } +HOTEND_ROUTINES(0); #if EXTRUDERS > 1 - #define degHotend1() degHotend(1) - #define degTargetHotend1() degTargetHotend(1) - #define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1) - #define isHeatingHotend1() isHeatingHotend(1) - #define isCoolingHotend1() isCoolingHotend(1) + HOTEND_ROUTINES(1); #else - #define setTargetHotend1(_celsius) do{}while(0) + #define setTargetHotend1(c) do{}while(0) #endif #if EXTRUDERS > 2 - #define degHotend2() degHotend(2) - #define degTargetHotend2() degTargetHotend(2) - #define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2) - #define isHeatingHotend2() isHeatingHotend(2) - #define isCoolingHotend2() isCoolingHotend(2) + HOTEND_ROUTINES(2); #else - #define setTargetHotend2(_celsius) do{}while(0) + #define setTargetHotend2(c) do{}while(0) #endif #if EXTRUDERS > 3 - #define degHotend3() degHotend(3) - #define degTargetHotend3() degTargetHotend(3) - #define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3) - #define isHeatingHotend3() isHeatingHotend(3) - #define isCoolingHotend3() isCoolingHotend(3) + HOTEND_ROUTINES(3); #else - #define setTargetHotend3(_celsius) do{}while(0) -#endif -#if EXTRUDERS > 4 - #error Invalid number of extruders + #define setTargetHotend3(c) do{}while(0) #endif int getHeaterPower(int heater); @@ -161,5 +148,4 @@ FORCE_INLINE void autotempShutdown() { #endif } - -#endif +#endif // TEMPERATURE_H diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index e6da28e0f..42a957dca 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -262,8 +262,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool } /* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */ -static void lcd_status_screen() -{ +static void lcd_status_screen() { encoderRateMultiplierEnabled = false; #ifdef LCD_PROGRESS_BAR @@ -296,15 +295,7 @@ static void lcd_status_screen() #endif #endif //LCD_PROGRESS_BAR - if (lcd_status_update_delay) - lcd_status_update_delay--; - else - lcdDrawUpdate = 1; - - if (lcdDrawUpdate) { lcd_implementation_status_screen(); - lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ - } #ifdef ULTIPANEL @@ -1298,7 +1289,7 @@ void lcd_update() { } } #endif//CARDINSERTED - + uint32_t ms = millis(); if (ms > lcd_next_update_millis) { @@ -1349,27 +1340,36 @@ void lcd_update() { } // encoderRateMultiplierEnabled #endif //ENCODER_RATE_MULTIPLIER - lcdDrawUpdate = 1; encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP; encoderDiff = 0; } timeoutToStatus = ms + LCD_TIMEOUT_TO_STATUS; + lcdDrawUpdate = 1; } - #endif //ULTIPANEL + if (currentMenu == lcd_status_screen) { + if (!lcd_status_update_delay) { + lcdDrawUpdate = 1; + lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ + } + else { + lcd_status_update_delay--; + } + } #ifdef DOGLCD // Changes due to different driver architecture of the DOGM display - blink++; // Variable for fan animation and alive dot - u8g.firstPage(); - do { - lcd_setFont(FONT_MENU); - u8g.setPrintPos(125, 0); - if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot - u8g.drawPixel(127, 63); // draw alive dot - u8g.setColorIndex(1); // black on white - (*currentMenu)(); - if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next() - } while( u8g.nextPage() ); + if (lcdDrawUpdate) { + blink++; // Variable for fan animation and alive dot + u8g.firstPage(); + do { + lcd_setFont(FONT_MENU); + u8g.setPrintPos(125, 0); + if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot + u8g.drawPixel(127, 63); // draw alive dot + u8g.setColorIndex(1); // black on white + (*currentMenu)(); + } while( u8g.nextPage() ); + } #else (*currentMenu)(); #endif @@ -1789,7 +1789,7 @@ char *ftostr52(const float &x) { return conv; } -#if defined(MANUAL_BED_LEVELING) +#ifdef MANUAL_BED_LEVELING static int _lcd_level_bed_position; static void _lcd_level_bed() { @@ -1849,8 +1849,7 @@ static void _lcd_level_bed_homing() lcd_goto_menu(_lcd_level_bed); } } -static void lcd_level_bed() -{ +static void lcd_level_bed() { axis_known_position[X_AXIS] = false; axis_known_position[Y_AXIS] = false; axis_known_position[Z_AXIS] = false; diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index a89c26206..fe4f59768 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -64,14 +64,14 @@ #define LCD_CLICKED (buttons&EN_C) #ifdef REPRAPWORLD_KEYPAD - #define EN_REPRAPWORLD_KEYPAD_F3 BIT(BLEN_REPRAPWORLD_KEYPAD_F3) - #define EN_REPRAPWORLD_KEYPAD_F2 BIT(BLEN_REPRAPWORLD_KEYPAD_F2) - #define EN_REPRAPWORLD_KEYPAD_F1 BIT(BLEN_REPRAPWORLD_KEYPAD_F1) - #define EN_REPRAPWORLD_KEYPAD_UP BIT(BLEN_REPRAPWORLD_KEYPAD_UP) - #define EN_REPRAPWORLD_KEYPAD_RIGHT BIT(BLEN_REPRAPWORLD_KEYPAD_RIGHT) - #define EN_REPRAPWORLD_KEYPAD_MIDDLE BIT(BLEN_REPRAPWORLD_KEYPAD_MIDDLE) - #define EN_REPRAPWORLD_KEYPAD_DOWN BIT(BLEN_REPRAPWORLD_KEYPAD_DOWN) - #define EN_REPRAPWORLD_KEYPAD_LEFT BIT(BLEN_REPRAPWORLD_KEYPAD_LEFT) + #define EN_REPRAPWORLD_KEYPAD_F3 (BIT(BLEN_REPRAPWORLD_KEYPAD_F3)) + #define EN_REPRAPWORLD_KEYPAD_F2 (BIT(BLEN_REPRAPWORLD_KEYPAD_F2)) + #define EN_REPRAPWORLD_KEYPAD_F1 (BIT(BLEN_REPRAPWORLD_KEYPAD_F1)) + #define EN_REPRAPWORLD_KEYPAD_UP (BIT(BLEN_REPRAPWORLD_KEYPAD_UP)) + #define EN_REPRAPWORLD_KEYPAD_RIGHT (BIT(BLEN_REPRAPWORLD_KEYPAD_RIGHT)) + #define EN_REPRAPWORLD_KEYPAD_MIDDLE (BIT(BLEN_REPRAPWORLD_KEYPAD_MIDDLE)) + #define EN_REPRAPWORLD_KEYPAD_DOWN (BIT(BLEN_REPRAPWORLD_KEYPAD_DOWN)) + #define EN_REPRAPWORLD_KEYPAD_LEFT (BIT(BLEN_REPRAPWORLD_KEYPAD_LEFT)) #define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1)) #define REPRAPWORLD_KEYPAD_MOVE_Z_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F2) diff --git a/Marlin/vector_3.cpp b/Marlin/vector_3.cpp index 243f0838f..9eb3465fb 100644 --- a/Marlin/vector_3.cpp +++ b/Marlin/vector_3.cpp @@ -125,9 +125,9 @@ void matrix_3x3::debug(const char title[]) { int count = 0; for(int i=0; i<3; i++) { for(int j=0; j<3; j++) { - if (matrix[count] >= 0.0) SERIAL_PROTOCOLPGM("+"); + if (matrix[count] >= 0.0) SERIAL_PROTOCOLCHAR('+'); SERIAL_PROTOCOL_F(matrix[count], 6); - SERIAL_PROTOCOLPGM(" "); + SERIAL_PROTOCOLCHAR(' '); count++; } SERIAL_EOL; diff --git a/README.md b/README.md index 2ecb9d8e8..d2ff347d6 100644 --- a/README.md +++ b/README.md @@ -18,8 +18,8 @@ ## Quick Information This is a firmware for reprap single-processor electronics setups. -It also works on the Ultimaker PCB. It supports printing from SD card+Folders, and look-ahead trajectory planning. -This firmware is a mashup between [Sprinter](https://github.com/kliment/Sprinter), [grbl](https://github.com/simen/grbl) and many original parts. +It also works on the Ultimaker PCB. It supports printing from SD card+Folders and look-ahead trajectory planning. +This firmware is a mashup between [Sprinter](https://github.com/kliment/Sprinter), [grbl](https://github.com/simen/grbl), and many original parts. ## Current Status: Bug Fixing @@ -31,18 +31,18 @@ We are actively looking for testers. So please try the current development versi ## Contact -__IRC:__ #marlin-firmware @freenode ([WebChat Client](https://webchat.freenode.net/?channels=marlin-firmware) +__Google Hangout:__ Hagnout ## Credits The current Marlin dev team consists of: - - Erik van der Zalm ([@ErikZalm](https://github.com/ErikZalm)) - - [@daid](https://github.com/daid) + - Scott Lahteine [@thinkyhead] + - Sprinters lead developers are Kliment and caru. -Grbls lead developer is Simen Svale Skogsrud. -Sonney Jeon (Chamnit) improved some parts of grbl +Grbl's lead developer is Simen Svale Skogsrud. +Sonney Jeon (Chamnit) improved some parts of grbl. A fork by bkubicek for the Ultimaker was merged. More features have been added by: