MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Sanity check parity with 2.0.x

Browse Source
This commit is contained in:
Scott Lahteine 2017-12-16 20:03:53 -06:00
parent 7378905053
commit f5fc851925
1 changed files with 43 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
Marlin/SanityCheck.h
View File

@ -26,6 +26,9 @@
* Test configuration values for errors at compile-time. * Test configuration values for errors at compile-time.
*/ */
#ifndef _SANITYCHECK_H_
#define _SANITYCHECK_H_
/** /**
* Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features. * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
*/ */
@ -254,7 +257,19 @@
/** /**
* Serial * Serial
*/ */
#if defined(USBCON) && ENABLED(SERIAL_XON_XOFF) #ifndef USBCON
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
#endif
#if RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
#error "RX_BUFFER_SIZE must be a power of 2 greater than 1."
#endif
#if TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
#error "TX_BUFFER_SIZE must be 0, a power of 2 greater than 1, and no greater than 256."
#endif
#elif ENABLED(SERIAL_XON_XOFF)
#error "SERIAL_XON_XOFF is not supported on USB-native AVR devices." #error "SERIAL_XON_XOFF is not supported on USB-native AVR devices."
#endif #endif
@ -355,9 +370,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
* Babystepping * Babystepping
*/ */
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
#if DISABLED(ULTRA_LCD) && DISABLED(I2C_POSITION_ENCODERS) #if ENABLED(SCARA)
#error "BABYSTEPPING requires an LCD controller."
#elif ENABLED(SCARA)
#error "BABYSTEPPING is not implemented for SCARA yet." #error "BABYSTEPPING is not implemented for SCARA yet."
#elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY) #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
#error "BABYSTEPPING only implemented for Z axis on deltabots." #error "BABYSTEPPING only implemented for Z axis on deltabots."
@ -595,7 +608,7 @@ static_assert(1 >= 0
#elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_SEGMENTED #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_SEGMENTED
#error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." #error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
#elif ENABLED(DELTA_AUTO_CALIBRATION) && !(HAS_BED_PROBE || ENABLED(ULTIPANEL)) #elif ENABLED(DELTA_AUTO_CALIBRATION) && !(HAS_BED_PROBE || ENABLED(ULTIPANEL))
#error "DELTA_AUTO_CALIBRATION requires either a probe or an LCD Controller." #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
#elif ABL_GRID #elif ABL_GRID
#if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0 #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers." #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
@ -989,10 +1002,11 @@ static_assert(1 >= 0
#error "TEMP_SENSOR_0 is required." #error "TEMP_SENSOR_0 is required."
#endif #endif
#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) // Pins are required for heaters
#if !HAS_HEATER_1 #if ENABLED(HEATER_0_USES_MAX6675) && !(defined(MAX6675_SS) && MAX6675_SS >= 0)
#error "HEATER_1_PIN not defined for this board." #error "MAX6675_SS (required for TEMP_SENSOR_0) not defined for this board."
#endif #elif (HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)) && !HAS_HEATER_1
#error "HEATER_1_PIN not defined for this board."
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
@ -1412,23 +1426,24 @@ static_assert(1 >= 0
/** /**
* Make sure HAVE_TMC2130 is warranted * Make sure HAVE_TMC2130 is warranted
*/ */
#if ENABLED(HAVE_TMC2130) && !( \ #if ENABLED(HAVE_TMC2130)
ENABLED( X_IS_TMC2130 ) \ #if !( ENABLED( X_IS_TMC2130 ) \
|| ENABLED( X2_IS_TMC2130 ) \ || ENABLED( X2_IS_TMC2130 ) \
|| ENABLED( Y_IS_TMC2130 ) \ || ENABLED( Y_IS_TMC2130 ) \
|| ENABLED( Y2_IS_TMC2130 ) \ || ENABLED( Y2_IS_TMC2130 ) \
|| ENABLED( Z_IS_TMC2130 ) \ || ENABLED( Z_IS_TMC2130 ) \
|| ENABLED( Z2_IS_TMC2130 ) \ || ENABLED( Z2_IS_TMC2130 ) \
|| ENABLED( E0_IS_TMC2130 ) \ || ENABLED( E0_IS_TMC2130 ) \
|| ENABLED( E1_IS_TMC2130 ) \ || ENABLED( E1_IS_TMC2130 ) \
|| ENABLED( E2_IS_TMC2130 ) \ || ENABLED( E2_IS_TMC2130 ) \
|| ENABLED( E3_IS_TMC2130 ) \ || ENABLED( E3_IS_TMC2130 ) \
|| ENABLED( E4_IS_TMC2130 ) ) || ENABLED( E4_IS_TMC2130 ) )
#error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set." #error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set."
#elif ENABLED(SENSORLESS_HOMING) && DISABLED(HAVE_TMC2130) #elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
#error "Enable HAVE_TMC2130 to use SENSORLESS_HOMING." #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
#elif defined(AUTOMATIC_CURRENT_CONTROL) #elif defined(AUTOMATIC_CURRENT_CONTROL)
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
#endif
#endif #endif
/** /**
@ -1581,3 +1596,5 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m
#endif #endif
#endif #endif
#endif #endif
#endif // _SANITYCHECK_H_