MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

G26: Add 'Repeat' Option

Browse Source 
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
This commit is contained in:
Brian 2017-05-10 15:51:44 -04:00
parent bbb2b86c34
commit f7a201b0d0
1 changed files with 52 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

88
Marlin/G26_Mesh_Validation_Tool.cpp
View File

@ -66,54 +66,58 @@
* the user can specify the X and Y position of interest with command parameters. This allows the user to * the user can specify the X and Y position of interest with command parameters. This allows the user to
* focus on a particular area of the Mesh where attention is needed. * focus on a particular area of the Mesh where attention is needed.
* *
* B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed. * B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed.
* *
* C Current When searching for Mesh Intersection points to draw, use the current nozzle location * C Current When searching for Mesh Intersection points to draw, use the current nozzle location
* as the base for any distance comparison. as the base for any distance comparison.
* *
* D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this * D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this
* command to see how well a Mesh as been adjusted to match a print surface. In order to do * command to see how well a Mesh as been adjusted to match a print surface. In order to do
* this the Unified Bed Leveling System is turned on by the G26 command. The D parameter * this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
* alters the command's normal behaviour and disables the Unified Bed Leveling System even if * alters the command's normal behaviour and disables the Unified Bed Leveling System even if
* it is on. * it is on.
* *
* H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed. * H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
* *
* F # Filament Used to specify the diameter of the filament being used. If not specified * F # Filament Used to specify the diameter of the filament being used. If not specified
* 1.75mm filament is assumed. If you are not getting acceptable results by using the * 1.75mm filament is assumed. If you are not getting acceptable results by using the
* 'correct' numbers, you can scale this number up or down a little bit to change the amount * 'correct' numbers, you can scale this number up or down a little bit to change the amount
* of filament that is being extruded during the printing of the various lines on the bed. * of filament that is being extruded during the printing of the various lines on the bed.
* *
* K Keep-On Keep the heaters turned on at the end of the command. * K Keep-On Keep the heaters turned on at the end of the command.
* *
* L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used. * L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used.
* *
* Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and * Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
* un-retraction is at 1.2mm These numbers will be scaled by the specified amount * un-retraction is at 1.2mm These numbers will be scaled by the specified amount
* *
* N # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed. * M # Random Randomize the order that the circles are drawn on the bed. The search for the closest
* 'n' can be used instead if your host program does not appreciate you using 'N'. * undrawn cicle is still done. But the distance to the location for each circle has a
* random number of the size specified added to it. Specifying R50 will give an interesting
* deviation from the normal behaviour on a 10 x 10 Mesh.
* N # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed.
* 'n' can be used instead if your host program does not appreciate you using 'N'.
* *
* O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This * O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This
* is over kill, but using this parameter will let you get the very first 'cicle' perfect * is over kill, but using this parameter will let you get the very first 'cicle' perfect
* so you have a trophy to peel off of the bed and hang up to show how perfectly you have your * so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
* Mesh calibrated. If not specified, a filament length of .3mm is assumed. * Mesh calibrated. If not specified, a filament length of .3mm is assumed.
* *
* P # Prime Prime the nozzle with specified length of filament. If this parameter is not * P # Prime Prime the nozzle with specified length of filament. If this parameter is not
* given, no prime action will take place. If the parameter specifies an amount, that much * given, no prime action will take place. If the parameter specifies an amount, that much
* will be purged before continuing. If no amount is specified the command will start * will be purged before continuing. If no amount is specified the command will start
* purging filament until the user provides an LCD Click and then it will continue with * purging filament until the user provides an LCD Click and then it will continue with
* printing the Mesh. You can carefully remove the spent filament with a needle nose * printing the Mesh. You can carefully remove the spent filament with a needle nose
* pliers while holding the LCD Click wheel in a depressed state. * pliers while holding the LCD Click wheel in a depressed state.
* *
* R # Random Randomize the order that the circles are drawn on the bed. The search for the closest * R # Repeat Prints the number of patterns given as a parameter, starting at the current location.
* undrawn cicle is still done. But the distance to the location for each circle has a * If a parameter isn't given, every point will be printed unless G26 is interrupted.
* random number of the size specified added to it. Specifying R50 will give an interesting * This works the same way that the UBL G29 P4 R parameter works.
* deviation from the normal behaviour on a 10 x 10 Mesh.
* *
* X # X coordinate Specify the starting location of the drawing activity. * X # X Coord. Specify the starting location of the drawing activity.
* *
* Y # Y coordinate Specify the starting location of the drawing activity. * Y # Y Coord. Specify the starting location of the drawing activity.
*/ */
// External references // External references
@ -176,6 +180,8 @@
static bool keep_heaters_on = false; static bool keep_heaters_on = false;
static int16_t g26_repeats;
/** /**
* G26: Mesh Validation Pattern generation. * G26: Mesh Validation Pattern generation.
* *
@ -359,7 +365,7 @@
//debug_current_and_destination(PSTR("Done with current circle.")); //debug_current_and_destination(PSTR("Done with current circle."));
} while (location.x_index >= 0 && location.y_index >= 0); } while (location.x_index >= 0 && location.y_index >= 0 && g26_repeats--);
LEAVE: LEAVE:
lcd_reset_alert_level(); lcd_reset_alert_level();
@ -722,11 +728,21 @@
} }
} }
if (code_seen('R')) { if (code_seen('M')) {
randomSeed(millis()); randomSeed(millis());
random_deviation = code_has_value() ? code_value_float() : 50.0; random_deviation = code_has_value() ? code_value_float() : 50.0;
} }
if (code_seen('R')) {
g26_repeats = code_has_value() ? code_value_int() - 1 : 999;
if (g26_repeats <= 0) {
SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be greater than 0.");
return UBL_ERR;
}
}
x_pos = current_position[X_AXIS]; x_pos = current_position[X_AXIS];
y_pos = current_position[Y_AXIS]; y_pos = current_position[Y_AXIS];