suppress warnings

This commit is contained in:
esenapaj 2016-04-03 06:28:17 +09:00
parent cf9a171aa9
commit f9e1a0ee6c
7 changed files with 56 additions and 22 deletions

View File

@ -137,8 +137,10 @@ void gcode_M100() {
// other vital statistics that define the memory pool.
//
if (code_seen('F')) {
int max_addr = (int) __brkval;
int max_cnt = 0;
#if 0
int max_addr = (int) __brkval;
int max_cnt = 0;
#endif
int block_cnt = 0;
ptr = (unsigned char*) __brkval;
sp = top_of_stack();
@ -155,10 +157,12 @@ void gcode_M100() {
i += j;
block_cnt++;
}
if (j > max_cnt) { // We don't do anything with this information yet
max_cnt = j; // but we do know where the biggest free memory block is.
max_addr = (int) ptr + i;
}
#if 0
if (j > max_cnt) { // We don't do anything with this information yet
max_cnt = j; // but we do know where the biggest free memory block is.
max_addr = (int) ptr + i;
}
#endif
}
}
if (block_cnt > 1)

View File

@ -1638,6 +1638,9 @@ static void setup_for_endstop_move() {
}
static void stow_z_probe(bool doRaise = true) {
#if !(HAS_SERVO_ENDSTOPS && (Z_RAISE_AFTER_PROBING > 0))
UNUSED(doRaise);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
print_xyz("stow_z_probe > current_position", current_position);
@ -1912,11 +1915,13 @@ static void setup_for_endstop_move() {
#endif // AUTO_BED_LEVELING_FEATURE
static void axis_unhomed_error() {
LCD_MESSAGEPGM(MSG_YX_UNHOMED);
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_YX_UNHOMED);
}
#if ENABLED(Z_PROBE_SLED) || ENABLED(Z_SAFE_HOMING) || ENABLED(AUTO_BED_LEVELING_FEATURE)
static void axis_unhomed_error() {
LCD_MESSAGEPGM(MSG_YX_UNHOMED);
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_YX_UNHOMED);
}
#endif
#if ENABLED(Z_PROBE_SLED)
@ -2300,6 +2305,8 @@ void unknown_command_error() {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_INPUT);
break;
default:
break;
}
}
next_busy_signal_ms = ms + 10000UL; // "busy: ..." message every 10s
@ -3820,7 +3827,7 @@ inline void gcode_M42() {
}
double sum = 0.0, mean = 0.0, sigma = 0.0, sample_set[50];
uint8_t verbose_level = 1, n_samples = 10, n_legs = 0, schizoid_flag = 0;
int8_t verbose_level = 1, n_samples = 10, n_legs = 0, schizoid_flag = 0;
if (code_seen('V')) {
verbose_level = code_value_short();
@ -5476,7 +5483,7 @@ inline void gcode_M400() { st_synchronize(); }
if (delay_index2 == -1) { //initialize the ring buffer if it has not been done since startup
int temp_ratio = widthFil_to_size_ratio();
for (delay_index1 = 0; delay_index1 < COUNT(measurement_delay); ++delay_index1)
for (delay_index1 = 0; delay_index1 < (int)COUNT(measurement_delay); ++delay_index1)
measurement_delay[delay_index1] = temp_ratio - 100; //subtract 100 to scale within a signed byte
delay_index1 = delay_index2 = 0;
@ -5525,7 +5532,7 @@ inline void gcode_M410() { quickStop(); }
* M421: Set a single Mesh Bed Leveling Z coordinate
*/
inline void gcode_M421() {
float x, y, z;
float x = 0, y = 0, z = 0;
bool err = false, hasX, hasY, hasZ;
if ((hasX = code_seen('X'))) x = code_value();
if ((hasY = code_seen('Y'))) y = code_value();
@ -5688,7 +5695,10 @@ inline void gcode_M503() {
return;
}
float lastpos[NUM_AXIS], fr60 = feedrate / 60;
float lastpos[NUM_AXIS];
#if ENABLED(DELTA)
float fr60 = feedrate / 60;
#endif
for (int i = 0; i < NUM_AXIS; i++)
lastpos[i] = destination[i] = current_position[i];
@ -5745,7 +5755,9 @@ inline void gcode_M503() {
disable_e3();
delay(100);
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
millis_t next_tick = 0;
#if DISABLED(AUTO_FILAMENT_CHANGE)
millis_t next_tick = 0;
#endif
KEEPALIVE_STATE(PAUSED_FOR_USER);
while (!lcd_clicked()) {
#if DISABLED(AUTO_FILAMENT_CHANGE)

View File

@ -365,6 +365,7 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
#if DISABLED(SOFTWARE_SPI)
return setSckRate(sckRateID);
#else // SOFTWARE_SPI
UNUSED(sckRateID);
return true;
#endif // SOFTWARE_SPI

View File

@ -348,11 +348,11 @@ void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
char *dirname_start, *dirname_end;
if (name[0] == '/') {
dirname_start = &name[1];
while (dirname_start > 0) {
while (dirname_start != NULL) {
dirname_end = strchr(dirname_start, '/');
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start - name));
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end - name));
if (dirname_end > 0 && dirname_end > dirname_start) {
if (dirname_end != NULL && dirname_end > dirname_start) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;
@ -429,11 +429,11 @@ void CardReader::removeFile(char* name) {
char *dirname_start, *dirname_end;
if (name[0] == '/') {
dirname_start = strchr(name, '/') + 1;
while (dirname_start > 0) {
while (dirname_start != NULL) {
dirname_end = strchr(dirname_start, '/');
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start - name));
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end - name));
if (dirname_end > 0 && dirname_end > dirname_start) {
if (dirname_end != NULL && dirname_end > dirname_start) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;

View File

@ -83,7 +83,7 @@ extern float current_temperature_bed;
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
extern float Kp[EXTRUDERS], Ki[EXTRUDERS], Kd[EXTRUDERS], Kc[EXTRUDERS]; // one param per extruder
#define PID_PARAM(param,e) param[e] // use macro to point to array value
#define PID_PARAM(param, e) param[e] // use macro to point to array value
#else
extern float Kp, Ki, Kd, Kc; // one param per extruder - saves 20 or 36 bytes of ram (inc array pointer)
#define PID_PARAM(param, e) param // use macro to point directly to value

View File

@ -726,6 +726,8 @@ void _lcd_preheat(int endnum, const float temph, const float tempb, const int fa
if (temph > 0) setTargetHotend(temph, endnum);
#if TEMP_SENSOR_BED != 0
setTargetBed(tempb);
#else
UNUSED(tempb);
#endif
#if FAN_COUNT > 0
#if FAN_COUNT > 1
@ -733,6 +735,8 @@ void _lcd_preheat(int endnum, const float temph, const float tempb, const int fa
#else
fanSpeeds[0] = fan;
#endif
#else
UNUSED(fan);
#endif
lcd_return_to_status();
}
@ -1146,10 +1150,16 @@ static void lcd_control_menu() {
// Helpers for editing PID Ki & Kd values
// grab the PID value out of the temp variable; scale it; then update the PID driver
void copy_and_scalePID_i(int e) {
#if DISABLED(PID_PARAMS_PER_EXTRUDER)
UNUSED(e);
#endif
PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
updatePID();
}
void copy_and_scalePID_d(int e) {
#if DISABLED(PID_PARAMS_PER_EXTRUDER)
UNUSED(e);
#endif
PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
updatePID();
}
@ -1720,18 +1730,20 @@ static void menu_action_function(menuFunc_t func) { (*func)(); }
#if ENABLED(SDSUPPORT)
static void menu_action_sdfile(const char* filename, char* longFilename) {
UNUSED(longFilename);
card.openAndPrintFile(filename);
lcd_return_to_status();
}
static void menu_action_sddirectory(const char* filename, char* longFilename) {
UNUSED(longFilename);
card.chdir(filename);
encoderPosition = 0;
}
#endif //SDSUPPORT
static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) { *ptr = !(*ptr); }
static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) {UNUSED(pstr); *ptr = !(*ptr); }
static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callback) {
menu_action_setting_edit_bool(pstr, ptr);
(*callback)();
@ -2031,6 +2043,10 @@ void lcd_ignore_click(bool b) {
}
void lcd_finishstatus(bool persist=false) {
#if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
UNUSED(persist);
#endif
#if ENABLED(LCD_PROGRESS_BAR)
progress_bar_ms = millis();
#if PROGRESS_MSG_EXPIRE > 0

View File

@ -873,6 +873,7 @@ void lcd_implementation_drawedit(const char* pstr, const char* value) {
#if ENABLED(SDSUPPORT)
static void lcd_implementation_drawmenu_sd(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename, uint8_t concat, char post_char) {
UNUSED(pstr);
char c;
uint8_t n = LCD_WIDTH - concat;
lcd.setCursor(0, row);