Commit Graph

2268 Commits

Author SHA1 Message Date
domonoky
15b73386b5 Add pin definitions for the Boards BAM&DICE + BAM&DICE Due 2015-02-19 11:53:31 +01:00
Scott Lahteine
08c236059e Merge pull request #1505 from thinkyhead/issue_1499
Bed leveling probe behavior issue?
2015-02-19 01:24:17 -08:00
Scott Lahteine
ab419795b3 Merge pull request #1511 from MagoKimbra/Reset_Alert_message_M600
Reset Alert message when finish M600 command
2015-02-19 01:19:56 -08:00
MagoKimbra
159196d1e9 Reset Alert message when finish M600 command 2015-02-18 21:33:38 +01:00
daid
266ff227cf Merge pull request #1510 from docdawning/Development
Trivial spelling correction
2015-02-17 20:59:32 +01:00
DocDawning
dfd4e74a5c Trivial spelling correction 2015-02-17 12:37:05 -07:00
AnHardt
6cdcd6c6d1 Fix iss#1492
Introduced lcd_strlen() and lcd_strlen_P().
Replaced the old functions where necessary.
Reworked language_ru.h.

Speeded up test for zero length string in cardreader.cpp
2015-02-16 13:53:58 +01:00
Scott Lahteine
63a5ff7ab9 Merge pull request #1489 from tommil/Development
Updated Finnish language file
2015-02-15 23:02:11 -08:00
Scott Lahteine
efb0491d40 Merge branch 'Development' into issue_1499
Merging latest upstream changes
2015-02-15 22:59:07 -08:00
Scott Lahteine
961998cf91 Merge pull request #1496 from thinkyhead/issue_1493
Megatronics 3 servo pins
2015-02-15 22:00:14 -08:00
Scott Lahteine
59e92a2db4 Merge pull request #1506 from thinkyhead/issue_1504
Issue #1504 – K8200 Z_ENABLE_PIN
2015-02-15 21:59:30 -08:00
Scott Lahteine
b71322e793 Issue #1504 – K8200 Z_ENABLE_PIN
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
2015-02-15 21:56:23 -08:00
Scott Lahteine
978d114c73 Bed leveling probe behavior issue?
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
2015-02-15 20:51:27 -08:00
Scott Lahteine
7c6236761a Merge branch 'Development' into issue_1493
Merging latest upstream changes
2015-02-15 20:45:35 -08:00
MarcelMo
d28f5b9e82 Support for simple customisable AutoZProbing area
When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size).
Not much code, but very useful.
Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling.
I used int for values... might be wrong...
I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits)
2015-02-15 15:58:29 +01:00
Tommi Lamberg
3e6ae25481 Merge branch 'Development' of https://github.com/tommil/Marlin into Development 2015-02-15 12:21:57 +02:00
Tommi Lamberg
513ff94b89 Merge remote-tracking branch 'upstream/Development' into Development 2015-02-15 12:21:45 +02:00
Tommi Lamberg
07a9165ca2 Merge remote-tracking branch 'upstream/Development' into Development 2015-02-13 21:09:52 +02:00
alexborro
afc737ca0c Fix CoreXY Homing Routine.
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
2015-02-13 14:38:05 -02:00
Scott Lahteine
7866fa161f Merge pull request #1476 from Natealus/Development
Compiling errors with 4 Extruders defined and Viki 2 Implementation
2015-02-12 16:56:55 -08:00
Scott Lahteine
8cfdd3e8a4 Merge pull request #1423 from MoonCactus/Development
Multi-line G-code commands
2015-02-12 16:29:30 -08:00
Natealus
ea9e49b20d ARRAY_BY_EXTRUDERS 4th hotend PID parameters 2015-02-12 00:56:47 -07:00
Scott Lahteine
d0ad8a978c Megatronics 3 servo pins
- Naive implementation, assuming the data sheet pin numbers correspond
to Arduino pin numbers.
2015-02-11 23:46:27 -08:00
Tommi Lamberg
622a531d9c Fixed error in translation 2015-02-11 08:50:48 +02:00
Tommi Lamberg
290ab42d22 Updated Finnish translations 2015-02-11 08:37:07 +02:00
Jérémie FRANCOIS
22a7985445 reverted to upstream 2015-02-11 07:12:55 +01:00
Jérémie FRANCOIS
b3bda57ca2 reverted to upstream 2015-02-11 07:12:02 +01:00
Jérémie FRANCOIS
9d75a56b56 Merge remote-tracking branch 'upstream/Development' into Development
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
2015-02-11 06:38:36 +01:00
Tommi Lamberg
0a59fee763 Merge remote-tracking branch 'upstream/Development' into Development 2015-02-11 06:53:43 +02:00
Scott Lahteine
d75cd69de4 Merge pull request #1488 from Wurstnase/Development
Bedleveling: X and Y must be Integers not Float!
2015-02-10 16:02:55 -08:00
Scott Lahteine
eb5889b3da Merge pull request #1479 from AnHardt/en_first
#include "language_en.h" before the national language in language.h
2015-02-10 15:33:45 -08:00
Tommi Lamberg
a4f939cc27 Updated Finnish language file 2015-02-10 10:48:33 +02:00
Wurstnase
4546c92f5b X and Y must be Integers not Float!
https://github.com/Wurstnase/Marlin/blob/Development/Marlin/Configuration.h#L427
2015-02-10 09:00:48 +01:00
Scott Lahteine
32d4dd073f Merge pull request #1487 from AnHardt/iss1485
Fix for #1485
2015-02-09 21:41:07 -08:00
Scott Lahteine
f92b0dc6c7 Merge pull request #1486 from Souko/patch-1
Update ultralcd_st7920_u8glib_rrd.h
2015-02-09 21:32:54 -08:00
AnHardt
c246026bda Sorry. 2015-02-10 00:23:39 +01:00
AnHardt
07e488cfae Fix for #1485 2015-02-10 00:13:46 +01:00
Souko
e7ecf14d0c Update ultralcd_st7920_u8glib_rrd.h
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
2015-02-09 21:46:06 +01:00
Scott Lahteine
8be25389f2 Merge pull request #1477 from AnHardt/languagetoconfig
Make display language configurable in Configuration.h
2015-02-09 05:36:57 -08:00
Natealus
f4b0a40abb Additional fixes to temperature.cpp and found another missing line
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
2015-02-08 15:43:58 -07:00
AnHardt
3aac2df057 Now the oter way around.
Include of language_en.h now behind national language.

All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
2015-02-08 20:41:20 +01:00
AnHardt
488633bf44 #include "language_en.h" before the national language in language.h
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.

- May throw some additional warnings about redefinition during compile.
2015-02-08 14:26:24 +01:00
AnHardt
8e92729141 Make display language configurable in Configuration.h 2015-02-08 13:45:22 +01:00
Natealus
38a500d05c Viki 2 Implementation
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.

I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
2015-02-08 03:14:59 -07:00
Natealus
697ee2dc50 Compiling errors with 4 Extruders defined
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
2015-02-08 01:05:05 -07:00
Jérémie FRANCOIS
85e5aa4011 Generalized enqueue_commands_P, and moved them to Marlin_main as they should 2015-02-07 23:24:20 +01:00
Scott Lahteine
c093ea36e6 Merge pull request #1472 from thinkyhead/issue_1471_fix
Fan speed and 4th extruder on graphical LCD
2015-02-07 03:03:04 -08:00
Scott Lahteine
aa67b38a44 Fan speed and 4th extruder on graphical LCD
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
2015-02-07 02:44:35 -08:00
Scott Lahteine
1a3c7d91f1 Merge pull request #1470 from thinkyhead/fix_eeprom_typo
Fix bad typo in ConfigurationStore.cpp
2015-02-06 14:44:28 -08:00
Scott Lahteine
72856166a9 Fix bad typo in ConfigurationStore.cpp 2015-02-06 14:43:58 -08:00