Commit Graph

1889 Commits

Author SHA1 Message Date
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a Shut down heaters during BL-Touch probe event
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users.   This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.

Because this code is messing with the heaters, it is written in a
paranoid manner.  It only turns the heaters back on if everything is
EXACTLY as it expects things to be.  The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.

This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
Scott Lahteine
5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Scott Lahteine
a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a Fix up XYZ_CONSTS_FROM_CONFIG macro 2017-04-24 14:05:11 -05:00
Brian
f41fb2b635 Numerous UBL-related changes:
* relocated ubl state to config. store:
 * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
 * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
 * removed pre_initialized state, saving 64 bytes of SRAM;
 * removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Scott Lahteine
830851df13 Spend some SRAM to optimize bilinear leveling 2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960 bed_level_grid => z_values (also *_virt array) 2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3 Add a method to refresh bilinear bed level after a change 2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5 Fix a pair of compiler complaints 2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
Scott Lahteine
ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
Scott Lahteine
5eb2b1a790 Clear up G29 compiler warnings 2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0 Apply const, spacing to Marlin_main.cpp 2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1 Cleanup of pins testing code 2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c Cleanup after some direct commits
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
de569e3d4e Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
eb2d073dae Add M905 R for setting the E/D ratio directly 2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84 Use code_value_linear_units for known-linear axes 2017-04-17 16:39:36 -05:00
Roxy-3D
5e9726530f Setup to find data corruption and general clean up
This data corruption problem is very difficult.  Just changing the code
a little bit changes whether the problem even happens and what is
affected.  I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.

Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected.   M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
037c964d26 Reverse bools on prepare_move sub-functions 2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806 Extra logging of Dual X modes 2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92 Cleanup, extend TMC2130 implementation 2017-04-14 23:00:00 -05:00
Scott Lahteine
24882adfbf Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02 fix 1 bug, add error messages
===============================================

make changes requested by reviewers

===============================================

add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873 Implement delta auto-calibration and delta_height 2017-04-14 19:46:31 -05:00
Scott Lahteine
81ffd98dd9 Allow faux leveling 2017-04-14 19:06:06 -05:00
Scott Lahteine
0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0 Patch to init W with RGBW_LED 2017-04-14 16:55:23 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916 Movement/adjustment should be reverse of probe offset change 2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Scott Lahteine
4022b971db Merge pull request #6315 from thinkyhead/rc_unify_M421
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
5e4f4d387f Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651 Unify M421 2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31 Merge pull request #6240 from thinkyhead/rebuild_rgb_led
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c theTarget => target_temp 2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade Add HAS_RESUME_CONTINUE shorthand macro 2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37 2 is DXC_DUPLICATION_MODE 2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54 Use multiply for delta probe constraint 2017-04-11 12:15:40 -05:00
Scott Lahteine
68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00