MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,690 Commits 1 Branch 0 Tags 96 MiB
2839c56f5a
Commit Graph

4629 Commits

Author SHA1 Message Date
Scott Lahteine
d4134e6901 Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone 2016-06-22 17:51:32 -07:00
Scott Lahteine
7b2fadd598 Apply some fixes from Andreas 
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
 2016-06-22 17:35:59 -07:00
Scott Lahteine
bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine
2640d13a9f Simplify initial raise in M48 2016-06-22 16:53:04 -07:00
Scott Lahteine
3763d45656 Return Z position in run_z_probe 2016-06-22 16:52:32 -07:00
Scott Lahteine
1f48b5c30f Pass a raise to probe_pt, not a Z position 2016-06-22 16:40:21 -07:00
Scott Lahteine
6fdd5ba246 Save and restore feedrate in more places 2016-06-22 16:40:20 -07:00
Scott Lahteine
fe173c2bc6 Generalized probe raise, use for after probing 2016-06-22 14:44:30 -07:00
Scott Lahteine
7da3080761 Simpler cleanup in G28 / G29 2016-06-22 14:44:30 -07:00
Scott Lahteine
15229d988b Fix compile error for bed matrix in M48 2016-06-22 14:04:46 -07:00
Scott Lahteine
c01352cbd5 Add a dependency for z servo macros 2016-06-22 14:04:23 -07:00
Scott Lahteine
c3794bd695 Add HAS_PROBING_PROCEDURE conditional 2016-06-22 14:03:22 -07:00
Scott Lahteine
42ce60c5cc Make sure NUM_SERVOS is set for Z servo endstop 2016-06-22 14:01:19 -07:00
Scott Lahteine
b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 2016-06-22 14:00:44 -07:00
Scott Lahteine
bb9c67b4b5 Tweak some feedrate vars 2016-06-22 03:27:31 -07:00
Scott Lahteine
5158bd6e93 Screen out G29 E for sled and allen key, allow single probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
ccae92588d Cleanup debug in G28 and G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
b4a9d2366c Use a macro for kinematic sync_plan_position 2016-06-22 03:20:33 -07:00
Scott Lahteine
bfccf26294 Use sync_plan_position_delta where needed 2016-06-22 03:20:33 -07:00
Scott Lahteine
a6b8c67df4 Move probe deploy after setup call in G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
e69916d1bd Split up endstop_move functions 2016-06-22 03:20:33 -07:00
Scott Lahteine
0e18a4897b Simpler handling of sled/allen-key in probe_pt 2016-06-22 03:20:33 -07:00
Scott Lahteine
1a92e2ef18 Comment on run_z_probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
68e0e5855e For all probes, at the end of G29 simply raise and stow 2016-06-22 03:20:33 -07:00
Scott Lahteine
c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 2016-06-22 03:20:33 -07:00
Scott Lahteine
9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 2016-06-22 03:20:33 -07:00
Scott Lahteine
07298ac992 Initialize current_position to home_offset on boot 2016-06-22 03:20:33 -07:00
Scott Lahteine
d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 2016-06-22 02:23:50 -07:00
Scott Lahteine
117db77c55 make motor_current_setting static and constexpr 2016-06-21 19:50:08 -07:00
João Brázio
19fb04d761 Update bq Hephestos 2 config 2016-06-21 18:15:51 -07:00
Scott Lahteine
b0e47608e6 Merge pull request #4108 from esenapaj/Fix-for-PR-#4093 
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
 2016-06-21 18:12:08 -07:00
Scott Lahteine
c84732e605 Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h 
Cosmetic changes and small fix for thermistortables.h
 2016-06-21 18:05:32 -07:00
Scott Lahteine
cdc661ea5e Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files 
Small cosmetic changes for language files
 2016-06-21 18:04:12 -07:00
Scott Lahteine
c8186e9423 Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes 
Enclose #error string by double-quotes
 2016-06-21 18:03:30 -07:00
Scott Lahteine
40cd20a236 Fix comments on EXPERIMENTAL_I2CBUS 2016-06-21 17:58:44 -07:00
esenapaj
385945ca31 Cosmetic changes and small fix for thermistortables.h 
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
 2016-06-21 21:19:47 +09:00
esenapaj
fac58f0291 Cosmetic changes for language files 2016-06-21 21:13:25 +09:00
esenapaj
14b661b9e5 Enclose #error string by double-quotes 2016-06-21 21:06:14 +09:00
esenapaj
d583ea852d Standardize format description of Panel 2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49 Move code block of probe to appropriate position 2016-06-21 20:36:46 +09:00
esenapaj
740fb2ce39 Adjust spacing 2016-06-21 19:37:45 +09:00
esenapaj
f77f3ffa70 Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX 2016-06-21 19:33:45 +09:00
Scott Lahteine
19fe93a5a9 Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST 2016-06-21 03:10:46 -07:00
Scott Lahteine
71a7408012 Merge pull request #4106 from thinkyhead/rc_temp_compile_err 
Fix compile error with watch_bed_next_ms
 2016-06-21 02:48:46 -07:00
Scott Lahteine
dcb8ec32ee Fix compile error with watch_bed_next_ms 2016-06-21 02:13:41 -07:00
Scott Lahteine
3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08 Move run_z_probe to earlier block 2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af Move raise_z_after_probing into earlier block 2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516 Always disable probe at the end of G29 2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470 Comment on setup_for_endstop_move 2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e Clear up ordering in G30 2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11 Make clean_up function available for probes 2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a Make run_z_probe available for any bed probe 2016-06-20 16:02:36 -07:00
Scott Lahteine
f6b09cf465 Always use deploy/stow for dock_sled 2016-06-20 15:51:01 -07:00
Scott Lahteine
3b457c2dd3 Use deploy/stow with FIX_MOUNTED_PROBE too 2016-06-20 15:25:01 -07:00
Scott Lahteine
7e9d4a68d4 Always raise Z (if needed) for servo deploy/stow 2016-06-19 20:17:13 -07:00
Scott Lahteine
9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup 
FIL_RUNOUT_INVERTING false by default
 2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl 
Make Z Probe options independent of ABL
 2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928 FILRUNOUT => FIL_RUNOUT 2016-06-19 19:25:26 -07:00
Scott Lahteine
dfbf8b3c2c FIL_RUNOUT_INVERTING false by default 2016-06-19 19:25:26 -07:00
Scott Lahteine
7b5cd314a5 Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup 
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
 2016-06-19 18:48:18 -07:00
Scott Lahteine
de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820 Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN 2016-06-19 18:13:33 -07:00
Scott Lahteine
f8c278ce4d Cartesio UI display option in all configs 2016-06-19 17:39:46 -07:00
Scott Lahteine
400e13d136 Output a message for SD read errors 2016-06-19 17:14:56 -07:00
Roxy-3D
96b8bcca84 Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks 
Cleanup of M48
 2016-06-18 22:21:16 -05:00
Scott Lahteine
b7e3c1bbc4 Tweak M48 output conditions 2016-06-18 16:17:53 -07:00
Scott Lahteine
1dad912b03 Adjust M48 raise / move handling 2016-06-18 15:38:24 -07:00
Scott Lahteine
46d3ef2223 Simplify sample_set probe_pt call in M48 2016-06-18 15:38:23 -07:00
Scott Lahteine
a647b05f82 Shrink some debug code in G28 2016-06-18 15:38:23 -07:00
Scott Lahteine
4edf813bde Just-in-time declaration style in M48 2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya
c475291e19 Fix M851 
Minor change missing in the process of standardize the gcode M851
 2016-06-18 15:19:07 -07:00
Scott Lahteine
e35583888c Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065 
Follow-up the PR #4065 (Remove support for XY servo endstops)
 2016-06-18 03:31:12 -07:00
Scott Lahteine
6dff52d920 Merge pull request #4078 from RicardoGA/Language_Spanish 
Update Spanish Language
 2016-06-18 03:28:46 -07:00
esenapaj
d55b94d606 Follow-up the PR #4065 (Remove support for XY servo endstops) 
・Update a forgotten Configuration.h of Cartesio
 2016-06-18 18:01:58 +09:00
Scott Lahteine
4e860babbc Allow setting xy_travel_speed for delta leveling also 2016-06-18 01:40:49 -07:00
Scott Lahteine
d36d4edd80 Tweak partial homing code 2016-06-18 01:16:50 -07:00
Scott Lahteine
d3a05de96e Save and restore feedrate in probe functions 2016-06-18 01:16:26 -07:00
Juan Ricardo Gomez Anaya
5991eb428f Update Spanish Language 
Spanish language update and also add missing messages
 2016-06-18 00:27:04 -05:00
Scott Lahteine
f33bd0bb10 Merge pull request #4077 from thinkyhead/rc_delete_old_macros 
Delete some obsolete Z servo macros
 2016-06-17 18:59:16 -07:00
Scott Lahteine
defcacc1a9 Delete some obsolete Z servo macros 2016-06-17 18:49:17 -07:00
Scott Lahteine
bbf5b486c3 Add an SD Card stop function, use in ultralcd 2016-06-17 18:27:14 -07:00
Scott Lahteine
3a150f07c2 Merge pull request #4073 from thinkyhead/rc_temp_mystery 
Minor tweaks to M109 / M190
 2016-06-17 17:49:50 -07:00
Scott Lahteine
bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe 
Make M851 standard with a bed probe
 2016-06-17 17:32:55 -07:00
Scott Lahteine
692a6e7c91 Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos 
Remove support for XY servo endstops
 2016-06-17 17:32:08 -07:00
Scott Lahteine
de177ba6c9 Minor tweaks to M109 / M190 2016-06-17 17:26:21 -07:00
Scott Lahteine
eab44b30d4 Safety and serial sections 2016-06-17 15:19:43 -07:00
Scott Lahteine
fc56a547d1 Rename movement section to motion 2016-06-17 15:19:43 -07:00
Scott Lahteine
a8b8796cd7 Define probe offsets when a probe exists 2016-06-17 15:19:42 -07:00
Scott Lahteine
1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine
f66a194159 Merge pull request #4062 from jbrazio/bugfix/compiler-warnings 
Fixes misc gcc warnings
 2016-06-17 14:23:28 -07:00
Scott Lahteine
1bed392c68 HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP 2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
João Brázio
d1e5dc6319
Fixes misc gcc warnings 2016-06-17 20:24:24 +01:00
esenapaj
c5eecb11b2 Follow-up the PR #4055 (Croatian language support) 
・Update a forgotten Configuration.h of Cartesio
 2016-06-17 21:20:15 +09:00
Scott Lahteine
d991a4c24a Merge pull request #4063 from thinkyhead/rc_remove_swp_files 
Delete mysterious .swp files from #3609
 2016-06-16 17:22:48 -07:00
Scott Lahteine
8d8cbef1de Merge pull request #4055 from thinkyhead/rc_croatian_language 
Croatian language support
 2016-06-16 17:22:25 -07:00
Scott Lahteine
ebbed2975e Delete mysterious .swp files from #3609 2016-06-16 16:42:03 -07:00
Scott Lahteine
02e5dad29a Include Croatian in language listings 2016-06-16 16:18:26 -07:00
Scott Lahteine
2015aad867 Tweak Croatian language file heading 2016-06-16 16:09:57 -07:00
Robert Marko
884bc63fbe Add Croatian language 2016-06-16 16:09:57 -07:00
Scott Lahteine
ef3bef6b9e Fix feedrate in gcode_T (max_feedrate is mm/s) 2016-06-16 16:03:14 -07:00
Scott Lahteine
4640974e1b Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053 
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
 2016-06-16 15:44:00 -07:00
esenapaj
106227540e Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support) 
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
 2016-06-16 19:22:31 +09:00
MagoKimbra
008d0637dd Fix gcode_T 2016-06-16 09:05:36 +02:00
edwilliams16
114d9db7d0 Show babysteps on the LCD in mm, not steps 2016-06-15 23:03:24 -07:00
Scott Lahteine
b410bf933b Merge pull request #4053 from thinkyhead/rc_cartesio_redo 
CNControls Cartesio UI Support
 2016-06-15 22:33:45 -07:00
Scott Lahteine
f639044c24 Merge pull request #3609 from jbrazio/feature/config-version 
Adds versioning for Configuration.h & Configuration_adv.h
 2016-06-15 22:09:47 -07:00
Scott Lahteine
4d2cb70152 Cartesio UI Support 2016-06-15 21:46:54 -07:00
Scott Lahteine
da90bbe0eb Merge pull request #4010 from thinkyhead/rc_toolchange_adjust 
Fixup position adjustment on toolchange
 2016-06-15 21:10:33 -07:00
Scott Lahteine
948c467e16 Merge pull request #4043 from AnHardt/save_delay 
Introduce save_delay()
 2016-06-15 21:06:43 -07:00
Scott Lahteine
4b93989a77 MBL Z adjustment on toolchange 2016-06-15 20:49:36 -07:00
Scott Lahteine
9c800d1f8c Position adjustment for bed leveling 2016-06-15 20:49:36 -07:00
Scott Lahteine
8c7babb70f Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023 
Fix for the PR #4023(Add macros to move servos)
 2016-06-15 20:39:46 -07:00
AnHardt
1219310622 Introduce save_delay() 
Introduce save_delay() for long delays what otherwise would cause
watchdog resets

Explizit lcd_set_custom_characters(false) at the end of bootscreen().
Else the charset is not proper set in case of LCD_PROGRESS_BAR.
 2016-06-15 18:11:55 +02:00
esenapaj
44f091a413 Fix for the PR #4023(Add macros to move servos) 
・Add missing ')'
 2016-06-15 22:34:55 +09:00
Alexander Leisentritt
c2b7ef1e7e "e" was renamed to "eindex" in a previous commit 2016-06-15 11:11:16 +02:00
Scott Lahteine
52ac2a62ee Merge pull request #4013 from thinkyhead/rc_toolchange_no_move 
Use "Tn S1" to change tools without moving
 2016-06-14 20:13:01 -07:00
Scott Lahteine
d2a00b74e3 Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T 
Use linear feedrate in gcode_T, not volumetric
 2016-06-14 20:10:08 -07:00
Scott Lahteine
0ad26d0de8 Merge pull request #4034 from AnHardt/custom-splash-screen 
Custom Splash Screen
 2016-06-14 18:51:39 -07:00
esenapaj
741cda0e47 Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE) 
・Update forgotten example configurations
 2016-06-15 00:10:15 +09:00
AnHardt
02b3d6b8d3 Custom Splash Screen 
Custom Splash Screen for full graphic displays.

Too complicated for the hitachis without knowing what exactly to display.

On top of #4032
Realisation of an idea from #3996
 2016-06-14 09:39:28 +02:00
Scott Lahteine
78a48d7e3c Merge pull request #4038 from thinkyhead/rc_fix_heater_off 
Fix broken DISABLE_HEATER macro
 2016-06-13 20:58:34 -07:00
Scott Lahteine
ee5be92206 Fix broken DISABLE_HEATER macro 2016-06-13 20:57:58 -07:00
Scott Lahteine
8d8180e028 Parse M905 args in Marlin_main.cpp 2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb patch LIN_ADVANCE to use code_value_float 2016-06-13 18:54:25 -07:00
Scott Lahteine
b708196770 Merge pull request #4032 from AnHardt/bootscreen-delay 
Show bootscreen later
 2016-06-13 18:27:05 -07:00
Scott Lahteine
587de1b6b6 Merge pull request #3676 from thinkyhead/rc_lin_advance_feature 
Advance extrusion algorithm – LIN_ADVANCE
 2016-06-13 18:04:58 -07:00
AnHardt
b4fedec0d1 Show bootscreen later 
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
 2016-06-14 01:59:50 +02:00
Silvio Didonna
08e2c5a6ea Added and translated some strings from language_en 2016-06-13 13:04:09 +02:00
Scott Lahteine
4d2119f83a _lcd_move => _lcd_move_xyz 2016-06-12 17:14:19 -07:00
Scott Lahteine
811967923a Fix manual_move to move the correct E stepper 2016-06-12 17:14:19 -07:00
Scott Lahteine
0d0b751498 Merge pull request #4023 from thinkyhead/rc_servo_macros 
Add macros to move servos
 2016-06-12 15:45:39 -07:00
Scott Lahteine
4fbe818163 Add macros to move servos 2016-06-12 15:38:30 -07:00
Scott Lahteine
b322ac4417 No need to check ULTIPANEL with DOGLCD 2016-06-11 16:50:06 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files 2016-06-12 00:36:15 +01:00
Scott Lahteine
c7eeb09e8f Merge pull request #4012 from Blue-Marlin/watchdoghealing 
Heal the watchdog
 2016-06-11 16:18:22 -07:00
Scott Lahteine
7fb69e24fb Use "Tn S1" to change tools without moving 2016-06-11 15:58:45 -07:00
Scott Lahteine
2f1bf8373b Merge pull request #4005 from thinkyhead/rc_prepare_move_destination 
Clarify names of prepare_move functions
 2016-06-11 15:51:58 -07:00
João Brázio
de8108648f
Added a versioning system to the config files 2016-06-11 23:48:10 +01:00
Blue-Marlin
efe719f898 Heal the watchgog 2016-06-12 00:34:31 +02:00
Scott Lahteine
b75e648f2c Clarify names of prepare_move functions 2016-06-11 15:32:49 -07:00
Scott Lahteine
ae9b09fe94 menu => screen 2016-06-11 14:53:39 -07:00
Scott Lahteine
45ea8749d3 Wrap all items depending on ULTIPANEL 2016-06-11 14:27:34 -07:00
Scott Lahteine
0e2bfd0769 Use linear feedrate in gcode_T, not volumetric 2016-06-10 18:27:01 -07:00
Scott Lahteine
bf8710d522 Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL 
manage_manual_move(); -> ULTIPANEL
 2016-06-10 17:17:57 -07:00
João Brázio
2c34ec2bac
Closes #3999: Compilation error with BEEPER_PIN -1 2016-06-11 00:12:49 +01:00
Blue-Marlin
378ff92e98 manage_manual_move(); -> ULTIPANEL 
Makr the call of   `manage_manual_move() ` depandent of `ULTIPANEL`
 2016-06-10 23:36:57 +02:00
Scott Lahteine
aad9c0ed8d Apply updated ISR timing code 2016-06-09 21:03:27 -07:00
Scott Lahteine
506d78b2f8 Run the advance_isr faster instead of doing multiple e-steps per interrupt 2016-06-09 21:03:27 -07:00
Scott Lahteine
6d62a4ffc8 Patch LIN_ADVANCE for style and forward-compatibility 2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734 Add LIN_ADVANCE 2016-06-09 21:03:27 -07:00
Scott Lahteine
e2d4919c01 Merge pull request #3991 from thinkyhead/rc_axis_units 
Rename some vars to clarify their relationship to acceleration
 2016-06-09 20:57:01 -07:00
Scott Lahteine
74060f17b7 Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer 
New feature: Non blocking tone queue
 2016-06-09 20:55:29 -07:00
Scott Lahteine
a82c755a35 Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings 2016-06-09 20:38:23 -07:00
João Brázio
5b5aa1572b Non-blocking buzzer 2016-06-09 20:20:05 -07:00
Scott Lahteine
72c6f2923f axis_steps_per_unit => axis_steps_per_mm 2016-06-09 17:04:51 -07:00
Scott Lahteine
446515ab79 Adjust spacing in block_t 2016-06-09 17:04:51 -07:00
Scott Lahteine
80ab749563 Rename acceleration locals for clarity 2016-06-09 17:04:51 -07:00
Scott Lahteine
3b08eb1eeb acceleration_st => acceleration_steps_per_s2 2016-06-09 17:04:51 -07:00
Scott Lahteine
cb4704e07a Rename some planner acceleration vars 
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
 2016-06-09 17:04:50 -07:00
Scott Lahteine
3c68be79dc Throw an error in PID_autotune for E < -1 2016-06-09 16:41:53 -07:00
Scott Lahteine
26f8f54c56 Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin 
Support inches, fahrenheit, and kelvin
 2016-06-08 20:10:33 -07:00
Scott Lahteine
f0a5b7f0bc Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration 
Use memset in mbl.reset to save 58 bytes
 2016-06-08 17:33:41 -07:00
Scott Lahteine
0b3142b45b Remove redundant declarations from M100 code 2016-06-08 17:09:34 -07:00
Scott Lahteine
4980ecc1f7 Smaller binary using inline gcode argument getters 2016-06-08 17:03:28 -07:00
Reid Rankin
16212432c9 G20/21 and M149 support, and code_value() refactor 
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
 2016-06-08 16:51:10 -07:00
Scott Lahteine
a569e89775 Merge pull request #3978 from thinkyhead/rc_planner_local_rename 
Rename some auto/locals to avoid name conflict
 2016-06-08 16:41:57 -07:00
Scott Lahteine
2d55862499 Use memset in mbl.reset to save 58 bytes 2016-06-08 16:05:18 -07:00
Scott Lahteine
b23f710034 Cleanup and naming for num-to-string functions 2016-06-08 13:12:27 -07:00
Scott Lahteine
3d56b9d127 Merge pull request #3979 from thinkyhead/mbl_cell 
MBL: cel => cell
 2016-06-07 19:12:46 -07:00
Scott Lahteine
cca047424d MBL: cel => cell 2016-06-07 19:10:39 -07:00
Scott Lahteine
49ecaf774d Rename some auto/locals to avoid name conflict 2016-06-07 15:38:45 -07:00
petrzjunior
9171a3d94f Update Czech language 2016/06/07 2016-06-07 19:25:15 +02:00
Scott Lahteine
5e6fdbb4cb Merge pull request #3963 from thinkyhead/rc_advance_steppers 
Use e_steps[EXTRUDERS] instead of e_steps[4]
 2016-06-05 02:46:06 -07:00
Scott Lahteine
47b5c55c29 Implement the delayed-move technique 2016-06-05 02:29:49 -07:00
Scott Lahteine
a3e25a0fca Instead of trying to move now, set a flag to move asap 2016-06-05 02:29:48 -07:00
Scott Lahteine
e2a8961635 Use e_steps[EXTRUDERS] instead of e_steps[4] 2016-06-05 01:44:53 -07:00
Scott Lahteine
43947072d5 Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2 
SINGLENOZZLE: EXTRUDERS versus HOTENDS
 2016-06-04 15:23:17 -07:00
Scott Lahteine
d7e4e8e9be Fix a typo in #3955 2016-06-04 02:09:58 -07:00
Scott Lahteine
c2362c1b3c Apply Marlin coding standards to MBL class 2016-06-03 21:43:32 -07:00
Edward Patel
c06de0f097 MBL: Added keeping MBL active when homing single axises for #3750 2016-06-03 21:42:29 -07:00
Scott Lahteine
f2fb66c00d With SINGLENOZZLE only set temperature for the active tool 2016-06-03 17:38:03 -07:00
Scott Lahteine
cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6 Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast 
Improved LCD contrast handling
 2016-06-03 17:08:41 -07:00
Scott Lahteine
9c87bf835c Merge pull request #3947 from thinkyhead/rc_statics_stepper 
Apply static to remaining Stepper methods
 2016-06-03 17:08:15 -07:00
Scott Lahteine
08871d4d6e Merge pull request #3950 from boelle/patch-3 
last of missing defines added
 2016-06-03 17:07:02 -07:00
Scott Lahteine
4e13cd3f35 Merge pull request #3955 from MagoKimbra/RCBugFix 
Fix M428 width DELTA & SCARA
 2016-06-03 15:50:37 -07:00
Scott Lahteine
2403a1cf9c Merge pull request #3952 from rafacouto/RCBugFix 
Galician language update.
 2016-06-03 15:46:03 -07:00
Scott Lahteine
8529122af1 Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow 
Raise the servo probe before stow outside ABL context
 2016-06-03 15:45:36 -07:00
MagoKimbra
f499be084a Fix M428 width DELTA & SCARA 2016-06-03 23:23:23 +02:00
Rafa Couto
5f8db3f574 Galician language update. 2016-06-03 18:24:53 +02:00
Bo Herrmannsen
8532bf4087 last of missing defines added 
need to check line 101-103
 2016-06-03 11:20:46 +02:00
Scott Lahteine
81384dfd36 Apply static to remaining stepper methods 2016-06-02 18:00:31 -07:00
Scott Lahteine
664b299a51 This fix is not DELTA compatible 2016-06-02 17:16:19 -07:00
Scott Lahteine
064efb20e0 Also call clear_command_queue for lcd_sdcard_stop 2016-06-02 17:16:19 -07:00
Scott Lahteine
6277395e1e set_current_position_from_planner() after stepper.quick_stop() 2016-06-02 17:16:19 -07:00
Scott Lahteine
381bc6f0b0 set_position => set_position_mm 2016-06-02 17:16:19 -07:00
Scott Lahteine
663d2463dc Merge pull request #3922 from thinkyhead/rc_statics_stepper 
Apply static to Stepper class
 2016-06-02 17:14:24 -07:00
Scott Lahteine
194185539d Merge pull request #3925 from thinkyhead/rc_statics_planner 
Apply static to Planner class
 2016-06-02 17:14:04 -07:00
Scott Lahteine
3fd9b331f0 Merge pull request #3924 from thinkyhead/rc_statics_temperature 
Apply static to Temperature class
 2016-06-02 17:13:17 -07:00
Scott Lahteine
db0fd021d0 Z raise options independent of ABL so G28 can use them 2016-06-02 16:56:49 -07:00
Scott Lahteine
9eecb4404b Make raise_z_after_probing null sometimes 2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994 Tweak #endif comment for ABL GRID 2016-06-02 16:56:49 -07:00
Scott Lahteine
b3a37b493d Patch G28 servo stow to use Conditionals, raise_z_after_probing 2016-06-02 16:56:49 -07:00
Scott Lahteine
5390c846a5 Positive conditions for HAS_LCD_CONTRAST 2016-06-02 16:17:34 -07:00
Scott Lahteine
efa7209acf Improved LCD contrast handling 
Based on MarlinFirmware/MarlinDev#200 from @eboston
 2016-06-02 16:17:34 -07:00
Scott Lahteine
b703fa9538 Add sanity check for SAV_3DGLCD display types 2016-06-02 15:21:17 -07:00
lrpirlet
3aefa04386 Raise the servo probe before stow outside ABL context 2016-06-01 21:53:45 +02:00
Scott Lahteine
9729e9c450 Combine ST7565 / U8GLIB_NHD_C12864 items in dogm 2016-06-01 01:42:14 -07:00
Scott Lahteine
f331763eca Merge pull request #3829 from thinkyhead/rc_fix_T_command 
Fix bad movement in gcode_T when switching extruders
 2016-05-31 19:36:18 -07:00
Scott Lahteine
67f816ff79 Merge pull request #3926 from thinkyhead/rc_statics_endstops 
Drop FORCE_INLINE from endstops.h
 2016-05-31 19:35:41 -07:00
Scott Lahteine
2bd4f33369 Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup 
Remove excess allen key probe examples from configs
 2016-05-31 19:18:21 -07:00
Scott Lahteine
d698c89971 Fix bad movement in gcode_T when switching 2016-05-31 19:14:33 -07:00
Scott Lahteine
1a01a44a94 Merge pull request #3936 from thinkyhead/rc_sav_mk1 
Support for SAV_3DGLCD OLED LCD controller
 2016-05-31 18:46:25 -07:00
Scott Lahteine
4770d7c346 Merge pull request #3933 from boelle/patch-2 
added defines present in en but not in da
 2016-05-31 18:42:38 -07:00
Scott Lahteine
c6c01eaaac Merge pull request #3888 from thinkyhead/rc_slower_max31855 
Slower SPI speed for MAX31855
 2016-05-31 18:40:38 -07:00
Scott Lahteine
a0b000d752 Support for SAV_3DGLCD OLED LCD controller 2016-05-31 14:41:16 -07:00
Scott Lahteine
bd97bbc52a Make HAS_LCD_CONTRAST a boolean flag 2016-05-31 11:47:02 -07:00
Scott Lahteine
bc77670673 Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac 
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
 2016-05-31 10:29:37 -07:00
Bo Herrmannsen
a1a8240606 added defines present in en but not in da 2016-05-31 14:57:52 +02:00
Bo Herrmannsen
5eb7a79d93 initial changes to DA 2016-05-31 14:24:33 +02:00
Scott Lahteine
55ef04a566 Need to call dac_init() in setup() for DAC_STEPPER_CURRENT 
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
 2016-05-30 23:35:06 -07:00
Scott Lahteine
43a71ef226 Remove excess allen key probe examples from configs 2016-05-30 18:26:53 -07:00
Scott Lahteine
1582ed43bf Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv 
MBL: Move border macros to Configuration_adv.h
 2016-05-30 18:15:50 -07:00
Scott Lahteine
ff53819856 Drop FORCE_INLINE in planner.h 
This change actually does increase the binary size by about 12 bytes,
but how does it affect performance?
 2016-05-30 17:18:28 -07:00
Scott Lahteine
e60224a943 Drop FORCE_INLINE from endstops.h 
`FORCE_INLINE` seems to have no effect with standard optimization.
 2016-05-30 17:08:56 -07:00
Scott Lahteine
85512e9372 Drop FORCE_INLINE from temperature.h 
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
 2016-05-30 17:06:50 -07:00
Scott Lahteine
78fb02a5ad Apply static to Temperature class 2016-05-30 16:50:51 -07:00
Scott Lahteine
c3df293fc6 Merge pull request #3923 from thinkyhead/rc_statics_endstops 
Apply static to Endstops class
 2016-05-30 16:48:23 -07:00
Scott Lahteine
02735fd500 Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak 
Tiny calc_timer speedup
 2016-05-30 16:47:03 -07:00
Scott Lahteine
668d50f68e Keep Stepper encapsulation, use static data and methods 2016-05-30 16:24:04 -07:00
Scott Lahteine
26f866b908 Apply static to Endstops class 2016-05-30 16:23:43 -07:00
Scott Lahteine
470d5ac09f Apply static to Planner class 2016-05-30 16:22:41 -07:00
Scott Lahteine
ecfdcf7250 Tiny calc_timer speedup 2016-05-30 16:17:02 -07:00
Edward Patel
06593833ff MBL: Move border macros to Configuration_adv.h 2016-05-30 20:50:16 +02:00
Scott Lahteine
ffe55c230d Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast 
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
 2016-05-30 11:20:14 -07:00
Scott Lahteine
d3efc96289 Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL 
- `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD`
- `MINIPANEL` conditionals are identical to `MAKRPANEL`
 2016-05-30 01:10:47 -07:00
Edward Patel
92a27c37b3 MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations 2016-05-30 09:50:11 +02:00
Scott Lahteine
3861f1e0da Merge pull request #3908 from jbrazio/bugfix/3826 
Closes #3826: SD printing will now pause and stop the print counter
 2016-05-30 00:08:57 -07:00
Scott Lahteine
8806c7bbcc Merge pull request #3903 from epatel/marlin/mbl_negative_xy 
MBL: Fix for negative x/y positions
 2016-05-29 22:07:35 -07:00
Scott Lahteine
dc22097b3a Fix some of array initializations 
- In `stepper.h` init `count_direction` array
- In `ultralcd.cpp` init `autotune_temp` array
 2016-05-29 20:55:13 -07:00
João Brázio
40e64b36de
Closes #3826: SD printing will now pause and stop the print counter 
The LCD menu items for SD printing pause/stop have been updated to control
also the print job timer. This commit also fixes a small output bug with
M78, the failed print counter was displaying the wrong value.
 2016-05-30 00:56:39 +01:00
Edward Patel
eb2746a34f MBL: Fix for negative x/y positions 2016-05-28 21:05:43 +02:00
Scott Lahteine
fe3122774a Merge pull request #3806 from thinkyhead/rc_coreyz_support 
Support for COREYZ. Fixes for COREXY, COREXZ
 2016-05-26 18:50:43 -07:00
Scott Lahteine
fad7680605 Slower SPI speed for MAX31855 2016-05-25 18:15:36 -07:00
Scott Lahteine
30f6b84561 Merge pull request #3812 from thinkyhead/rc_mbl_index_finders 
Two index finding functions for MBL
 2016-05-23 15:54:37 -07:00
Scott Lahteine
89e630b2fb Merge pull request #3808 from thinkyhead/rc_singlenozzle 
SINGLENOZZLE
 2016-05-23 15:52:19 -07:00
Scott Lahteine
827738a790 set_z parameters marked const 2016-05-23 14:25:43 -07:00
Scott Lahteine
9049f4084b EEPROM report uses G29 S3 2016-05-23 14:25:43 -07:00
Scott Lahteine
4955163959 Propose simpler probe index methods 2016-05-23 14:25:43 -07:00
Scott Lahteine
a1a5cb5393 Propose simpler cel index methods 2016-05-23 14:25:42 -07:00
Scott Lahteine
360adc6a3b Small reduction in M421 code 2016-05-23 14:25:42 -07:00
Scott Lahteine
a4ed988c60 Two index finding functions for MBL 2016-05-23 14:25:42 -07:00
Scott Lahteine
0e55c06f7d Rename CORE_AXIS_3 to NORMAL_AXIS 2016-05-23 13:58:40 -07:00
Scott Lahteine
5172d4ba40 COREYZ stepper, planner, endstop, babysteps 2016-05-23 13:58:40 -07:00
Scott Lahteine
6c7f4909b1 COREYZ Conditionals, SanityCheck for only a single kinematic 2016-05-23 13:58:40 -07:00
Scott Lahteine
95fee8ca81 Add option for CoreYZ kinematics 2016-05-23 13:58:40 -07:00
Scott Lahteine
678cbad76a Merge pull request #3819 from jbrazio/bugfix/followup-3813 
Followup for #3813
 2016-05-23 13:56:11 -07:00
AnHardt
bb66ffb2ae Correct hardware endstops default 
All credits to RicardoGA
 2016-05-23 10:54:22 +02:00
João Brázio
75221fa673
Followup for #3813 2016-05-22 13:14:58 +01:00
Scott Lahteine
f9b4b90058 Merge pull request #3813 from jbrazio/bugfix/3809 
Stopwatch and PrintCounter improvements
 2016-05-21 18:33:57 -07:00
João Brázio
8c0edb2de4
Fixes #3809 and adds several improvements to the Stopwatch and 
PrintCounter classes
 2016-05-22 01:59:59 +01:00
Scott Lahteine
c5130fd23b Additional instructions for controller reverse options 2016-05-20 18:14:50 -07:00
Scott Lahteine
cadf441059 Merge pull request #3798 from AnHardt/extend-M421 
Extend M421 with I and J parameters
 2016-05-20 16:17:23 -07:00
Scott Lahteine
0c7c45063b PID_ADD_EXTRUSION_RATE based on MarlinKimbra 2016-05-20 16:15:05 -07:00
Scott Lahteine
92ac133f2b Conditionals and Sanity Check for SINGLENOZZLE 2016-05-20 15:48:27 -07:00
Scott Lahteine
69abfef82e Add "SINGLENOZZLE" extruder option 2016-05-20 15:45:11 -07:00
AnHardt
f5a036510f Extend M421 with I and J parameters 
Extend M421 with I and J parameters
 2016-05-21 00:18:09 +02:00
Scott Lahteine
2f6e7b7b9b Merge pull request #3805 from MatixYo/patch-7 
Update language_pl.h to the latest strings
 2016-05-20 14:50:49 -07:00
Scott Lahteine
1a6c72cb57 Apply to the rest of the configs 2016-05-20 11:52:27 -07:00
Scott Lahteine
37c6d0f4ed Reword MESH_G28_REST_ORIGIN comment 2016-05-20 11:52:27 -07:00
Edward Patel
c7d90dc5ec Add option to configure G28 all axis resting position for MBL 2016-05-20 11:52:27 -07:00
Mateusz Juszczyk
bbe4c20ef6 Update language_pl.h 2016-05-20 13:24:34 +02:00
Scott Lahteine
319d184999 Merge pull request #3803 from jbrazio/feature/buildroot-cleanup 
Buildroot cleanup
 2016-05-19 21:34:11 -07:00
Scott Lahteine
a469341555 Merge pull request #3800 from jbrazio/feature/move-felix-cfg 
Moves Felix's dual configuration to a folder
 2016-05-19 18:53:39 -07:00
João Brázio
14652bb141
Moves shared helper scripts to the buildroot 2016-05-20 02:25:13 +01:00
João Brázio
80f05920c5
Moves Felix's dual configuration to a folder 2016-05-20 00:49:16 +01:00
Scott Lahteine
8218558953 Update comments, rename next_ping_ms, followup to #3797 2016-05-19 16:44:57 -07:00
Scott Lahteine
6d68b12e28 Merge pull request #3797 from AnHardt/fix-screen-updatedelay 
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
 2016-05-19 16:29:27 -07:00
AnHardt
e761bdbb4b Remove SF_ARC_FIX from G5 (Cubic B-spline) 
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
 2016-05-19 21:00:12 +02:00
AnHardt
2207001333 No compromises for the manage_heater() 
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
 2016-05-19 20:52:11 +02:00
AnHardt
0c4d885d5b Speedup sreen update delay 
Speedup sreen update delay
and correct a comment.

A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
 2016-05-19 15:41:09 +02:00
Rafa Couto
9d416289cc Update Galician language to 1.1.0-RCBugFix. 2016-05-19 19:33:40 +09:00
Scott Lahteine
07c9a11c3c Automatically set X2 stepper pins 2016-05-18 19:09:09 -07:00
Scott Lahteine
8aa591ca09 Merge pull request #3789 from jbrazio/feature/m999-s-arg 
Implements S1 argument in M999
 2016-05-18 16:58:09 -07:00
Scott Lahteine
138c5c8378 Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix 
DUAL_X_CARRIAGE fixes, improvements, Travis test
 2016-05-18 16:56:54 -07:00
João Brázio
e6effb8f35
Implements S1 argument in M999 2016-05-19 00:13:33 +01:00
Scott Lahteine
2a7b1a85f7 Improve DUAL_X_CARRIAGE sanity check errors 2016-05-18 15:59:28 -07:00
Scott Lahteine
516e79bbda Declare extruder_duplication_enabled in Marlin.h 2016-05-18 15:51:44 -07:00
esenapaj
56d5ae596c Update Japanese trasration 
・Add new translation
・Change translation
 2016-05-18 20:42:50 +09:00
Scott Lahteine
4041508ffb Function decl. in headers don't need "extern" 2016-05-17 18:35:01 -07:00
Scott Lahteine
82c2d308dc Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix 
Bezier style and DELTA patch
 2016-05-17 18:27:48 -07:00
Scott Lahteine
ecec5c5e58 Bezier style and DELTA patch 2016-05-17 18:06:10 -07:00
Scott Lahteine
d66e53c42b Merge pull request #3782 from thinkyhead/rc_home_z_before_g29 
Require homing of Z before G29
 2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5 Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup 
Minor DELTA segmentation speedup
 2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c XYZ unhomed 2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4 Require homing of Z before G29 2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc Minor DELTA segmentation speedup 
Minor DELTA segmentation speedup by pulling calculations out of the loop.
 2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves 
Add BEZIER_CURVE_SUPPORT — G5 command
 2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3 Merge pull request #3775 from jbrazio/bugfix/followup-3770 
G29: Report final position back to host when using MBL
 2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL 2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6 Add stowing process for MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85 Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
Scott Lahteine
58339aea5f Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior 
Bugfix: iteration invokes undefined behavior
 2016-05-15 20:36:25 -07:00
Scott Lahteine
26b4cb5b42 Merge pull request #3771 from thinkyhead/rc_auto_fans_again 
Fix checkExtruderAutoFans
 2016-05-15 20:32:31 -07:00
Scott Lahteine
c9271e610b Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon 
Remove the hotbed icon from the status screen
 2016-05-15 19:11:05 -07:00
Scott Lahteine
2f14934c65 Fix checkExtruderAutoFans 
Make sure to only set the fan state once when extruders share a fan
 2016-05-15 18:54:37 -07:00
João Brázio
ecd490ed49
Bugfix: iteration invokes undefined behavior 2016-05-15 22:45:08 +01:00
Scott Lahteine
abdfd914f8 Merge pull request #3763 from esenapaj/patch-4 
Follow-up for #3720 and #3759
 2016-05-15 12:37:51 -07:00
Scott Lahteine
754b0152f5 Fix MBL zigzag calls 2016-05-15 12:35:01 -07:00
esenapaj
6d722716f7 Follow-up the PR #3720 and #3759 
Update forgotten Configuration_DUAL.h
 2016-05-15 14:08:45 +09:00
João Brázio
451000387d
Remove the hotbed icon when HAS_TEMP_BED is false 2016-05-15 03:00:05 +01:00
Scott Lahteine
a058226799 Prevent watchdog timeout in bezier moves 2016-05-14 17:41:16 -07:00
Scott Lahteine
13175ce7da Fix error checking in M421 2016-05-14 17:12:44 -07:00
Scott Lahteine
bc5a547d55 More robust MBL index / point conversion 2016-05-14 16:45:56 -07:00
Scott Lahteine
a3520b6f01 More precision in M503 output for MBL's M421 2016-05-14 16:19:37 -07:00
Scott Lahteine
1b90682617 Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins 
Remove need to define unused pins as -1 in pins files
 2016-05-14 15:49:22 -07:00
Scott Lahteine
c8a40f06a6 Merge pull request #3759 from thinkyhead/rc_more_printcounter 
Printcounter bugfix and some new features
 2016-05-14 15:36:31 -07:00
Scott Lahteine
585c8a918f Merge pull request #3758 from thinkyhead/rc_verbiage 
Tweaks to some verbiage
 2016-05-14 15:27:11 -07:00
João Brázio
f9a62f6a8e Added PRINTJOB_TIMER_AUTOSTART section to example config files 2016-05-14 15:22:45 -07:00
João Brázio
8a18c52002 Adds an option to disable print job timer auto start 2016-05-14 15:22:44 -07:00
João Brázio
a79267217b M78 now allows stats reset using the S78 argument 2016-05-14 15:22:44 -07:00
João Brázio
b660f1bdb8 Bugfix: Multiple M77 no longer increment the print counter 2016-05-14 15:22:43 -07:00
Scott Lahteine
c63f95f2fe Merge pull request #3748 from clexpert/patch-1 
Lastest changes in Czech translate
 2016-05-14 15:12:39 -07:00
Scott Lahteine
e01e52969e Merge pull request #3757 from thinkyhead/rc_fix_auto_fans 
Don't try to enable unused auto fans
 2016-05-14 15:09:24 -07:00
Scott Lahteine
ddf3e1e22d Tweaks to some verbiage 2016-05-14 15:06:09 -07:00
Scott Lahteine
a713043acd Merge pull request #3749 from esenapaj/patch-3 
Enclose all #error strings by double-quotes
 2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12 Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE 
G29 missing FIX_MOUNTED_PROBE condition
 2016-05-14 15:00:42 -07:00
Scott Lahteine
08dfe08f9a Merge pull request #3754 from jbrazio/feature/update-pt_PT 
Updated pt_PT language pack
 2016-05-14 15:00:12 -07:00
Scott Lahteine
596ebccd54 Merge pull request #3753 from jbrazio/feature/followup-3740 
Warn user about useless of individual axis homing and DELTA kinematics
 2016-05-14 14:59:49 -07:00
Scott Lahteine
6e3556cb75 Merge pull request #3746 from esenapaj/patch-2 
Update Japanese translation
 2016-05-14 14:57:43 -07:00
Scott Lahteine
ddac17a195 Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ) 2016-05-14 14:52:08 -07:00
Scott Lahteine
b4c891dfd2 Remove obsolete reference to prepare_arc_move 2016-05-14 14:51:09 -07:00
Scott Lahteine
9f6b8f7d5b Remove extra @section directive from configs 2016-05-14 14:51:09 -07:00
Scott Lahteine
4d6bb52b26 Don't try to enable unused auto fans 
Addressing #3743
 2016-05-14 14:46:14 -07:00
Scott Lahteine
f13c4a9ec4 Merge pull request #3720 from jbrazio/feature/host-keepalive 
Removes the DISABLE from HOST_KEEPALIVE
 2016-05-14 14:39:31 -07:00
João Brázio
596f15348d
Updated pt_PT language pack 2016-05-14 01:45:15 +01:00
João Brázio
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics 2016-05-14 01:35:05 +01:00
AnHardt
8a4376d51f Idle during long arcs 
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
 2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e Enclose all #error strings with apostrophes 2016-05-13 21:10:23 +09:00
Petr Zahradnik
50b1a6bb2b Lastest changes in Czech translate 2016-05-13 13:51:13 +02:00
AnHardt
b74af78736 Make arc support (G2/G3) configurable 
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
 2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8 fix-FIX_MOUNTED_PROBE 
Add a forgotten condition
 2016-05-13 12:07:17 +02:00
esenapaj
e9d851137d Update Japanese translation 
・Add new translation
 2016-05-13 18:52:35 +09:00
Scott Lahteine
14cd0f4c92 Merge pull request #3740 from thinkyhead/rc_lcd_home_options 
Individual Axis Homing LCD menu items
 2016-05-12 11:59:46 -07:00
esenapaj
69511b5e5e Follow-up the PR #3719(Harmonize LCD comment section) 
It update forgotten Configuration_DUAL.h.
 2016-05-12 19:16:36 +09:00
Scott Lahteine
675e92ab1f Merge pull request #3738 from thinkyhead/rc_limit_i2c_request 
Print an error on bad i2c request
 2016-05-11 19:36:49 -07:00
João Brázio
09150cae79 Individual Axis Homing LCD menu items 2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f Add REVERSE_ENCODER_DIRECTION option 2016-05-11 15:39:28 -07:00
Scott Lahteine
aaeadf0cbd If no "B" parameter given, get 1 byte 2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b Print an error on bad i2c request 
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
 2016-05-11 15:30:02 -07:00
João Brázio
85b2c80838
Updated example configurations 2016-05-11 01:45:49 +01:00
João Brázio
ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option 2016-05-11 01:45:49 +01:00
Scott Lahteine
a454a88f9c Merge pull request #3722 from jbrazio/bugfix/printcounter 
Minor #warning fix for PrintCounter
 2016-05-10 17:17:04 -07:00
Scott Lahteine
03bda5c141 Merge pull request #3719 from jbrazio/feature/update-configs 
Harmonize LCD comment section
 2016-05-10 17:16:23 -07:00
Scott Lahteine
c827671299 Mention Z_PROBE_ALLEN_KEY in probe sanity checks 2016-05-10 13:50:20 -07:00
Scott Lahteine
be5d17de17 Merge pull request #3713 from thinkyhead/rc_file_offset_long 
Use code_value_long for potentially large values
 2016-05-10 09:15:53 -07:00
Scott Lahteine
56dd31ea3c Use code_value_long for potentially large values 
Addressing #3711
 2016-05-10 09:15:31 -07:00
João Brázio
eafa16a781
Minor #warning fix for PrintCounter 2016-05-10 14:14:54 +01:00
João Brázio
5373ac6373
Updated example configurations 2016-05-10 13:42:00 +01:00
João Brázio
aa5a4716cf
Update default config 2016-05-10 13:37:21 +01:00
esenapaj
1a75509a3c Cleanup for Danish file 
・Arrange the strings in unified order
・Remove "#ifdef DELTA_CALIBRATION_MENU" directive
・Adjust spacing
 2016-05-10 02:43:25 +09:00
esenapaj
cf6c607425 Update Japanese translation 
・Add new translation
・Add translation for 16 width ASCII LCD
・Change translation
・Revert translation from Japanese to English
・Fix typo
 2016-05-10 02:43:24 +09:00
Scott Lahteine
6f36b7c1cd Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x 
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
 2016-05-08 19:33:37 -07:00
Scott Lahteine
050e0bd2af Merge pull request #3705 from thinkyhead/rc_runaway_logic 
Fallthru in thermal runaway test when TRState changes
 2016-05-08 19:00:24 -07:00
Scott Lahteine
5f7ad16b19 Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move 
Fix dipping on DELTA robots during G29
 2016-05-08 18:42:57 -07:00
Scott Lahteine
96b71e62c0 Fix dipping on DELTA robots during G29 
- Addressing #3689, et. al.
 2016-05-08 18:28:46 -07:00
Scott Lahteine
ea1dd31851 Enclose #error strings with apostrophes in quotes 2016-05-08 18:08:39 -07:00
Scott Lahteine
9b92bb8f31 Set the initial state based on target temperature 2016-05-08 17:25:44 -07:00
Scott Lahteine
6b13c430ae The TRReset state is not needed with fall-through 2016-05-08 17:01:46 -07:00
Scott Lahteine
c2522ce1f5 Fallthru in thermal runaway test when TRState changes 2016-05-08 16:51:33 -07:00
Scott Lahteine
d32d9a3c5c Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags 
Cleanup and consolidate probe conditionals for clarity
 2016-05-08 16:42:22 -07:00
Scott Lahteine
15fc93d742 Cleanup and consolidate probe conditionals for clarity 2016-05-08 12:59:43 -07:00
Scott Lahteine
5ca6334fd2 Cleanup pins files, fixup analogtodigitalpin, etc. 2016-05-08 12:38:00 -07:00
esenapaj
9186be7b83 Fix compilation error in debugging code 
Fix compilation error in Thermal Runaway debugging code
 2016-05-09 01:57:21 +09:00
Scott Lahteine
51109d4af7 Use AxisEnum with _lcd_babystep() 2016-05-05 21:04:30 -07:00
Scott Lahteine
b65ea98d6b Localize babystepping in the Temperature class 
So that `ultralcd.cpp` doesn’t need to worry about the details.
 2016-05-05 15:00:31 -07:00
Scott Lahteine
0c7beb832c Merge pull request #3681 from esenapaj/patch-1 
Follow-up the PR #3643(Temperature singleton)
 2016-05-05 12:47:06 -07:00
Scott Lahteine
fc5fe2cc22 Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers 
Moved DELTA radius/rod default trimmer values to Conditionals.h
 2016-05-05 11:38:14 -07:00
esenapaj
1a97442d19 Follow-up the PR #3643(Temperature singleton) 
Follow-up the PR #3643(Temperature singleton)

・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.

・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.

・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
 2016-05-05 18:01:39 +09:00
Scott Lahteine
4f6120f70f Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature 
Temperature singleton
 2016-05-04 20:41:46 -07:00
Scott Lahteine
084f6b5b44 Temperature singleton class 2016-05-04 19:42:12 -07:00
Scott Lahteine
142bd3f3e7 Disable THERMAL_PROTECTION_BED with no sensor 2016-05-04 19:36:51 -07:00
Scott Lahteine
13f85a2b50 Can't use the ENABLED macro as a boolean 2016-05-04 16:33:57 -07:00
João Brázio
23567a1d8b
Moved DELTA radius/rod default trimmer values to Conditionals.h 2016-05-05 00:18:32 +01:00
Scott Lahteine
b4b5c7a6b7 Merge pull request #3670 from thinkyhead/rc_scoovo_controller 
Use directional buttons when defined
 2016-05-03 17:42:18 -07:00
Scott Lahteine
6398d497b3 Ultimate followup to Stepper/Planner patch 
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
 2016-05-03 17:07:37 -07:00
Scott Lahteine
ddafb859e2 Use directional buttons when defined 2016-05-03 12:50:49 -07:00
Scott Lahteine
b959020532 Merge pull request #3667 from esenapaj/patch-1 
Additional follow-up the PR #3631(Encapsulate S...
 2016-05-03 09:36:09 -07:00
esenapaj
212b17d510 Fix for PR #3526(Configuration.h LCD & SDCard s... 
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)

It removes duplicated BQ_LCD_SMART_CONTROLLER.
 2016-05-03 21:35:02 +09:00
esenapaj
605808fe37 Additional follow-up the PR #3631(Encapsulate S... 
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.

・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.

・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
 2016-05-03 18:28:37 +09:00
Scott Lahteine
7fd0243048 Cleanup, debug strings in Planner::adjusted_position 2016-05-02 20:11:27 -07:00
Scott Lahteine
85e732d5fd Fix BABYSTEPPING, add it to Travis test 2016-05-02 20:01:00 -07:00
Scott Lahteine
37c4970d87 Merge pull request #3660 from esenapaj/patch-2 
Follow-up the PR #3631(Encapsulate Stepper, ...
 2016-05-02 15:23:38 -07:00
Scott Lahteine
ad27d3c523 Merge pull request #3659 from esenapaj/patch-1 
Some clean-up for example configuration files
 2016-05-02 15:22:29 -07:00
Scott Lahteine
f1c1a8dc59 Merge pull request #3661 from Blue-Marlin/83filen2 
8.3-filenames second try
 2016-05-02 14:47:26 -07:00
Jochen Groppe
0bae00c1ed Merge pull request #3644 from tkurbad/german_translation 
Revisited German translation
 2016-05-02 16:46:19 +02:00
Blue-Marlin
5ad7d263e9 8.3-filenames second try 
Fix for #6 3593, #3648
this time excludung 'DEL' instead of accidently '~'.
 2016-05-02 15:58:04 +02:00
Torsten Kurbad
aae2f502e0 Revisited German translation 2016-05-02 15:18:12 +02:00
esenapaj
a82cfcff2d Follow-up the PR #3631(Encapsulate Stepper, ... 
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).

movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
 2016-05-02 22:04:26 +09:00
esenapaj
2fa4bc344c Some clean-up for example configuration files 
Some clean-up for example configuration files

Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)

Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h

Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing

Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
 2016-05-02 21:16:00 +09:00
Scott Lahteine
da47b83b3d Revert PR 3648 to fix SD printing 
The character 0x7E is common in 8.3 filenames. Maybe the last condition
should be removed completely instead.
 2016-05-01 18:04:04 -07:00
Scott Lahteine
60c6efb75c Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge 
Introduce temp watch protection for the bed
 2016-05-01 13:58:28 -07:00
Scott Lahteine
5b7a6c217a Include more fans in sensitive pins list 2016-05-01 13:49:32 -07:00
Scott Lahteine
f508c54c6c Use #undef in AZTEEG_X3_PRO for RAMPS overrides 2016-05-01 13:49:32 -07:00
Scott Lahteine
c6f1337f5c NOOP macro for do-nothing macros 2016-05-01 13:49:32 -07:00
Scott Lahteine
c2145566c7 Merge pull request #3631 from thinkyhead/rc_singletons 
Encapsulate Stepper, Planner, Endstops in singleton classes
 2016-05-01 13:47:47 -07:00
Scott Lahteine
fbf69081b4 Updated comment for THERMAL_PROTECTION_BED 2016-05-01 13:12:51 -07:00
gralco
908229dbb3 Introduce temp watch protection for the bed 
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.

Conflicts:
	Marlin/Configuration_adv.h
 2016-05-01 13:12:51 -07:00
Scott Lahteine
77d6e5283b Merge pull request #3648 from Blue-Marlin/83filenames 
Don't reject 8.3-filenames with chars > 0x7f
 2016-04-30 17:48:03 -07:00
Scott Lahteine
24a15332b3 Encapsulate dual Z endstop handling 2016-04-30 17:26:50 -07:00
Scott Lahteine
462a8a951e A little extra gcode_T spacing 2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f Planner singleton class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344 Localize M119 in Endstops class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8 Stepper and Endstops as singleton objects 2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f Prevent stuck M109/M190 when target is changed 2016-04-30 17:03:54 -07:00
Blue-Marlin
ac4caab8f1 Don't mangel 8.3-filenames with chars > 0x7f 
Don't mangel 8.3-filenames with chars > 0x7f

Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected
by Marlin until now.

With these 'malformed' filenames can now be worked with:
In the LCD menue
With RepetierHost (V1.6.1 tested) - full support. Characters are
displayed as '?'
With Octoprint (1.2.10 tested) the files do not appear in the files
area. At the console, listed with M20 they appear with a '�'.
With Pronterface the files appear in the sd-window but you can't start
them. They are mangled by pronterface. The names are altered and than
recected by Marlin. In the console they apper with differen but not the
correct characters.

All in all a little step forward.

Fix for #3593
 2016-04-30 17:37:22 +02:00
Scott Lahteine
eeef571be2 Merge pull request #3613 from thinkyhead/rc_acceleration_fix1 
Fix an acceleration anomaly by making locals signed
 2016-04-29 16:39:31 -07:00
Scott Lahteine
c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter 
Print job statistics
 2016-04-29 15:31:14 -07:00
Scott Lahteine
96b2b3f4fe Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps 
Keepalive not needed while waiting for temperatures
 2016-04-29 15:20:12 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files 2016-04-29 23:13:59 +01:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter 2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files 2016-04-29 23:13:59 +01:00
João Brázio
8fb23e899f
PrintCounter EEPROM read/write optimizations 2016-04-29 23:13:59 +01:00
João Brázio
9589e51810
Disable DEBUG_PRINTCOUNTER 2016-04-29 23:13:59 +01:00
João Brázio
e2da7e5000
Updated the default configuration and fixed a printcounter.h typo 2016-04-29 23:13:58 +01:00
João Brázio
d6cfcc9c8b
Added new G-Code: M78 2016-04-29 23:13:58 +01:00
João Brázio
4f541c5bb5
Added a new object: PrintCounter 2016-04-29 23:13:58 +01:00
João Brázio
26b166d7cf
Made all stopwatch::debug() calls static 2016-04-29 23:13:58 +01:00
Scott Lahteine
5897b58a70 Merge pull request #3634 from esenapaj/patch-2 
Update distribution date and readme again
 2016-04-28 21:19:08 -07:00
Scott Lahteine
f4706bb90e Keepalive not needed while waiting for temperatures 2016-04-28 21:11:15 -07:00
Scott Lahteine
924285afa6 Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc 
Correct the REVERSE_MENU_DIRECTION comment
 2016-04-28 20:28:46 -07:00
Scott Lahteine
f1b00eb12b Correct the REVERSE_MENU_DIRECTION comment 2016-04-28 20:27:17 -07:00
Scott Lahteine
8905908081 Merge pull request #3632 from thinkyhead/i3_millie_language_fun 
Simplified LCD Language settings
 2016-04-28 19:52:10 -07:00
Scott Lahteine
6c48852b20 Update distribution date 2016-04-28 18:06:53 +09:00
Scott Lahteine
2142d5a62e Merge pull request #3627 from Blue-Marlin/German-again-and-again-and-agin 
Correct an error in lang_de
 2016-04-27 20:14:15 -07:00
Scott Lahteine
0c11566f42 Replace LANGUAGE_INCLUDE with LCD_LANGUAGE 2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be Make DISPLAY_CHARSET_HD44780 a single setting 2016-04-27 20:06:40 -07:00
Blue-Marlin
e89f01d044 Correct an error in lang_de 
There is no way to translate "A-travel" to "A Rückzug". Thats simply
wrong.
 2016-04-27 12:59:48 +02:00
esenapaj
ee2f37f3cc Update distribution date and readme 
It sync with the RC.
 2016-04-27 11:21:51 +09:00
Scott Lahteine
ad0f70f2f3 Merge pull request #3620 from Blue-Marlin/feedrate_atfer_toolchange 2016-04-26 17:33:15 -07:00
Scott Lahteine
d58c5ac446 Merge pull request #3618 from esenapaj/patch-1 2016-04-26 17:20:04 -07:00
Scott Lahteine
2bb5cf5291 Merge pull request #3622 from floyd871/patch-1 2016-04-26 17:14:36 -07:00
Blue-Marlin
e58e281473 Fix feedrate after toolchange 
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
 2016-04-27 00:57:45 +02:00
João Brázio
32d798fcc7
Converted all files on src to Unix file format 2016-04-26 21:23:39 +01:00
Michael Neumann
59cfc84dad German "Umlaute" 
We don't have to  avoid German "Umlaute" any more.
 2016-04-26 21:52:05 +02:00
Matt Keveney
4dfc496965 added recalc_delta_settings() call in Config_RetrieveSettings. Appears to be necessary any time delta-related parameters (M665) are modified 2016-04-26 20:01:53 +09:00