Commit Graph

400 Commits

Author SHA1 Message Date
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Thomas Moore
586d50ff99 Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Scott Lahteine
b5677907d0 Minor speedup for SCARA scaling
And cleanup of Delta IK macros...
2017-12-21 22:39:06 -06:00
Scott Lahteine
4f375cd17d Match sign for filwidth across vars 2017-12-20 00:17:32 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00
Scott Lahteine
a20eacaa48 UBL devel debugging flag 2017-12-11 00:20:29 -06:00
Scott Lahteine
ccca1ade2d Always report position on config load/reset 2017-12-10 23:05:33 -06:00
Scott Lahteine
5d01a2f467 Move temperature reporting to Temperature class 2017-12-06 21:12:55 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26 2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5 Comment/cleanup motion code 2017-12-02 01:42:37 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling.
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
2017-11-23 21:41:27 -06:00
Scott Lahteine
622d100c30 No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
RowanMeara
227b96b28b Fix M428
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
3293823642 Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
Scott Lahteine
7aadfe32e7 Prevent position_is_reachable disaster 2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27 PROBE_SELECTED etc. 2017-11-10 19:17:45 -06:00
Scott Lahteine
deaa70c2cc Update macros for parity with 2.0.x 2017-11-10 04:32:27 -06:00
Thomas Moore
658e1ebe5a Add delta_height variable in lieu of using home_offset 2017-11-08 23:21:02 -06:00
Scott Lahteine
8ab368559a Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:30:23 -05:00
Scott Lahteine
640526f0c8 Operate in Native Machine Space 2017-11-03 22:40:30 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Luc Van Daele
e64cfb13b8 (1.1.x) auto tune calibration parameters (#8031)
* auto tune calibration parameters

* solve warnings

* Tweaks to formatting

* review Thinkyhead

* Error
2017-10-26 23:49:20 -05:00
studiodyne
e04902f589 Add EXTRA_FAN_SPEED feature 2017-10-16 02:32:30 -05:00
Scott Lahteine
da93a272a0 Move leveling_is_active to a macro 2017-10-13 16:11:27 -05:00
GMagician
33d28c24bf Implementing [FR] #7548
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697)
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
2017-09-24 01:45:31 -05:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Bob-the-Kuhn
6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine
50ab9c2e04 General cleanup of spacing, comments 2017-05-29 15:34:14 -05:00
Scott Lahteine
01e7e234c6 Add more options to the Bed Leveling menu 2017-05-28 14:04:28 -05:00
Thomas Moore
fb5e0ffe16 Unify M600 and M125 pause features (#6407)
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine
02f15f6775 UBL-related cleanup, spacing, standards
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
75badae2f8 Disable PROBE_MANUALLY for UBL
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
267f77b18b More constraint on axis_unhomed_error 2017-05-14 16:03:02 -05:00
oldmcg
91841d75c9 UBL_DELTA (#6695)
UBL on Delta's....     Should be close!    Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
Scott Lahteine
081bf1f879 Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
Brian
faa270071d Improve BLTOUCH_HEATERS_OFF functionality
- rename to PROBING_HEATERS_OFF
 - move heater pausing functionality into thermalManager
   - add variables, pause(), ispaused(), other functions
 - add fan pausing functionality -> PROBING_FANS_OFF
 - add probing_pause() wrapper
 - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
 - example configs
2017-05-07 16:22:08 -04:00