Commit Graph

36 Commits

Author SHA1 Message Date
Scott Lahteine
ffe0e2d19a SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
Scott Lahteine
2c13922c46 Implement USE_CONTROLLER_FAN as a feature 2017-05-02 20:18:52 -05:00
Scott Lahteine
04050237f0 Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
Scott Lahteine
95275eb9b3 Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
Scott Lahteine
b6aa894893 Rename auto fan pins and add auto fan flags 2016-10-26 17:51:26 -05:00
esenapaj
f41c60d4a4 Follow-up the PR #4955, etc
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
2016-10-10 14:22:43 +09:00
Scott Lahteine
ba43277429 Always define status LED pins 2016-09-25 06:33:37 -05:00
Scott Lahteine
fba0b67f7d Rename status led pins 2016-09-25 06:33:37 -05:00
Scott Lahteine
e78274a7f4 Consistent order/formatting of pins files 2016-08-25 20:59:45 -05:00
Scott Lahteine
9cb596e88c Define Z_MIN_PROBE_PIN always, allowing override 2016-08-02 20:31:44 -07:00
Scott Lahteine
49f75b7891 pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 04:17:21 -07:00
Anthony Birkett
7a377c1d75 Add "About Printer" information menu.
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
2016-07-02 15:22:26 -07:00
Scott Lahteine
0b0b7aac6e Support for VIKI2 in RAMPS and derivatives 2016-06-28 18:19:18 -07:00
Scott Lahteine
f508c54c6c Use #undef in AZTEEG_X3_PRO for RAMPS overrides 2016-05-01 13:49:32 -07:00
Scott Lahteine
0da744b7b0 Further cleanup of comments, partial Doxygen-style
Following up on #3231
2016-03-25 00:45:56 -07:00
jbrazio
5e5d250832 Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00
Scott Lahteine
cacf04f8a7 Base RAMPS-like boards on RAMPS 1.4 2016-03-06 05:52:00 -08:00
Scott Lahteine
0c7f7ebcfb Styling adjustments (PR#2668 & PR#2670)
Keep "astyled" reformatting
2015-10-03 22:02:45 -05:00
Christian Lefrançois
a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
* Fix a couple of renames omission and macro expansion errors.
2015-08-20 06:04:46 -05:00
AnHardt
e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
2015-08-11 14:41:36 -05:00
Scott Lahteine
56702e7bb9 Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
Scott Lahteine
270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
2015-08-02 21:59:41 -05:00
Scott Lahteine
8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
2015-08-02 21:34:13 -05:00
Scott Lahteine
94a796c8cc Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
2015-07-31 17:13:53 -05:00
Scott Lahteine
c0d7ea3e7e Overridable Options - Part 4 (PR#2556)
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
2015-07-31 00:44:53 -05:00
Natealus
b6f2bff461 Azteeg X3 Pro Pin fix ups 2015-04-05 23:34:56 -06:00
Natealus
ab11f90da0 Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
2015-04-03 23:14:03 -06:00
Natealus
ca5821aa57 Made #ifdef DELTA branch instead
Another fellow here gave me the idea to do it this way
2015-03-29 01:08:00 -06:00
Natealus
04fda6b3e9 Undesired behavior with endstops swapped
Made my swap commented out so its the option not the default.
2015-03-29 00:55:47 -06:00
Natealus
ca1477d830 Revert "Undesired behavior with endstops swapped"
This reverts commit 15028e9b08.
2015-03-29 00:52:53 -06:00
Natealus
15028e9b08 Undesired behavior with endstops swapped
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
2015-03-29 00:42:40 -06:00
Natealus
234a9d0b12 Viki 2 Pins from Manual
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
2015-03-28 22:11:12 -06:00
Natealus
22bea37393 Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
2015-03-28 20:14:42 -06:00
Scott Lahteine
ba871e46bf Fix compiler warnings
- Patched up for most included configurations
2015-03-27 20:29:05 -07:00
Scott Lahteine
7891eacf21 Merge branch 'Development' into fixup_ramps_boards
- Also apply cleanup for #1514
2015-02-19 17:26:22 -08:00
Scott Lahteine
574a5ab72a Split up pins to make it more manageable
Hopefully this is helpful to organization and future expansion….
2015-01-27 15:32:34 -08:00