AnHardt
56d3e6615d
MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'#
2015-01-29 11:19:10 +01:00
Scott Lahteine
1258980832
Merge pull request #1429 from bq/Development
...
Add bq Witbox 3D printer
2015-01-29 01:14:18 -08:00
Victor Andueza
766762a4dc
Change url link
2015-01-29 09:28:50 +01:00
Scott Lahteine
7df9ca051c
Merge pull request #1428 from thinkyhead/issue_1388_eeprom
...
Make EEPROM storage consistent
2015-01-28 22:58:04 -08:00
Scott Lahteine
fe3810f073
yeah, what he said
2015-01-28 22:27:15 -08:00
Scott Lahteine
6137bbd484
use eeprom read correctly
2015-01-28 22:10:31 -08:00
Scott Lahteine
9bc9051405
Flag EEPROM write errors on serial output
...
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
2015-01-28 21:19:51 -08:00
Scott Lahteine
ff99ca3040
Fix alignment of Restore following PIDTEMP
...
Should be reading 4 x 4 PID values instead of 4 x 3
2015-01-28 20:48:32 -08:00
Philip Schell
6c285930cb
Fixing wrong pin to heater extruder 2 <-> 3
...
Extruder 2 and 3 was swapped
2015-01-28 23:57:22 +01:00
Victor Andueza
0d4ce27b79
Add pins_WITBOX file
2015-01-28 17:26:50 +01:00
Victor Andueza
13118cde33
Add bq Witbox 3D printer
2015-01-28 16:52:36 +01:00
Scott Lahteine
093fedfde8
Make EEPROM storage consistent
...
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
2015-01-28 01:08:48 -08:00
Scott Lahteine
34377ee512
Merge pull request #1427 from thinkyhead/fewer_preheat_strings
...
Remove language strings that only add a number
2015-01-27 22:10:08 -08:00
Scott Lahteine
7378a7fef4
Merge pull request #1408 from thinkyhead/cleanup_servo
...
Formatting cleanup of quiet sources
2015-01-27 22:09:04 -08:00
Scott Lahteine
5fbef6bed2
Merge pull request #1409 from thinkyhead/rename_lastnr
...
Rename lastnr to autostart_index and...
2015-01-27 22:07:23 -08:00
Scott Lahteine
53eea611b8
Fix MSG_NOZZLE
2015-01-27 22:00:32 -08:00
Scott Lahteine
d7211a5324
Changes for Portuguese too
2015-01-27 21:53:08 -08:00
Scott Lahteine
0a21727c0a
Portuguese (pt) and Brazilian Portuguese (pt-br)
2015-01-27 21:45:21 -08:00
Scott Lahteine
c90f2e77d8
Remove language strings that only add a number
...
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
2015-01-27 21:36:58 -08:00
Scott Lahteine
2ce4a102ee
Add support for Megatronics 3 a la #1426
2015-01-27 15:54:46 -08:00
Scott Lahteine
ae4b348d77
Make sure _Ex_PINS is defined
...
Also fix analogInputToDigitalPin so it uses proper C hex notation
2015-01-27 15:36:47 -08:00
Scott Lahteine
80be6f3f91
tweak tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
ebe78cb36f
tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
82474fef8a
Max endstop pins disabled by configuration
...
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
2015-01-27 15:33:21 -08:00
Scott Lahteine
8045e4d60d
Add support for 4th extruder
...
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
2015-01-27 15:33:21 -08:00
Scott Lahteine
df4f3e7712
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
b6ecbd8cc4
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
4e573134de
Cleanup heading
2015-01-27 15:32:34 -08:00
Scott Lahteine
574a5ab72a
Split up pins to make it more manageable
...
Hopefully this is helpful to organization and future expansion….
2015-01-27 15:32:34 -08:00
clefranc
d55c62bf9f
Update ConfigurationStore.cpp
...
Moved #endif to allow filament settings to print.
2015-01-27 13:28:37 -05:00
clefranc
e779641c73
Update ConfigurationStore.cpp
...
Added PIDTEMP dummy write to align EEPROM read/write operation.
2015-01-27 13:25:47 -05:00
Scott Lahteine
baac6e242d
Merge pull request #1419 from AnHardt/bootsplash
...
repair Bootsplash
2015-01-27 00:30:29 -08:00
AnHardt
75cf302da3
example configurations changed to meet Configuration.h
2015-01-27 00:01:33 +01:00
Philip Schell
61fd45a0c2
Add 4th extruder
2015-01-26 21:22:00 +01:00
Philip Schell
2650be4921
Add 4th extruder
2015-01-26 21:21:31 +01:00
Philip Schell
a9763d894e
Add 4th extruder
2015-01-26 21:20:56 +01:00
Philip Schell
4949088302
Add 4th extruder
2015-01-26 21:20:04 +01:00
Philip Schell
fc5204bd42
Add 4th extruder
2015-01-26 21:17:35 +01:00
Philip Schell
9834818ef7
Add 4th extruder
2015-01-26 21:16:23 +01:00
Philip Schell
8696963154
Add 4th extruder
2015-01-26 21:15:24 +01:00
Philip Schell
ee8a7419f4
Add 4th extruder
2015-01-26 21:14:18 +01:00
Philip Schell
e18403235d
Add 4th extruder
2015-01-26 21:12:55 +01:00
Philip Schell
7baee555f4
Add 4th extruder
2015-01-26 21:11:49 +01:00
Philip Schell
cebc7daf2a
Add 4th extruder
2015-01-26 21:10:42 +01:00
Philip Schell
ef4c7abb21
Update language_es.h
...
Add 4th extruder
2015-01-26 21:09:24 +01:00
Philip Schell
22e591518a
Update language_de.h
...
Add 4th extruder
2015-01-26 21:08:13 +01:00
Philip Schell
a20c35bb38
Update language_ca.h
...
Add 4th extruder
2015-01-26 21:04:31 +01:00
AnHardt
aa48056c03
Made centering of bootlogo work and removed contraproductiv setScale2x2() in dogm_lcd_implementation.h
2015-01-26 17:26:22 +01:00
AnHardt
0d219b3e14
Make centering of STRING_SPLASH work
2015-01-26 16:00:10 +01:00
AnHardt
59315330dd
Remove definition of VERSION_STRING and replace where usend with STRING_VERSION
2015-01-26 15:52:01 +01:00
AnHardt
8c792c7b22
Make STRING_VERSION and VERSION_STRING the same
2015-01-26 15:40:44 +01:00
Scott Lahteine
865ca0ef04
Merge pull request #1405 from MagoKimbra/4th-extruders
...
All the additions look proper. I can't think of any other extruder-count-related items that you might have missed. So, with some optimism, I will merge this for testing.
2015-01-25 19:30:51 -08:00
MagoKimbra
3021f7f743
Fix PID_dT
...
Add PID_dT in temeprature.cpp
2015-01-25 17:56:14 +01:00
Scott Lahteine
a7b02975b7
No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD
...
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
2015-01-24 05:10:48 -08:00
Scott Lahteine
6723388f7f
Proposed fix to #1379 . Printrboard I2C LCD support
2015-01-24 05:01:02 -08:00
Scott Lahteine
03c9cb60e8
Rename lastnr to autostart_index and...
...
Replace instances of the number 13 with FILENAME_LENGTH where
appropriate.
2015-01-24 04:57:44 -08:00
MagoKimbra
ef5959a705
Fix Temperature
...
Githun insert this line when i merge with actual Branch development...
2015-01-24 13:49:29 +01:00
MagoKimbra
3d4ee6c868
Merge branch '4th-extruders' of https://github.com/MagoKimbra/Marlin into 4th-extruders
...
Conflicts:
Marlin/temperature.cpp
2015-01-24 13:41:15 +01:00
MagoKimbra
986e723eeb
Add 4th extruder
2015-01-24 13:37:58 +01:00
Scott Lahteine
f16bdd2ff2
Borrow from Ultimaker to fix MAX6675 SPI conflict
...
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
2015-01-24 03:49:15 -08:00
Scott Lahteine
06c3b37933
Formatting cleanup of quiet sources
...
Formatting for code-folding plus minor style changes to less active
code.
2015-01-23 22:26:52 -08:00
Scott Lahteine
23fcd1ecb2
Merge pull request #1407 from thinkyhead/cleanup_marlinserial
...
Formatting cleanup of quiet sources
2015-01-23 21:33:43 -08:00
Scott Lahteine
fd78902194
Formatting cleanup of quiet sources
2015-01-23 21:11:50 -08:00
Scott Lahteine
5c1814383a
Merge pull request #1390 from floyd871/Development
...
Show Custom M_Code for Z-Probe Offset when entering M503
2015-01-23 20:08:23 -08:00
MagoKimbra
0ebf896070
Add 4th extruder
2015-01-23 23:13:06 +01:00
Michael Neumann
a9d7ab9530
Update ConfigurationStore.cpp
...
Done
2015-01-23 21:05:27 +01:00
Scott Lahteine
3a9a3e5ed8
Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
...
This define is not used.
2015-01-23 10:51:06 -08:00
Scott Lahteine
54d5b52a2e
Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
...
Code wont compile with extruder but without bed runaway protection defined.
2015-01-23 08:36:25 -08:00
Mark Hindess
0ce252ba7a
This ifdef is for bed code so should use bed constants for testing.
...
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
2015-01-23 16:30:13 +00:00
Scott Lahteine
9040446780
Merge pull request #1395 from AnHardt/iss1394
...
removed function step_wait() from stepper.cpp
2015-01-23 06:58:10 -08:00
Scott Lahteine
25f79c5010
Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
...
Add: Board for Vellemann K8200 (derived from 3Drag)
2015-01-23 06:08:38 -08:00
Scott Lahteine
9ce75ab7de
Merge pull request #1386 from roglio/Development
...
Fixing a build error for melzi and gfx display
2015-01-23 06:00:24 -08:00
Scott Lahteine
15a00a5a7c
Add 1µs delay in other appropriate spots
2015-01-23 03:24:45 -08:00
AnHardt
23cb899c5a
removed function step_wait() from stepper.cpp
...
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
Scott Lahteine
d9d4a78e0f
Add proper delay in stepper.cpp
...
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
CONSULitAS
d1322dafc9
Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
...
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag , too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
CONSULitAS
3b50a5e2e6
Add: Board for Vellemann K8200 (derived from 3Drag)
...
## Add: Board for Vellemann K8200 (derived from 3Drag)
* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78
* language.h.: machine name and firmware URL for new board
* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
Michael Neumann
2d454da3af
Update ConfigurationStore.cpp
...
Show Custom M Code when entering M503
2015-01-20 16:21:44 +01:00
Scott Lahteine
4f35de991a
Merge pull request #1383 from CONSULitAS/Development
...
Update Boards.h for Vellemann K8200 - comment only
2015-01-19 15:59:38 -08:00
roglio
22571ca13d
Revert "Configuration for Aurora Z605"
...
This reverts commit 935ee968a7
2015-01-19 15:02:11 +01:00
roglio
935ee968a7
Configuration for Aurora Z605
...
Still not fine tuned but working.
2015-01-19 11:18:52 +01:00
roglio
ccdbeda526
Fixing a build error for melzi and gfx display
...
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.
This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
CONSULitAS
e13f159343
Update Boards.h for Vellemann K8200 - comment only
...
## Update Boards.h for Vellemann K8200 - comment only
* Boards.h: updated comment for board 3Drag - K8200 uses same board
2015-01-19 00:53:17 +01:00
CONSULitAS
51c7f2fd5a
Revert "## Add: Example Configuration for Vellemann K8200"
...
This reverts commit 5333590ac2
2015-01-19 00:37:57 +01:00
CONSULitAS
5333590ac2
## Add: Example Configuration for Vellemann K8200
...
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)
* K8200/language.h: updated machine name and URL for K8200
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch
* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
Denis Chertykov
ba3ac40b9d
Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
...
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
2015-01-18 20:18:43 +03:00
daid
53f971095d
Revert "Reduce PROGMEM warnings"
2015-01-16 16:48:22 +01:00
PxT
67b597ad46
Update printrboard pin assignments
...
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
galexander1
d4880a9e60
Revert "Move Sd library out into library"
2015-01-15 18:52:10 -05:00
Bo Herrmannsen
ccdb086fc8
Merge pull request #1363 from PxT/patch-1
...
Fixes #1361
2015-01-15 10:57:44 +01:00
Bo Herrmannsen
5151db5c2f
Merge pull request #1349 from msutas/patch-2
...
Improvement - G29 Option for Not Retracting Servo
2015-01-15 10:56:31 +01:00
Bo Herrmannsen
1746b2582b
Merge pull request #1332 from Sniffle/Development
...
Rambo FAN_PIN documentation and servo support
2015-01-15 10:56:17 +01:00
Bo Herrmannsen
4b51b5a46d
Merge pull request #1357 from odewdney/SDlib
...
Move Sd library out into library
2015-01-15 10:56:07 +01:00
Bo Herrmannsen
f2cb4a3655
Merge pull request #1353 from thawkins/Development
...
fix avrdude upload in makefile
2015-01-15 10:55:33 +01:00
PxT
9fd4292923
Fixes #1361
2015-01-13 10:59:50 -08:00
odewdney
f84ff4ba7d
Move SD Fat library out of main src
2015-01-13 13:31:55 +00:00
Bo Herrmannsen
ab074dac17
Merge pull request #1344 from grob6000/independent_pid
...
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
Bo Herrmannsen
d4a665694a
Merge pull request #1350 from odewdney/Development
...
Reduce PROGMEM warnings
2015-01-13 11:26:50 +01:00
odewdney
9d9c859ac1
First move of SdFat library
2015-01-13 08:04:32 +00:00
Tim Hawkins
5045d17a39
fix avrdude upload in makefile
2015-01-13 13:01:43 +08:00
