MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,110 Commits 1 Branch 0 Tags 96 MiB
369f1a64d8
Commit Graph

361 Commits

Author SHA1 Message Date
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
Scott Lahteine
e47316c9d3 Tweak cleaning buffer / SD finished command 2017-12-24 20:33:58 -06:00
Scott Lahteine
56d355f8de Revert "[Bugfix-1.1.x] initial step correction (#8735)" 
This reverts commit ec028bf747.
 2017-12-17 02:04:44 -06:00
teemuatlut
0ac0324af2 [1.1.x] TMC driver update (#8712) 2017-12-15 15:02:39 -06:00
Scott Lahteine
8519451161 Comment, improve filament width sensor 2017-12-13 02:35:23 -06:00
Scott Lahteine
bb33a26e62 Apply const to axis args 2017-12-11 00:20:29 -06:00
Bob-the-Kuhn
ec028bf747 [Bugfix-1.1.x] initial step correction (#8735) 
* tested

* forgot one item
 2017-12-09 18:20:25 -06:00
Scott Lahteine
55acb65e27 Updates for stepper parity with 2.0.x 
Matching changes from #8725
 2017-12-08 23:07:52 -06:00
Scott Lahteine
75eb93140f Discard all CONTINUED blocks on interrupted move 2017-12-08 02:13:51 -06:00
Scott Lahteine
574153a810 No lcd_map_control needed in quick_stop 2017-12-06 21:43:26 -06:00
Scott Lahteine
3b30cc90f1 Clean on trigger instead of split_first_move flag 2017-12-06 21:43:26 -06:00
Scott Lahteine
93560836de Allow buffer clean without release command 2017-12-06 21:12:55 -06:00
Scott Lahteine
1d0ee83e18 Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:44:33 -06:00
Scott Lahteine
8b7c274db5 Comment/cleanup motion code 2017-12-02 01:42:37 -06:00
Scott Lahteine
99b71c1dde Move lcd_map_control to UBL 
For parity with bugfix-2.0.x
 2017-11-22 18:45:55 -06:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
cbfcce09fa Remove legacy ADVANCE feature 2017-10-09 04:27:45 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Tannoo
e927941c06 Bugfix (#7265) 
Fix compile error when UBL is enabled but there is no LCD Panel.
 2017-07-08 09:44:50 -05:00
Tannoo
aaacef9441 Corrections (#7231) 
20x4 map integration.    Also some minor changes to the UBL Menu layout.     Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
 2017-07-07 11:05:08 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
dot-bob
b3c36c98fd Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d Various cleanups ahead of digipot save 2017-06-24 23:56:24 -05:00
Ross Allan
cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine
8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine
e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Scott Lahteine
04b07a6ecc Unused var in Stepper 2017-06-04 17:25:16 -05:00
Scott Lahteine
e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
081bf1f879 Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
Scott Lahteine
ff35b11d08 Resolve compiler complaint about memset volatile * 2017-04-30 22:24:03 -05:00
Scott Lahteine
5512130d6c Only set Compare Mode for channel A 
Fixes #6445
 2017-04-25 23:14:16 -05:00
Scott Lahteine
2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine
ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
Scott Lahteine
f4685c28b7 Reorder Conditionals_post.h and add comments 2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine
ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine
ac96ae89f9 Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
Scott Lahteine
6a9b008044 Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
d6db7a9b03 patch "step_remaining" 2017-04-08 18:13:20 -05:00
Scott Lahteine
9217e4b8ec Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
Scott Lahteine
d1e6b0e21a Reduce STEP_PULSE_CYCLES code slightly 2017-03-24 00:50:05 -05:00
Roxy-3D
b8e4a6970b Get UBL up and running again 
All the changes to get the code into compliance with Marlin coding
standards made UBL sick.   This pretty much gets UBL back up and
running.
 2017-03-23 16:08:37 -05:00
Sebastianv650
bf57eb2447 Protect Babystepping against other ISRs 
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
 2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc Add MINIMUM_STEPPER_PULSE ability to babystepping 2017-03-21 17:50:38 +01:00
Scott Lahteine
45f949d833 TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00