MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,564 Commits 1 Branch 0 Tags 96 MiB
391386dd94
Commit Graph

2826 Commits

Author SHA1 Message Date
Scott Lahteine
350f239d84 Indent G0/G1 2015-05-22 17:31:24 -07:00
Scott Lahteine
672b0c1fd3 Cleanup pins in RAMPS_13_EFB boards 2015-05-22 16:20:54 -07:00
Scott Lahteine
15a2351675 No need for +1 on initial seen_pointer 2015-05-22 15:31:30 -07:00
Scott Lahteine
550dd87b2a Set seen_pointer before calling code_value 2015-05-22 15:11:48 -07:00
Scott Lahteine
38cc0b93c6 Merge pull request #1874 from AnHardt/Bulgarian 
Introduction of Bulgarian - language_bg.h
 2015-05-22 13:59:50 -07:00
Scott Lahteine
04a1622172 Merge pull request #2127 from Wackerbarth/Kossel_Pro 
Kossel Pro
 2015-05-21 18:43:26 -07:00
Scott Lahteine
81c2ca3e10 Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb 
Witbox and Hephestos are RAMPS EFB
 2015-05-21 18:39:02 -07:00
Scott Lahteine
f919a2fed1 Merge pull request #2134 from AnHardt/preheat-all 
Shift call of start_watching_heater() into setTargetHotend()
 2015-05-21 18:36:28 -07:00
Scott Lahteine
063881b5bd Fix a couple of doubled semicolons 2015-05-21 18:15:29 -07:00
AnHardt
94dff5b36a Merge pull request #2137 from thinkyhead/tweak_swh 
Move millis call in start_watching_heater
 2015-05-22 02:02:07 +02:00
Scott Lahteine
70d2f48d4e Merge pull request #2136 from thinkyhead/M303_suppress_error 
Suppress the line mismatch error after M303
 2015-05-21 16:46:30 -07:00
AnHardt
0c0ace2a04 Remove start_watching_heater() fom M104 and M109 2015-05-22 01:44:50 +02:00
Scott Lahteine
00716d0ca0 Small start_watching_heater adjustment 2015-05-21 16:44:49 -07:00
Scott Lahteine
834747deb7 Merge pull request #2135 from Wurstnase/new_endstop_bits 
new endstop bits
 2015-05-21 16:35:54 -07:00
Scott Lahteine
bde9c70d42 Suppress the line mismatch error after M303 2015-05-21 16:27:22 -07:00
Scott Lahteine
50bd7493cc Merge pull request #2108 from thinkyhead/m33_long_filename_host_support 
M33 LONG_FILENAME_HOST_SUPPORT
 2015-05-21 16:22:47 -07:00
Scott Lahteine
4d11b29959 Merge pull request #2113 from thinkyhead/command_sanitizer 
Command sanitizer
 2015-05-21 16:21:58 -07:00
wurstnase
ff98b8632b new endstop bits 2015-05-21 23:16:43 +02:00
AnHardt
9b0fa9c309 Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS 2015-05-21 21:07:37 +02:00
AnHardt
bc0764894a Shift call of start_watching_heater() into setTargetHotend() 
to warrant watching is set or reset.

Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
 2015-05-21 20:36:11 +02:00
Richard Wackerbarth
b878bc5620 Introducing the Kossel Pro Build Configuration 2015-05-21 11:47:34 -05:00
Richard Wackerbarth
1d8f61ca8a AT90USB is defined in pins.h 2015-05-21 11:46:54 -05:00
Richard Wackerbarth
735bf2d35f Describe Custom M Code 2015-05-21 08:06:33 -05:00
Scott Lahteine
f39658c822 M120 and M121 are reversed 2015-05-21 00:17:44 -07:00
Scott Lahteine
6eb4f90ce7 Also synchronize configurator copies of configs 2015-05-20 21:34:00 -07:00
Scott Lahteine
9d1961ebe3 Witbox and Hephestos are just RAMPS_13_EFB 2015-05-20 21:33:23 -07:00
AnHardt
4422365a53 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error 2015-05-20 23:34:39 +02:00
AnHardt
4113762062 Merge pull request #2130 from AnHardt/kill2 
Add a string parameter to kill()
 2015-05-20 23:32:51 +02:00
AnHardt
89d2ee6f13 Make output on display dependant of ULTRA_LCD 2015-05-20 22:03:16 +02:00
AnHardt
120d4c7a8c Merge remote-tracking branch 'origin/kill2' into _temp_error 2015-05-20 21:25:32 +02:00
AnHardt
cb6e82dc60 Change from kill() to kill(const char *) 
in temperature.cpp
 2015-05-20 21:22:48 +02:00
AnHardt
9d13942278 Use new kill() with parameter. 2015-05-20 21:18:52 +02:00
AnHardt
6398c5e28d Merge remote-tracking branch 'origin/kill2' into _temp_error 2015-05-20 21:08:19 +02:00
AnHardt
f4a93ed997 Add a string parameter to kill() 
Makes the output on the LCD adjustable.
 2015-05-20 20:53:48 +02:00
AnHardt
2990c6c45f Use new kill_() for _temp_error() 
instead of stop(). We really want to require a reset and no chance to set a new temperature.
 2015-05-20 14:03:14 +02:00
AnHardt
9b8c6ed254 Merge pull request #2120 from chris-bo/dogm_config 
move dogm font selection to configuration_adv.h
 2015-05-20 10:11:34 +02:00
AnHardt
06513565e9 Merge pull request #2105 from eboston/Development 
Add  ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
 2015-05-20 09:56:21 +02:00
Ed Boston
082ed3beed Propagate Configuration.h changes 
Updated all the example Configuration.h files for the new display type.
 2015-05-19 14:04:57 -07:00
Ed Boston
152b681bb5 Added link to controller github 
Added the link to the github information about the
ELB_FULL_GRAPHIC_CONTROLLER
 2015-05-19 04:14:55 -07:00
AnHardt
995b84944b Merge pull request #1982 from CONSULitAS/Development_Update_language.h 
language.h: update documentation / URL für K8200
 2015-05-19 12:13:35 +02:00
Scott Lahteine
7bc5fd8193 Merge pull request #2123 from AnHardt/Duemilanove 
Remove Duemilanove
 2015-05-18 20:36:05 -07:00
Scott Lahteine
94de1e0d93 Merge pull request #2116 from AnHardt/wording 
transpire -> expire
 2015-05-18 20:34:46 -07:00
AnHardt
4d4fa3607b Remove Duemilanove 
No way to fit Marlin into 32K.
 2015-05-19 02:46:37 +02:00
AnHardt
e353d27430 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian 2015-05-18 23:56:53 +02:00
Ed Boston
ca8d1756d5 Define fixes 
Fixed a couple defines that were not changed or commented out.
 2015-05-18 14:23:31 -07:00
CONSULitAS
b96b28b7cc language.h: update documentation for LANGUAGE_INCLUDE 
language.h: update documentation for LANGUAGE_INCLUDE

@thinkyhead What do you think? I think there should be a warning like
this.
 2015-05-18 23:11:26 +02:00
Christian Bohn
258bcdefe0 move dogm font selection to configuration_adv.h 2015-05-18 22:54:53 +02:00
AnHardt
7750180c93 transpire -> expire 
Minor wording correction.
 2015-05-18 21:48:10 +02:00
AnHardt
70163dafb9 Use _temp_error() for all errors thrown by different mechanisms 
Now ending in an endless loop.
Tidy up the output format.
We now get:
ERRORTEXT ", system stopped! Heater_ID: " HEATERID

Where ERRORTEXT can be:
"Heating failed"
"Thermal Runaway"
"MAXTEMP triggered"
"MINTEMP triggered"
and soon
"Thermal Jump"

HEATERID can be
0, 1, 2 ,3 , "bed"

This messages are always followed by the common:
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
 2015-05-18 20:26:25 +02:00
Scott Lahteine
a0f362c735 Simplify & optimize with current_command_args 2015-05-18 07:08:04 -07:00
Scott Lahteine
adc8fcb77f More parser comments, optimize code_seen, save with goto 2015-05-18 07:08:04 -07:00
Scott Lahteine
c6d8dd19d9 use fetched value 2015-05-18 07:08:04 -07:00
Scott Lahteine
1116e13f5a Further optimization of command parser 2015-05-18 07:08:03 -07:00
Scott Lahteine
3a4c3ab76e Pre-sanitize the command before handling 
- Use a global pointer for the current sanitized command
- Pre-sanitize the current command to bypass `N` and nullify `*`,
removing the need for handlers to bypass, ignore, or nullify these
parts, and reducing overhead for `code_seen`, etc.
- Pre-skip leading whitespace.
- Only look for G, M, T codes at the start of the command.
- Verify that G, M, T codes are followed by command codes.
 2015-05-18 07:06:51 -07:00
Ed Boston
a83bf18ee1 More functional seperation 
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
 2015-05-18 05:37:46 -07:00
AnHardt
97ca1b3f4d Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE 
to make it better findable.
 2015-05-18 14:15:29 +02:00
Scott Lahteine
0f2c9bacfd M33 LONG_FILENAME_HOST_SUPPORT 2015-05-17 17:36:32 -07:00
Scott Lahteine
3feaef6526 Have G92 set the nozzle position on Delta and SCARA 2015-05-17 17:08:05 -07:00
Ed Boston
047e688e93 Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER 
Rename of define to avoid confusion between the controller and the
display which had similar names.
 2015-05-17 15:23:17 -07:00
Ed Boston
1999ac415c Formatting Changes 
Fixes for some code formatting changes and commenting out the
ADAFRUIT_ST7565 define that was left defined.
 2015-05-17 13:39:24 -07:00
Ed Boston
41f8cdb3a6 ADAFRUIT_ST7565 
Added support for new display type
 2015-05-17 12:47:41 -07:00
wurstnase
21ff773832 rework out_bits 2015-05-17 14:33:09 +02:00
Scott Lahteine
6c27eaf864 Merge pull request #2101 from thinkyhead/code_style 
Code style and a dangling "else"
 2015-05-17 03:39:08 -07:00
Scott Lahteine
d580a0d186 Use "+=" in plane rotation 2015-05-17 01:51:14 -07:00
Scott Lahteine
2f3a410cb0 Fix a potential hanging "else" bug 2015-05-17 01:50:30 -07:00
Scott Lahteine
b83e3f0905 Combine "Bed X: " strings 2015-05-17 01:49:52 -07:00
Scott Lahteine
7dfb8becdb Adjust some names and types in Marlin_main.cpp 2015-05-17 01:48:51 -07:00
Scott Lahteine
c966aa26ff Comments in Marlin_main.cpp 2015-05-17 01:47:53 -07:00
Scott Lahteine
c54a2ea042 Adjust spacing in Marlin_main.cpp and stepper.* 2015-05-17 01:47:02 -07:00
Scott Lahteine
072625ccad Update headings in Marlin_main.cpp and stepper.cpp 2015-05-17 01:44:53 -07:00
Scott Lahteine
16032f149f Rename to codenum as a consistency 2015-05-16 23:17:35 -07:00
Scott Lahteine
273a4a253f Merge pull request #2096 from thinkyhead/cherry_picking3 
Hide M117 with no LCD
 2015-05-16 21:10:28 -07:00
Scott Lahteine
64825a3d1e Merge pull request #2095 from thinkyhead/cherry_picking2 
Add gcode_line_error to reduce code size
 2015-05-16 21:09:15 -07:00
Scott Lahteine
ca79282eaf Hide M117 with no LCD 2015-05-16 20:59:04 -07:00
Scott Lahteine
ce218cafdb Add gcode_line_error to reduce code size 2015-05-16 20:54:58 -07:00
Scott Lahteine
46d59784ad Rename preocess_command to process_next_command 2015-05-16 20:47:40 -07:00
Scott Lahteine
513077c317 Minor change to fan kick 2015-05-16 19:42:28 -07:00
Scott Lahteine
76438195f0 NO_TIMEOUTS and ADVANCED_OK off by default 2015-05-16 02:47:20 -07:00
Scott Lahteine
d2563804c8 Add LF to file errors 2015-05-15 04:37:22 -07:00
Scott Lahteine
e114662cfa Adjust SdBaseFile spacing 2015-05-15 03:23:49 -07:00
Scott Lahteine
98e91f5253 Allow lsDive to recurse with minimal stack usage 2015-05-15 03:19:07 -07:00
Scott Lahteine
19166a92e4 Merge pull request #2057 from Wurstnase/serial_wait 
add plan buffer remaining for 'P' and block buffer remaining 'B'
 2015-05-14 04:57:08 -07:00
Scott Lahteine
95f5a68006 Merge pull request #2074 from thinkyhead/lcd_xyz_unknown 
Display unknown XYZ on the LCD as "---"
 2015-05-14 04:56:38 -07:00
Scott Lahteine
e97fcafd0e Merge pull request #2076 from thinkyhead/mendel_inverting 
Use MSG_OK in M105
 2015-05-14 04:54:11 -07:00
Scott Lahteine
0f6cd3640b Drop extraneous ok_to_send 2015-05-14 04:38:09 -07:00
Scott Lahteine
0ce355d9e7 Use MSG_OK in M105 2015-05-14 03:33:38 -07:00
Scott Lahteine
a366e57385 Merge pull request #2075 from thinkyhead/mendel_inverting 
Use Mendel default for INVERT_Y_DIR
 2015-05-14 03:29:24 -07:00
Scott Lahteine
7b3acfbb6f Merge pull request #2072 from thinkyhead/better_arc_code 
Consolidate arc code, remove motion_control.*
 2015-05-14 00:27:22 -07:00
Scott Lahteine
78beef2d73 Use Mendel default for INVERT_Y_DIR 2015-05-14 00:25:47 -07:00
Scott Lahteine
1a4a09c26f Display unknown XYZ on the LCD as "---" 
- Also show 2 digits past decimal for Z on DOGM
 2015-05-13 22:45:58 -07:00
Scott Lahteine
68ce419147 Note on segment size 2015-05-13 19:11:36 -07:00
Scott Lahteine
8b92249f18 Bring arc_offset into auto scope 2015-05-13 19:00:46 -07:00
Scott Lahteine
80807b2d71 Consolidate arc code, remove motion_control.* 2015-05-13 18:52:41 -07:00
Scott Lahteine
f65833931d Formatting tweaks 2015-05-13 02:02:19 -07:00
Scott Lahteine
fcfd99c1ae Add comments to lcd_control_temperature_menu 2015-05-12 18:46:16 -07:00
Scott Lahteine
d693e0f378 Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit 2015-05-12 18:30:38 -07:00
Scott Lahteine
6697a8f375 Watch the heater a little longer 2015-05-12 18:22:47 -07:00
Scott Lahteine
5693a6e3c9 Fix heating error message 2015-05-12 18:17:13 -07:00
Scott Lahteine
747fd5801c Merge pull request #2055 from thinkyhead/thermal_unified 
Combine thermal runaway and watch-period
 2015-05-12 08:04:29 -07:00
Scott Lahteine
6e5572228d Merge pull request #2064 from thinkyhead/wait_before_g28 
Split up prepare_move by type
 2015-05-12 07:53:11 -07:00
Scott Lahteine
27ad381e25 Allow fractional seconds in G4 and M0 2015-05-12 07:52:08 -07:00
Scott Lahteine
5146694452 Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller 
Feature: Add RAMPS CNC Controller Board
 2015-05-12 04:31:49 -07:00
Scott Lahteine
b2bd9aae7c SCARA_SEGMENTS_PER_SECOND 2015-05-12 04:18:15 -07:00
Scott Lahteine
bd20bd5444 Merge pull request #2063 from chris-bo/autobed_sled 
improve sled handling
 2015-05-12 03:29:21 -07:00
Scott Lahteine
9e95ceb3fc Split up prepare_move by type 
- For better encapsulation add inlines for each prepare_move type
- Move controllerFan vars inside the function as statics
- Some formatting cleanup
- Rename `ClearToSend` as `ok_to_send`
 2015-05-12 02:08:20 -07:00
Scott Lahteine
9ba8cf5fe3 Merge pull request #2061 from thinkyhead/wait_before_g28 
Always do st_synchronize() before G28
 2015-05-12 02:05:30 -07:00
Scott Lahteine
873f7d6f2a Check that configs are up-to-date 2015-05-12 01:33:51 -07:00
Christian Bohn
f48599f172 add pin definition to some motherboards 2015-05-12 10:02:23 +02:00
Scott Lahteine
b5200e184c Remove extra setup_for_endstop_move 2015-05-12 01:01:53 -07:00
Scott Lahteine
8d814de558 Return void in prevent_dangerous_extrude 2015-05-12 00:55:00 -07:00
Scott Lahteine
367e2eb9f4 Global setup_for_endstop_move 2015-05-12 00:51:22 -07:00
Wurstnase
1d5677cc3b add missing Z-bits 2015-05-12 09:36:19 +02:00
Wurstnase
df12e68e7d add missing Z_PROBE-bit 2015-05-12 09:33:24 +02:00
Scott Lahteine
fa951f8a0b Always do st_synchronize() before G28 2015-05-12 00:31:51 -07:00
Christian Bohn
27a3b1d895 disable sled pin by default 2015-05-12 08:51:01 +02:00
Christian Bohn
fb44b53ae3 sled improvements 
- create sled pin definition
- G28 Works with sled
 2015-05-11 23:22:19 +02:00
Wurstnase
46d1932380 add plan buffer remaining for 'P' and block buffer remaining 'B' 2015-05-11 13:04:00 +02:00
Scott Lahteine
429c6ccad2 Neaten config formatting 2015-05-10 23:27:00 -07:00
Scott Lahteine
8a0dc4d54a Merge pull request #1922 from Wurstnase/serial_wait 
Serial wait
 2015-05-10 23:10:25 -07:00
Scott Lahteine
8332a15899 Fix testing of runaway options in temperature.cpp 2015-05-10 23:03:24 -07:00
Wurstnase
526ad82d20 activate advanced_ok and no_timeout 2015-05-11 08:01:51 +02:00
Scott Lahteine
2b92b01afc Fix typo in SanityCheck.h 2015-05-10 22:58:37 -07:00
Scott Lahteine
2445ae3d3a Combine thermal runaway and watch-period 
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
 2015-05-10 22:52:01 -07:00
Scott Lahteine
4097207c75 Merge pull request #2041 from thinkyhead/watch_temp 
More thermal protection
 2015-05-10 21:39:05 -07:00
Scott Lahteine
45d64040fe Merge pull request #2048 from Wurstnase/hit_bits 
replace some bools
 2015-05-10 20:37:17 -07:00
Scott Lahteine
9b3d4380d3 Only watch the heater that was set 2015-05-10 20:26:45 -07:00
Scott Lahteine
52c0696e44 Merge pull request #2044 from thinkyhead/fix_servos_too 
Make some z probe and servo code tweaks
 2015-05-10 20:10:42 -07:00
Wurstnase
b55f32f8a1 replace some bools 
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
 2015-05-10 21:37:39 +02:00
Laurent DELAGE
e70e6e2b48 Correction traductions 2015-05-10 15:38:50 +02:00
Scott Lahteine
f73f4ce555 Make some z probe and servo code tweaks 2015-05-09 19:11:19 -07:00
Scott Lahteine
28c87ec81b Disable all heaters on temp error 2015-05-08 23:17:25 -07:00
Scott Lahteine
79106638a8 Fix documentation of heating sanity check 2015-05-08 22:50:08 -07:00
Scott Lahteine
6110494a56 Change default to 4°C in 16s 2015-05-08 22:41:12 -07:00
Scott Lahteine
54deb9eea3 Enable WATCH_TEMP_PERIOD by default 2015-05-08 22:36:02 -07:00
Scott Lahteine
deedb00c18 Document WATCH_TEMP_PERIOD 2015-05-08 22:25:51 -07:00
Scott Lahteine
be77cfd895 Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper 
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
 2015-05-08 20:32:30 -07:00
Scott Lahteine
cb4ea75fab Support for MKS BASE 1.0 board 2015-05-08 19:07:37 -07:00
Scott Lahteine
0e70511381 Merge pull request #2036 from brupje/mainline 
Fixes for reprapworld's keypad
 2015-05-08 18:19:31 -07:00
Wurstnase
0cb87795a3 advanced 'ok' 
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.

Some pseudo code:
If (bufferremaining > 0)  send command
## as long there is free buffer send command

Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
 2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9 Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait 2015-05-08 21:27:18 +02:00
brupje
d1148a0198 Rename Configuration_megatronics.h to Configuration.h 2015-05-08 14:36:23 +02:00
Scott Lahteine
7f3252eea9 Merge pull request #1999 from paclema/Filrunout_configurable_script 
Added configurable script for filrunout from configuration.h
 2015-05-08 04:39:59 -07:00
Scott Lahteine
181ccc884c Edit thermal runaway description 2015-05-07 20:46:03 -07:00
Wurstnase
073e4af7e2 We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver. 2015-05-07 18:55:47 +02:00
brupje
b7fcb11580 Added example configuration for Megatronics 2015-05-07 13:18:05 +02:00
brupje
8f8174dc93 Revert "Default configuration for megatronics." 
This reverts commit 22e0d2afcb.
 2015-05-07 13:12:17 +02:00
Scott Lahteine
79633a74ab Fix MBL compile error 2015-05-06 14:25:13 -07:00
brupje
ba9741139e Clean up pins file for megatronics 2015-05-05 14:01:52 +02:00
brupje
22e0d2afcb Default configuration for megatronics. 2015-05-05 14:01:20 +02:00
brupje
816aa19861 Up/down buttons were reversed, swapped the assignments 2015-05-05 13:04:46 +02:00
brupje
df4d50579a This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway. 2015-05-05 12:47:24 +02:00
brupje
8f8bf3a897 Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented 2015-05-05 11:03:20 +02:00
Scott Lahteine
777f2d3820 Merge pull request #2018 from fmalpartida/bugFixing 
Bug corrected: persistent HOMING message when HOME button pressed for homing.
 2015-05-05 00:12:32 -07:00
Scott Lahteine
ecb46de349 Merge pull request #2013 from bq/Fix_lowercase 
Fixed lowercase change missing on commit a22a228b.
 2015-05-04 23:50:56 -07:00
fmalpartida
150a35eff8 Bug corrected: 
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
 2015-05-04 19:48:49 +02:00
Gina Häußge
ab246ab032 Reverting changes to error messages on serial console 
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
 2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera
59529b755d Fixed lowercase change missing on commit a22a228b. 
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
 2015-05-04 09:44:34 +02:00
Scott Lahteine
df4c104637 Merge pull request #2012 from BrianGilbert/Development 
Add example configuration for Boots Industries V2.5 Delta Printer
 2015-05-03 20:42:32 -07:00
Scott Lahteine
1f039cde61 Merge pull request #1992 from thinkyhead/too_many_probes 
Stow Z probe on M402 without extra raise
 2015-05-03 20:40:26 -07:00
Brian Gilbert
1285784a49 Add Boots Industries V2.5 example configuration 2015-05-04 09:10:42 +10:00
Scott Lahteine
35493e1af9 Tweak to planner.cpp position.debug 2015-05-03 16:03:05 -07:00
paclema
26015b02d8 Fixed typo and updated Configuration.h of configurator 2015-05-03 02:39:34 +02:00
paclema
aedd580911 Updated all configuration.h examples 2015-05-03 02:28:43 +02:00
Scott Lahteine
2c892fca6a Cleanup of language.h 2015-05-01 21:38:32 -07:00
Scott Lahteine
2db384a21d Fix compile error in configuration_store.cpp 2015-05-01 21:15:26 -07:00
Scott Lahteine
ca8cec8e8a Merge pull request #1998 from paclema/Filament_runout_fix 
Fixed sintaxis error of filament runout
 2015-04-29 19:53:25 -07:00
Scott Lahteine
425cd46c12 Merge pull request #1993 from AnHardt/TRP-bed 
Enable TRP for the bed
 2015-04-29 19:44:50 -07:00
Scott Lahteine
d4c74b8f8c Don't apply M428 if an error occurs 
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
 2015-04-29 19:05:48 -07:00
Scott Lahteine
d065d37822 Add M428 to set home_offset logically 2015-04-29 18:26:16 -07:00
paclema
013a09dbe6 Added configurable script for filrunout form configuration.h 2015-04-29 21:38:40 +02:00
paclema
4dcc0fd55a Fixed sintaxis error of filament runout 2015-04-29 21:32:27 +02:00
AnHardt
514d8ac460 Enable TRP for the bed 
in all Configurations.
 2015-04-29 08:47:01 +02:00
Scott Lahteine
ce3caf447b Tweak how homeaxis deploys and stows 2015-04-28 19:17:48 -07:00
Scott Lahteine
a235dca79c Stow z on M402 without extra raise 2015-04-28 19:10:07 -07:00
Scott Lahteine
2610b8d047 Enable thermal runaway protection by default 2015-04-28 17:40:29 -07:00
AnHardt
b4b19a6cbd Merge https://github.com/MarlinFirmware/Marlin into Bulgarian 
Conflicts:
	Marlin/Configuration.h
	Marlin/configurator/config/Configuration.h
	Marlin/example_configurations/Felix/Configuration.h
	Marlin/example_configurations/Felix/Configuration_DUAL.h
	Marlin/example_configurations/Hephestos/Configuration.h
	Marlin/example_configurations/K8200/Configuration.h
	Marlin/example_configurations/SCARA/Configuration.h
	Marlin/example_configurations/WITBOX/Configuration.h
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/example_configurations/makibox/Configuration.h
	Marlin/example_configurations/tvrrug/Round2/Configuration.h

Conflicts with my Chinese implementation resolved.
 2015-04-28 09:24:32 +02:00
Scott Lahteine
7548a56f64 Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO 
Add pin configuration for Brainwave Pro
 2015-04-27 23:13:26 -07:00
Scott Lahteine
02acf0641a Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h 
language_de.h: updated translation and minor typos
 2015-04-27 22:45:24 -07:00
Scott Lahteine
a120bf3fe4 Latest upstream commits 2015-04-27 22:40:19 -07:00
Scott Lahteine
3688256f86 Merge pull request #1974 from thinkyhead/eeprom_in_gcode 
Make EEPROM reproducible in GCode
 2015-04-27 22:35:41 -07:00
Scott Lahteine
ae53b3cdc3 Fix the M303 S-1 report text 2015-04-27 22:25:00 -07:00
Scott Lahteine
c1fbef1722 Merge pull request #1988 from thinkyhead/bye_string_url 
Remove obsolete STRING_URL
 2015-04-27 22:12:05 -07:00
Scott Lahteine
31516e2a3b Merge pull request #1985 from Arengorn/Development 
Update of servo.h
 2015-04-27 22:10:02 -07:00
Scott Lahteine
185f8a0a66 Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config 
Example Configuration for K8200: comments/URL/readme
 2015-04-27 21:59:56 -07:00
Scott Lahteine
0970102950 Remove obsolete STRING_URL 2015-04-27 21:59:14 -07:00
Scott Lahteine
0f687b5dda Merge branch 'Development' into eeprom_in_gcode 
Latest upstream commits
 2015-04-27 21:47:47 -07:00
Scott Lahteine
28aef684b4 Merge pull request #1957 from Voxel8/sjk/home_y_before_x 
Allow Y to home before X with option in Configuration_adv.h.
 2015-04-27 21:41:14 -07:00
Scott Lahteine
c1dd9bda7f Merge pull request #1987 from thinkyhead/fix_homing_zpos 
Disable endstops between homing bumps
 2015-04-27 21:16:47 -07:00
Scott Lahteine
71a0b1a5bb Disable endstops between homing bumps 2015-04-27 21:14:30 -07:00
Scott Lahteine
8c28e36e75 Merge pull request #1986 from thinkyhead/fix_homing_zpos 
Fix homing Z position
 2015-04-27 20:58:14 -07:00
Scott Lahteine
c36226c4dc Fix homing Z position 
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
 2015-04-27 20:55:19 -07:00
Scott Lahteine
2bc1d70a31 Merge pull request #1977 from AnHardt/Cinese2 
We mark this historic day, when Marlin went to China.
 2015-04-27 20:37:00 -07:00
Scott Lahteine
ff178d8cf7 Change M421 to take coordinates 
This makes `M421` more amenable for irregular matrices
 2015-04-27 19:48:34 -07:00
Bernardo
e449659338 Update Servo.cpp 
Updated "servo.h" to "Servo.h"
 2015-04-27 23:30:11 -03:00
Bernardo
ff67ee73fc Update Marlin_main.cpp 
Corrected "servo.h" to "Servo.h" because of the updated filename.
 2015-04-27 23:29:16 -03:00
Scott Lahteine
5b248757c7 Level Bed in Prepare submenu 
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
 2015-04-27 19:11:25 -07:00
CONSULitAS
c5dfb35597 language_de.h: updated translation and minor typos 
language_de.h: updated translation and minor typos
 2015-04-28 01:03:54 +02:00
CONSULitAS
6423fe7601 language.h: update documentation / URL für K8200 
language.h: update documentation for LANGUAGE_INCLUDE
language.h: URL für K8200 github repository
 2015-04-28 01:01:57 +02:00
CONSULitAS
6af40e9dc0 K8200 example Configuration.h: STRING_URL removed 
K8200 example Configuration.h:
* STRING_URL removed: like proposed by thinkyhead in #1917
 2015-04-27 23:59:10 +02:00
CONSULitAS
d1c1f766d5 Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST 
Conflicts:
	Marlin/example_configurations/K8200/Configuration.h
 2015-04-27 23:54:47 +02:00