MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
844 Commits 1 Branch 0 Tags 96 MiB
3a6abe1d6e
Commit Graph

844 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
daid
af78d0cbfa Merge pull request #1 from illuminarti/Fix_E_Speed 
Fix step rate bug (especially for retraction)
 2013-03-18 23:36:11 +01:00
Dirk Eichel
9a78f321a4 Add pins for Motherboard variant 64 
These definition contain also the definition for the graphics LCD.
 2013-03-18 23:36:11 +01:00
Dirk Eichel
5de25ccd20 Add Motherboard variant 64 - STB V1.1 
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
 2013-03-18 23:36:10 +01:00
daid
d6ce63c49c Merge pull request #411 from STB3/Marlin_w_STB_Board_support 
Add STB board support to Marlin (next step towards graphic LCD implementation)
 2013-03-18 07:57:39 -07:00
Ketil Froyn
f036be7c4e Clean up tab/whitespace from last commit 2013-03-16 23:11:58 +01:00
Ketil Froyn
07e11c7cf5 Add command M928 to enable logging to file of received gcode commands 2013-03-16 23:02:57 +01:00
daid
92782f9252 Merge pull request #1 from illuminarti/Fix_E_Speed 
Fix step rate bug (especially for retraction)
 2013-03-15 09:07:34 +01:00
whosawhatsis
6a61a3c0b4 missing comma in last commit 2013-03-08 16:15:49 -08:00
whosawhatsis
f0aee4101a regenerated thermistor table 7 
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
 2013-03-08 13:41:49 -08:00
Dirk Eichel
140e095c6e Add pins for Motherboard variant 64 
These definition contain also the definition for the graphics LCD.
 2013-03-01 17:47:32 +01:00
Dirk Eichel
b2c1c64fb1 Add Motherboard variant 64 - STB V1.1 
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
 2013-03-01 17:39:54 +01:00
Dirk Eichel
ceb5ee38af Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin 2013-03-01 17:27:57 +01:00
Dirk Eichel
8efd4cfd73 fixed merge conflict 2013-03-01 16:27:35 +01:00
daid
b3ebb71704 Merge pull request #408 from STB3/Marlin_with_ATmega1284p_Sanguino_on_023_support 
Marlin with ATmega1284p sanguino support under Arduino 023
 2013-03-01 06:08:18 -08:00
Dirk Eichel
f991bf23b2 Add bootloader files for ATmega1284/Sanguino 
Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
 2013-02-27 22:34:36 +01:00
Dirk Eichel
5bfba7720e Switched to Sanguino 0023r4 
This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.

Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=
 2013-02-27 22:29:46 +01:00
Dirk Eichel
a069d30a4b Add additional Sanguino bard versions to boards.txt 
ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
 2013-02-27 22:17:42 +01:00
daid303
4eb81a69e6 Only compile the new extruder offset code if you have multiple extruders. 2013-02-27 12:32:07 +01:00
daid
3e9cd334a4 Merge pull request #383 from dob71/jeff 
Hotend offset handling for multi-extruder machines
 2013-02-27 03:10:18 -08:00
daid303
de3dec7215 Also show the tune menu when USB printing. 2013-02-20 00:54:44 +01:00
Denis Bakin
73d41c10b9 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff 
Conflicts:
	Marlin/language.h
	Marlin/thermistortables.h
 2013-02-18 12:10:52 -05:00
daid
63da4dc59a Merge pull request #398 from DanieleSdei/Marlin_v1 
Marlin v1, alignment of the Italian language
 2013-02-16 15:41:43 -08:00
daid
7eb9811958 Merge pull request #397 from codenamepawel/patch-1 
Update Marlin/language.h
 2013-02-16 15:41:07 -08:00
Daniele Sdei
82e28851bd Italian language: SD-Card change and SD-Card init 2013-02-16 12:17:29 +01:00
Daniele Sdei
aed5965ad8 Italian language: remove space and some fix 2013-02-16 12:14:50 +01:00
codenamepawel
d360846dd4 Update Marlin/language.h 
Update Polish language 	#define MSG_RESUMING "Wznawiam drukowanie"
 2013-02-16 03:42:53 +01:00
daid303
2f60e324dc Fixed #394 2013-02-14 14:04:26 +01:00
daid
5e2abfcdcd Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu 
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
 2013-02-13 08:56:00 -08:00
daid
fa5c45f515 Merge pull request #392 from mfeherpataky/Marlin_v1 
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-02-13 08:54:58 -08:00
Dirk Eichel
a0d4e8e78e Add Messages for SD Card init. & change 2013-02-13 10:05:18 +01:00
mfeherpataky
bbf0cc1379 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
 2013-02-12 20:06:51 +01:00
Dirk Eichel
c8f1fbd9d8 Add SD-Card change and SD-Card init. 
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
 2013-02-12 17:35:46 +01:00
daid
be91fb9b47 Merge pull request #389 from mfeherpataky/Marlin_v1 
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-02-12 07:56:15 -08:00
mfeherpataky
71ddb8dc60 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Use all available characters in narrow LCDs < 20 characters.
 2013-02-12 00:03:40 +01:00
mfeherpataky
d2c547c407 Update Marlin/ultralcd_implementation_hitachi_HD44780.h 
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
 2013-02-11 23:25:24 +01:00
Denis B
70871715e4 Added support for extruder offset handling 
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
 2013-02-04 23:05:45 -05:00
Denis B
49b2ddc8c1 Cleaned up non-standard characters 2013-02-04 01:41:40 -05:00
Bernhard Kubicek
f8876a7958 Merge pull request #376 from kintel/skip_longfilenames 
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
 2013-02-03 03:05:31 -08:00
daid
18fcc367d2 Merge pull request #371 from Banjer/Melzi_LED_PIN 
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
 2013-02-02 03:23:43 -08:00
daid
6b78edf7c5 Merge pull request #374 from kintel/quickstop 
compile fix: quickStop() needs stepper.h
 2013-02-01 13:54:12 -08:00
Bas Spaans
19ce90fe02 Added comment about M42 usage (clean) 2013-01-31 18:20:23 +01:00
Bas Spaans
00fed0a703 Revert "Extended comment explaining M42 usage" 
This reverts commit 01541ee64c.
 2013-01-31 18:11:13 +01:00
Marius Kintel
e06d820909 Also skip .files and _files with long filenames 2013-01-31 12:07:42 -05:00
Bas Spaans
01541ee64c Extended comment explaining M42 usage 2013-01-31 18:00:25 +01:00
Marius Kintel
f24f02e212 compile fix: quickStop() needs stepper.h 2013-01-31 10:43:03 -05:00
Bas Spaans
12c41423ad Fixed typo in comment 2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492 Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries 2013-01-30 22:25:01 +01:00
Bernhard
1d06b10962 Added a feature to have filament change by gcode or display trigger. 
[default off for now]
syntax: M600  X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]

if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.

You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
 2013-01-27 13:21:34 +01:00
daid303
408b349a84 Fixed #368. Commented out the wrong pin definition, but explained why it is there. 2013-01-21 15:46:17 +01:00
daid
236bb2c110 Merge pull request #365 from DanieleSdei/Marlin_v1 
Marlin v1, italian MSG_RESUMING and RepRapPro thermistor tables.
 2013-01-14 08:29:55 -08:00