Commit Graph

6314 Commits

Author SHA1 Message Date
Bob-the-Kuhn
7ce613db0a Fix Conditionals test for endstop plug used by Z2 or probe. 2017-05-02 15:41:47 -05:00
Scott Lahteine
ef750ae86b Towards supporting Z2 in Endstops::report_state 2017-05-02 15:39:32 -05:00
Scott Lahteine
c03c623951 Sanity-check Z2 endstop assigned to a nonexistent pin. 2017-05-02 15:39:00 -05:00
Scott Lahteine
70f31b6c76 Throw an error if no E stepper is free for X2, Y2, Z2 2017-05-02 15:13:47 -05:00
Scott Lahteine
ac69eca586 Merge pull request #6538 from bgort/ubl_gridlbls
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1 Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c Fix Horizontal and Vertical UBL optimization bug. (#6540)
* Fix Horizontal and Vertical optimization bug.

And drastically reduce the debug code foot print....

* Yeah Baby!

The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367 Patches for leveling reactivation in G28 / M48 2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2 Fix, cleanup, prettify G29 O output 2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7 Tweak set_bed_leveling_enabled 2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3 Adjust leveling conditionals 2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce Clean up G26 external references, private vars 2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788 Add a function to home all axes (i.e., gcode_G28) 2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01 Merge pull request #6530 from thinkyhead/rc_cleanups_2
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938 Fixes for DUAL_NOZZLE_DUPLICATION_MODE 2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966 Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
4803a4322e Revert "Fix for Meshpositions if printer has negative endstop positions" 2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4 Patch for BLTOUCH_HEATERS_OFF 2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29 Patch for missing DELTA_HEIGHT 2017-05-01 11:05:35 -05:00
Scott Lahteine
d814e468d2 Fix set_heaters_for_bltouch and usage
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a Various fixes for compiler warnings
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749 Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59 cardreader.cpp spacing tweak 2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f Cleanup spacing in pinsDebug.h 2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717 Remove things that aren't pins from pinsDebug_list.h 2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08 Resolve compiler complaint about memset volatile * 2017-04-30 22:24:03 -05:00
Scott Lahteine
0b421e97c9 Rename some (unused) OMCA pins 2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e Patch newly-introduced bug in IS_Z2_OR_PROBE 2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d Cleanups to pins debugging 2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f Use new serial spacing function to save PROGMEM 2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7 Cleanups to UBL code 2017-04-30 20:14:42 -05:00
jaysonkelly
769817ce5e Need to define this for Rigidboard V2
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b Merge pull request #6416 from SkyNet3D/negative-mesh-fix
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a Merge pull request #6509 from thinkyhead/rc_config_patches
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE 2017-04-30 16:01:01 -05:00
Scott Lahteine
54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6 Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1 Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507) 2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604 Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc Merge pull request #6508 from bgort/pio_improvements
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8 little oops 2017-04-30 22:17:49 +03:00
Brian
627730948d Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168 change G26 default nozzle size to 0.4, consistent with instructions (#6506) 2017-04-30 13:23:46 -05:00
LVD-AC
471a321624 leaner code for probe routine 2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1 allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505) 2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a Correct over optimization of pre-initialized variables (#6500)
* Correct over optimization of pre-initialized variables

NEAR_ZERO() works most of the time...  But it leaves corner cases
uncovered.  We need to explicitly check if these variables are +/-
infinity.

* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00