Scott Lahteine
55acb65e27
Updates for stepper parity with 2.0.x
...
Matching changes from #8725
2017-12-08 23:07:52 -06:00
Scott Lahteine
77519e9f14
Tweaks to planner.h
2017-12-08 21:11:17 -06:00
AnHardt
22baf3356a
Apply @AnHardt reverse_pass changes
...
Plus: 3 times 2 float / to 1 float / and 2 float *
and, reciprocal is an optimized operation
2017-12-08 21:11:17 -06:00
Bob-the-Kuhn
360c553228
Merge pull request #8718 from Bob-the-Kuhn/1.1x-planner-speed-improvemenr
...
[bugfix-1.1.x] minor planner.cpp speed improvement (follow up to COREXY stutter changes PR #8697 )
2017-12-08 18:40:41 -06:00
Scott Lahteine
b4d69527e6
Followup to #8716
2017-12-08 18:18:06 -06:00
Scott Lahteine
4aba382b01
Merge pull request #8715 from thinkyhead/bf1_followup_8713
...
Followup to #8713
2017-12-08 18:14:57 -06:00
Bob-the-Kuhn
6f38814541
speed improvement
2017-12-08 18:02:57 -06:00
Scott Lahteine
7251850028
Followup to #8713
...
Fix indentation, use min for constraint, remove obsolete error check
2017-12-08 17:52:44 -06:00
Scott Lahteine
6eb268f63f
Remove old UBL description text
2017-12-08 17:52:44 -06:00
Jonathan Barchi
ae547c3044
Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI
2017-12-08 15:33:24 -08:00
Roxy-3D
23dd2cb6e7
Better off mesh behavior for UBL ( #8713 )
...
* Better off mesh behaviour for UBL
* Spacing changes...
2017-12-08 16:36:03 -06:00
Scott Lahteine
8385cddd8d
Followup to #8705
2017-12-08 03:48:24 -06:00
Scott Lahteine
75eb93140f
Discard all CONTINUED blocks on interrupted move
2017-12-08 02:13:51 -06:00
Scott Lahteine
8be7a0b131
FORCE_INLINE before static
2017-12-08 01:31:59 -06:00
Scott Lahteine
cd6468d6de
Fix TEMP_BED_PIN for Mightyboard Rev.E
...
Based on #8685
2017-12-07 21:52:43 -06:00
Scott Lahteine
822254291f
Merge pull request #8702 from bjarchi/fix-1.1.x-probe_bounds
...
Fix - Conditionals_post.h - allow overriding of [min,max] probe point
2017-12-07 21:49:04 -06:00
Scott Lahteine
44800e9899
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 16:46:06 -06:00
Scott Lahteine
6e85c060a9
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:18:53 -06:00
Jonathan Barchi
7c6d33b0d2
Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected
2017-12-07 10:40:32 -08:00
Bob-the-Kuhn
86b65e52c4
[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) ( #8697 )
2017-12-07 00:08:48 -06:00
Scott Lahteine
6310a00d7e
feed_factor => inverse_secs
2017-12-06 23:02:37 -06:00
Scott Lahteine
6b93d20e4e
Sanity-check skew+UBL
2017-12-06 22:56:20 -06:00
Scott Lahteine
909fac6d90
Update commentary on M48
2017-12-06 22:50:13 -06:00
Scott Lahteine
1951d3a37a
Simplify G26 user_canceled
2017-12-06 22:03:46 -06:00
Scott Lahteine
aa7236e03c
Shorten error text in ubl::G29
2017-12-06 21:43:26 -06:00
Scott Lahteine
574153a810
No lcd_map_control needed in quick_stop
2017-12-06 21:43:26 -06:00
Scott Lahteine
3b30cc90f1
Clean on trigger instead of split_first_move flag
2017-12-06 21:43:26 -06:00
Scott Lahteine
1063b3b2b8
Changes for parity with 2.0.x
2017-12-06 21:19:17 -06:00
Scott Lahteine
93560836de
Allow buffer clean without release command
2017-12-06 21:12:55 -06:00
Scott Lahteine
ff26b7446c
Standardize LCD interface code for UBL a little
2017-12-06 21:12:55 -06:00
Scott Lahteine
7b6ad28a5d
General UBL/G26 code cleanup
2017-12-06 21:12:55 -06:00
Scott Lahteine
5d01a2f467
Move temperature reporting to Temperature class
2017-12-06 21:12:55 -06:00
Scott Lahteine
6e197d4a42
Fix M503 S parameter
2017-12-06 21:12:55 -06:00
Scott Lahteine
a5b20fec2f
Whitespace clean
2017-12-06 16:19:49 -06:00
AnHardt
b19846aca1
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
2017-12-06 14:56:37 +01:00
Scott Lahteine
d951ba83e6
Show "Level Bed Corners" item with UBL too
...
Addressing #8676
2017-12-05 21:56:04 -06:00
Scott Lahteine
203a445bc1
Minimal include for speed_lookuptable
2017-12-05 21:44:59 -06:00
Scott Lahteine
9edefa645d
Remove skew warning that could crash the planner
2017-12-05 20:25:53 -06:00
Scott Lahteine
794f8f1329
Update K1 => PID_K1
2017-12-05 19:59:01 -06:00
revilor
b1f3dfab28
Fix for #8669 ( #8677 )
2017-12-05 19:40:57 -06:00
Scott Lahteine
2d6c84a817
Cleanup constexpr in planner.cpp
2017-12-05 18:54:25 -06:00
Scott Lahteine
23291a0466
Fix SKEW_CORRECTION without leveling
2017-12-05 18:47:19 -06:00
Scott Lahteine
83a1a70103
Creality pins spacing, MINIPANEL CS pin
2017-12-05 02:00:33 -06:00
Scott Lahteine
47f6fc1e07
Set initial endstops state
...
Addressing #8662
2017-12-05 01:08:39 -06:00
kein0r
f36fdc74ac
Added RAMPS v1.4 Plus board
...
Conflicts:
Marlin/boards.h
2017-12-05 00:43:02 -06:00
Scott Lahteine
ff258d43e7
Merge pull request #8661 from lumbric/bugfix-1.1.x
...
Add missing library in Makefile
2017-12-04 23:50:34 -06:00
Scott Lahteine
d8ef6faa80
Cleanup for dogm_bitmaps
2017-12-04 21:19:59 -06:00
Scott Lahteine
59eb77fd28
One fewer move required…
2017-12-04 20:35:33 -06:00
lumbric (antares)
dde0e9ee0a
Add missing library in Makefile
...
When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise
eeprom functions are not available.
Thanks to @rfjakob for finding the crucial hint to solve this issue.
2017-12-05 00:20:58 +01:00
Dave Johnson
860d98a897
[1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices ( #8653 )
...
* SERIAL_XON_XOFF not supported on USB-native AVR devices
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
2017-12-04 16:48:19 -06:00
Scott Lahteine
000818f5e4
Split first move to planner for better chaining
2017-12-04 15:43:28 -06:00
Scott Lahteine
298a357a43
Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first"
...
This reverts commit 0eef0ff0ded8582b7506
2017-12-03 17:49:24 -06:00
Scott Lahteine
44d2c5ef88
Fix M49 console hang
2017-12-03 03:36:12 -06:00
Scott Lahteine
1600f7d4ee
Merge pull request #8635 from fiveangle/bf1_report_xonxoff
...
[1.1.x] Report SERIAL_XON_XOFF in M115
2017-12-03 02:19:28 -06:00
Scott Lahteine
71a4c04dd5
Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL
...
[1.1.x] Use custom segment length for UBL Cartesian
2017-12-03 01:57:32 -06:00
Scott Lahteine
1d0ee83e18
Split first move to planner for better chaining
...
Address #8573 , #8595
2017-12-03 01:44:33 -06:00
Scott Lahteine
db8631e49a
Use custom segment length for UBL Cartesian
2017-12-03 00:02:28 -06:00
Unknown
2e295759f2
[1.1.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
config updates
-Update error checking conditions
2017-12-02 21:02:02 -08:00
Scott Lahteine
d8582b7506
Bring configurations up to date
2017-12-02 21:42:36 -06:00
dot-bob
7f656b867f
Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x ( #8614 )
...
* Add default configuration files for the Wanhao Duplicator 6.
* Update Configuration.h
2017-12-02 21:31:14 -06:00
Scott Lahteine
077fed1d88
Fix a homing comment
2017-12-02 20:57:35 -06:00
Scott Lahteine
152c5d2616
Followup to #8613
2017-12-02 20:47:33 -06:00
Scott Lahteine
26c5bbc5a7
Rename inverse_mm_s => inverse_secs
2017-12-02 20:13:31 -06:00
Jonathan Barchi
344e6b857a
configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables ( #8630 )
2017-12-02 19:04:52 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26
2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5
Comment/cleanup motion code
2017-12-02 01:42:37 -06:00
Scott Lahteine
7bed539fdb
Fix missing return values in G33_auto_tune
2017-12-02 01:06:14 -06:00
Scott Lahteine
172ce67344
New feature: BED_SKEW_CORRECTION
2017-12-01 19:43:32 -06:00
Scott Lahteine
a8d83aec89
Add SKEW_CORRECTION to example configs
2017-12-01 19:43:31 -06:00
Scott Lahteine
38e5883d44
Apply const to thermal_runaway_protection args
2017-12-01 19:43:31 -06:00
Scott Lahteine
e7c6abd767
Update V45 Settings header
2017-11-30 22:26:21 -06:00
Roxy-3D
9f7405b3f0
Restore correct gMax 1.5+ G26 values
2017-11-30 18:11:01 -06:00
Scott Lahteine
d3f8111fe7
Use some int types in Planner
2017-11-30 18:03:51 -06:00
Scott Lahteine
d1a807fdf8
Drop obsolete Planner::position_float
2017-11-30 17:28:40 -06:00
Scott Lahteine
8df42a84a4
Fix fade bug in (un)apply_leveling
2017-11-30 17:28:40 -06:00
Scott Lahteine
8f462b5717
Add Planner::set_filament_size for 2.0.x parity
2017-11-30 16:52:19 -06:00
Scott Lahteine
68c1f05aeb
Cleanups/changes to led control menu
2017-11-30 00:04:43 -06:00
Scott Lahteine
1f770bb103
Config updates, spacing mainly
2017-11-29 20:57:38 -06:00
Tannoo
e25567a5dd
New feature: LED_CONTROL_MENU
2017-11-29 20:57:38 -06:00
Scott Lahteine
9951f28892
Apply const to some planner vars
2017-11-29 20:57:38 -06:00
Scott Lahteine
80929c2637
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:58:16 -06:00
Scott Lahteine
d786fb99e2
Add an option to segment leveled moves
2017-11-29 16:58:15 -06:00
Scott Lahteine
a0fc5f7b52
Minor planner.cpp style changes
2017-11-29 15:00:33 -06:00
Scott Lahteine
ea87cd975d
Tweak to check_axes_activity
2017-11-28 18:39:29 -06:00
Scott Lahteine
fd50f452ff
Whitespace cleanup
2017-11-28 17:49:25 -06:00
Scott Lahteine
6eedb64777
Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves
...
[1.1.x] Fix WDTO during long delta moves
2017-11-28 17:27:08 -06:00
Scott Lahteine
46776de90b
Fix M290 boolval bug
...
Fix #8577
2017-11-28 17:25:14 -06:00
Scott Lahteine
dfcef11bca
Fix #8579
...
Fan speed code fell into a curly brace
2017-11-28 16:09:37 -06:00
AnHardt
f1757f30cb
Fix Watchdog time out during long lasting DELTA moves
...
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented.
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
2017-11-28 17:10:18 +01:00
Scott Lahteine
ddab1533c5
Simplify midpos calculation
2017-11-27 14:01:42 -06:00
Scott Lahteine
915c4b9ce2
Make MBL work more like PROBE_MANUALLY
2017-11-27 00:09:23 -06:00
Scott Lahteine
d7cc26cc17
Allow override of probe bounds in configs
2017-11-26 20:57:00 -06:00
Scott Lahteine
5bc5ba7ee3
More reliable set characters after bootscreen
2017-11-26 20:02:51 -06:00
Scott Lahteine
82df656cc7
Tweak readDir code
2017-11-26 18:23:34 -06:00
Scott Lahteine
51d09bb9c9
Tweak BLOCK_BUFFER_SIZE config
2017-11-26 17:33:33 -06:00
Scott Lahteine
5a1f1305f0
SD Menu patches
2017-11-26 01:10:06 -06:00
Scott Lahteine
3cf31205bc
Tweaks to bed leveling menus
2017-11-26 00:06:10 -06:00
Scott Lahteine
26a40373fc
Adjustments to blocking moves
2017-11-25 23:32:53 -06:00
Scott Lahteine
6b9e7defac
M211 output in current workspace
2017-11-25 20:47:36 -06:00
