Commit Graph

427 Commits

Author SHA1 Message Date
Scott Lahteine
6f87e4b4dc Fix up enqueue now functions
…and apply to MALYAN_LCD.
2018-04-19 19:33:16 -05:00
Luc Van Daele
21971f2f7a Overhaul of G33 Delta Calibration (#8821) 2018-04-11 19:12:56 -05:00
Luc Van Daele
b2265869b2 Low Point for delta calibration (#10362) 2018-04-11 18:03:34 -05:00
Scott Lahteine
4f660a18bc Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:22:28 -05:00
Scott Lahteine
e143b1252f Appy const to manage_inactivity 2018-04-08 23:53:55 -05:00
Scott Lahteine
647c04def8 Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
2018-03-21 19:08:02 -05:00
Scott Lahteine
d9e1cbebea Tweak use of move_z_after_probing 2018-03-21 01:36:16 -05:00
Scott Lahteine
e5fbbbc068 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:36:16 -05:00
Scott Lahteine
4eddcf9142 Also suspend keepalive messages with suspend_auto_report 2018-03-21 00:26:00 -05:00
Scott Lahteine
72776f647b Move _AXIS macro to macros.h 2018-03-19 17:59:59 -05:00
Scott Lahteine
ccb2a95456 Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
8c7e98627f Patch do_blocking_move_to so 'destination' can be used 2018-03-12 08:06:48 -05:00
Scott Lahteine
0aa100a31e Add Z_AFTER_PROBING option
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 09:48:02 -05:00
Scott Lahteine
d1256be7ec FlushSerialRequestResend => flush_and_request_resend 2018-03-11 07:34:21 -05:00
Scott Lahteine
e8fc0e9a57 Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
Scott Lahteine
0d13c5d077 Fix position_is_reachable_by_probe, add comments
Fix #10029
2018-03-09 21:18:50 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed (#10019)
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
2018-03-09 03:38:00 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014)
Fix #10004
2018-03-08 18:56:41 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
Scott Lahteine
742733d714
Un-pause on print cancellation (#9779) 2018-02-23 13:42:21 -06:00
Scott Lahteine
85162da0df
Fix Z value on HD44780 (#9770) 2018-02-23 00:42:55 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h
For parity with 2.0.x, which includes pgmspace.h in the HAL.
2018-02-16 18:40:39 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
Scott Lahteine
9dd8a49f82 Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Thomas Moore
586d50ff99 Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Scott Lahteine
b5677907d0 Minor speedup for SCARA scaling
And cleanup of Delta IK macros...
2017-12-21 22:39:06 -06:00
Scott Lahteine
4f375cd17d Match sign for filwidth across vars 2017-12-20 00:17:32 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00
Scott Lahteine
a20eacaa48 UBL devel debugging flag 2017-12-11 00:20:29 -06:00
Scott Lahteine
ccca1ade2d Always report position on config load/reset 2017-12-10 23:05:33 -06:00
Scott Lahteine
5d01a2f467 Move temperature reporting to Temperature class 2017-12-06 21:12:55 -06:00
Roxy-3D
81e52138cc
More corrections for Bi-Linear to work with G26 2017-12-02 14:13:19 -06:00
Roxy-3D
a27a9b63e4
Get Bi_Linear macros correct to work with G26
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:04:41 -06:00
Scott Lahteine
8b7c274db5 Comment/cleanup motion code 2017-12-02 01:42:37 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling.
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
2017-11-23 21:41:27 -06:00
Scott Lahteine
622d100c30 No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
RowanMeara
227b96b28b Fix M428
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
3293823642 Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
Scott Lahteine
7aadfe32e7 Prevent position_is_reachable disaster 2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27 PROBE_SELECTED etc. 2017-11-10 19:17:45 -06:00