MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,775 Commits 1 Branch 0 Tags 96 MiB
6eedb64777
Commit Graph

2264 Commits

Author SHA1 Message Date
Scott Lahteine
6eedb64777
Merge pull request #8586 from AnHardt/1_Fix_WDTO_during_long_DELTA_moves 
[1.1.x] Fix WDTO during long delta moves
 2017-11-28 17:27:08 -06:00
Scott Lahteine
46776de90b Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:25:14 -06:00
AnHardt
f1757f30cb Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:10:18 +01:00
Scott Lahteine
ddab1533c5 Simplify midpos calculation 2017-11-27 14:01:42 -06:00
Scott Lahteine
915c4b9ce2 Make MBL work more like PROBE_MANUALLY 2017-11-27 00:09:23 -06:00
Scott Lahteine
26a40373fc Adjustments to blocking moves 2017-11-25 23:32:53 -06:00
Scott Lahteine
6b9e7defac M211 output in current workspace 2017-11-25 20:47:36 -06:00
Scott Lahteine
737cee4b8c Syntax tweaks 2017-11-25 18:15:16 -06:00
Scott Lahteine
2060ba3556 M290 report on change, P0 to leave Probe Z Offset unchanged 2017-11-25 16:51:00 -06:00
Scott Lahteine
e56ead5e1c Followup to G33 patch 2017-11-25 16:01:55 -06:00
LVD-AC
8b9e68c32d [1.1.x] G33 probe error handing 2017-11-25 15:44:30 -06:00
Scott Lahteine
b2d3fffe74 Patches for M290, M851 2017-11-25 14:10:49 -06:00
Thomas Moore
ecf19344f6 Initialize mixing virtual tools to behave like standard a multi-extruder setup (#6853) 
* Initialize mixing virtual tools to behave like standard a multi-extruder setup

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-11-24 18:06:32 -06:00
Scott Lahteine
adee17847c Fix #8540 
Does it?
 2017-11-24 17:05:42 -06:00
Rob Power
f8e30f49d7 Add NanoDLP Z movement synchronization option 
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
 2017-11-24 00:32:03 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling. 
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
 2017-11-23 21:41:27 -06:00
Scott Lahteine
ed6a5ff7e5
Merge pull request #8524 from GMagician/1.1.x-tool-change-bad-behaviour-fix 
[1.1.x] Tool change bad behaviour fix
 2017-11-22 20:23:02 -06:00
Scott Lahteine
99b71c1dde Move lcd_map_control to UBL 
For parity with bugfix-2.0.x
 2017-11-22 18:45:55 -06:00
Scott Lahteine
73ddc762c8 Fix up LCD init / charset 2017-11-22 18:07:03 -06:00
GMagician
7a5b3a1e6a [1.1.x] Tool change bad behaviour fix 
Just aligned with version 2.0. Here bug was not present
 2017-11-22 23:51:07 +01:00
Scott Lahteine
e2568d7589 Fix delta_safe_distance_from_top 2017-11-22 14:11:04 -06:00
Scott Lahteine
0b1d754e7d Fix G42 2017-11-22 14:11:04 -06:00
Scott Lahteine
bbc2ee6da1
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:21:50 -06:00
GMagician
b96ceb4256 [1.1.x] tool change bad behaviours 
This PR will address two issues reported in #8492. Just one is left because I don't know if it is an issue or not

1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
    When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:39:32 -06:00
Bob-the-Kuhn
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x 
[1.1.x] M43 end pin correction/compatibility
 2017-11-19 11:01:10 -06:00
Bob-the-Kuhn
9b80e1e04a change to L for end pin for M43 Toggle command 2017-11-18 13:48:53 -06:00
Scott Lahteine
bf6a1816b4 Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
Scott Lahteine
622d100c30 No retroactive changes with M851 Z 2017-11-18 03:37:07 -06:00
Thomas Moore
97c19de8b9 Fix PlatformIO dependencies 2017-11-16 15:16:21 -06:00
Scott Lahteine
4e19c59ab3 Miscellaneous cleanup 2017-11-16 01:18:05 -06:00
Scott Lahteine
d3b8f30818 Fix M32 P subroutine handling 2017-11-15 01:09:06 -06:00
Scott Lahteine
95590adf07 Make sure leveled[] is enabled for use 2017-11-14 02:12:20 -06:00
Scott Lahteine
90c7d28055 Extrudrboard support for Printrboard Rev.F 2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x 
[1.1.x] Fix M428
 2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca [1.1.x] Fix compilation warnings (#8395) 
* Fix up Travis CI and compile warnings/errors

* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER

* No point in setting all the endstop plugs
 2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa Apply native workspace fixes to G92, G53-59 2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b Fix M428 
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
 2017-11-13 01:34:43 -06:00
Scott Lahteine
aa616cd410 No leveling data in M114 without leveling 2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890 Fix report_current_position 
Thanks @RowanMeara!
 2017-11-12 22:57:57 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup 
[1.1] Remove offsets from soft endstops, tool change
 2017-11-11 23:13:40 -06:00
Scott Lahteine
355dfed437 Coding standard patch of M290 2017-11-11 22:16:13 -06:00
Scott Lahteine
802ae73b13 Turn off laser power pin when PWM goes to 0 2017-11-11 22:02:19 -06:00
Scott Lahteine
549c814e8d Remove offsets from soft endstops, tool change 2017-11-11 21:28:32 -06:00
Scott Lahteine
564fbc8dec M290 constrain patch 2017-11-11 20:50:16 -06:00
Scott Lahteine
df44bcc5ae Use do_blocking_move_to where possible 2017-11-10 20:37:41 -06:00
Scott Lahteine
3293823642 Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
Scott Lahteine
24b302c001 Fix cold/lengthy extrusion handling 2017-11-10 20:09:59 -06:00
Thomas Moore
4714fb8fcb Normalize load/unload length in M600 2017-11-10 19:59:26 -06:00
Scott Lahteine
b0ff3a4c6d Cleanup around updatePID 2017-11-10 19:17:46 -06:00
LVD-AC
8ce9306b27 PROBE_SELECTED etc. 2017-11-10 19:17:45 -06:00