Commit Graph

752 Commits

Author SHA1 Message Date
Scott Lahteine
77769e284f Edit configuration comments 2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424 Minor fix in K8200 readme 2017-05-05 11:25:11 -05:00
Scott Lahteine
da08e11acd Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling 2017-05-04 00:19:07 -05:00
Scott Lahteine
628391304f Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
2c13922c46 Implement USE_CONTROLLER_FAN as a feature 2017-05-02 20:18:52 -05:00
Scott Lahteine
b93be716cf Remove trailing whitespace 2017-05-02 17:53:40 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 2017-04-30 15:30:31 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
Scott Lahteine
7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Scott Lahteine
0a8e09c723 Clean up excess whitespace, comment formatting 2017-04-28 18:32:38 -05:00
LVD-AC
ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
3601f08e87 Better tuned FolgerTech i3-2020 example file 2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581 Better tuned Example file for FolgerTech i3-2020
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Roxy-3D
22f6e277af Get example files fully into compliance
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
Roxy-3D
ec26e23e7e Add my two 'Nice' machines as example configurations
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
LVD-AC
d4f593d200 Delete 'expert level'
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's)
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
LVD-AC
03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
james94jeans2
5b9476fe78 Added z_fade_height to EEPROM-Settings
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Paweł Stawicki
0eb16d9ff7 Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller 2017-04-09 06:44:54 -05:00
Scott Lahteine
e5b16081cb Update TinyBoy2 configurations 2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00