MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
528 Commits 1 Branch 0 Tags 96 MiB
8ac5b29e02
Commit Graph

194 Commits

Author SHA1 Message Date
Erik van der Zalm
21e2bae063 Changed (corrected?) SD_card comment handling. 2012-03-03 21:28:33 +01:00
Erik van der Zalm
cb0c84e075 Merge remote-tracking branch 'justblair/master' into Marlin_v1 2012-03-03 20:20:55 +01:00
Erik van der Zalm
ed951b1977 Fixed RAMPS 1.2 support (Found and fixed by rrhb) 2012-03-03 20:15:41 +01:00
Blair Thompson
046a8e0039 Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task. 2012-03-03 15:51:47 +00:00
Christian Thalhammer
5f3a422e68 added M31 - delete file from sd card 2012-03-02 21:49:05 +01:00
Christian Thalhammer
cb02914687 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2012-02-29 14:51:35 +01:00
Christian Thalhammer
10bf2bb8e1 - 2012-02-29 14:51:15 +01:00
Erik van der Zalm
b4833d55c2 Fixed HOME_POS in combination with G28 X0 or G28 Y0 2012-02-28 18:20:03 +01:00
Erik van der Zalm
c6f2ec3c82 remove stop_heating_wait 2012-02-27 18:45:45 +01:00
Erik van der Zalm
b48d67ce10 Fixed homing 2012-02-27 18:31:40 +01:00
Phil Hord
09469add55 Add board reset reporting (from Repetier-Firmware) 2012-02-26 18:26:56 -05:00
Erik van der Zalm
27f595a444 Changed version => RC2 2012-02-26 16:26:40 +01:00
Erik van der Zalm
84ea2d61e8 Moved gen7 boards to motherboard type 10, 11 and 12. 
Split ramps1.3 in Sprinter like config and multiextruder config.
 2012-02-24 23:34:41 +01:00
Erik van der Zalm
5aa9c41ab1 Changed comment mode for detection. 
Added M221 extuder multiply factor.
 2012-02-24 20:42:07 +01:00
Erik van der Zalm
ae3e7586c6 Added HOME_POS. This adds the posibility to make the center 0 
Updated the Xsteps ... settings via the LCD menu
 2012-02-22 18:07:56 +01:00
Erik van der Zalm
df1437bd86 Changed display format for some numbers. 2012-02-21 23:05:43 +01:00
Erik van der Zalm
d298dd121f merged SBUBA82 and Justblair 2012-02-21 20:26:59 +01:00
Erik van der Zalm
2cc9a89830 Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1 2012-02-21 20:17:35 +01:00
Erik van der Zalm
a0a1f81913 various changes 2012-02-21 20:17:28 +01:00
Blair Thompson
fe940a142d Added a structure that will allow easy translations/modifications to the LCD menu. 
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
 2012-02-20 22:22:46 +00:00
Christian Thalhammer
d309565b56 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
 2012-02-13 13:07:55 +01:00
Christian Thalhammer
0e3631ff4b smaller changes 2012-02-13 12:31:53 +01:00
Erik van der Zalm
7699f250e3 Fixed small merge bug 2012-02-12 14:06:08 +01:00
Erik van der Zalm
11518a987f merged with triffid fork 2012-02-12 13:58:36 +01:00
Erik van der Zalm
13e185d330 removed unused HEATING_EARLY_FINISH_DEG_OFFSET 
Simplified stepper inactive time
 2012-02-11 23:22:16 +01:00
daid
2a77c84c8f Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
Erik van der Zalm
f87c80889f Fixed M109 timer overflow (reported by triffid) 2012-02-09 20:54:49 +01:00
Erik van der Zalm
154de69c02 Print configuration.h version during startup (thanks hairykiwi) 2012-02-09 20:26:17 +01:00
Erik van der Zalm
598eb1d4f1 Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid) 2012-02-09 19:38:53 +01:00
Erik van der Zalm
9173a5713b Teensylu support. 2012-02-09 19:27:45 +01:00
Erik van der Zalm
5113513cb2 RC 1 2012-02-08 18:28:54 +01:00
Erik van der Zalm
d8a0c6450f Split the configuration file in two parts. 
One for common settings.
One for advanced settings.
 2012-02-07 20:23:43 +01:00
Christian Thalhammer
b5fae1104b fixed sUICIDE_PIN disable 2012-02-07 08:50:26 +01:00
Erik van der Zalm
e45e5c68bb Added support for Gen3+ (Pins file only) 
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.

Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
 2012-02-05 12:42:15 +01:00
Michael Moon
3e575533c5 get M81 working 2012-01-24 14:24:41 +11:00
Michael Moon
2ae2ead97b help residency not overflow 2012-01-24 14:24:24 +11:00
Michael Moon
8d0916af13 allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications 2012-01-24 13:18:54 +11:00
haxar
6cc6029d7a M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print 2012-01-22 03:25:56 -08:00
Bernhard
157aa7f2fd m115 eol fix 2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d small mistake 2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output. 2012-01-15 17:06:10 +01:00
Bernhard
57f9359a41 simplified the includes, makefile now works with arduino23 2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b header file simplification 2011-12-22 12:38:50 +01:00
Bernhard
212515148e added m240 photography support. default off 2011-12-22 12:11:39 +01:00
Erik van der Zalm
554cc1718d Fiexed E_ENABLE_PIN errors 2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76 G92 fix 2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339 merging 2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569 Merged multiple extruder support. 
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
 2011-12-12 19:34:37 +01:00
Bernhard
06411d5c9e ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints. 2011-12-11 22:18:50 +01:00
Bernhard
01001b89d2 repaired nozzle runout prevention to not collide with automatic stepper disabeling. 2011-12-11 15:42:56 +01:00
Bernhard Kubicek
f6fe7143e4 Merge pull request #29 from k-eex/Marlin_v1 
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
 2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9 disable steppers in runout prevention 2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e prevent too long extrudes, or too cold extrudes 2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474 better values. 2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43 made runout prevention independent of tempeorarily set esteps 2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a extruder runout prevention. 2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing. 2011-12-09 12:51:08 +01:00
Keegi
bae1e422f6 Fix M201 not saving settings in all places, so the changes did not get written into EEPROM 2011-12-08 12:25:32 +02:00
Bernhard
986f0ba76c moved <stdio.h> to more dominant location. 2011-12-07 20:56:47 +01:00
Bernhard
460b788d78 repaired homing position setting. 2011-12-07 20:54:34 +01:00
Denis B
4fd75dc813 Working version of multiple extruders (up to 3) 
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4
 2011-12-06 00:09:16 -05:00
Bernhard
12e8edcac3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-12-04 22:27:37 +01:00
Bernhard
cf50ba140f added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab. 2011-12-04 22:26:42 +01:00
Erik van der Zalm
b99c49ec3b Add option to only check endstop when homing 2011-12-04 20:17:21 +01:00
Bernhard
7714b98da7 solved some compiler warnings that are now visible in arduino 1.0. 
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
 2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260 overworked autotemp, removed one layer of nesting from the ultralcd. 2011-12-04 09:48:53 +01:00
Bernhard
4f909963e4 make QUICKHOME configureable 2011-12-04 09:02:09 +01:00
Bernhard
b0c3871750 more fixing of the sanguino math round problem 2011-11-30 09:07:56 +01:00
Bernhard
716e89b87c first homing move diagonal towards home switches. 2011-11-29 22:11:45 +01:00
Bernhard
e4ab0e5982 more inlines 2011-11-28 22:11:17 +01:00
Bernhard
8cb29921a0 possible stepper release after sd printing 2011-11-28 22:09:17 +01:00
Bernhard
044886b4a0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-28 21:52:16 +01:00
Erik van der Zalm
6d95644c0d Moved M88 into M84. (M84 E) 2011-11-28 21:49:54 +01:00
Bernhard
311627141b Merge branch 'smallopt' into Marlin_v1 
Conflicts:
	Marlin/temperature.h
 2011-11-28 21:36:01 +01:00
Erik van der Zalm
7216a12856 Disabled M88 for boards that don't have seperate enable pins. 2011-11-28 21:17:06 +01:00
Erik van der Zalm
98805c9228 Added M88 command. (Request from Action68) 2011-11-28 20:51:01 +01:00
Erik van der Zalm
f75f426dfa Removed interrupt nesting in the stepper ISR. 
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
 2011-11-27 21:12:55 +01:00
Bernhard
2d9a715655 first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops. 2011-11-27 17:27:17 +01:00
Bernhard
d2f034ba84 lcd message from gcode, m117 2011-11-27 16:53:11 +01:00
Erik van der Zalm
aad4b75b94 First parts 2nd extruder 2011-11-26 17:33:25 +01:00
Bernhard
a0dc66f7bf Home retract distance configureable per axis. 2011-11-26 12:04:06 +01:00
Bernhard
4d6a5c29df disable steppers as routine in stepper.cpp 2011-11-26 11:50:23 +01:00
Bernhard
74d0032e25 cooldown blocking selectable by #define. 2011-11-26 09:03:12 +01:00
Bernhard
57e163e989 typo 2011-11-25 22:34:12 +01:00
Bernhard
b58787a367 now velocities are also set in mm/sec in gcode. 2011-11-25 22:32:26 +01:00
Erik van der Zalm
6ac9b2e761 Fixed residency time bug. (Thanks to Sound :-) ) 2011-11-25 19:34:36 +01:00
Erik van der Zalm
0e0e4945d8 Removed ISR overtaken message from ISR routine 2011-11-25 13:59:58 +01:00
Erik van der Zalm
c0f8c9fd72 Seperate ENDSTOP_INVERTING for X Y and Z 
Added simple endstop filter.
Corrected M114 count display.
 2011-11-25 13:43:06 +01:00
Bernhard Kubicek
5535e51bf6 Yes, thats the beta. 2011-11-20 17:04:57 +01:00
Erik van der Zalm
4e5becfc51 Added endstop reporting 2011-11-20 14:50:08 +01:00
Erik van der Zalm
0e7fee9a9b Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 2011-11-19 21:33:15 +01:00
Erik van der Zalm
915ef2d4a1 Added software endstops 2011-11-19 21:32:47 +01:00
Bernhard Kubicek
e87df99e22 update mcode documentation 2011-11-19 21:01:07 +01:00
Bernhard Kubicek
7a2d1f5aeb add M17, so the enable stepper button works in repg. 2011-11-19 18:22:22 +01:00
Bernhard Kubicek
2a6afee832 make it compile without autotemp 2011-11-19 17:09:33 +01:00
Bernhard Kubicek
8a08b8e07e trying to get autotemp to work. 2011-11-19 15:37:10 +01:00
Bernhard Kubicek
70abca195a overworked cardreader for folder support; not finished yet. 2011-11-19 13:13:34 +01:00
Bernhard Kubicek
1e5e141ac9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-18 22:22:23 +01:00
Bernhard Kubicek
5df5727e93 removed some debugging comments 2011-11-18 22:20:53 +01:00
Bernhard Kubicek
64f2121ab1 updated to sdfatlib2010902 2011-11-18 22:17:37 +01:00