Commit Graph

110 Commits

Author SHA1 Message Date
kieranc
8ccdac9898 Enable PID debugging for heated bed 2015-02-23 09:42:01 +01:00
kieranc
29097b0ab2 Enable PID debugging for heated bed 2015-02-23 09:41:25 +01:00
kieranc
21bd4fd6db Enable PID debugging for heated bed 2015-02-23 09:40:53 +01:00
kieranc
fb56aad898 Enable PID debugging for heated bed 2015-02-23 09:40:29 +01:00
kieranc
08c543f8fb Enable PID debugging for heated bed 2015-02-23 09:40:06 +01:00
kieranc
c89413db1e Enable PID debugging for heated bed 2015-02-23 09:39:39 +01:00
kieranc
1c71e4751a Enable PID debugging for heated bed 2015-02-23 09:39:07 +01:00
maverikou
a9e15aa503 Updated example configurations 2015-02-22 20:15:05 +02:00
Scott Lahteine
27ac3e985d Add options to example_configurations 2015-02-21 18:17:37 -08:00
Scott Lahteine
7866fa161f Merge pull request #1476 from Natealus/Development
Compiling errors with 4 Extruders defined and Viki 2 Implementation
2015-02-12 16:56:55 -08:00
AnHardt
c246026bda Sorry. 2015-02-10 00:23:39 +01:00
Natealus
f4b0a40abb Additional fixes to temperature.cpp and found another missing line
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
2015-02-08 15:43:58 -07:00
Natealus
38a500d05c Viki 2 Implementation
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.

I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
2015-02-08 03:14:59 -07:00
Natealus
697ee2dc50 Compiling errors with 4 Extruders defined
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
2015-02-08 01:05:05 -07:00
CONSULitAS
cfbb94a2a8 K8200: Example Configuration.h fixed
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
2015-02-04 10:35:10 +01:00
CONSULitAS
0de5083aff K8200: Example Configurations readme.md updated
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
2015-02-04 00:24:51 +01:00
CONSULitAS
c421ffd520 K8200: Example Configuration_adv.h back in sync
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
2015-02-04 00:19:18 +01:00
CONSULitAS
0575dd10de K8200: Example Configuration.h back in sync
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
2015-02-04 00:15:50 +01:00
AnHardt
2abf1ad940 Distribute recent changes in Configuration.h to the examples. 2015-02-03 17:59:04 +01:00
Scott Lahteine
b3973ed224 Fix HD44780 misspelled as HD44870 2015-02-02 22:33:58 -08:00
Scott Lahteine
6d81968db5 Merge pull request #1450 from docdawning/Development
Normalized section headers, added some headers, added help URLs for newb...
2015-02-02 21:17:06 -08:00
DocDawning
5bb3933b21 Fixed n00bsauce 2015-02-02 14:18:53 -07:00
DocDawning
d109cd940b Normalized all configuration files to include my new section headers and the like. 2015-02-02 14:11:21 -07:00
AnHardt
26e55471f8 Update example configurations. 2015-02-01 13:46:32 +01:00
Scott Lahteine
0af9a0bf57 url to firmware downloads 2015-01-31 22:19:45 -08:00
Scott Lahteine
07639053fb Add support for BQ Prusa i3 "Hephestos" 2015-01-31 21:38:30 -08:00
Victor Andueza
13118cde33 Add bq Witbox 3D printer 2015-01-28 16:52:36 +01:00
AnHardt
75cf302da3 example configurations changed to meet Configuration.h 2015-01-27 00:01:33 +01:00
Scott Lahteine
3a9a3e5ed8 Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
This define is not used.
2015-01-23 10:51:06 -08:00
CONSULitAS
d1322dafc9 Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
CONSULitAS
51c7f2fd5a Revert "## Add: Example Configuration for Vellemann K8200"
This reverts commit 5333590ac2.
2015-01-19 00:37:57 +01:00
CONSULitAS
5333590ac2 ## Add: Example Configuration for Vellemann K8200
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
Dino Del Favero
5cfe13f240 Correct some mistakes 2015-01-06 21:55:08 +01:00
Caleb Anderson
991a74b75b Move delta calibration menu to sample delta configuration.
Turn off by default.
2014-12-29 18:03:56 -07:00
alexborro
3afe66bb0c Fix issues #1248, #1240
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
2014-12-28 13:27:39 -02:00
Scott Lahteine
2f467e2797 LCD Progress Bar 2014-12-27 22:26:14 -08:00
daid
17de96ace7 Merge branch 'Marlin_v1' into revert-1154-sd_sorting
Conflicts:
	Marlin/cardreader.cpp
	Marlin/cardreader.h
2014-12-18 23:13:50 +01:00
Scott Lahteine
6880e93b75 Happy configs 2014-12-18 14:02:47 -08:00
Scott Lahteine
3b1f186c0c Clean up configs 2014-12-18 13:59:31 -08:00
Scott Lahteine
f83d0f2a68 Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
2014-12-18 13:59:31 -08:00
Bo Herrmannsen
174f8d3631 Added example configs for printers from http://tvrrug.org.uk/ 2014-12-18 20:34:24 +01:00
Scott Lahteine
07c6b5ab71 Using axis constants 2014-12-18 08:13:08 -08:00
alexborro
ab355a90d3 Revert "SD Sort and Buffer" 2014-12-17 14:50:59 -02:00
Scott Lahteine
29e854c535 Disable SDCARD_SORT_ALPHA by default
For legacy boards it’s better if this option is disabled.
2014-12-13 06:12:34 -08:00
Scott Lahteine
6599adc184 Polish up a little... 2014-12-13 06:12:34 -08:00
David
377dfb182f Updated example configurations for Delta printers 2014-11-02 21:04:54 +00:00
Scott Lahteine
f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
cocktailyogi
ad3b770c1a updated examples 2014-07-20 13:55:13 +02:00
cocktailyogi
f0cab611db optimised some math-code 2014-06-24 18:43:36 +02:00
cocktailyogi
512f2a3136 restore Branch from Backup
sorry for that
2014-06-23 17:09:57 +02:00
Cameron Lai
ad5c8cbba9 Add safety limit for hot bed power in example configuration 2014-04-25 17:04:24 +08:00
Cameron Lai
e2d703377a Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration 2014-04-24 19:15:35 +08:00
Cameron Lai
39e9b133f3 Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board 2014-04-24 17:06:07 +08:00
Jim Morris
af9395ac2e Add M605 to dynamically set delta configuration
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
2014-02-17 20:50:59 -08:00
Joseivaldo Benito Junior
ce8b9c4fc5 Correct missing parameter from last upmerge
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-19 00:50:44 -02:00
Joseivaldo Benito Junior
8e48e24c7f Update Delta example files
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-18 00:04:36 -02:00
Jim Morris
f26f26b7bd Fix the example delta configuration as someone forgot to do it. 2013-09-05 16:36:55 -07:00
Nicolas Rossi
b0c8120fcc Added feedrate setting in exemple config for manual moves from panel 2013-08-03 13:09:53 +02:00
hg42@gmx.net
2ca983568d separate INVERTING for MIN and MAX endstops (6 #defines instead of 3) 2013-08-01 15:06:39 +02:00
Jim Morris
52f79ffeca add an example default configuration for delta style bots 2013-07-24 02:55:52 -07:00