Commit Graph

1461 Commits

Author SHA1 Message Date
Steffen Vogel
95f4a55820 refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients 2015-01-06 08:24:59 +01:00
Steffen Vogel
21205cc3d8 more cleanups in the termistorTable generation script 2015-01-06 08:23:51 +01:00
Steffen Vogel
fb0996b5db improved output aligment and precision 2015-01-06 08:20:52 +01:00
Steffen Vogel
538231edfd cosmetic whitespace cleanup and comments added/updated 2015-01-06 08:20:20 +01:00
Dan Royer
9472bbe51d issue 968 for dev branch
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
2015-01-04 12:17:46 -08:00
alexborro
d2b6e62996 Merge pull request #1309 from philfifi/fix_temp_runaway
temp runaway: proper cast to prevent any overflow.
2015-01-04 12:55:58 -02:00
Philippe L
30248214c7 temp runaway: proper cast to prevent any overflow. 2015-01-04 14:23:31 +01:00
Bo Herrmannsen
c5f138ea07 Merge pull request #1291 from alhirzel/Development
Define analogInputToDigitalPin only if needed
2015-01-04 12:53:41 +01:00
Bo Herrmannsen
3d9f4ac757 Merge pull request #1303 from wgm4321/Development
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
2015-01-04 01:29:26 +01:00
wgm4321
04fb34c7ff Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 17:28:05 -05:00
wgm4321
f8aa5ff771 Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined 2015-01-03 17:10:13 -05:00
Alexander Hirzel
f36fd3ddec Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development 2015-01-02 12:39:39 -05:00
Scott Lahteine
b5e50cdd4e Move scripts and documentation to subfolders 2015-01-02 08:53:09 -08:00
Alexander Hirzel
eed451e034 rework analogInputToDigitalPin definition 2015-01-02 11:14:20 -05:00
Lane Roberts
1f520a5a8c Due to the fix for #1248, X and Y probe offsets must not be floats.
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
2015-01-02 11:12:16 -05:00
wgm4321
b32be2dc64 Fix syntax error caused by previous changes. 2015-01-02 11:12:16 -05:00
wgm4321
edac64e7d2 Add Filament menu and add Filament/Retract settings to config store. 2015-01-02 11:12:15 -05:00
Alexander Hirzel
ecda6cdc0a Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 11:12:15 -05:00
David Forrest
f3e503e725 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-02 11:12:15 -05:00
David Forrest
1d5d853c9a temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-02 11:12:15 -05:00
Bo Herrmannsen
63da6900b0 Merge pull request #1282 from vandarin/Development
Due to the fix for #1248, X and Y probe offsets must not be floats.
2015-01-02 15:35:40 +01:00
Bo Herrmannsen
a18b625534 Merge pull request #1261 from wgm4321/Development
Add Filament menu and add Filament/Retract settings to config store.
2015-01-02 15:35:29 +01:00
Alexander Hirzel
ae12ad0d6c Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 01:38:03 -05:00
alexborro
80b17ab573 Merge pull request #1285 from drf5n/PID_CI_v2
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
2015-01-01 22:56:21 -02:00
David Forrest
625860f086 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-01 19:24:42 -05:00
David Forrest
6583bb781d temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-01 19:11:42 -05:00
Lane Roberts
2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats.
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
2014-12-31 12:34:59 -06:00
Grogyan
6b82415c81 Update pins.h
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
2014-12-31 13:04:16 +13:00
Bo Herrmannsen
692a01b1c7 Merge pull request #1277 from thinkyhead/fix_regressions
Fix regressions affecting compilation
2014-12-30 16:49:08 +01:00
Scott Lahteine
2ec2bf1564 Fix regressions affecting compilation
This fixes two regressions, caused by #1167 and #1191 .
2014-12-30 07:36:18 -08:00
Scott Lahteine
e7db8ee9e5 ftostr32np > ftostr32sp
sp=space-padded, similar to: ns=no-sign
2014-12-30 07:26:25 -08:00
Scott Lahteine
10e1b6ef8b Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:25 -08:00
Scott Lahteine
d1f21d1189 As it should be 2014-12-30 07:26:25 -08:00
Scott Lahteine
449dad71f2 Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:24 -08:00
Scott Lahteine
a2109cb492 Patch to make Z look more like X and Y on UltraLCD 2014-12-30 07:26:24 -08:00
Bernhard Kubicek
3d1da45f3e Update Marlin.h 2014-12-30 08:30:37 +01:00
bkubicek
d02daec08f fixed compilation 2014-12-30 08:04:06 +01:00
Caleb Anderson
991a74b75b Move delta calibration menu to sample delta configuration.
Turn off by default.
2014-12-29 18:03:56 -07:00
Bo Herrmannsen
67fd8f0727 Merge pull request #1267 from RobotCaleb/LanguageFix
Language Fix - Using the new language implementation wasn't behaving as expected.
2014-12-29 19:49:11 +01:00
Caleb Anderson
236db44669 Fix spacing 2014-12-29 10:44:55 -07:00
Caleb Anderson
e6774fb7d2 Using the new language implementation wasn't behaving as expected.
No matter what LANGUAGE_CHOICE was set to it would always take the en branch.
I revamped it a bit to use a macro to create the language include file name. This required a slight tweak to the RU declaration since it's special-cased in a couple places in code.

This is an attempt to pull my changes from #1222 over.
2014-12-29 10:43:19 -07:00
Caleb Anderson
cb047e9070 Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently) 2014-12-29 10:19:25 -07:00
Caleb Anderson
5b336a4cdb Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
2014-12-29 10:13:00 -07:00
Bernhard Kubicek
10ad9f1062 Addes servo0 pin ultimaker 2014-12-29 17:27:14 +01:00
Bernhard Kubicek
f24c5d82e3 Update Marlin_main.cpp
fixed minor typo
2014-12-29 17:17:30 +01:00
Wurstnase
8a6f098cc6 Expand manage_inactivity #1264
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
2014-12-29 17:07:22 +01:00
Wurstnase
d1995aec7a Rename ignore_blocks_queued
more speaking name
2014-12-29 16:47:08 +01:00
Wurstnase
4122de9d17 change filament issue
make a more general solution
2014-12-29 16:31:00 +01:00
wgm4321
d60efc3b5d Fix syntax error caused by previous changes. 2014-12-28 20:47:59 -05:00
wgm4321
cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00