MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,002 Commits 1 Branch 0 Tags 96 MiB
a3e25a0fca
Commit Graph

4049 Commits

Author SHA1 Message Date
João Brázio
80f05920c5
Moves Felix's dual configuration to a folder 2016-05-20 00:49:16 +01:00
Scott Lahteine
8218558953 Update comments, rename next_ping_ms, followup to #3797 2016-05-19 16:44:57 -07:00
Scott Lahteine
6d68b12e28 Merge pull request #3797 from AnHardt/fix-screen-updatedelay 
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
 2016-05-19 16:29:27 -07:00
AnHardt
e761bdbb4b Remove SF_ARC_FIX from G5 (Cubic B-spline) 
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
 2016-05-19 21:00:12 +02:00
AnHardt
2207001333 No compromises for the manage_heater() 
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
 2016-05-19 20:52:11 +02:00
AnHardt
0c4d885d5b Speedup sreen update delay 
Speedup sreen update delay
and correct a comment.

A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
 2016-05-19 15:41:09 +02:00
Rafa Couto
9d416289cc Update Galician language to 1.1.0-RCBugFix. 2016-05-19 19:33:40 +09:00
Scott Lahteine
07c9a11c3c Automatically set X2 stepper pins 2016-05-18 19:09:09 -07:00
Scott Lahteine
8aa591ca09 Merge pull request #3789 from jbrazio/feature/m999-s-arg 
Implements S1 argument in M999
 2016-05-18 16:58:09 -07:00
Scott Lahteine
138c5c8378 Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix 
DUAL_X_CARRIAGE fixes, improvements, Travis test
 2016-05-18 16:56:54 -07:00
João Brázio
e6effb8f35
Implements S1 argument in M999 2016-05-19 00:13:33 +01:00
Scott Lahteine
2a7b1a85f7 Improve DUAL_X_CARRIAGE sanity check errors 2016-05-18 15:59:28 -07:00
Scott Lahteine
516e79bbda Declare extruder_duplication_enabled in Marlin.h 2016-05-18 15:51:44 -07:00
esenapaj
56d5ae596c Update Japanese trasration 
・Add new translation
・Change translation
 2016-05-18 20:42:50 +09:00
Scott Lahteine
4041508ffb Function decl. in headers don't need "extern" 2016-05-17 18:35:01 -07:00
Scott Lahteine
82c2d308dc Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix 
Bezier style and DELTA patch
 2016-05-17 18:27:48 -07:00
Scott Lahteine
ecec5c5e58 Bezier style and DELTA patch 2016-05-17 18:06:10 -07:00
Scott Lahteine
d66e53c42b Merge pull request #3782 from thinkyhead/rc_home_z_before_g29 
Require homing of Z before G29
 2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5 Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup 
Minor DELTA segmentation speedup
 2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c XYZ unhomed 2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4 Require homing of Z before G29 2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc Minor DELTA segmentation speedup 
Minor DELTA segmentation speedup by pulling calculations out of the loop.
 2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves 
Add BEZIER_CURVE_SUPPORT — G5 command
 2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3 Merge pull request #3775 from jbrazio/bugfix/followup-3770 
G29: Report final position back to host when using MBL
 2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL 2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6 Add stowing process for MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85 Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
Scott Lahteine
58339aea5f Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior 
Bugfix: iteration invokes undefined behavior
 2016-05-15 20:36:25 -07:00
Scott Lahteine
26b4cb5b42 Merge pull request #3771 from thinkyhead/rc_auto_fans_again 
Fix checkExtruderAutoFans
 2016-05-15 20:32:31 -07:00
Scott Lahteine
c9271e610b Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon 
Remove the hotbed icon from the status screen
 2016-05-15 19:11:05 -07:00
Scott Lahteine
2f14934c65 Fix checkExtruderAutoFans 
Make sure to only set the fan state once when extruders share a fan
 2016-05-15 18:54:37 -07:00
João Brázio
ecd490ed49
Bugfix: iteration invokes undefined behavior 2016-05-15 22:45:08 +01:00
Scott Lahteine
abdfd914f8 Merge pull request #3763 from esenapaj/patch-4 
Follow-up for #3720 and #3759
 2016-05-15 12:37:51 -07:00
Scott Lahteine
754b0152f5 Fix MBL zigzag calls 2016-05-15 12:35:01 -07:00
esenapaj
6d722716f7 Follow-up the PR #3720 and #3759 
Update forgotten Configuration_DUAL.h
 2016-05-15 14:08:45 +09:00
João Brázio
451000387d
Remove the hotbed icon when HAS_TEMP_BED is false 2016-05-15 03:00:05 +01:00
Scott Lahteine
a058226799 Prevent watchdog timeout in bezier moves 2016-05-14 17:41:16 -07:00
Scott Lahteine
13175ce7da Fix error checking in M421 2016-05-14 17:12:44 -07:00
Scott Lahteine
bc5a547d55 More robust MBL index / point conversion 2016-05-14 16:45:56 -07:00
Scott Lahteine
a3520b6f01 More precision in M503 output for MBL's M421 2016-05-14 16:19:37 -07:00
Scott Lahteine
1b90682617 Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins 
Remove need to define unused pins as -1 in pins files
 2016-05-14 15:49:22 -07:00
Scott Lahteine
c8a40f06a6 Merge pull request #3759 from thinkyhead/rc_more_printcounter 
Printcounter bugfix and some new features
 2016-05-14 15:36:31 -07:00
Scott Lahteine
585c8a918f Merge pull request #3758 from thinkyhead/rc_verbiage 
Tweaks to some verbiage
 2016-05-14 15:27:11 -07:00
João Brázio
f9a62f6a8e Added PRINTJOB_TIMER_AUTOSTART section to example config files 2016-05-14 15:22:45 -07:00
João Brázio
8a18c52002 Adds an option to disable print job timer auto start 2016-05-14 15:22:44 -07:00
João Brázio
a79267217b M78 now allows stats reset using the S78 argument 2016-05-14 15:22:44 -07:00
João Brázio
b660f1bdb8 Bugfix: Multiple M77 no longer increment the print counter 2016-05-14 15:22:43 -07:00
Scott Lahteine
c63f95f2fe Merge pull request #3748 from clexpert/patch-1 
Lastest changes in Czech translate
 2016-05-14 15:12:39 -07:00
Scott Lahteine
e01e52969e Merge pull request #3757 from thinkyhead/rc_fix_auto_fans 
Don't try to enable unused auto fans
 2016-05-14 15:09:24 -07:00
Scott Lahteine
ddf3e1e22d Tweaks to some verbiage 2016-05-14 15:06:09 -07:00
Scott Lahteine
a713043acd Merge pull request #3749 from esenapaj/patch-3 
Enclose all #error strings by double-quotes
 2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12 Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE 
G29 missing FIX_MOUNTED_PROBE condition
 2016-05-14 15:00:42 -07:00
Scott Lahteine
08dfe08f9a Merge pull request #3754 from jbrazio/feature/update-pt_PT 
Updated pt_PT language pack
 2016-05-14 15:00:12 -07:00
Scott Lahteine
596ebccd54 Merge pull request #3753 from jbrazio/feature/followup-3740 
Warn user about useless of individual axis homing and DELTA kinematics
 2016-05-14 14:59:49 -07:00
Scott Lahteine
6e3556cb75 Merge pull request #3746 from esenapaj/patch-2 
Update Japanese translation
 2016-05-14 14:57:43 -07:00
Scott Lahteine
ddac17a195 Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ) 2016-05-14 14:52:08 -07:00
Scott Lahteine
b4c891dfd2 Remove obsolete reference to prepare_arc_move 2016-05-14 14:51:09 -07:00
Scott Lahteine
9f6b8f7d5b Remove extra @section directive from configs 2016-05-14 14:51:09 -07:00
Scott Lahteine
4d6bb52b26 Don't try to enable unused auto fans 
Addressing #3743
 2016-05-14 14:46:14 -07:00
Scott Lahteine
f13c4a9ec4 Merge pull request #3720 from jbrazio/feature/host-keepalive 
Removes the DISABLE from HOST_KEEPALIVE
 2016-05-14 14:39:31 -07:00
João Brázio
596f15348d
Updated pt_PT language pack 2016-05-14 01:45:15 +01:00
João Brázio
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics 2016-05-14 01:35:05 +01:00
AnHardt
8a4376d51f Idle during long arcs 
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
 2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e Enclose all #error strings with apostrophes 2016-05-13 21:10:23 +09:00
Petr Zahradnik
50b1a6bb2b Lastest changes in Czech translate 2016-05-13 13:51:13 +02:00
AnHardt
b74af78736 Make arc support (G2/G3) configurable 
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
 2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8 fix-FIX_MOUNTED_PROBE 
Add a forgotten condition
 2016-05-13 12:07:17 +02:00
esenapaj
e9d851137d Update Japanese translation 
・Add new translation
 2016-05-13 18:52:35 +09:00
Scott Lahteine
14cd0f4c92 Merge pull request #3740 from thinkyhead/rc_lcd_home_options 
Individual Axis Homing LCD menu items
 2016-05-12 11:59:46 -07:00
esenapaj
69511b5e5e Follow-up the PR #3719(Harmonize LCD comment section) 
It update forgotten Configuration_DUAL.h.
 2016-05-12 19:16:36 +09:00
Scott Lahteine
675e92ab1f Merge pull request #3738 from thinkyhead/rc_limit_i2c_request 
Print an error on bad i2c request
 2016-05-11 19:36:49 -07:00
João Brázio
09150cae79 Individual Axis Homing LCD menu items 2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f Add REVERSE_ENCODER_DIRECTION option 2016-05-11 15:39:28 -07:00
Scott Lahteine
aaeadf0cbd If no "B" parameter given, get 1 byte 2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b Print an error on bad i2c request 
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
 2016-05-11 15:30:02 -07:00
João Brázio
85b2c80838
Updated example configurations 2016-05-11 01:45:49 +01:00
João Brázio
ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option 2016-05-11 01:45:49 +01:00
Scott Lahteine
a454a88f9c Merge pull request #3722 from jbrazio/bugfix/printcounter 
Minor #warning fix for PrintCounter
 2016-05-10 17:17:04 -07:00
Scott Lahteine
03bda5c141 Merge pull request #3719 from jbrazio/feature/update-configs 
Harmonize LCD comment section
 2016-05-10 17:16:23 -07:00
Scott Lahteine
c827671299 Mention Z_PROBE_ALLEN_KEY in probe sanity checks 2016-05-10 13:50:20 -07:00
Scott Lahteine
be5d17de17 Merge pull request #3713 from thinkyhead/rc_file_offset_long 
Use code_value_long for potentially large values
 2016-05-10 09:15:53 -07:00
Scott Lahteine
56dd31ea3c Use code_value_long for potentially large values 
Addressing #3711
 2016-05-10 09:15:31 -07:00
João Brázio
eafa16a781
Minor #warning fix for PrintCounter 2016-05-10 14:14:54 +01:00
João Brázio
5373ac6373
Updated example configurations 2016-05-10 13:42:00 +01:00
João Brázio
aa5a4716cf
Update default config 2016-05-10 13:37:21 +01:00
esenapaj
1a75509a3c Cleanup for Danish file 
・Arrange the strings in unified order
・Remove "#ifdef DELTA_CALIBRATION_MENU" directive
・Adjust spacing
 2016-05-10 02:43:25 +09:00
esenapaj
cf6c607425 Update Japanese translation 
・Add new translation
・Add translation for 16 width ASCII LCD
・Change translation
・Revert translation from Japanese to English
・Fix typo
 2016-05-10 02:43:24 +09:00
Scott Lahteine
6f36b7c1cd Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x 
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
 2016-05-08 19:33:37 -07:00
Scott Lahteine
050e0bd2af Merge pull request #3705 from thinkyhead/rc_runaway_logic 
Fallthru in thermal runaway test when TRState changes
 2016-05-08 19:00:24 -07:00
Scott Lahteine
5f7ad16b19 Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move 
Fix dipping on DELTA robots during G29
 2016-05-08 18:42:57 -07:00
Scott Lahteine
96b71e62c0 Fix dipping on DELTA robots during G29 
- Addressing #3689, et. al.
 2016-05-08 18:28:46 -07:00
Scott Lahteine
ea1dd31851 Enclose #error strings with apostrophes in quotes 2016-05-08 18:08:39 -07:00
Scott Lahteine
9b92bb8f31 Set the initial state based on target temperature 2016-05-08 17:25:44 -07:00
Scott Lahteine
6b13c430ae The TRReset state is not needed with fall-through 2016-05-08 17:01:46 -07:00
Scott Lahteine
c2522ce1f5 Fallthru in thermal runaway test when TRState changes 2016-05-08 16:51:33 -07:00
Scott Lahteine
d32d9a3c5c Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags 
Cleanup and consolidate probe conditionals for clarity
 2016-05-08 16:42:22 -07:00
Scott Lahteine
15fc93d742 Cleanup and consolidate probe conditionals for clarity 2016-05-08 12:59:43 -07:00
Scott Lahteine
5ca6334fd2 Cleanup pins files, fixup analogtodigitalpin, etc. 2016-05-08 12:38:00 -07:00
esenapaj
9186be7b83 Fix compilation error in debugging code 
Fix compilation error in Thermal Runaway debugging code
 2016-05-09 01:57:21 +09:00
Scott Lahteine
51109d4af7 Use AxisEnum with _lcd_babystep() 2016-05-05 21:04:30 -07:00
Scott Lahteine
b65ea98d6b Localize babystepping in the Temperature class 
So that `ultralcd.cpp` doesn’t need to worry about the details.
 2016-05-05 15:00:31 -07:00
Scott Lahteine
0c7beb832c Merge pull request #3681 from esenapaj/patch-1 
Follow-up the PR #3643(Temperature singleton)
 2016-05-05 12:47:06 -07:00
Scott Lahteine
fc5fe2cc22 Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers 
Moved DELTA radius/rod default trimmer values to Conditionals.h
 2016-05-05 11:38:14 -07:00
esenapaj
1a97442d19 Follow-up the PR #3643(Temperature singleton) 
Follow-up the PR #3643(Temperature singleton)

・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.

・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.

・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
 2016-05-05 18:01:39 +09:00
Scott Lahteine
4f6120f70f Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature 
Temperature singleton
 2016-05-04 20:41:46 -07:00
Scott Lahteine
084f6b5b44 Temperature singleton class 2016-05-04 19:42:12 -07:00
Scott Lahteine
142bd3f3e7 Disable THERMAL_PROTECTION_BED with no sensor 2016-05-04 19:36:51 -07:00
Scott Lahteine
13f85a2b50 Can't use the ENABLED macro as a boolean 2016-05-04 16:33:57 -07:00
João Brázio
23567a1d8b
Moved DELTA radius/rod default trimmer values to Conditionals.h 2016-05-05 00:18:32 +01:00
Scott Lahteine
b4b5c7a6b7 Merge pull request #3670 from thinkyhead/rc_scoovo_controller 
Use directional buttons when defined
 2016-05-03 17:42:18 -07:00
Scott Lahteine
6398d497b3 Ultimate followup to Stepper/Planner patch 
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
 2016-05-03 17:07:37 -07:00
Scott Lahteine
ddafb859e2 Use directional buttons when defined 2016-05-03 12:50:49 -07:00
Scott Lahteine
b959020532 Merge pull request #3667 from esenapaj/patch-1 
Additional follow-up the PR #3631(Encapsulate S...
 2016-05-03 09:36:09 -07:00
esenapaj
212b17d510 Fix for PR #3526(Configuration.h LCD & SDCard s... 
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)

It removes duplicated BQ_LCD_SMART_CONTROLLER.
 2016-05-03 21:35:02 +09:00
esenapaj
605808fe37 Additional follow-up the PR #3631(Encapsulate S... 
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.

・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.

・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
 2016-05-03 18:28:37 +09:00
Scott Lahteine
7fd0243048 Cleanup, debug strings in Planner::adjusted_position 2016-05-02 20:11:27 -07:00
Scott Lahteine
85e732d5fd Fix BABYSTEPPING, add it to Travis test 2016-05-02 20:01:00 -07:00
Scott Lahteine
37c4970d87 Merge pull request #3660 from esenapaj/patch-2 
Follow-up the PR #3631(Encapsulate Stepper, ...
 2016-05-02 15:23:38 -07:00
Scott Lahteine
ad27d3c523 Merge pull request #3659 from esenapaj/patch-1 
Some clean-up for example configuration files
 2016-05-02 15:22:29 -07:00
Scott Lahteine
f1c1a8dc59 Merge pull request #3661 from Blue-Marlin/83filen2 
8.3-filenames second try
 2016-05-02 14:47:26 -07:00
Jochen Groppe
0bae00c1ed Merge pull request #3644 from tkurbad/german_translation 
Revisited German translation
 2016-05-02 16:46:19 +02:00
Blue-Marlin
5ad7d263e9 8.3-filenames second try 
Fix for #6 3593, #3648
this time excludung 'DEL' instead of accidently '~'.
 2016-05-02 15:58:04 +02:00
Torsten Kurbad
aae2f502e0 Revisited German translation 2016-05-02 15:18:12 +02:00
esenapaj
a82cfcff2d Follow-up the PR #3631(Encapsulate Stepper, ... 
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).

movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
 2016-05-02 22:04:26 +09:00
esenapaj
2fa4bc344c Some clean-up for example configuration files 
Some clean-up for example configuration files

Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)

Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h

Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing

Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
 2016-05-02 21:16:00 +09:00
Scott Lahteine
da47b83b3d Revert PR 3648 to fix SD printing 
The character 0x7E is common in 8.3 filenames. Maybe the last condition
should be removed completely instead.
 2016-05-01 18:04:04 -07:00
Scott Lahteine
60c6efb75c Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge 
Introduce temp watch protection for the bed
 2016-05-01 13:58:28 -07:00
Scott Lahteine
5b7a6c217a Include more fans in sensitive pins list 2016-05-01 13:49:32 -07:00
Scott Lahteine
f508c54c6c Use #undef in AZTEEG_X3_PRO for RAMPS overrides 2016-05-01 13:49:32 -07:00
Scott Lahteine
c6f1337f5c NOOP macro for do-nothing macros 2016-05-01 13:49:32 -07:00
Scott Lahteine
c2145566c7 Merge pull request #3631 from thinkyhead/rc_singletons 
Encapsulate Stepper, Planner, Endstops in singleton classes
 2016-05-01 13:47:47 -07:00
Scott Lahteine
fbf69081b4 Updated comment for THERMAL_PROTECTION_BED 2016-05-01 13:12:51 -07:00
gralco
908229dbb3 Introduce temp watch protection for the bed 
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.

Conflicts:
	Marlin/Configuration_adv.h
 2016-05-01 13:12:51 -07:00
Scott Lahteine
77d6e5283b Merge pull request #3648 from Blue-Marlin/83filenames 
Don't reject 8.3-filenames with chars > 0x7f
 2016-04-30 17:48:03 -07:00
Scott Lahteine
24a15332b3 Encapsulate dual Z endstop handling 2016-04-30 17:26:50 -07:00
Scott Lahteine
462a8a951e A little extra gcode_T spacing 2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f Planner singleton class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344 Localize M119 in Endstops class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8 Stepper and Endstops as singleton objects 2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f Prevent stuck M109/M190 when target is changed 2016-04-30 17:03:54 -07:00
Blue-Marlin
ac4caab8f1 Don't mangel 8.3-filenames with chars > 0x7f 
Don't mangel 8.3-filenames with chars > 0x7f

Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected
by Marlin until now.

With these 'malformed' filenames can now be worked with:
In the LCD menue
With RepetierHost (V1.6.1 tested) - full support. Characters are
displayed as '?'
With Octoprint (1.2.10 tested) the files do not appear in the files
area. At the console, listed with M20 they appear with a '�'.
With Pronterface the files appear in the sd-window but you can't start
them. They are mangled by pronterface. The names are altered and than
recected by Marlin. In the console they apper with differen but not the
correct characters.

All in all a little step forward.

Fix for #3593
 2016-04-30 17:37:22 +02:00
Scott Lahteine
eeef571be2 Merge pull request #3613 from thinkyhead/rc_acceleration_fix1 
Fix an acceleration anomaly by making locals signed
 2016-04-29 16:39:31 -07:00
Scott Lahteine
c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter 
Print job statistics
 2016-04-29 15:31:14 -07:00
Scott Lahteine
96b2b3f4fe Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps 
Keepalive not needed while waiting for temperatures
 2016-04-29 15:20:12 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files 2016-04-29 23:13:59 +01:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter 2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files 2016-04-29 23:13:59 +01:00
João Brázio
8fb23e899f
PrintCounter EEPROM read/write optimizations 2016-04-29 23:13:59 +01:00
João Brázio
9589e51810
Disable DEBUG_PRINTCOUNTER 2016-04-29 23:13:59 +01:00
João Brázio
e2da7e5000
Updated the default configuration and fixed a printcounter.h typo 2016-04-29 23:13:58 +01:00