Enchiridion
50cde90324
Added support for dual Z axis stepper drivers
2012-08-04 00:32:26 -06:00
ErikZalm
686011a548
Fixed typo
2012-07-14 17:25:35 +03:00
Erik van der Zalm
cd57bf305b
Merge git://github.com/daid/Marlin into Marlin_v1
...
Added invert step pins to corexy code
2012-07-14 15:07:14 +02:00
Erik van der Zalm
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
2012-07-14 14:21:53 +02:00
Erik van der Zalm
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
2012-07-14 13:43:19 +02:00
daid
12de8fff81
Support step motor controllers with active low step pins.
2012-06-29 16:27:47 +02:00
Erik van der Zalm
b67dacdc8f
Fixed AD595 define
2012-06-11 17:33:42 +02:00
Bernhard
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
2012-06-02 13:47:50 +02:00
Erik van der Zalm
6a5a34e0ff
Small cleanup
2012-04-30 13:37:49 +02:00
sefi
c27081aa4a
Fix to allow M120/M121
2012-04-28 17:35:51 +03:00
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
2012-04-15 19:17:33 +02:00
Erik van der Zalm
910f4e77a2
Added 20MHz support.
2012-03-11 12:25:04 +01:00
ErikZalm
7cefad3744
Merge pull request #106 from bgamari/Marlin_v1
...
Make F_CPU dependence of stepper.cpp more explicit
2012-03-11 01:48:30 -08:00
Erik van der Zalm
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
2012-03-11 10:44:10 +01:00
Ben Gamari
96509494f0
stepper: Clarify comment on timer-counter configuration
2012-03-07 18:11:01 -05:00
Erik van der Zalm
aac7aa3bf0
Queued fan control. Issue #90
2012-03-04 13:05:26 +01:00
Erik van der Zalm
072011a3ef
Added current_block = NULL to quickStop()
2012-03-03 20:40:46 +01:00
Blair Thompson
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
2012-03-03 15:51:47 +00:00
Erik van der Zalm
b4833d55c2
Fixed HOME_POS in combination with G28 X0 or G28 Y0
2012-02-28 18:20:03 +01:00
daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
Erik van der Zalm
9173a5713b
Teensylu support.
2012-02-09 19:27:45 +01:00
Erik van der Zalm
292ddd2edb
Fix Z_LATE_ENABLE
2012-02-06 17:38:16 +01:00
Erik van der Zalm
abb7e63906
fixed z-disable bug.
2012-02-05 21:14:55 +01:00
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
2012-02-05 12:42:15 +01:00
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
82c99625fa
instant stop of sd prints from the panel.
2011-12-11 22:10:06 +01:00
Bernhard
b1d84d879b
st_synchronize back to normal..
2011-12-09 16:13:58 +01:00
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
2011-12-09 12:32:31 +01:00
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
2011-12-07 23:08:13 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Erik van der Zalm
89e832c295
Update endstops only for homing. (use less resources when not used)
2011-12-04 21:03:02 +01:00
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
2011-12-04 20:17:21 +01:00
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
2011-12-04 19:54:43 +01:00
Erik van der Zalm
af22e9cd38
Some advance modifications
2011-12-04 19:54:07 +01:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
2011-12-02 17:45:05 +01:00
Bernhard
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
2011-11-28 21:36:01 +01:00
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
2011-11-27 21:12:55 +01:00
Bernhard
b128d25f27
overlooked some inlines..
2011-11-27 16:45:00 +01:00
Bernhard
4d6a5c29df
disable steppers as routine in stepper.cpp
2011-11-26 11:50:23 +01:00
Bernhard
a6823a84e1
another typo
2011-11-25 22:36:33 +01:00
Erik van der Zalm
27654bfe69
Fixed variable (removed 0x)
2011-11-25 22:10:06 +01:00
Erik van der Zalm
ac8adabb2b
Small nominal speed improvement.
2011-11-25 15:32:50 +01:00
Erik van der Zalm
0e0e4945d8
Removed ISR overtaken message from ISR routine
2011-11-25 13:59:58 +01:00
Erik van der Zalm
c0f8c9fd72
Seperate ENDSTOP_INVERTING for X Y and Z
...
Added simple endstop filter.
Corrected M114 count display.
2011-11-25 13:43:06 +01:00
Erik van der Zalm
4e5becfc51
Added endstop reporting
2011-11-20 14:50:08 +01:00
Erik van der Zalm
e7dca8614b
Advance experiments. Not working yet.
2011-11-18 18:59:17 +01:00
