Commit Graph

423 Commits

Author SHA1 Message Date
Scott Lahteine
b93be716cf Remove trailing whitespace 2017-05-02 17:53:40 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 2017-04-30 15:30:31 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
LVD-AC
ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
LVD-AC
d4f593d200 Delete 'expert level'
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's)
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
LVD-AC
03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
james94jeans2
5b9476fe78 Added z_fade_height to EEPROM-Settings
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00
Jimmy Envall
f78d44e91a Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Scott Lahteine
824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3 Finish name change
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Bob-the-Kuhn
549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
3b9ff2cb12 Merge pull request #5676 from Bob-the-Kuhn/configuration.h
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6 # This is a combination of 2 commits.
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a5abc61fb9 Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
M43 - add Toggle utility and Z servo utility (replaces PR #5864)
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09 improved wording, consolidation of info, BLTouch warning
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c add Z servo test and toggle pins to M43 2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00