Commit Graph

119 Commits

Author SHA1 Message Date
Scott Lahteine
5aff43e65e Rename float32 => float52, etc. 2018-05-01 04:41:56 -05:00
Scott Lahteine
6f8717ce12 Fix LIGHTWEIGHT_UI with UBL
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
2018-04-08 03:11:53 -05:00
Scott Lahteine
040ebd1675 Use lcd_printPGM_utf in more places
Fix #10256
2018-03-31 20:47:20 -05:00
Shen Yiming
96c54c188a Fix MKS_12864_OLED blank issue #10071 (#10094) 2018-03-13 04:51:21 -05:00
Scott Lahteine
4dad8628ff Move MKS_12864OLED to lcd_implementation_init 2018-03-12 08:51:48 -05:00
Scott Lahteine
b01f10dfac Fix custom bootscreen compiler warning 2018-03-04 23:37:32 -06:00
Scott Lahteine
1c95c13224 Lightweight status screen for ST7920
- This status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.
2018-02-22 00:46:25 -06:00
Scott Lahteine
126a80ea83
Reduce Creality3D bootscreens flash usage (#9745) 2018-02-21 16:08:27 -06:00
Scott Lahteine
35800eec02 Fix big edit font width calculation
Fix #9685
2018-02-20 06:43:48 -06:00
Scott Lahteine
a1f0d9d349 Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT 2018-02-17 15:41:20 -06:00
Scott Lahteine
e2fef4df6f Fix #9201
FILAMENT_LCD_DISPLAY and SDSUPPORT are a-ok together.
2018-02-14 03:28:05 -06:00
GMagician
03f27a5e41 [1.1.x] Fix compile warning (#9540) 2018-02-08 17:59:24 -06:00
Project-J²
ae2476dfdb Add UltiController v2.1 support
Add compatibility with the original screen bord from Ultimaker 2 printer
(UltiController v2.1 with the PG-2864ALBP I2C display)
2018-02-05 22:24:08 -06:00
Scott Lahteine
1352acdf75 Adjustment to DOG_CHAR_*_EDIT 2018-02-05 20:24:18 -06:00
GMagician
14b7c8cf51 [1.1.x] Fix temperature out of LCD
Fix bug introduced in #9381

Original code was 18-chars*6 hence reversed number in if statements
2018-02-03 22:58:26 +01:00
Scott Lahteine
8bccd0ef5b Fix up _Bootscreen.h and _Statusscreen.h
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
2018-02-02 00:55:02 -06:00
Scott Lahteine
292755258a Add a heating indicator X offset 2018-01-21 01:58:40 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Tommie Gannert
f3f26f7cb3 Creality Ender support.
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
2018-01-15 03:39:43 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Dan Delaney
df8420aa62 Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
Scott Lahteine
8519451161 Comment, improve filament width sensor 2017-12-13 02:35:23 -06:00
Scott Lahteine
d8ef6faa80 Cleanup for dogm_bitmaps 2017-12-04 21:19:59 -06:00
Scott Lahteine
bf6a1816b4 Display volumetric ratio in terms of E mm 2017-11-18 07:03:18 -06:00
Scott Lahteine
eb3bdb7550 Fix FILAMENT_LCD_DISPLAY, disabled state, optimize 2017-11-16 17:46:08 -06:00
Scott Lahteine
3293823642 Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
Scott Lahteine
640526f0c8 Operate in Native Machine Space 2017-11-03 22:40:30 -05:00
AnHardt
13a3fb1acc Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:16:42 +01:00
Scott Lahteine
db6de76acb Only show custom bootscreen once 2017-10-31 01:52:35 -05:00
Scott Lahteine
91c5c2538a Add SCROLL_LONG_FILENAMES advanced option
Based on #7637 by @marcio-ao
2017-10-20 19:14:10 -05:00
Scott Lahteine
5f708d47ce Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 02:21:09 -05:00
Scott Lahteine
381ebc043f Add support for ST7565-64128N
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94 Add some new LCD displays
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
Scott Lahteine
53f2f188f2 LCD filename already concatenated 2017-10-07 15:11:28 -05:00
Dave Johnson
97e6663bb3 [1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878)
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM.
add HD44780 too

* Reduce lines used

* Reduce lines used
2017-10-07 15:00:56 -05:00
Scott Lahteine
dac5f20a01 Patch SD file draw bug 2017-10-06 23:53:08 -05:00
Roman Moravčík
2a46ab288e Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
João Brázio
2065591daf Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Scott Lahteine
ae5923a3d0 Make lcd_bootscreen common to both 2017-07-02 00:47:36 -05:00
Scott Lahteine
b492e0878d Changes to reduce and simplify 2017-06-28 01:10:30 -05:00
Tannoo
e90cbf5c16 UBL Map Cleanup 2017-06-27 22:51:58 -05:00
Scott Lahteine
424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00