Scott Lahteine
0cf0c20532
Optimize calculate_volumetric_multiplier
2015-02-23 18:10:35 -08:00
domonoky
38500165ea
First attempt at adding TMC Driver support. May need some cleanup.
2015-02-23 17:45:29 +01:00
domonoky
b55995aae8
Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation.
2015-02-23 16:12:35 +01:00
Gege2B
b4e9395661
Corrected a typo in ArduinoAddons/Arduino_1.5.x/(...)/avr/boards.txt about Sanguino
2015-02-23 16:02:04 +01:00
maverikou
a9e15aa503
Updated example configurations
2015-02-22 20:15:05 +02:00
Scott Lahteine
3ba47ea277
Remove test/demo multi=line code menu items
2015-02-22 10:10:37 -08:00
alexborro
a57869ba49
Dummy Thermistor Table for testing purposes
...
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
2015-02-22 11:02:04 -03:00
Maverikou
2e166f5337
Added support for PanelOne from T3P3.
2015-02-22 09:14:43 +02:00
Scott Lahteine
40ef472a25
Merge in encoder multiplier
2015-02-21 20:18:49 -08:00
Scott Lahteine
c3c50528e6
Merge pull request #1521 from thinkyhead/fixup_encoder_code
...
Encoder multiplier - revised code
2015-02-21 19:44:53 -08:00
Scott Lahteine
1c13cd604b
Formatting in babysteps defines
2015-02-21 18:45:10 -08:00
Scott Lahteine
3a26804d80
Adapt to latest PID code and fix typos
2015-02-21 18:41:04 -08:00
Scott Lahteine
422582da71
Prep formatting for upcoming PR
2015-02-21 18:24:16 -08:00
Scott Lahteine
27ac3e985d
Add options to example_configurations
2015-02-21 18:17:37 -08:00
Scott Lahteine
0d6a7a2df0
Merge with latest upstream changes
2015-02-21 18:13:31 -08:00
Scott Lahteine
c7a97e18b7
Merge branch 'Development' into cleanup_ultralcd
...
Latest upstream changes
2015-02-21 18:04:08 -08:00
Scott Lahteine
6d5c13df74
Merge pull request #1520 from thinkyhead/fixup_temperature
...
Fix typos in checkExtruderAutoFans
2015-02-21 17:53:26 -08:00
Scott Lahteine
5b9e341222
Merge pull request #1516 from thinkyhead/fixup_ramps
...
Cleanup ramps boards
2015-02-21 17:51:57 -08:00
Scott Lahteine
57bc28b42c
Cleanup and fix ultralcd.cpp
...
- Fix bug in lcd_control_temperature_menu
- Remove test menu-item left in from multi-line command feature
- Replace literals with translatable strings
- Reduce lcd_preheat code redundancy
- Reduce menu macro redundancy
- Clean up formatting
2015-02-21 17:38:56 -08:00
Scott Lahteine
4fcd4b444e
Merge pull request #1519 from thinkyhead/fix_recent_issues
...
Fix implementation of PID menu items
2015-02-21 16:43:11 -08:00
Scott Lahteine
9c35ed149d
Merge pull request #1508 from AnHardt/iss1492
...
Fix iss#1492
2015-02-21 16:26:37 -08:00
Scott Lahteine
430c4b6538
Replace missing backslash
2015-02-20 02:17:16 -08:00
Scott Lahteine
a8939eec28
Readability of MENU_MULTIPLIER_ITEM
...
Last commit before bed.
2015-02-20 02:08:41 -08:00
Scott Lahteine
09e09b308e
Tweaky spacing adjustments
2015-02-20 01:22:56 -08:00
Scott Lahteine
e3fd3e8fa4
Fix typos in checkExtruderAutoFans
2015-02-20 00:08:59 -08:00
Scott Lahteine
c610471b0c
Add PID_PARAMS_PER_EXTRUDER conditional
2015-02-20 00:00:19 -08:00
Scott Lahteine
2d6fa9ce80
Proper implementation of PID menu items
...
- Make this work per #1344
2015-02-19 23:54:06 -08:00
wgm4321
b8e79dce89
Fix compilation errors when encoder multiplier is disabled
2015-02-19 21:51:23 -05:00
wgm4321
65e1fc71be
Add encoder rate multiplier
2015-02-19 21:42:57 -05:00
Scott Lahteine
c9465c33cf
Merge branch 'thinkyhead-fixup_ramps_boards' into Development
...
Merge resolving conflicts
2015-02-19 17:36:49 -08:00
Scott Lahteine
623119619c
Merge branch 'fixup_ramps_boards' of https://github.com/thinkyhead/Marlin into thinkyhead-fixup_ramps_boards
...
Merge commit
2015-02-19 17:36:00 -08:00
Scott Lahteine
859c8d3fef
Azteeg X3 overrides too
2015-02-19 17:28:38 -08:00
Scott Lahteine
7891eacf21
Merge branch 'Development' into fixup_ramps_boards
...
- Also apply cleanup for #1514
2015-02-19 17:26:22 -08:00
Scott Lahteine
b12cd1f841
Merge pull request #1514 from 2PrintBeta/Development
...
Initial definitions for the Boards BAM&DICE + BAM&DICE Due
2015-02-19 17:17:34 -08:00
domonoky
15b73386b5
Add pin definitions for the Boards BAM&DICE + BAM&DICE Due
2015-02-19 11:53:31 +01:00
Scott Lahteine
08c236059e
Merge pull request #1505 from thinkyhead/issue_1499
...
Bed leveling probe behavior issue?
2015-02-19 01:24:17 -08:00
Scott Lahteine
ab419795b3
Merge pull request #1511 from MagoKimbra/Reset_Alert_message_M600
...
Reset Alert message when finish M600 command
2015-02-19 01:19:56 -08:00
MagoKimbra
159196d1e9
Reset Alert message when finish M600 command
2015-02-18 21:33:38 +01:00
daid
266ff227cf
Merge pull request #1510 from docdawning/Development
...
Trivial spelling correction
2015-02-17 20:59:32 +01:00
DocDawning
dfd4e74a5c
Trivial spelling correction
2015-02-17 12:37:05 -07:00
AnHardt
6cdcd6c6d1
Fix iss#1492
...
Introduced lcd_strlen() and lcd_strlen_P().
Replaced the old functions where necessary.
Reworked language_ru.h.
Speeded up test for zero length string in cardreader.cpp
2015-02-16 13:53:58 +01:00
Scott Lahteine
63a5ff7ab9
Merge pull request #1489 from tommil/Development
...
Updated Finnish language file
2015-02-15 23:02:11 -08:00
Scott Lahteine
efb0491d40
Merge branch 'Development' into issue_1499
...
Merging latest upstream changes
2015-02-15 22:59:07 -08:00
Scott Lahteine
961998cf91
Merge pull request #1496 from thinkyhead/issue_1493
...
Megatronics 3 servo pins
2015-02-15 22:00:14 -08:00
Scott Lahteine
59e92a2db4
Merge pull request #1506 from thinkyhead/issue_1504
...
Issue #1504 – K8200 Z_ENABLE_PIN
2015-02-15 21:59:30 -08:00
Scott Lahteine
b71322e793
Issue #1504 – K8200 Z_ENABLE_PIN
...
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
2015-02-15 21:56:23 -08:00
Scott Lahteine
978d114c73
Bed leveling probe behavior issue?
...
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
2015-02-15 20:51:27 -08:00
Scott Lahteine
7c6236761a
Merge branch 'Development' into issue_1493
...
Merging latest upstream changes
2015-02-15 20:45:35 -08:00
MarcelMo
d28f5b9e82
Support for simple customisable AutoZProbing area
...
When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size).
Not much code, but very useful.
Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling.
I used int for values... might be wrong...
I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits )
2015-02-15 15:58:29 +01:00
Tommi Lamberg
3e6ae25481
Merge branch 'Development' of https://github.com/tommil/Marlin into Development
2015-02-15 12:21:57 +02:00
