MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,459 Commits 1 Branch 0 Tags 96 MiB
ed605e77fa
Commit Graph

343 Commits

Author SHA1 Message Date
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Bob-the-Kuhn
3b8926bd09 improved wording, consolidation of info, BLTouch warning 
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
 2017-04-06 16:06:01 -05:00
Scott Lahteine
d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine
9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy 
Support for TinyBoy 2 3D printer (and its OLED display)
 2017-03-31 04:31:47 -05:00
Stefan Brüns
0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel 
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
 2017-03-31 04:05:34 -05:00
Scott Lahteine
edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Stefan Brüns
5699e2b881 Add SOFT_PWM_DITHER to other configurations 2017-03-24 05:02:24 -05:00
Scott Lahteine
783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 2017-03-24 00:44:55 -05:00
Scott Lahteine
e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Scott Lahteine
2512871a36 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15 Move Allen Key probe definition to the top 2017-03-18 12:27:37 -05:00
Scott Lahteine
cf94688925 Univeral Bed Leveling - configuration 2017-03-18 11:35:19 -05:00
Scott Lahteine
0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Marek Pikuła
7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Colin Gilgenbach
48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag 
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
 2017-02-25 21:52:43 -06:00
Scott Lahteine
e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
esenapaj
d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Scott Lahteine
5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
Scott Lahteine
da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop 
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
 2016-12-08 00:12:19 -08:00
Scott Lahteine
aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine
415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led 
Support for an RGB LED using 3 pins
 2016-11-30 14:14:00 -06:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
jes
f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted 
Support for COREYX, COREZX, COREZY
 2016-11-28 02:26:41 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
Scott Lahteine
eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature 
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
 2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts 
Introduce endstop interrupts
 2016-11-18 20:50:24 -06:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const 
Replace const bool with #define for consistency
 2016-11-17 03:37:32 -06:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
AnHardt
f3eee02596 Introduce endstop interrupts 
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
 2016-11-15 12:07:41 +01:00
esenapaj
2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc 
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
 2016-11-09 06:31:21 +09:00
Scott Lahteine
e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D
2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Scott Lahteine
0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical 
Fix manual leveling coordinates
 2016-10-22 06:31:02 -05:00
Scott Lahteine
14e60f0d3b Correct typo in configs 
As pointed out by #5044
 2016-10-22 05:56:32 -05:00
Scott Lahteine
4f6bfabaad Patch BAUDRATE line in configs 2016-10-22 00:48:52 -05:00
Scott Lahteine
1e551c0688 Revert "Squashed - Removal of PID functional range" 2016-10-09 16:27:45 -05:00
Rerouter
5f5d87cad3 Update Configuration.h 2016-10-02 07:01:40 -05:00
Scott Lahteine
d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 06:34:56 -05:00
Scott Lahteine
473f4a17a8 Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp 
Pid unconstrained itemp
 2016-10-01 06:58:07 -05:00
Scott Lahteine
fffc9fefa8 Apply changes to all configs 2016-09-29 02:17:33 -05:00
Scott Lahteine
2d2c9bdf92 Add PROBE_Y_FIRST option for probe order 2016-09-29 02:00:27 -05:00
esenapaj
92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
 2016-09-28 14:14:04 -05:00
Scott Lahteine
ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Scott Lahteine
01f1028510 Try on "CLEARANCE" for size 2016-09-20 18:29:49 -05:00
Scott Lahteine
0e7d638a7a Revert to Probe Raise rather than Probe Height 2016-09-20 18:29:49 -05:00
Scott Lahteine
e05af606a8 Clean up probe config options 2016-09-19 00:26:16 -05:00
Scott Lahteine
c4dcfa254e Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH 2016-09-18 22:00:32 -05:00
Scott Lahteine
e5505e3b33 Allow non-square leveling grid 2016-09-18 13:11:20 -05:00
Scott Lahteine
a1812b55f6 Space out array values 2016-09-16 14:41:05 -05:00
Scott Lahteine
d4599fd8ed Comment patches to Configuration.h 2016-09-16 14:41:05 -05:00
Scott Lahteine
723e983073 Default EXTRUDE_MAXLENGTH to 200mm 2016-09-16 14:41:04 -05:00
Scott Lahteine
a6f6ed352b Fix comment on FILAMENT_RUNOUT_SENSOR 2016-09-13 02:14:34 -05:00
Scott Lahteine
aaef7c6b89 Fix a misspelling of minimum 2016-09-02 01:42:38 -05:00
Scott Lahteine
f1201e11c7 Improve the Jerk description 2016-08-29 12:39:21 -05:00
Scott Lahteine
3f038bef00 Heading for movement settings 2016-08-29 02:01:34 -05:00
Scott Lahteine
01d4703429 PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION 
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
 2016-08-20 23:35:27 -05:00
Scott Lahteine
99b22d5785 Default AUTO_BED_LEVELING_GRID_POINTS to 3 2016-08-19 04:45:32 -05:00
Scott Lahteine
e113740fa3 Specify that Z_PROBE_*_HEIGHT is nozzle-relative 2016-08-07 17:54:17 -07:00
Scott Lahteine
7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
esenapaj
657ef8aded Follow-up the PR #4408 (Add support for reprapworld LCD), etc 
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
 2016-07-30 20:32:57 +09:00
Scott Lahteine
9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature 
double bump probing as a feature
 2016-07-29 20:00:10 -07:00
AnHardt
7188ce0ad6 double bump probing as a feature 
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
 2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00
Scott Lahteine
ea5ac94804 Improved MANUAL_[XYZ]_HOME_POS 
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
 2016-07-28 19:51:48 -07:00
Scott Lahteine
8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
Scott Lahteine
24a1a16e5d Move versioning to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine
277899c175 Move include _Bootscreen.h where needed 2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71 Include boards and macros ahead of configs 2016-07-26 12:19:50 -07:00
Scott Lahteine
c6226bb0aa Unify config in a single include without nested includes 2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b No need to include thermistortables.h in Configuration.h 2016-07-25 22:43:50 -07:00
Scott Lahteine
bb9da6ebdd Document DEBUG_LEVELING_FEATURE 2016-07-22 23:37:41 -07:00
Scott Lahteine
194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe 
Unify run_z_probe
 2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221 Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST 2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6 Unify run_z_probe 
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
 2016-07-19 18:42:48 -07:00
Scott Lahteine
e44b37cdc2 motion section marker below homing speeds 2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
Scott Lahteine
6abf916575 Reprapworld Keypad move step is 1mm 2016-07-19 16:40:39 -07:00
João Brázio
b869fbc05e Update all config files with the new G12 options 2016-07-19 15:07:03 -07:00
Scott Lahteine
81e01152bb Merge pull request #4336 from thinkyhead/rc_bltouch_sensor 
BLTouch probe sensor
 2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4 BLTOUCH probe config option 2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57 Endstop invert flags as macros instead of const bool 2016-07-17 13:51:02 -07:00
Scott Lahteine
671634bf11 Fix spacing after section header 2016-07-17 13:35:21 -07:00
Scott Lahteine
22b4cff423 New extruder type configuration options 2016-07-17 00:13:56 -07:00
Scott Lahteine
bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle 
Implements park nozzle feature
 2016-07-16 23:47:12 -07:00
João Brázio
dfa1c45075 Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive 2016-07-17 01:15:17 +01:00
João Brázio
9a00108cb6 Adds the WEBSITE_URL as the boot screen line 2 2016-07-16 12:24:37 +01:00
João Brázio
336481ea81 Added G27 configuration options to all configs 2016-07-16 12:07:59 +01:00
João Brázio
68c343a09a Added G12 configuration options to all configs 2016-07-14 00:38:42 +01:00
Scott Lahteine
a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine
928ff6487a Greek language pack from @psavva 2016-07-10 18:59:04 -07:00
Scott Lahteine
182c8d7f8f Dyze High Temp Thermistor Support 2016-07-10 17:59:05 -07:00
Scott Lahteine
1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63 Print job timer comment changed 2016-07-09 17:57:54 -07:00
Scott Lahteine
683975cf90 Fix spelling in a config comment 2016-06-28 16:49:13 -07:00
Scott Lahteine
10da7ac86c Combine Z raise before/after options 2016-06-26 13:56:30 -07:00
Scott Lahteine
03c70c1990 SERVO_DEACTIVATION_DELAY => SERVO_DELAY 2016-06-23 14:33:29 -07:00
Scott Lahteine
bd01592816 Goodbye MECHANICAL_PROBE 2016-06-22 17:13:33 -07:00
Scott Lahteine
b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 2016-06-22 14:00:44 -07:00
Scott Lahteine
d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
esenapaj
d583ea852d Standardize format description of Panel 2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49 Move code block of probe to appropriate position 2016-06-21 20:36:46 +09:00
esenapaj
740fb2ce39 Adjust spacing 2016-06-21 19:37:45 +09:00
Scott Lahteine
3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine
9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup 
FIL_RUNOUT_INVERTING false by default
 2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl 
Make Z Probe options independent of ABL
 2016-06-19 19:44:25 -07:00
Scott Lahteine
dfbf8b3c2c FIL_RUNOUT_INVERTING false by default 2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine
f8c278ce4d Cartesio UI display option in all configs 2016-06-19 17:39:46 -07:00
Scott Lahteine
bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe 
Make M851 standard with a bed probe
 2016-06-17 17:32:55 -07:00
Scott Lahteine
fc56a547d1 Rename movement section to motion 2016-06-17 15:19:43 -07:00
Scott Lahteine
1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine
47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
Scott Lahteine
02e5dad29a Include Croatian in language listings 2016-06-16 16:18:26 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files 2016-06-12 00:36:15 +01:00
Reid Rankin
16212432c9 G20/21 and M149 support, and code_value() refactor 
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
 2016-06-08 16:51:10 -07:00
Scott Lahteine
cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine
db0fd021d0 Z raise options independent of ABL so G28 can use them 2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994 Tweak #endif comment for ABL GRID 2016-06-02 16:56:49 -07:00
Scott Lahteine
a0b000d752 Support for SAV_3DGLCD OLED LCD controller 2016-05-31 14:41:16 -07:00
Edward Patel
92a27c37b3 MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations 2016-05-30 09:50:11 +02:00
Scott Lahteine
fe3122774a Merge pull request #3806 from thinkyhead/rc_coreyz_support 
Support for COREYZ. Fixes for COREXY, COREXZ
 2016-05-26 18:50:43 -07:00
Scott Lahteine
89e630b2fb Merge pull request #3808 from thinkyhead/rc_singlenozzle 
SINGLENOZZLE
 2016-05-23 15:52:19 -07:00
Scott Lahteine
95fee8ca81 Add option for CoreYZ kinematics 2016-05-23 13:58:40 -07:00
Scott Lahteine
c5130fd23b Additional instructions for controller reverse options 2016-05-20 18:14:50 -07:00
Scott Lahteine
69abfef82e Add "SINGLENOZZLE" extruder option 2016-05-20 15:45:11 -07:00
Scott Lahteine
1a6c72cb57 Apply to the rest of the configs 2016-05-20 11:52:27 -07:00
João Brázio
f9a62f6a8e Added PRINTJOB_TIMER_AUTOSTART section to example config files 2016-05-14 15:22:45 -07:00
Scott Lahteine
f13c4a9ec4 Merge pull request #3720 from jbrazio/feature/host-keepalive 
Removes the DISABLE from HOST_KEEPALIVE
 2016-05-14 14:39:31 -07:00
Scott Lahteine
14cd0f4c92 Merge pull request #3740 from thinkyhead/rc_lcd_home_options 
Individual Axis Homing LCD menu items
 2016-05-12 11:59:46 -07:00
João Brázio
09150cae79 Individual Axis Homing LCD menu items 2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f Add REVERSE_ENCODER_DIRECTION option 2016-05-11 15:39:28 -07:00
João Brázio
85b2c80838
Updated example configurations 2016-05-11 01:45:49 +01:00
João Brázio
5373ac6373
Updated example configurations 2016-05-10 13:42:00 +01:00
esenapaj
212b17d510 Fix for PR #3526(Configuration.h LCD & SDCard s... 
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)

It removes duplicated BQ_LCD_SMART_CONTROLLER.
 2016-05-03 21:35:02 +09:00
esenapaj
2fa4bc344c Some clean-up for example configuration files 
Some clean-up for example configuration files

Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)

Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h

Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing

Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
 2016-05-02 21:16:00 +09:00
Scott Lahteine
c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter 
Print job statistics
 2016-04-29 15:31:14 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files 2016-04-29 23:13:59 +01:00