/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Czech * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * * Translated by Petr Zahradnik, Computer Laboratory * Blog and video blog Zahradnik se bavi * http://www.zahradniksebavi.cz * */ #ifndef LANGUAGE_CZ_H #define LANGUAGE_CZ_H #define MAPPER_NON // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h //#define SIMULATE_ROMFONT #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " pripraven." #define MSG_SD_INSERTED "Karta vlozena" #define MSG_SD_REMOVED "Karta vyjmuta" #define MSG_LCD_ENDSTOPS "Endstopy" // maximalne 8 znaku #define MSG_MAIN "Hlavni nabidka" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Uvolnit motory" #define MSG_AUTO_HOME "Domovska pozice" #define MSG_AUTO_HOME_X "Domu osa X" #define MSG_AUTO_HOME_Y "Domu osa Y" #define MSG_AUTO_HOME_Z "Domu osa Z" #define MSG_LEVEL_BED_HOMING "Mereni podlozky" #define MSG_LEVEL_BED_WAITING "Kliknutim spustte" #define MSG_LEVEL_BED_NEXT_POINT "Dalsi bod" #define MSG_LEVEL_BED_DONE "Mereni hotovo!" #define MSG_LEVEL_BED_CANCEL "Storno" #define MSG_SET_HOME_OFFSETS "Nastavit ofsety" #define MSG_HOME_OFFSETS_APPLIED "Ofsety nastaveny" #define MSG_SET_ORIGIN "Nastavit pocatek" #define MSG_PREHEAT_1 "Zahrat PLA" #define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Vse" #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Podloz" #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Nast" #define MSG_PREHEAT_2 "Zahrat ABS" #define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Vse" #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Podloz" #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Nast" #define MSG_H1 "1" #define MSG_H2 "2" #define MSG_H3 "3" #define MSG_H4 "4" #define MSG_COOLDOWN "Zchladit" #define MSG_SWITCH_PS_ON "Zapnout napajeni" #define MSG_SWITCH_PS_OFF "Vypnout napajeni" #define MSG_EXTRUDE "Vytlacit (extr.)" #define MSG_RETRACT "Zatlacit (retr.)" #define MSG_MOVE_AXIS "Posunout osy" #define MSG_LEVEL_BED "Vyrovnat podlozku" #define MSG_MOVE_X "Posunout X" #define MSG_MOVE_Y "Posunout Y" #define MSG_MOVE_Z "Posunout Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_E1 "1" #define MSG_MOVE_E2 "2" #define MSG_MOVE_E3 "3" #define MSG_MOVE_E4 "4" #define MSG_MOVE_01MM "Posunout o 0,1mm" #define MSG_MOVE_1MM "Posunout o 1mm" #define MSG_MOVE_10MM "Posunout o 10mm" #define MSG_SPEED "Rychlost" #define MSG_BED_Z "Vyska podl." #define MSG_NOZZLE "Tryska" #define MSG_N1 " 1" #define MSG_N2 " 2" #define MSG_N3 " 3" #define MSG_N4 " 4" #define MSG_BED "Podlozka" #define MSG_FAN_SPEED "Rychlost vent." #define MSG_FLOW "Prutok" #define MSG_CONTROL "Ovladani" #define MSG_MIN " " LCD_STR_THERMOMETER " Min" #define MSG_MAX " " LCD_STR_THERMOMETER " Max" #define MSG_FACTOR " " LCD_STR_THERMOMETER " Fakt" #define MSG_AUTOTEMP "Autoteplota" #define MSG_ON "Zap" #define MSG_OFF "Vyp" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_E1 " E1" #define MSG_E2 " E2" #define MSG_E3 " E3" #define MSG_E4 " E4" #define MSG_ACC "Zrychl" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retrakt" #define MSG_A_TRAVEL "A-prejezd" #define MSG_XSTEPS "Xkroku/mm" #define MSG_YSTEPS "Ykroku/mm" #define MSG_ZSTEPS "Zkroku/mm" #define MSG_ESTEPS "Ekroku/mm" #define MSG_TEMPERATURE "Teplota" #define MSG_MOTION "Pohyb" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E na mm3" #define MSG_FILAMENT_DIAM "Fil. Prum." #define MSG_DIAM_E1 " 1" #define MSG_DIAM_E2 " 2" #define MSG_DIAM_E3 " 3" #define MSG_DIAM_E4 " 4" #define MSG_CONTRAST "Kontrast LCD" #define MSG_STORE_EPROM "Ulozit nastaveni" #define MSG_LOAD_EPROM "Nacist nastaveni" #define MSG_RESTORE_FAILSAFE "Obnovit vychozi" #define MSG_REFRESH "Obnovit" #define MSG_WATCH "Info obrazovka" #define MSG_PREPARE "Priprava tisku" #define MSG_TUNE "Doladeni tisku" #define MSG_PAUSE_PRINT "Pozastavit tisk" #define MSG_RESUME_PRINT "Obnovit tisk" #define MSG_STOP_PRINT "Zastavit tisk" #define MSG_CARD_MENU "Tisknout z SD" #define MSG_NO_CARD "Zadna SD karta" #define MSG_DWELL "Uspano..." #define MSG_USERWAIT "Cekani na uziv..." #define MSG_RESUMING "Obnovovani tisku" #define MSG_PRINT_ABORTED "Tisk zrusen" #define MSG_NO_MOVE "Zadny pohyb." #define MSG_KILLED "PRERUSENO. " #define MSG_STOPPED "ZASTAVENO. " #define MSG_CONTROL_RETRACT "Retrakt mm" #define MSG_CONTROL_RETRACT_SWAP "Vymena Re.mm" #define MSG_CONTROL_RETRACTF "Retraktovat V" #define MSG_CONTROL_RETRACT_ZLIFT "Zvednuti Z mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Vymenit filament" #define MSG_INIT_SDCARD "Nacist SD kartu" #define MSG_CNG_SDCARD "Vymenit SD kartu" #define MSG_ZPROBE_OUT "Sonda Z mimo podl" #define MSG_HOME "Domu" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "prvni" #define MSG_ZPROBE_ZOFFSET "Z ofset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_HEATING_FAILED_LCD "Chyba zahrivani" #define MSG_ERR_REDUNDANT_TEMP "Chyba: REDUNDANTNI TEPLOTA" #define MSG_THERMAL_RUNAWAY "TEPLOTNI SKOK" #define MSG_ERR_MAXTEMP "Chyba: VYSOKA TEPLOTA" #define MSG_ERR_MINTEMP "Chyba: NIZKA TEPLOTA" #define MSG_ERR_MAXTEMP_BED "Chyba: VYSOKA TEPLOTA PODL." #define MSG_ERR_MINTEMP_BED "Chyba: NIZKA TEPLOTA PODL." #define MSG_END_HOUR "hod" #define MSG_END_MINUTE "min" #define MSG_HEATING "Zahrivani..." #define MSG_HEATING_COMPLETE "Zahrati hotovo." #define MSG_BED_HEATING "Zahrivani podl." #define MSG_BED_DONE "Podlozka hotova." #define MSG_DELTA_CALIBRATE "Delta Kalibrace" #define MSG_DELTA_CALIBRATE_X "Kalibrovat X" #define MSG_DELTA_CALIBRATE_Y "Kalibrovat Y" #define MSG_DELTA_CALIBRATE_Z "Kalibrovat Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibrovat Stred" #define MSG_INFO_MENU "O tiskarne" #define MSG_INFO_PRINTER_MENU "Info o tiskarne" #define MSG_INFO_STATS_MENU "Statistika" #define MSG_INFO_BOARD_MENU "Info o desce" #define MSG_INFO_THERMISTOR_MENU "Termistory" #define MSG_INFO_EXTRUDERS "Extrudery" #define MSG_INFO_BAUDRATE "Rychlost" #define MSG_INFO_PROTOCOL "Protokol" #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT "Pocet tisku " #define MSG_INFO_FINISHED_PRINTS "Dokonceno " #define MSG_INFO_PRINT_TIME "Celkovy cas " #else #define MSG_INFO_PRINT_COUNT "Tisky " #define MSG_INFO_FINISHED_PRINTS "Hotovo " #define MSG_INFO_PRINT_TIME "Cas " #endif #define MSG_INFO_MIN_TEMP "Teplota min" #define MSG_INFO_MAX_TEMP "Teplota max" #define MSG_INFO_PSU "Nap. zdroj" #define MSG_FILAMENT_CHANGE_HEADER "VYMENA FILAMENTU" #define MSG_FILAMENT_CHANGE_OPTION_HEADER "CO DAL?" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Jeste vytlacit" #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Obnovit tisk" #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 "Cekejte prosim" #define MSG_FILAMENT_CHANGE_INIT_2 "na zahajeni" #define MSG_FILAMENT_CHANGE_INIT_3 "vymeny filamentu" #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Cekejte prosim" #define MSG_FILAMENT_CHANGE_UNLOAD_2 "na vysunuti" #define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamentu" #define MSG_FILAMENT_CHANGE_INSERT_1 "Vlozte filament" #define MSG_FILAMENT_CHANGE_INSERT_2 "a stisknete" #define MSG_FILAMENT_CHANGE_INSERT_3 "tlacitko..." #define MSG_FILAMENT_CHANGE_LOAD_1 "Cekejte prosim" #define MSG_FILAMENT_CHANGE_LOAD_2 "na zavedeni" #define MSG_FILAMENT_CHANGE_LOAD_3 "filamentu" #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Cekejte prosim" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "na vytlaceni" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamentu" #define MSG_FILAMENT_CHANGE_RESUME_1 "Cekejte prosim" #define MSG_FILAMENT_CHANGE_RESUME_2 "na pokracovani" #define MSG_FILAMENT_CHANGE_RESUME_3 "tisku" #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 "Cekejte..." #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vysouvani..." #define MSG_FILAMENT_CHANGE_INSERT_1 "Vlozte, kliknete" #define MSG_FILAMENT_CHANGE_LOAD_1 "Zavadeni..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vytlacovani..." #define MSG_FILAMENT_CHANGE_RESUME_1 "Pokracovani..." #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_CZ_H